Bjorn Andersson [Mon, 2 May 2022 16:45:03 +0000 (09:45 -0700)]
thermal/drivers/qcom/lmh: Add sc8180x compatible
The LMh instances in the Qualcomm SC8180X platform looks to behave
similar to those in SM8150, add additional compatibles to allow
platform specific behavior to be added if needed.
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022),
the bit 31 of TSU OTP Calibration Register(OTPTSUTRIM) indicates
whether bit [11:0] of OTPTSUTRIM is valid or invalid.
This patch updates the code to reflect this change.
Document RZ/G2UL TSU bindings. The TSU block on RZ/G2UL is identical to one
found on RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-tsu" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501081930.23743-1-biju.das.jz@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
thermal: thermal_of: fix typo on __thermal_bind_params
Add a missing s to __thermal_bind_param kernel doc comment.
This fixes the following sparse warnings:
drivers/thermal/thermal_of.c:50: warning: expecting prototype for struct __thermal_bind_param. Prototype was for struct __thermal_bind_params instead
Daniel Lezcano [Wed, 20 Apr 2022 16:09:32 +0000 (18:09 +0200)]
tools/thermal: Add thermal daemon skeleton
This change provides a simple daemon skeleton. It is an example of how
to use the thermal library which wraps all the complex code related to
the netlink and transforms it into a callback oriented code.
The goal of this skeleton is to give a base brick for anyone
interested in writing its own thermal engine or as an example to rely
on to write its own thermal monitoring implementation.
In the future, it will evolve with more features and hopefully more
logic.
Daniel Lezcano [Wed, 20 Apr 2022 16:09:31 +0000 (18:09 +0200)]
tools/thermal: Add a temperature capture tool
The 'thermometer' tool allows to capture the temperature of a set of
thermal zones defined in a configuration file at a specified rate.
It is designed to have the lowest possible overhead. It will write the
captured temperature per thermal zone per file so making easier to
write a gnuplot script.
Daniel Lezcano [Wed, 20 Apr 2022 16:09:29 +0000 (18:09 +0200)]
tools/lib/thermal: Add a thermal library
The thermal framework implements a netlink notification mechanism to
be used by the userspace to have a thermal configuration discovery,
trip point changes or violation, cooling device changes notifications,
etc...
This library provides a level of abstraction for the thermal netlink
notification allowing the userspace to connect to the notification
mechanism more easily. The library is callback oriented.
Stefan Wahren [Tue, 12 Apr 2022 19:54:23 +0000 (21:54 +0200)]
thermal/drivers/bcm2711: Don't clamp temperature at zero
The thermal sensor on BCM2711 is capable of negative temperatures, so don't
clamp the measurements at zero. Since this was the only use for variable t,
drop it.
This change based on a patch by Dom Cobley, who also tested the fix.
thermal/drivers/tsens: Add compat string for the qcom,msm8960
On apq8064 (msm8960) platforms the tsens device is created manually by
the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens
device instantiated from the device tree.
thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTM
Add support for PMIC5 Gen2 ADC_TM, used on PMIC7 chips. It is a
close counterpart of PMIC7 ADC and has the same functionality as
PMIC5 ADC_TM, for threshold monitoring and interrupt generation.
It is present on PMK8350 alone, like PMIC7 ADC and can be used
to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
having ADC on a target, through PBS(Programmable Boot Sequence).
thermal/drivers/qcom: Add support for multiple generations of devices
Refactor code to support multiple generations of ADC_TM devices
by defining gen number, irq name and disable, configure, isr and
init APIs in the individual data structs.
Add documentation for PMIC5 Gen2 ADC_TM peripheral.
It is used for monitoring ADC channel thresholds for PMIC7-type
PMICs. It is present on PMK8350, like PMIC7 ADC and can be used
to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
on a target, through PBS(Programmable Boot Sequence).
Lad Prabhakar [Mon, 10 Jan 2022 14:40:39 +0000 (14:40 +0000)]
thermal/drivers/rcar_thermal: Use platform_get_irq_optional() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
Document RZ/V2L TSU bindings. The TSU block on RZ/V2L is identical to one
found on RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-tsu" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220308212315.4551-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Miaoqian Lin [Sun, 3 Apr 2022 05:49:12 +0000 (05:49 +0000)]
rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.
clk_disable_unprepare calls clk_disable() and clk_unprepare().
They will use IS_ERR_OR_NULL to check the argument.
Borislav Petkov [Wed, 18 May 2022 11:33:15 +0000 (14:33 +0300)]
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
Fix:
In file included from <command-line>:0:0:
drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
and other build errors due to shift overflowing values.
