Sebastian Fricke [Sat, 26 Mar 2022 18:37:15 +0000 (19:37 +0100)]
media: staging: media: hantro: Update TODO list
VP8 has been added to the uABI by commit 363240ce1c08
("media: uapi: move VP8 stateless controls out of staging")
VP9 has been added to the uABI by commit b88dbe38dca8
("media: uapi: Add VP9 stateless decoder controls")
H264 has been added to the uABI by commit 46a309d27517
("media: uapi: move H264 stateless controls out of staging")
The last remaining codec to be added to the uABI is HEVC.
Highlight these changes in the TODO list.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Ming Qian [Wed, 23 Mar 2022 09:05:58 +0000 (10:05 +0100)]
media: imx-jpeg: Support dynamic resolution change
To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Ming Qian [Wed, 23 Mar 2022 09:05:55 +0000 (10:05 +0100)]
media: imx-jpeg: Identify and handle precision correctly
The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.
The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.
[hverkuil: document the new precision field]
Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tom Rix [Sat, 19 Mar 2022 14:34:56 +0000 (15:34 +0100)]
media: platform: return early if the iface is not handled
Clang static analysis reports this issue
ispcsiphy.c:63:14: warning: The left operand of '<<'
is a garbage value
reg |= mode << shift;
~~~~ ^
The iface switch-statement default case falls through
to ISP_INTERFACE_CCP2B_PHY1. Which is later checked
to set the mode. Since the default case is left out
of this check mode is never set. Instead of falling
through and assuming a ISP_INTERFACE_CCP2B_PHY1
iface, return.
Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Wed, 16 Mar 2022 21:09:16 +0000 (22:09 +0100)]
media: i2c: rdacm20: Fix format definition
The RDACM20 camera supports a single image format which is currently
listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on
the GMSL serial bus, the 2X8 variant does not apply.
Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16.
This fixes a runtime error which is now triggered as the MAX9286
deserializer implements .link_validate().
Niklas Söderlund [Wed, 16 Mar 2022 14:48:39 +0000 (15:48 +0100)]
media: rcar-vin: Add check that input interface and format are valid
Add a check to make sure the input interface (CSI-2 or parallel) allow
for the requested input bus format. If not inform the user and error out
rather then try to continue with incorrect settings.
While at it add the missing define for RGB666 that is not yet supported
in the driver but we can preemptively check for it in this context
already.
Lukas Bulwahn [Wed, 16 Mar 2022 07:25:17 +0000 (08:25 +0100)]
media: MAINTAINERS: adjust entries to nxp driver movement in media platform
Commit 46fb99951fe2 ("media: platform: place NXP drivers on a separate dir")
moves various files in media/platform into a nxp subdirectory. It adjusts
the section MEDIA DRIVER FOR FREESCALE IMX PXP in MAINTAINERS, but misses
some references in NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS
FOR FREESCALE IMX7.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Adjust the file references in the NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and
MEDIA DRIVERS FOR FREESCALE IMX7 sections.
Laurent Pinchart [Tue, 15 Mar 2022 10:22:45 +0000 (11:22 +0100)]
media: v4l2: mem2mem: Fix typos in v4l2_m2m_dev documentation
The v4l2_m2m_dev structure documentation incorrectly references the
v4l2_m2m_unregister_media_controller() function when it actually means
v4l2_m2m_register_media_controller(). Fix it.
Tom Rix [Sat, 12 Mar 2022 15:48:45 +0000 (16:48 +0100)]
media: cec: seco: remove byte handling from smb_word_op
smb_word_op() has a parameter data_format that
determines if the data is either a byte or
word. From inspection, smb_word_op() is only
used by the macros smb_wr16() and smb_rd16()
both pass in CMD_WORD_DATA. There is no use of
smb_word_op() that passes in CMD_BYTE_DATA.
So remove the byte handling.
Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lukas Bulwahn [Tue, 8 Mar 2022 11:43:00 +0000 (12:43 +0100)]
media: MAINTAINERS: drop unreachable contact for MEDIATEK JPEG DRIVER
After sending a patch to Rick Chang, the mediatek mail server responded:
** Message not delivered **
Your message couldn't be delivered to rick.chang@mediatek.com because
the remote server is misconfigured. See technical details below for more
information.
