Adrian Hunter [Thu, 28 Apr 2022 09:31:09 +0000 (12:31 +0300)]
perf intel-pt: Fix timeless decoding with perf.data directory
Intel PT does not capture data in separate directories, so do not
use separate directory processing because it doesn't work for
timeless decoding. It also looks like it doesn't support one_mmap
handling.
Example:
Before:
# perf record --kcore -a -e intel_pt/tsc=0/k sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.799 MB perf.data ]
# perf script --itrace=bep | head
#
gfs2: No short reads or writes upon glock contention
Commit 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered
I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
allow dropping the inode glock while faulting in user buffers. When the
lock was dropped, a short result was returned to indicate that the
operation was interrupted.
As pointed out by Linus (see the link below), this behavior is broken
and the operations should always re-acquire the inode glock and resume
the operation instead.
Similar to SPR, the C1 and C1E states on ADL are mutually exclusive.
Only one of them can be enabled at a time.
But contrast to SPR, which usually has a strong latency requirement
as a Xeon processor, C1E is preferred on ADL for better energy
efficiency.
Add custom C-state tables for ADL with both C1 and C1E, and
1. Enable the "C1E promotion" bit in MSR_IA32_POWER_CTL and mark C1
with the CPUIDLE_FLAG_UNUSABLE flag, so C1 is not available by
default.
2. Add support for the "preferred_cstates" module parameter, so that
users can choose to use C1 instead of C1E by booting with
"intel_idle.preferred_cstates=2".
Separate custom C-state tables are introduced for the ADL mobile and
desktop processors, because of the exit latency differences between
these two variants, especially with respect to PC10.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Changelog edits, code rearrangement ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Wed, 27 Apr 2022 13:49:18 +0000 (15:49 +0200)]
ASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408
Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.
ASoC: rk3328: fix disabling mclk on pclk probe failure
If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.
Fixes: c32759035ad2 ("ASoC: rockchip: support ACODEC for rk3328") Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
Unfortunately, the name/value choice for the MTE ELF segment type
(PT_ARM_MEMTAG_MTE) was pretty poor: LOPROC+1 is already in use by
PT_AARCH64_UNWIND, as defined in the AArch64 ELF ABI
(https://github.com/ARM-software/abi-aa/blob/main/aaelf64/aaelf64.rst).
Update the ELF segment type value to LOPROC+2 and also change the define
to PT_AARCH64_MEMTAG_MTE to match the AArch64 ELF ABI namespace. The
AArch64 ELF ABI document is updating accordingly (segment type not
previously mentioned in the document).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 761b9b366cec ("elf: Introduce the ARM MTE ELF segment type") Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Machado <luis.machado@arm.com> Cc: Richard Earnshaw <Richard.Earnshaw@arm.com> Link: https://lore.kernel.org/r/20220425151833.2603830-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Xiaoke Wang [Thu, 28 Apr 2022 08:52:39 +0000 (16:52 +0800)]
iommu/msm: Add a check for the return of kzalloc()
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Besides, to propagate the error to the caller, the type of
insert_iommu_master() is changed to `int`. Several instructions related
to it are also updated.
pl330 DMA controller bindings documented 'dma-channels' and
'dma-requests' properties (without leading hash sign), so fix the DTS to
match the bindings.
Fixes: e18183cefc8b ("mfd: Add DT bindings documentation for Samsung Exynos LPASS") Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220427155840.596535-7-krzysztof.kozlowski@linaro.org
Cristian Marussi [Wed, 30 Mar 2022 15:05:32 +0000 (16:05 +0100)]
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
While enumerating protocols implemented by the SCMI platform using
BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is
currently validated in an improper way since the check employs a sum
between unsigned integers that could overflow and cause the check itself
to be silently bypassed if the returned value 'loop_num_ret' is big
enough.
Cristian Marussi [Wed, 30 Mar 2022 15:05:31 +0000 (16:05 +0100)]
firmware: arm_scmi: Make protocols initialisation fail on basic errors
Bail out of protocol initialisation routine early when basic information
about protocol version and attributes could not be retrieved. Failing to
act this way can lead to a successfully initialized SCMI protocol which
is in fact not fully functional.
Colin Ian King [Mon, 18 Apr 2022 14:44:16 +0000 (15:44 +0100)]
PCI: versatile: Remove redundant variable retval
Variable retval is being assigned a value that is never read, the
variable is redundant and can be removed.
Cleans up clang scan build warning:
drivers/pci/controller/pci-versatile.c:37:10: warning: Although the value
stored to 'retval' is used in the enclosing expression, the value is never
actually read from 'retval' [deadcode.DeadStores]
Yang Yingliang [Mon, 25 Apr 2022 09:08:26 +0000 (17:08 +0800)]
iommu/dart: check return value after calling platform_get_resource()
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Eric Dumazet [Wed, 27 Apr 2022 20:41:47 +0000 (13:41 -0700)]
net: make sure net_rx_action() calls skb_defer_free_flush()
I missed a stray return; in net_rx_action(), which very well
is taken whenever trigger_rx_softirq() has been called on
a cpu that is no longer receiving network packets,
or receiving too few of them.
Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220427204147.1310161-1-eric.dumazet@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lu Baolu [Sat, 23 Apr 2022 08:23:30 +0000 (16:23 +0800)]
iommu/vt-d: Drop stop marker messages
The page fault handling framework in the IOMMU core explicitly states
that it doesn't handle PCI PASID Stop Marker and the IOMMU drivers must
discard them before reporting faults. This handles Stop Marker messages
in prq_event_thread() before reporting events to the core.
The VT-d driver explicitly drains the pending page requests when a CPU
page table (represented by a mm struct) is unbound from a PASID according
to the procedures defined in the VT-d spec. The Stop Marker messages do
not need a response. Hence, it is safe to drop the Stop Marker messages
silently if any of them is found in the page request queue.
David Stevens [Sun, 10 Apr 2022 01:35:33 +0000 (09:35 +0800)]
iommu/vt-d: Calculate mask for non-aligned flushes
Calculate the appropriate mask for non-size-aligned page selective
invalidation. Since psi uses the mask value to mask out the lower order
bits of the target address, properly flushing the iotlb requires using a
mask value such that [pfn, pfn+pages) all lie within the flushed
size-aligned region. This is not normally an issue because iova.c
always allocates iovas that are aligned to their size. However, iovas
which come from other sources (e.g. userspace via VFIO) may not be
aligned.
To properly flush the IOTLB, both the start and end pfns need to be
equal after applying the mask. That means that the most efficient mask
to use is the index of the lowest bit that is equal where all higher
bits are also equal. For example, if pfn=0x17f and pages=3, then
end_pfn=0x181, so the smallest mask we can use is 8. Any differences
above the highest bit of pages are due to carrying, so by xnor'ing pfn
and end_pfn and then masking out the lower order bits based on pages, we
get 0xffffff00, where the first set bit is the mask we want to use.
Robin Murphy [Mon, 25 Apr 2022 12:42:04 +0000 (13:42 +0100)]
thunderbolt: Make iommu_dma_protection more accurate
Between me trying to get rid of iommu_present() and Mario wanting to
support the AMD equivalent of DMAR_PLATFORM_OPT_IN, scrutiny has shown
that the iommu_dma_protection attribute is being far too optimistic.
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device(s)
we care about. Furthermore, all that DMAR_PLATFORM_OPT_IN really does
is tell us that memory was protected before the kernel was loaded, and
prevent the user from disabling the intel-iommu driver entirely. While
that lets us assume kernel integrity, what matters for actual runtime
DMA protection is whether we trust individual devices, based on the
"external facing" property that we expect firmware to describe for
Thunderbolt ports.
It's proven challenging to determine the appropriate ports accurately
given the variety of possible topologies, so while still not getting a
perfect answer, by putting enough faith in firmware we can at least get
a good bit closer. If we can see that any device near a Thunderbolt NHI
has all the requisites for Kernel DMA Protection, chances are that it
*is* a relevant port, but moreover that implies that firmware is playing
the game overall, so we'll use that to assume that all Thunderbolt ports
should be correctly marked and thus will end up fully protected.
Robin Murphy [Mon, 25 Apr 2022 12:42:03 +0000 (13:42 +0100)]
iommu: Add capability for pre-boot DMA protection
VT-d's dmar_platform_optin() actually represents a combination of
properties fairly well standardised by Microsoft as "Pre-boot DMA
Protection" and "Kernel DMA Protection"[1]. As such, we can provide
interested consumers with an abstracted capability rather than
driver-specific interfaces that won't scale. We name it for the former
aspect since that's what external callers are most likely to be
interested in; the latter is for the IOMMU layer to handle itself.
Robin Murphy [Mon, 25 Apr 2022 12:42:02 +0000 (13:42 +0100)]
iommu: Introduce device_iommu_capable()
iommu_capable() only really works for systems where all IOMMU instances
are completely homogeneous, and all devices are IOMMU-mapped. Implement
the new variant which will be able to give a more accurate answer for
whichever device the caller is actually interested in, and even more so
once all the external users have been converted and we can reliably pass
the device pointer through the internal driver interface too.
dma-iommu: Check that swiotlb is active before trying to use it
If the IOMMU is in use and an untrusted device is connected to an external
facing port but the address requested isn't page aligned will cause the
kernel to attempt to use bounce buffers.
If for some reason the bounce buffers have not been allocated this is a
problem that should be made apparent to the user.
Previously the AMD IOMMU would only enable SWIOTLB in certain
circumstances:
* IOMMU in passthrough mode
* SME enabled
This logic however doesn't work when an untrusted device is plugged in
that doesn't do page aligned DMA transactions. The expectation is
that a bounce buffer is used for those transactions.