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Andi Shyti [Tue, 10 May 2022 14:04:47 +0000 (16:04 +0200)]
drm/i915/gt: Fix use of static in macro mismatch
The INTEL_GT_RPS_SYSFS_ATTR was creating to different structures
but. When called with the "static" keyword this is affecting only
the first structure, while the second is created as non static.
Move the static keyword inside the macros to affect both the
structures.
drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap
When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.
Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.
Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.") Cc: Matthew Auld <matthew.auld@intel.com> Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806 Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Yang Yingliang [Fri, 13 May 2022 10:05:41 +0000 (18:05 +0800)]
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will
leads some resource leaked, so adjust the sequence to handle the error
correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers()
need be called.
In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
Miaoqian Lin [Thu, 12 May 2022 11:59:08 +0000 (15:59 +0400)]
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
of_parse_phandle() returns a node pointer with refcount incremented, we should
use of_node_put() on it when not need anymore. Add missing of_node_put() to
avoid refcount leak.
Fixes: d10715be03bd ("video: ARM CLCD: Add DT support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
drm/i915: Fix CFI violation with show_dynamic_id()
When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
callback to kobj_attr_show(). kobj_attr_show() uses container_of() to
get the ->show() callback from the attribute it was passed, meaning the
->show() callback needs to be the same type as the ->show() callback in
'struct kobj_attribute'.
However, show_dynamic_id() has the type of the ->show() callback in
'struct device_attribute', which causes a CFI violation when opening the
'id' sysfs node under drm/card0/metrics. This happens to work because
the layout of 'struct kobj_attribute' and 'struct device_attribute' are
the same, so the container_of() cast happens to allow the ->show()
callback to still work.
Change the type of show_dynamic_id() to match the ->show() callback in
'struct kobj_attributes' and update the type of sysfs_metric_id to
match, which resolves the CFI violation.
Imre Deak [Tue, 10 May 2022 11:49:57 +0000 (14:49 +0300)]
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
Fix the following sparse warnings:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
This patch fixes a bug where GEN1 VMs doesn't allow resolutions greater
than 64 MB size (eg 7680x4320). Unnecessary PCI check limits Gen1 VRAM
to legacy PCI BAR size only (ie 64MB). Thus any, resolution requesting
greater then 64MB (eg 7680x4320) would fail. MMIO region assigning this
memory shouldn't be limited by PCI bar size.
Lai Jiangshan [Tue, 12 Apr 2022 12:49:08 +0000 (20:49 +0800)]
x86/sev: Mark the code returning to user space as syscall gap
When returning to user space, %rsp is user-controlled value.
If it is a SNP-guest and the hypervisor decides to mess with the
code-page for this path while a CPU is executing it, a potential #VC
could hit in the syscall return path and mislead the #VC handler.
So make ip_within_syscall_gap() return true in this case.
Sunil V L [Thu, 19 May 2022 05:15:12 +0000 (10:45 +0530)]
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
Add support for getting the boot hart ID from the Linux EFI stub using
RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT
based approach since it works irrespective of DT or ACPI.
The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefi
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220519051512.136724-2-sunilvl@ventanamicro.com
[ardb: minor tweaks for coding style and whitespace] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Borislav Petkov [Wed, 18 May 2022 11:33:15 +0000 (14:33 +0300)]
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
Fix:
In file included from <command-line>:0:0:
drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
and other build errors due to shift overflowing values.
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
v2 by Jani:
- Drop the i915_reg.h changes
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-2-jani.nikula@intel.com
The IBM Everest and Rainier systems have a GPIO line that goes to the
power supplies. It has a dual function: 1) Fans Full Speed, and 2) Sync
input history.
Andrew Lunn [Wed, 18 May 2022 00:58:40 +0000 (02:58 +0200)]
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:
br1
/ \
/ \
/ \
br0.11 wlan0
|
br0
/ | \
p1 p2 p3
br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.
A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.
When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().
Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Carl Yin(殷张成) [Thu, 19 May 2022 02:34:43 +0000 (02:34 +0000)]
USB: serial: option: add Quectel BG95 modem
The BG95 modem has 3 USB configurations that are configurable via the AT
command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem
enumerate with the following interfaces, respectively:
Jonathan Lemon [Tue, 17 May 2022 21:46:00 +0000 (14:46 -0700)]
ptp: ocp: change sysfs attr group handling
In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered. However, if the group was
never previously registered, then this causes a splat.
Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.
Update the error handling appropriately.
Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating") Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Ren [Mon, 9 May 2022 17:56:15 +0000 (19:56 +0200)]
ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC
controller to ensure the clock frequency is calculated correctly.
Suggested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-11-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
All these controllers support at least Dual SPI. Update the DTs.
Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-10-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
This is compatible with the current driver and addresses issues when
running 'make dt_binding_check'.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-2-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
Howard Chiu [Fri, 1 Apr 2022 06:59:06 +0000 (06:59 +0000)]
ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1
Since mac0/1 and mac2/3 are physically located on different die,
they have different properties by nature, which is mac0/1 has smaller delay step.
The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid'
which enables the RX interface delay from the PHY chip.
Refer page 45 of SDK User Guide v08.00
https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf
Saeed Mahameed [Wed, 18 May 2022 06:58:20 +0000 (23:58 -0700)]
sfc: siena: Have a unique wrapper ifndef for efx channels header
Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same
wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be
EFX_SIENA_CHANNELS_H to avoid build system confusion.
This fixes the following build break:
drivers/net/ethernet/sfc/ptp.c:2191:28:
error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’?
2191 | .copy = efx_copy_channel,
Fixes: 6e173d3b4af9 ("sfc: Copy shared files needed for Siena (part 1)") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
octeon_ep: Fix irq releasing in the error handling path of octep_request_irqs()
When taken, the error handling path does not undo correctly what has
already been allocated.
Introduce a new loop index, 'j', in order to simplify the error handling
path and rewrite part of it.
It is now written with the same logic and intermediate variables used
when resources are allocated. This is much more straightforward.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 19 May 2022 02:58:36 +0000 (19:58 -0700)]
Merge branch 'adin-add-support-for-clock-output'
Josua Mayer says:
====================
adin: add support for clock output
This patch series adds support for configuring the two clock outputs of adin
1200 and 1300 PHYs. Certain network controllers require an external reference
clock which can be provided by the PHY.
One of the replies to v1 was asking why the common clock framework isn't used.
Currently no PHY driver has implemented providing a clock to the network
controller. Instead they rely on vendor extensions to make the appropriate
configuration. For example ar8035 uses qca,clk-out-frequency - this patchset
aimed to replicate the same functionality.
Finally the 125MHz free-running clock is enabled in the device-tree for
SolidRun i.MX6 SoMs, to support revisions 1.9 and later, where the original phy
has been replaced with an adin 1300.
To avoid introducing new warning messages during boot for SoMs before rev 1.9,
the status field of the new phy node is disabled by default, and will be
enabled by U-Boot on demand.
====================
Josua Mayer [Tue, 17 May 2022 08:54:31 +0000 (11:54 +0300)]
ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300,
add an entry for it next to the original.
As Russell King pointed out, additional phy nodes cause warnings like:
mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing
To avoid this the new node has its status set to disabled. U-Boot will
be modified to enable the appropriate phy node after probing.
The existing ar8035 nodes have to stay enabled by default to avoid
breaking existing systems when they update Linux only.
Josua Mayer [Tue, 17 May 2022 08:54:30 +0000 (11:54 +0300)]
net: phy: adin: add support for clock output
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add support for selecting the clock via device-tree properties.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. SyncE should be configured dynamically at
runtime, however Linux does not currently have a toggle for this,
so support is explicitly omitted.
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add DT properties to configure both pins.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. However SyncE should be configured dynamically at
runtime, so it is explicitly omitted in this binding.
Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Reduce number of hardware offload retries from flowtable datapath
which might hog system with retries, from Felix Fietkau.
2) Skip neighbour lookup for PPPoE device, fill_forward_path() already
provides this and set on destination address from fill_forward_path for
PPPoE device, also from Felix.
4) When combining PPPoE on top of a VLAN device, set info->outdev to the
PPPoE device so software offload works, from Felix.
5) Fix TCP teardown flowtable state, races with conntrack gc might result
in resetting the state to ESTABLISHED and the time to one day. Joint
work with Oz Shlomo and Sven Auhagen.
6) Call dst_check() from flowtable datapath to check if dst is stale
instead of doing it from garbage collector path.
7) Disable register tracking infrastructure, either user-space or
kernel need to pre-fetch keys inconditionally, otherwise register
tracking assumes data is already available in register that might
not well be there, leading to incorrect reductions.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
netfilter: nft_flow_offload: fix offload with pppoe + vlan
net: fix dev_fill_forward_path with pppoe + bridge
netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices
netfilter: flowtable: fix excessive hw offload attempts after failure
====================
Abhinav Kumar [Wed, 18 May 2022 22:34:07 +0000 (15:34 -0700)]
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
If there are errors while trying to enable the pm in the
bind path, it will lead to unclocked access of hw revision
register thereby crashing the device.
This will not address why the pm_runtime_get_sync() fails
but at the very least we should be able to prevent the
crash by handling the error and bailing out earlier.
changes in v2:
- use pm_runtime_resume_and_get() instead of
pm_runtime_get_sync()
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486721/ Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Chun-Jie Chen [Fri, 13 May 2022 07:36:21 +0000 (15:36 +0800)]
clk: mediatek: use en_mask as a pure div_en_mask
We no longer allow en_mask to be a combination of
pll_en_bit and div_en_mask, so remove pll_en_bit(bit0)
from en_mask to make en_mask a pure en_mask that only
used for pll dividers.