The response from the remote server was:
550 Relaying mail to rick.chang@mediatek.com is not allowed
So, drop Rick Chang from the MEDIATEK JPEG DRIVER section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lukas Bulwahn [Tue, 8 Mar 2022 11:26:30 +0000 (12:26 +0100)]
media: MAINTAINERS: rectify entry for MEDIATEK MEDIA DRIVER
Commit 9cdd70ceb6fa ("media: dt-bindings: media: mtk-vcodec: Separate video
encoder and decoder dt-bindings") converts and splits mediatek-vcodec.txt
to mediatek,vcodec-{de,en}coder.yaml, but missed to adjust its reference
in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in MEDIATEK MEDIA DRIVER.
Commit a16ce2f33732 ("media: dt-bindings: mediatek: convert mtk jpeg
decoder/encoder to yaml") converts mediatek-jpeg-decoder.txt to yaml, but
missed to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
While touching this section, generalize the file entry to also cover the
encoder yaml devicetree, as the driver directory also includes the encoder.
Colin Ian King [Mon, 7 Mar 2022 22:42:47 +0000 (23:42 +0100)]
media: gspca: make the read-only array table static const
Don't populate the read-only array table on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lukas Bulwahn [Mon, 7 Mar 2022 14:59:35 +0000 (15:59 +0100)]
media: MAINTAINERS: rectify entry for MEDIA DRIVERS FOR NVIDIA TEGRA - VDE
Commit ccc3016261ed ("media: dt: bindings: tegra-vde: Convert to schema")
converts nvidia,tegra-vde.txt to nvidia,tegra-vde.yaml, but missed to
adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in MEDIA DRIVERS FOR NVIDIA TEGRA - VDE.
Miaoqian Lin [Mon, 7 Mar 2022 08:16:37 +0000 (09:16 +0100)]
media: atmel: atmel-isc: Fix PM disable depth imbalance in atmel_isc_probe
The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 0a0e265515db ("media: atmel: atmel-isc: split driver into driver base and isc") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Arnd Bergmann [Fri, 13 May 2022 08:59:50 +0000 (10:59 +0200)]
Merge branch 'asm-generic-headers-cleanup' into asm-generic
A series from Masahiro Yamada to clean up the uapi headers, making
sure they can actually be included from user space without additional
dependencies on either kernel headers or specific libc versions.
* asm-generic-headers-cleanup:
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
sparc: add asm/stat.h to UAPI compile-test coverage
asm/stat.h is currently excluded from the UAPI compile-test for
ARCH=sparc because of the errors like follows:
In file included from <command-line>:
./usr/include/asm/stat.h:11:2: error: unknown type name 'ino_t'
11 | ino_t st_ino;
| ^~~~~
HDRTEST usr/include/asm/param.h
./usr/include/asm/stat.h:12:2: error: unknown type name 'mode_t'
12 | mode_t st_mode;
| ^~~~~~
./usr/include/asm/stat.h:14:2: error: unknown type name 'uid_t'
14 | uid_t st_uid;
| ^~~~~
./usr/include/asm/stat.h:15:2: error: unknown type name 'gid_t'
15 | gid_t st_gid;
| ^~~~~
The errors can be fixed by prefixing the types with __kernel_.
Then, remove the no-header-test entry from user/include/Makefile.
powerpc: add asm/stat.h to UAPI compile-test coverage
asm/stat.h is currently excluded from the UAPI compile-test for
ARCH=powerpc because of the errors like follows:
HDRTEST usr/include/asm/stat.h
In file included from <command-line>:32:
./usr/include/asm/stat.h:32:2: error: unknown type name 'ino_t'
32 | ino_t st_ino;
| ^~~~~
./usr/include/asm/stat.h:35:2: error: unknown type name 'mode_t'
35 | mode_t st_mode;
| ^~~~~~
./usr/include/asm/stat.h:40:2: error: unknown type name 'uid_t'
40 | uid_t st_uid;
| ^~~~~
./usr/include/asm/stat.h:41:2: error: unknown type name 'gid_t'
41 | gid_t st_gid;
| ^~~~~
The errors can be fixed by prefixing the types with __kernel_.
Then, remove the no-header-test entry from user/include/Makefile.