This fails like this:
swiotlb buffer is full (sz: 4096 bytes), total 0 (slots), used 0 (slots)
That happens because the bounce buffers have been allocated, followed by
freed during startup but the bounce buffering code expects that all IOMMUs
have left it enabled.
Remove the criteria to set up bounce buffers on AMD systems to ensure
they're always available for supporting untrusted devices.
Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers") Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220404204723.9767-2-mario.limonciello@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Paolo Abeni [Thu, 28 Apr 2022 08:18:51 +0000 (10:18 +0200)]
Merge tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression causing some HCI events to be discarded when they
shouldn't.
* tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
====================
Tokunori Ikegami [Wed, 23 Mar 2022 17:04:56 +0000 (02:04 +0900)]
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.
====================
Add reset deassertion for Aspeed MDIO
Add missing reset deassertion for Aspeed MDIO bus controller. The reset
is asserted by the hardware when power-on so the driver only needs to
deassert it. To be able to work with the old DT blobs, the reset is
optional since it may be deasserted by the bootloader or the previous
kernel.
V6:
- fix merge conflict for net-next
V5:
- fix error of dt_binding_check
V4:
- use ASPEED_RESET_MII instead of hardcoding in dt-binding example
V3:
- remove reset property from the required list of the device tree
bindings
- remove "Cc: stable@vger.kernel.org" from the commit messages
- add more description in the commit message of the dt-binding
V2:
- add reset property in the device tree bindings
- add reset assertion in the error path and driver remove
====================
Add reset assertion/deassertion for Aspeed MDIO. There are 4 MDIO
controllers embedded in Aspeed AST2600 SOC and share one reset control
register SCU50[3]. To work with old DT blobs which don't have the reset
property, devm_reset_control_get_optional_shared is used in this change.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dt-bindings: net: add reset property for aspeed, ast2600-mdio binding
The AST2600 MDIO bus controller has a reset control bit and must be
deasserted before manipulating the MDIO controller. By default, the
hardware asserts the reset so the driver only need to deassert it.
Regarding to the old DT blobs which don't have reset property in them,
the reset deassertion is usually done by the bootloader so the reset
property is optional to work with them.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dave Airlie [Thu, 28 Apr 2022 05:32:29 +0000 (15:32 +1000)]
Merge tag 'drm-intel-gt-next-2022-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- GuC hwconfig support and query (John Harrison, Rodrigo Vivi, Tvrtko Ursulin)
- Sysfs support for multi-tile devices (Andi Shyti, Sujaritha Sundaresan)
- Per client GPU utilisation via fdinfo (Tvrtko Ursulin, Ashutosh Dixit)
- Add DRM_I915_QUERY_GEOMETRY_SUBSLICES (Matt Atwood)
Cross-subsystem Changes:
- Add GSC as a MEI auxiliary device (Tomas Winkler, Alexander Usyskin)
Core Changes:
- Document fdinfo format specification (Tvrtko Ursulin)
Driver Changes:
- Fix prime_mmap to work when using LMEM (Gwan-gyeong Mun)
- Fix vm open count and remove vma refcount (Thomas Hellström)
- Fixup setting screen_size (Matthew Auld)
- Opportunistically apply ALLOC_CONTIGIOUS (Matthew Auld)
- Limit where we apply TTM_PL_FLAG_CONTIGUOUS (Matthew Auld)
- Drop aux table invalidation on FlatCCS platforms (Matt Roper)
- Add missing boundary check in vm_access (Mastan Katragadda)
- Update topology dumps for Xe_HP (Matt Roper)
- Add support for steered register writes (Matt Roper)
- Add steering info to GuC register save/restore list (Daniele Ceraolo Spurio)
- Small PCI BAR enabling (Matthew Auld, Akeem G Abodunrin, CQ Tang)
- Add preemption changes for Wa_14015141709 (Akeem G Abodunrin)
- Add logical mapping for video decode engines (Matthew Brost)
- Don't evict unmappable VMAs when pinning with PIN_MAPPABLE (v2) (Vivek Kasireddy)
- GuC error capture support (Alan Previn, Daniele Ceraolo Spurio)
- avoid concurrent writes to aux_inv (Fei Yang)
- Add Wa_22014226127 (José Roberto de Souza)
- Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL (Matt Roper)
- Evict and restore of compressed objects (Ramalingam C)
- Update to GuC version 70.1.1 (John Harrison)
- Add Wa_22011802037 force cs halt (Tilak Tangudu)
- Enable Wa_22011802037 for gen12 GuC based platforms (Umesh Nerlige Ramappa)
- GuC based workarounds for DG2 (Vinay Belgaumkar, John Harrison, Matthew Brost, José Roberto de Souza)
- consider min_page_size when migrating (Matthew Auld)
- Prep work for next GuC firmware release (John Harrison)
- Support platforms with CCS engines but no RCS (Matt Roper, Stuart Summers)
- Don't overallocate subslice storage (Matt Roper)
- Reduce stack usage in debugfs due to SSEU (John Harrison)
- Report steering details in debugfs (Matt Roper)
- Refactor some x86-ism out to prepare for non-x86 builds (Michael Cheng)
- add lmem_size modparam (CQ Tang)
- Refactor for non-x86 driver builds (Casey Bowman)
- Centralize computation of freq caps (Ashutosh Dixit)