This commit continues the work done in commit 7cc4e1bbe300
("clk: mediatek: Fix asymmetrical PLL enable and disable
control") and commit f384c44754b7 ("clk: mediatek:
Add configurable enable control to mtk_pll_data") to
clean up en_mask(bit0) default setting.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Link: https://lore.kernel.org/r/20220513073621.12923-1-mandyjh.liu@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs
The TCU clock gate on X1000 wasn't requested by the driver and could
be gated automatically later on in boot, which prevents timers from
running and breaks PWM.
Add a workaround to support old device trees that don't specify the
"tcu" clock gate. In this case the kernel will print a warning and
attempt to continue without the clock, which is wrong, but it could
work if "clk_ignore_unused" is in the kernel arguments.
Linus Torvalds [Thu, 19 May 2022 00:21:30 +0000 (14:21 -1000)]
Merge tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small changes fixing issues from the 5.18 merge window:
- Fix wrong ordering of a tracepoint (Dylan)
- Fix MSG_RING on IOPOLL rings (me)"
* tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
io_uring: don't attempt to IOPOLL for MSG_RING requests
io_uring: fix ordering of args in io_uring_queue_async_work
Linus Torvalds [Thu, 19 May 2022 00:19:26 +0000 (14:19 -1000)]
Merge tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where a task's audit_context was
not being properly reset with io_uring"
* tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts
Linus Torvalds [Thu, 19 May 2022 00:07:43 +0000 (14:07 -1000)]
Merge branch 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
Linus Torvalds [Thu, 19 May 2022 00:02:25 +0000 (14:02 -1000)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"vhost race fix and a percpu_ref_init-caused cgroup double-free fix.
The latter had manifested as buggered struct mount refcounting - those
are also using percpu data structures, but anything that does percpu
allocations could be hit"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix double fget() in vhost_net_set_backend()
percpu_ref_init(): clean ->percpu_count_ref on failure
David Gow [Fri, 13 May 2022 08:51:08 +0000 (16:51 +0800)]
kunit: tool: Use qemu-system-i386 for i386 runs
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.
Signed-off-by: David Gow <davidgow@google.com> Tested-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
drm/msm: don't free the IRQ if it was not requested
As msm_drm_uninit() is called from the msm_drm_init() error path,
additional care should be necessary as not to call the free_irq() for
the IRQ that was not requested before (because an error occured earlier
than the request_irq() call).
This fixed the issue reported with the following backtrace:
The bug is due to fuzzed inode has both inline_data and encrypted flags.
During f2fs_evict_inode(), as the inode was deleted by rename(), it
will cause inline data conversion due to conflicting flags. The page
cache will be polluted and the panic will be triggered in clear_inode().
Try fixing the bug by doing more sanity checks for inline data inode in
sanity_check_inode().
Cc: stable@vger.kernel.org Reported-by: Ming Yan <yanming@tju.edu.cn> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Tue, 17 May 2022 03:37:23 +0000 (11:37 +0800)]
f2fs: fix fallocate to use file_modified to update permissions consistently
This patch tries to fix permission consistency issue as all other
mainline filesystems.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Cc: stable@kernel.org Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A previous commit got rid of unnecessary rcu_read_lock() inside the
IRQ disabling queue_lock, but this debug statement was left. It's now
firing since we are indeed not inside a RCU read lock, but we don't
need to be as we're still preempt safe.
Get rid of the check, as we have a lockdep assert for holding the
queue lock right after it anyway.
Jens Axboe [Wed, 18 May 2022 21:34:37 +0000 (15:34 -0600)]
io_uring: disallow mixed provided buffer group registrations
It's nonsensical to register a provided buffer ring, if a classic
provided buffer group with the same ID exists. Depending on the order of
which we decide what type to pick, the other type will never get used.
Explicitly disallow it and return an error if this is attempted.
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 18 May 2022 20:36:18 +0000 (14:36 -0600)]
io_uring: initialize io_buffer_list head when shared ring is unregistered
We use ->buf_pages != 0 to tell if this is a shared buffer ring or a
classic provided buffer group. If we unregister the shared ring and
then attempt to use it, buf_pages is zero yet the classic list head
isn't properly initialized. This causes io_buffer_select() to think
that we have classic buffers available, but then we crash when we try
and get one from the list.
Just initialize the list if we unregister a shared buffer ring, leaving
it in a sane state for either re-registration or for attempting to use
it. And do the same for the initial setup from the classic path.
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers") Signed-off-by: Jens Axboe <axboe@kernel.dk>
projects / people / ms / linux.git / log