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
Some UAPI headers included <stdlib.h>, like this:
#ifndef __KERNEL__
#include <stdlib.h>
#endif
As it turned out, they just included it for no good reason.
After some fixes, now I can compile-test UAPI headers
(CONFIG_UAPI_HEADER_TEST=y) without including <stdlib.h> from the
system header search paths.
To avoid somebody getting it back again, this commit adds the dummy
header, usr/dummy-include/stdlib.h
I added $(srctree)/usr/dummy-include to the header search paths.
Because it is searched before the system directories, if someone
tries to include <stdlib.h>, they will see the error message.
While I am here, I also replaced $(objtree)/usr/include with $(obj),
but it has no functional change.
If we can make kernel headers self-contained (that is, none of exported
kernel headers includes system headers), we will be able to add the
-nostdinc flag, but that is much far from where we stand now.
As a realistic solution, we can ban header inclusion individually by
putting a dummy header into usr/dummy-include/.
Currently, no header include <stdbool.h>. I put it as well before somebody
attempts to use it.
agpgart.h: do not include <stdlib.h> from exported header
Commit 35d0f1d54ecd ("include/uapi/linux/agpgart.h: include stdlib.h in
userspace") included <stdlib.h> to fix the unknown size_t error, but
I do not think it is the right fix.
This header already uses __kernel_size_t a few lines below.
Replace the remaining size_t, and stop including <stdlib.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
bumwoo lee [Wed, 27 Apr 2022 03:00:05 +0000 (12:00 +0900)]
extcon: Modify extcon device to be created after driver data is set
Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.
While SM5502 and SM5504 are purely micro USB switching
circuits, SM5703 is a multi-function device which has multiple
modules in it. Change the i2c_device_id of it to avoid conflict
with MFD driver.
Li Jun [Tue, 19 Apr 2022 12:44:09 +0000 (20:44 +0800)]
extcon: ptn5150: Add usb role class support
Some usb controller drivers may not support extcon but use
usb role class as it's the preferred approach, so to support
usb dual role switch with usb role class, add usb role class
consumer support.
Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Li Jun [Tue, 19 Apr 2022 12:44:08 +0000 (20:44 +0800)]
extcon: ptn5150: Add queue work sync before driver release
Add device managed action to sync pending queue work, otherwise
the queued work may run after the work is destroyed.
Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Markuss Broks [Sat, 12 Mar 2022 18:41:54 +0000 (20:41 +0200)]
extcon: sm5502: Add support for SM5703
SM5703 is another MFD from Silicon Mitus which has a very similar MUIC
unit to the one in SM5502. The only difference I've noticed is slightly different
configuration only enables the interrupts which are exactly the same as on SM5502.
If we make use of different interrupts in the future, this can be improved by having
a separate struct for SM5703, but the main functionality (detecting cable or OTG adapter)
is working properly.
Bruce Chen [Thu, 3 Mar 2022 07:36:03 +0000 (15:36 +0800)]
extcon: usb-gpio: Remove disable irq operation in system sleep
If disable vbus/id irq, it will lead to wakeup system fail
in unisoc platform. In unisoc platform, Irq enable and irq
wakeup are the same interrupt line. So remove disable vbus/id
irq operation is a way to solve the issue.
Signed-off-by: Bruce Chen <bruce.chen@unisoc.com> Acked-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Yang Li [Tue, 4 Jan 2022 08:43:59 +0000 (16:43 +0800)]
extcon: Fix some kernel-doc comments
Add the description of @id in extcon_sync() kernel-doc comment
and @edev, @id, @prop in extcon_set_property_sync() kernel-doc
comment to remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
drivers/extcon/extcon.c:409: warning: Function parameter or
member 'id' not described in 'extcon_sync'
drivers/extcon/extcon.c:750: warning: Function parameter or
member 'edev' not described in 'extcon_set_property_sync'
drivers/extcon/extcon.c:750: warning: Function parameter or
member 'id' not described in 'extcon_set_property_sync'
drivers/extcon/extcon.c:750: warning: Function parameter or
member 'prop' not described in 'extcon_set_property_sync'
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Hans de Goede [Tue, 28 Dec 2021 17:01:41 +0000 (18:01 +0100)]
extcon: int3496: Add support for controlling Vbus through a regulator
On some boards the 5V vboost-regulator for powering devices connected to
the micro USB connector is not controlled through a GPIO. This happens
for example when the 5V vboost-regulator is integrated into the charger IC
and controlled over I2C.