- Update dma_buf_ops.unmap_dma_buf callback to use drm_gem_unmap_dma_buf() (Gwan-gyeong Mun)
- Limit the async bind to bind_async_flags (Matthew Auld)
- Stop checking for NULL vma->obj (Matthew Auld)
- Reduce overzealous alignment constraints for GGTT (Matthew Auld)
- Remove GEN12_SFC_DONE_MAX from register defs header (Matt Roper)
- Fix renamed struct field (Lucas De Marchi)
- Do not return '0' if there is nothing to return (Andi Shyti)
- fix i915_reg_t initialization (Jani Nikula)
- move the migration sanity check (Matthew Auld)
- handle more rounding in selftests (Matthew Auld)
- Perf and i915 query kerneldoc updates (Matt Roper)
- Use i915_probe_error instead of drm_err (Vinay Belgaumkar)
- sanity check object size in the buddy allocator (Matthew Auld)
- fixup selftests min_alignment usage (Matthew Auld)
- tweak selftests misaligned_case (Matthew Auld)
John Harrison [Wed, 27 Apr 2022 16:55:50 +0000 (09:55 -0700)]
drm/i915/dg2: Define GuC firmware version for DG2
First release of GuC for DG2.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com> CC: Tomasz Mistat <tomasz.mistat@intel.com> CC: Ramalingam C <ramalingam.c@intel.com> CC: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220427165550.3636686-3-John.C.Harrison@Intel.com
David Jeffery [Wed, 27 Apr 2022 18:32:50 +0000 (14:32 -0400)]
scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data
With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target
subsystem to mark commands which have both data to return as well as sense
data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is
no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core
to call iscsit data-in callbacks even if there is no data, which iscsit
does not support. This results in iscsit going into an error state
requiring recovery and being unable to complete the command to the
initiator.
This issue can be resolved by fixing pscsi to only set
SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the
sense data.
Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads") Reported-by: Scott Hamilton <scott.hamilton@atos.net> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
samples/bpf: Detach xdp prog when program exits unexpectedly in xdp_rxq_info_user
When xdp_rxq_info_user program exits unexpectedly, it doesn't detach xdp
prog of device, and other xdp prog can't be attached to the device. So
call init_exit() to detach xdp prog when program exits unexpectedly.
bpf/selftests: Add granular subtest output for prog_test
Implement per subtest log collection for both parallel
and sequential test execution. This allows granular
per-subtest error output in the 'All error logs' section.
Add subtest log transfer into the protocol during the
parallel test execution.
Move all test log printing logic into dump_test_log
function. One exception is the output of test names when
verbose printing is enabled. Move test name/result
printing into separate functions to avoid repetition.
Print all successful subtest results in the log. Print
only failed test logs when test does not have subtests.
Or only failed subtests' logs when test has subtests.
Disable 'All error logs' output when verbose mode is
enabled. This functionality was already broken and is
causing confusion.
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.19/drivers
Pull MD updates from Song:
"1. Improve annotation in raid5 code, by Logan Gunthorpe.
2. Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk.
3. Other small fixes/cleanups."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Replace role magic numbers with defined constants
md/raid0: Ignore RAID0 layout if the second zone has only one device
md/raid5: Annotate functions that hold device_lock with __must_hold
md/raid5-ppl: Annotate with rcu_dereference_protected()
md/raid5: Annotate rdev/replacement access when mddev_lock is held
md/raid5: Annotate rdev/replacement accesses when nr_pending is elevated
md/raid5: Add __rcu annotation to struct disk_info
md/raid5: Un-nest struct raid5_percpu definition
md/raid5: Cleanup setup_conf() error returns
md: replace deprecated strlcpy & remove duplicated line
md/bitmap: don't set sb values if can't pass sanity check
md: fix an incorrect NULL check in md_reload_sb
md: fix an incorrect NULL check in does_sb_need_changing
raid5: introduce MD_BROKEN
md: Set MD_BROKEN for RAID1 and RAID10
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Matt Roper [Mon, 25 Apr 2022 21:12:50 +0000 (14:12 -0700)]
drm/i915: Add first set of DG2 PCI IDs
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).
The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.
Bspec: 44477 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
net: dsa: ksz9477: move get_stats64 to ksz_common.c
The mib counters for the ksz9477 is same for the ksz9477 switch and
LAN937x switch. Hence moving it to ksz_common.c file in order to have it
generic function. The DSA hook get_stats64 now can call ksz_get_stats64.
Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.
If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.
This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.
We've added 5 non-merge commits during the last 20 day(s) which contain
a total of 6 files changed, 34 insertions(+), 12 deletions(-).
The main changes are:
1) Fix xsk sockets when rx and tx are separately bound to the same umem, also
fix xsk copy mode combined with busy poll, from Maciej Fijalkowski.
2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered
a crash due to invalid metadata_dst access, from Eyal Birger.
3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen.
4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki.
(Masami & Steven preferred this small fix to be routed via bpf tree given it's
follow-up fix to Masami's rethook work that went via bpf earlier, too.)
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix possible crash when multiple sockets are created
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
bpf: Fix release of page_pool in BPF_PROG_RUN in test runner
xsk: Fix l2fwd for copy mode + busy poll combo
====================
Marc Zyngier [Thu, 21 Apr 2022 14:38:10 +0000 (15:38 +0100)]
KVM: arm64: Inject exception on out-of-IPA-range translation fault
When taking a translation fault for an IPA that is outside of
the range defined by the hypervisor (between the HW PARange and
the IPA range), we stupidly treat it as an IO and forward the access
to userspace. Of course, userspace can't do much with it, and things
end badly.
Arguably, the guest is braindead, but we should at least catch the
case and inject an exception.
Check the faulting IPA against:
- the sanitised PARange: inject an address size fault
- the IPA size: inject an abort
Reported-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 8 Apr 2022 11:51:34 +0000 (19:51 +0800)]
drm/amd/pm: fix the deadlock issue observed on SI
The adev->pm.mutx is already held at the beginning of
amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce.
But on their calling path, amdgpu_display_bandwidth_update will be
called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They
will then try to acquire the same adev->pm.mutex and deadlock will
occur.
By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex
protection(considering logically they do not need such protection) and
restructuring the call flow accordingly, we can eliminate the deadlock
issue. This comes with no real logics change.
Jakob Koschel [Wed, 27 Apr 2022 17:07:34 +0000 (19:07 +0200)]
tracing: Remove check of list iterator against head past the loop body
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Jakob Koschel [Wed, 27 Apr 2022 17:07:33 +0000 (19:07 +0200)]
tracing: Replace usage of found with dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Jakob Koschel [Wed, 27 Apr 2022 17:07:31 +0000 (19:07 +0200)]
tracing: Remove usage of list iterator after the loop body
In preparation to limit the scope of the list iterator variable to the
traversal loop, use a dedicated pointer to point to the found element
[1].
Before, the code implicitly used the head when no element was found
when using &pos->list. Since the new variable is only set if an
element was found, the head needs to be used explicitly if the
variable is NULL.
ring-buffer: Have 32 bit time stamps use all 64 bits
When the new logic was made to handle deltas of events from interrupts
that interrupted other events, it required 64 bit local atomics.
Unfortunately, 64 bit local atomics are expensive on 32 bit architectures.
Thus, commit 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations
for speeding up 32 bit") created a type of seq lock timer for 32 bits.
It used two 32 bit local atomics, but required 2 bits from them each for
synchronization, making it only 60 bits.
Add a new "msb" field to hold the extra 4 bits that are cut off.
Alex Deucher [Tue, 28 Dec 2021 22:26:24 +0000 (17:26 -0500)]
drm/amdgpu: don't runtime suspend if there are displays attached (v3)
We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.
Prior to
commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.
v2: move check into runtime_suspend
v3: wake ups -> wakeups in comment, retain pm_runtime behavior in
runtime_idle callback
Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/ Tested-by: Michele Ballabio <ballabio.m@gmail.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
David Yat Sin [Wed, 13 Apr 2022 15:37:53 +0000 (11:37 -0400)]
drm/amdkfd: CRIU add support for GWS queues
Add support to checkpoint/restore GWS (Global Wave Sync) queues.
Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Yat Sin [Mon, 18 Apr 2022 15:55:58 +0000 (11:55 -0400)]
drm/amdkfd: Fix GWS queue count
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alexandru Elisei [Mon, 25 Apr 2022 14:55:30 +0000 (15:55 +0100)]
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
kvm->arch.arm_pmu is set when userspace attempts to set the first PMU
attribute. As certain attributes are mandatory, arm_pmu ends up always
being set to a valid arm_pmu, otherwise KVM will refuse to run the VCPU.
However, this only happens if the VCPU has the PMU feature. If the VCPU
doesn't have the feature bit set, kvm->arch.arm_pmu will be left
uninitialized and equal to NULL.
KVM doesn't do ID register emulation for 32-bit guests and accesses to the
PMU registers aren't gated by the pmu_visibility() function. This is done
to prevent injecting unexpected undefined exceptions in guests which have
detected the presence of a hardware PMU. But even though the VCPU feature
is missing, KVM still attempts to emulate certain aspects of the PMU when
PMU registers are accessed. This leads to a NULL pointer dereference like
this one, which happens on an odroid-c4 board when running the
kvm-unit-tests pmu-cycle-counter test with kvmtool and without the PMU
feature being set:
In this particular case, Linux hasn't detected the presence of a hardware
PMU because the PMU node is missing from the DTB, so userspace would have
been unable to set the VCPU PMU feature even if it attempted it. What
happens is that the 32-bit guest reads ID_DFR0, which advertises the
presence of the PMU, and when it tries to program a counter, it triggers
the NULL pointer dereference because kvm->arch.arm_pmu is NULL.
kvm-arch.arm_pmu was introduced by commit 46b187821472 ("KVM: arm64:
Keep a per-VM pointer to the default PMU"). Until that commit, this
error would be triggered instead:
The root cause remains the same: kvm->arch.pmuver was never set to
something sensible because the VCPU feature itself was never set.