Add support for controlling the 5V vboost-regulator through the regulator
framework for such boards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Hans de Goede [Tue, 28 Dec 2021 17:01:40 +0000 (18:01 +0100)]
extcon: int3496: Add support for binding to plain platform devices
On some X86 Android tablets the DSTD lack the INT3496 ACPI device,
while also not handling micro USB port ID pin events inside the DSDT
(instead the forked factory image kernel has things hardcoded).
The new drivers/platform/x86/x86-android-tablets.c module manually
instantiates an intel-int3496 device for these tablets.
Add support to the extcon-intel-int3496 driver to bind to devices
without an ACPI companion and export a normal platform_device
modalias for automatic module loading.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Hans de Goede [Tue, 28 Dec 2021 17:01:39 +0000 (18:01 +0100)]
extcon: int3496: Request non-exclusive access to the ID GPIO
Some DSDTs are buggy and do a read from the ID pin during the ACPI
initialization, causing the pin to be marked as owned by:
"ACPI:OpRegion" and causing gpiod_get() to fail with -EBUSY.
Pass the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag to the gpiod_get() call
to work around this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The extcon_get_extcon_dev() function returns error pointers on error,
NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV)
when the CONFIG_EXTCON option is disabled. This is very complicated for
the callers to handle and a number of them had bugs that would lead to
an Oops.
In real life, there are two things which prevented crashes. First,
error pointers would only be returned if there was bug in the caller
where they passed a NULL "extcon_name" and none of them do that.
Second, only two out of the eight drivers will build when CONFIG_EXTCON
is disabled.
The normal way to write this would be to return -EPROBE_DEFER directly
when appropriate and return NULL when CONFIG_EXTCON is disabled. Then
the error handling is simple and just looks like:
dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev));
if (IS_ERR(dev->edev))
return PTR_ERR(dev->edev);
For the two drivers which can build with CONFIG_EXTCON disabled, then
extcon_get_extcon_dev() will now return NULL which is not treated as an
error and the probe will continue successfully. Those two drivers are
"typec_fusb302" and "max8997-battery". In the original code, the
typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but
now that function is a no-op. For the max8997-battery driver everything
should continue working as is.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Deren Wu [Wed, 11 May 2022 23:06:36 +0000 (07:06 +0800)]
mt76: mt7921: add ipv6 NS offload support
Add ipv6 NS offload for WoWLAN state.
Tested in this way:
1. Put device-A into WoW state.
2. ping6 from device-B to device-A.
3. In sniffer, see Neighbour advertisement from device-A.
Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 6 Jan 2022 12:22:28 +0000 (13:22 +0100)]
mt76: add support for overriding the device used for DMA mapping
WED support requires using non-coherent DMA, whereas the PCI device might
be configured for coherent DMA.
The WED driver will take care of changing the PCI HIF coherent IO setting
on attach.
Ryder Lee [Thu, 5 May 2022 07:08:35 +0000 (15:08 +0800)]
mt76: mt7915: introduce mt7915_mac_severe_check()
In rare cases, TRB pointers might be out of sync leads to RMAC stopping
Rx that requires minimal recovery, so add this helper to periodically
check TRB status.
Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Peter Chiu [Thu, 5 May 2022 08:25:54 +0000 (16:25 +0800)]
mt76: mt7915: limit minimum twt duration
The minimum twt duration supported by mt7915 is 64 according to hardware
design. Reply station with TWT_SETUP_CMD_DICTATE if min_twt_dur smaller
than 64.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Fri, 29 Apr 2022 11:55:56 +0000 (13:55 +0200)]
mt76: mt7915: configure soc clocks in mt7986_wmac_init
Configure mt7986 wmac soc clocks in mt7986_wmac_init routine.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 23 Apr 2022 05:01:18 +0000 (07:01 +0200)]
mt76: fix tx status related use-after-free race on station removal
There is a small race window where ongoing tx activity can lead to a skb
getting added to the status tracking idr after that idr has already been
cleaned up, which will keep the wcid linked in the status poll list.