The odroid-c4 is somewhat of a special case, because Linux doesn't probe
the PMU. But the above errors can easily be reproduced on any hardware,
with or without a PMU driver, as long as userspace doesn't set the PMU
feature.
Work around the fact that KVM advertises a PMU even when the VCPU feature
is not set by gating all PMU emulation on the feature. The guest can still
access the registers without KVM injecting an undefined exception.
Will Deacon [Wed, 27 Apr 2022 17:13:32 +0000 (18:13 +0100)]
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
When pKVM is enabled, host memory accesses are translated by an identity
mapping at stage-2, which is populated lazily in response to synchronous
exceptions from 64-bit EL1 and EL0.
Extend this handling to cover exceptions originating from 32-bit EL0 as
well. Although these are very unlikely to occur in practice, as the
kernel typically ensures that user pages are initialised before mapping
them in, drivers could still map previously untouched device pages into
userspace and expect things to work rather than panic the system.
Subsystems affected by this patch series: mm/kasan and mm/debug"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
docs: vm/page_owner: use literal blocks for param description
kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/
destroy(). The kasan_quarantine_remove_cache() call is protected by
cpuslock in kmem_cache_destroy() to ensure serialization with
kasan_cpu_offline().
However the kasan_quarantine_remove_cache() call is not protected by
cpuslock in kmem_cache_shrink(). When a CPU is going offline and cache
shrink occurs at same time, the cpu_quarantine may be corrupted by
interrupt (per_cpu_remove_cache operation).
So add a cpu_quarantine offline flags check in per_cpu_remove_cache().
[akpm@linux-foundation.org: add comment, per Zqiang]
Filipe Manana [Thu, 21 Apr 2022 10:01:22 +0000 (11:01 +0100)]
btrfs: skip compression property for anything other than files and dirs
The compression property only has effect on regular files and directories
(so that it's propagated to files and subdirectories created inside a
directory). For any other inode type (symlink, fifo, device, socket),
it's pointless to set the compression property because it does nothing
and ends up unnecessarily wasting leaf space due to the pointless xattr
(75 or 76 bytes, depending on the compression value). Symlinks in
particular are very common (for example, I have almost 10k symlinks under
/etc, /usr and /var alone) and therefore it's worth to avoid wasting
leaf space with the compression xattr.
For example, the compression property can end up on a symlink or character
device implicitly, through inheritance from a parent directory
$ mkdir /mnt/testdir
$ btrfs property set /mnt/testdir compression lzo
Filipe Manana [Thu, 21 Apr 2022 10:03:09 +0000 (11:03 +0100)]
btrfs: do not BUG_ON() on failure to update inode when setting xattr
We are doing a BUG_ON() if we fail to update an inode after setting (or
clearing) a xattr, but there's really no reason to not instead simply
abort the transaction and return the error to the caller. This should be
a rare error because we have previously reserved enough metadata space to
update the inode and the delayed inode should have already been setup, so
an -ENOSPC or -ENOMEM, which are the possible errors, are very unlikely to
happen.
So replace the BUG_ON()s with a transaction abort.
CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 21 Apr 2022 09:56:39 +0000 (10:56 +0100)]
btrfs: always log symlinks in full mode
On Linux, empty symlinks are invalid, and attempting to create one with
the system call symlink(2) results in an -ENOENT error and this is
explicitly documented in the man page.
If we rename a symlink that was created in the current transaction and its
parent directory was logged before, we actually end up logging the symlink
without logging its content, which is stored in an inline extent. That
means that after a power failure we can end up with an empty symlink,
having no content and an i_size of 0 bytes.
It can be easily reproduced like this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ sync
# Create a file inside the directory and fsync the directory.
$ touch /mnt/testdir/foo
$ xfs_io -c "fsync" /mnt/testdir
# Create a symlink inside the directory and then rename the symlink.
$ ln -s /mnt/testdir/foo /mnt/testdir/bar
$ mv /mnt/testdir/bar /mnt/testdir/baz
# Now fsync again the directory, this persist the log tree.
$ xfs_io -c "fsync" /mnt/testdir
<power failure>
$ mount /dev/sdc /mnt
$ stat -c %s /mnt/testdir/baz
0
$ readlink /mnt/testdir/baz
$
Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that
their content is also logged.
A test case for fstests will follow.
CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: do not allow compression on nodatacow files
Compression and nodatacow are mutually exclusive. A similar issue was
fixed by commit f37c563bab429 ("btrfs: add missing check for nocow and
compression inode flags"). Besides ioctl, there is another way to
enable/disable/reset compression directly via xattr. The following
steps will result in a invalid combination.
$ touch bar
$ chattr +C bar
$ lsattr bar
---------------C-- bar
$ setfattr -n btrfs.compression -v zstd bar
$ lsattr bar
--------c------C-- bar
To align with the logic in check_fsflags, nocompress will also be
unacceptable after this patch, to prevent mix any compression-related
options with nodatacow.
$ touch bar
$ chattr +C bar
$ lsattr bar
---------------C-- bar
$ setfattr -n btrfs.compression -v zstd bar
setfattr: bar: Invalid argument
$ setfattr -n btrfs.compression -v no bar
setfattr: bar: Invalid argument
When both compression and nodatacow are enabled, then
btrfs_run_delalloc_range prefers nodatacow and no compression happens.
Reported-by: Jayce Lin <jaycelin@synology.com> CC: stable@vger.kernel.org # 5.10.x: e6f9d6964802: btrfs: export a helper for compression hard check CC: stable@vger.kernel.org # 5.10.x Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
inode_can_compress will be used outside of inode.c to check the
availability of setting compression flag by xattr. This patch moves
this function as an internal helper and renames it to
btrfs_inode_can_compress.
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
ring-buffer: Have absolute time stamps handle large numbers
There's an absolute timestamp event in the ring buffer, but this only
saves 59 bits of the timestamp, as the 5 MSB is used for meta data
(stating it is an absolute time stamp). This was never an issue as all the
clocks currently in use never used those 5 MSB. But now there's a new
clock (TAI) that does.
To handle this case, when reading an absolute timestamp, a previous full
timestamp is passed in, and the 5 MSB of that timestamp is OR'd to the
absolute timestamp (if any of the 5 MSB are set), and then to test for
overflow, if the new result is smaller than the passed in previous
timestamp, then 1 << 59 is added to it.
All the extra processing is done on the reader "slow" path, with the
exception of the "too big delta" check, and the reading of timestamps
for histograms.
Note, libtraceevent will need to be updated to handle this case as well.
But this is not a user space regression, as user space was never able to
handle any timestamps that used more than 59 bits.
* bio_issue_time() is stored in bio->bi_issue truncated to 51 bits. This
overflows in slightly over 26 days. Setting rq->io_start_time_ns with it
means that io duration calculation would yield >26days after 26 days of
uptime. This, for example, confuses kyber making it cause high IO
latencies.
* rq->io_start_time_ns should record the time that the IO is issued to the
device so that on-device latency can be measured. However,
bio_issue_time() is set before the bio goes through the rq-qos controllers
(wbt, iolatency, iocost), so when the bio gets throttled in any of the
mechanisms, the measured latencies make no sense - on-device latencies end
up higher than request-alloc-to-completion latencies.
We'll need a smarter way to avoid calling ktime_get_ns() repeatedly
back-to-back. For now, let's revert the commit.
HSMP protocol version 5 is supported on AMD family 19h model 10h
EPYC processors. This version brings new features such as
-- DIMM statistics
-- Bandwidth for IO and xGMI links
-- Monitor socket and core frequency limits
-- Configure power efficiency modes, DF pstate range etc
Signed-off-by: Suma Hegde <suma.hegde@amd.com> Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20220427152248.25643-1-nchatrad@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Juergen Gross [Fri, 18 Mar 2022 15:09:50 +0000 (16:09 +0100)]
platform/x86/dell: add buffer allocation/free functions for SMI calls
The dcdbas driver is used to call SMI handlers for both, dcdbas and
dell-smbios-smm. Both drivers allocate a buffer for communicating
with the SMI handler. The physical buffer address is then passed to
the called SMI handler via %ebx.
Unfortunately this doesn't work when running in Xen dom0, as the
physical address obtained via virt_to_phys() is only a guest physical
address, and not a machine physical address as needed by SMI.
The problem in dcdbas is easy to correct, as dcdbas is using
dma_alloc_coherent() for allocating the buffer, and the machine
physical address is available via the DMA address returned in the DMA
handle.
In order to avoid duplicating the buffer allocation code in
dell-smbios-smm, add a generic buffer allocation function to dcdbas
and use it for both drivers. This is especially fine regarding driver
dependencies, as dell-smbios-smm is already calling dcdbas to generate
the SMI request.
Heikki Krogerus [Mon, 25 Apr 2022 11:45:44 +0000 (14:45 +0300)]
ACPI: OSL: Remove the helper for deactivating memory region
There are no more users for acpi_release_memory().
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Heikki Krogerus [Mon, 25 Apr 2022 11:45:43 +0000 (14:45 +0300)]
usb: typec: ucsi: acpi: Map the mailbox with memremap()
The UCSI mailbox is always in main memory.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Sapphire Rapids (SPR) C6 optimization was added to the end of the
'spr_idle_state_table_update()' function. However, the function has a
'return' which may happen before the optimization has a chance to run.
And this may prevent the optimization from happening.
This is an unlikely scenario, but possible if user boots with, say,
the 'intel_idle.preferred_cstates=6' kernel boot option.
This patch fixes the issue by eliminating the problematic 'return'
statement.
Fixes: 3a9cf77b60dc ("intel_idle: add core C6 optimization for SPR") Suggested-by: Jan Beulich <jbeulich@suse.com> Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
intel_idle: Fix the 'preferred_cstates' module parameter
Problem description.
When user boots kernel up with the 'intel_idle.preferred_cstates=4' option,
we enable C1E and disable C1 states on Sapphire Rapids Xeon (SPR). In order
for C1E to work on SPR, we have to enable the C1E promotion bit on all
CPUs. However, we enable it only on one CPU.
Fix description.
The 'intel_idle' driver already has the infrastructure for disabling C1E
promotion on every CPU. This patch uses the same infrastructure for
enabling C1E promotion on every CPU. It changes the boolean
'disable_promotion_to_c1e' variable to a tri-state 'c1e_promotion'
variable.
Tested on a 2-socket SPR system. I verified the following combinations:
* C1E promotion enabled and disabled in BIOS.
* Booted with and without the 'intel_idle.preferred_cstates=4' kernel
argument.
In all 4 cases C1E promotion was correctly set on all CPUs.
Also tested on an old Broadwell system, just to make sure it does not cause
a regression. C1E promotion was correctly disabled on that system, both C1
and C1E were exposed (as expected).
Fixes: da0e58c038e6 ("intel_idle: add 'preferred_cstates' module argument") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rob Herring [Tue, 26 Apr 2022 13:35:08 +0000 (08:35 -0500)]
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
The binding has both 'unevaluatedProperties: false' and
'additionalProperties: false' which is redundant. 'additionalProperties'
is the stricter of the two, so drop 'unevaluatedProperties'.
Thomas Gleixner [Mon, 25 Apr 2022 15:45:42 +0000 (17:45 +0200)]
x86/aperfmperf: Integrate the fallback code from show_cpuinfo()
Due to the avoidance of IPIs to idle CPUs arch_freq_get_on_cpu() can return
0 when the last sample was too long ago.
show_cpuinfo() has a fallback to cpufreq_quick_get() and if that fails to
return cpu_khz, but the readout code for the per CPU scaling frequency in
sysfs does not.
Move that fallback into arch_freq_get_on_cpu() so the behaviour is the same
when reading /proc/cpuinfo and /sys/..../cur_scaling_freq.
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Doug Smythies <dsmythies@telus.net> Link: https://lore.kernel.org/r/87pml5180p.ffs@tglx
Thomas Gleixner [Fri, 15 Apr 2022 19:20:04 +0000 (21:20 +0200)]
x86/aperfmperf: Replace arch_freq_get_on_cpu()
Reading the current CPU frequency from /sys/..../scaling_cur_freq involves
in the worst case two IPIs due to the ad hoc sampling.
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them and consolidate this with the /proc/cpuinfo readout.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
The resulting text size vs. the original APERF/MPERF plus the separate
frequency invariance code:
text: 2411 -> 723
init.text: 0 -> 767
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.934040006@linutronix.de
Thomas Gleixner [Fri, 15 Apr 2022 19:20:02 +0000 (21:20 +0200)]
x86/aperfmperf: Replace aperfmperf_get_khz()
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them for the cpu frequency display in /proc/cpuinfo.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
This gets rid of the mass IPIs and a delay of 20ms for stabilizing observed
by Eric when reading /proc/cpuinfo.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.875029458@linutronix.de
Thomas Gleixner [Fri, 15 Apr 2022 19:20:01 +0000 (21:20 +0200)]
x86/aperfmperf: Store aperf/mperf data for cpu frequency reads
Now that the MSR readout is unconditional, store the results in the per CPU
data structure along with a jiffies timestamp for the CPU frequency readout
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.817702355@linutronix.de
Thomas Gleixner [Fri, 15 Apr 2022 19:19:59 +0000 (21:19 +0200)]
x86/aperfmperf: Make parts of the frequency invariance code unconditional
The frequency invariance support is currently limited to x86/64 and SMP,
which is the vast majority of machines.
arch_scale_freq_tick() is called every tick on all CPUs and reads the APERF
and MPERF MSRs. The CPU frequency getters function do the same via dedicated
IPIs.
While it could be argued that on systems where frequency invariance support
is disabled (32bit, !SMP) the per tick read of the APERF and MPERF MSRs can
be avoided, it does not make sense to keep the extra code and the resulting
runtime issues of mass IPIs around.
As a first step split out the non frequency invariance specific
initialization code and the read MSR portion of arch_scale_freq_tick(). The
rest of the code is still conditional and guarded with a static key.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.761988704@linutronix.de
projects / people / ms / linux.git / log