Fix this by only adding status skbs if the wcid pointer is still assigned
in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove
Fixes: bd1e3e7b693c ("mt76: introduce packet_id idr") Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 20 Apr 2022 12:29:00 +0000 (14:29 +0200)]
mt76: fix encap offload ethernet type check
The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead
Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bo Jiao [Wed, 20 Apr 2022 07:11:44 +0000 (15:11 +0800)]
mt76: mt7915: disable RX_HDR_TRANS_SHORT
This patch disables RX_TRANS_SHORT to make MDP to do header translation
when payload less than 8 bytes, hence the (QoS) null data can be encapsulated
to 802.3 format. However, WDS requires (QoS) null data in 802.11 format
to created vlan AP interfaces.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: lian.chen <lian.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76: mt7915: add debugfs knob for RF registers read/write
Add RF registers read/write support for debugging RF issues, which
should be processed by mcu commands.
The index of rf registers use the generic regidx, and are combined
with two parts: WF selection [31:28] and offset [27:0].
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sean Wang [Thu, 14 Apr 2022 22:56:05 +0000 (06:56 +0800)]
mt76: mt7921: fix kernel crash at mt7921_pci_remove
The crash log shown it is possible that mt7921_irq_handler is called while
devm_free_irq is being handled so mt76_free_device need to be postponed
until devm_free_irq is completed to solve the crash we free the mt76 device
too early.
Colin Ian King [Thu, 14 Apr 2022 09:54:38 +0000 (10:54 +0100)]
mt76: mt7921: make read-only array ppet16_ppet8_ru3_ru0 static const
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but
instead make it static const. Also makes the object code a little smaller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Colin Ian King [Thu, 14 Apr 2022 09:50:07 +0000 (10:50 +0100)]
mt76: mt7915: make read-only array ppet16_ppet8_ru3_ru0 static const
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but
instead make it static const. Also makes the object code a little smaller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 20 Apr 2022 10:27:18 +0000 (12:27 +0200)]
mt76: fix rx reordering with non explicit / psmp ack policy
When the QoS ack policy was set to non explicit / psmp ack, frames are treated
as not being part of a BA session, which causes extra latency on reordering.
Fix this by only bypassing reordering for packets with no-ack policy
Sean Wang [Wed, 6 Apr 2022 18:29:14 +0000 (02:29 +0800)]
mt76: mt7921: Add AP mode support
add AP mode support to mt7921 that can work for mt7921[e,s,u]
with the common code.
Tested-by: Deren Wu <deren.wu@mediatek.com> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76: mt7915: use 0xff to initialize bitrate_mask in mt7915_init_bitrate_mask
Use 0xff (GENMASK(7,0)) in mt7915_init_bitrate_mask routine in order to
initialize bitrate_mask structure in order to avoid truncating value in
memset().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76: mt7915: fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector
Fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector
routine if the chip does not support dbdc and the hw reports band_idx
set to 1.
Fixes: 78fc30a21cf11 ("mt76: mt7915: move testmode data from dev to phy") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76: mt7915: fix possible uninitialized pointer dereference in mt7986_wmac_gpio_setup
Add default case for type switch in mt7986_wmac_gpio_setup routine in
order to avoid a possible uninitialized pointer dereference.
Fixes: 99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76: mt7921: Fix the error handling path of mt7921_pci_probe()
In case of error, some resources must be freed, as already done above and
below the devm_kmemdup() and __mt7921e_mcu_drv_pmctrl() calls added in the
commit in Fixes:.
Fixes: 602cc0c9618a ("mt76: mt7921e: fix possible probe failure after reboot") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Lorenzo Bianconi [Thu, 17 Mar 2022 17:08:35 +0000 (18:08 +0100)]
mt76: mt7921: honor pm user configuration in mt7921_sniffer_interface_iter
Honor runtime-pm user configuration in mt7921_sniffer_interface_iter
routine if we do not have a monitor interface.
Fixes: 1f12fa34e5dc5 ("mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR is set") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 25 Mar 2022 21:01:43 +0000 (22:01 +0100)]
mt76: fix use-after-free by removing a non-RCU wcid pointer
Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule
by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and
sta_info_[alloc, free].
[18853.876689] ==================================================================
[18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76]
[18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883
[18853.876786]
[18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215
projects / people / ms / linux.git / log
