Li Zhengyu [Wed, 1 Jun 2022 07:02:04 +0000 (15:02 +0800)]
RISC-V: kexec: Fix build error without CONFIG_KEXEC
When CONFIG_KEXEC_FILE=y but CONFIG_KEXEC is not set:
kernel/kexec_core.o: In function `kimage_free':
kexec_core.c:(.text+0xa0c): undefined reference to `machine_kexec_cleanup'
kernel/kexec_core.o: In function `.L0 ':
kexec_core.c:(.text+0xde8): undefined reference to `machine_crash_shutdown'
kexec_core.c:(.text+0xdf4): undefined reference to `machine_kexec'
kernel/kexec_core.o: In function `.L231':
kexec_core.c:(.text+0xe1c): undefined reference to `riscv_crash_save_regs'
kernel/kexec_core.o: In function `.L0 ':
kexec_core.c:(.text+0x119e): undefined reference to `machine_shutdown'
kernel/kexec_core.o: In function `.L312':
kexec_core.c:(.text+0x11b2): undefined reference to `machine_kexec'
kernel/kexec_file.o: In function `.L0 ':
kexec_file.c:(.text+0xb84): undefined reference to `machine_kexec_prepare'
kernel/kexec_file.o: In function `.L177':
kexec_file.c:(.text+0xc5a): undefined reference to `machine_kexec_prepare'
Makefile:1160: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
These symbols should depend on CONFIG_KEXEC_CORE rather than CONFIG_KEXEC
when kexec_file has been implemented on RISC-V, like the other archs have
done.
Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220601070204.26882-1-lizhengyu3@huawei.com Fixes: 6261586e0c91 ("RISC-V: Add kexec_file support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jonathan Corbet [Thu, 14 Jul 2022 21:12:12 +0000 (15:12 -0600)]
Merge branch 'submitting-drivers-removal' into docs-next
Lukas Bulwahn says:
Here is an attempt to delete submitting-drivers with some improvements
and clean-up in other documentation places to convince ourselves that
nothing valuable is lost when deleting this checklist.
Patch 1, 2 and 3 is just basic clean-up before adding a new reference
(see Patch 4). Patch 4 adds the one reference from submitting-drivers,
not already mentioned elsewhere in the repository. Patch 5 updates a
confusing statement in devices.rst from earlier .txt/.tex distinction
times to the new state now with Sphinx & .rst.
Patch 6 finally deletes the outdated document, with a cross-check what is
covered elsewhere and few open questions (see below).
Patch 7 and 8 have been reworked with the native-speaking doc
maintainers; they cause no new warnings and are ready to pick,
Patch 9 to 11 are weak attempts to adjust the translation, but they need
to be taken further by others due to my lack of knowledge on the other
languages. They would currently also cause new warnings in the doc-build
right now. They should not be picked if there is no one to continue to
adjust the text and fix the warnings on broken references.
Additionally, this branch includes a translation fix from Alex Shi.
docs: ja_JP: howto: remove reference to removed submitting-drivers
The document submitting-drivers.rst was deleted. This removes the
corresponding reference in the Japanese translation of the howto,
with some assistance from Akira Yokasawa.
Commit 31b24bee3357 ("docs: add a warning to submitting-drivers.rst")
in October 2016 already warns "This (...) should maybe just be deleted,
but I'm not quite ready to do that yet".
Maybe, six years ago, we were not ready but let us remove old content
for the better now and structure and maintain less content in the kernel
documentation with a better result.
Drop this already outdated document and adjust all textual references.
Here is an argument why deleting the content will not remove any useful
information to the existing kernel documentation, individually broken down
for each section.
Section "Allocating Device Numbers" refers to https://www.lanana.org/, and
then refers to Documentation/admin-guide/devices.rst.
However, the devices.rst clearly states:
"The version of this document at lanana.org is no longer maintained."
Everything needed for submitting drivers is already stated in devices.rst
and the reference to https://www.lanana.org/ is outdated, and should be
just deleted.
Section "Who To Submit Drivers To" is all about Linux 2.0 - 2.6, before
the new release version scheme; the mentioned developers are still around,
but actually not the first developers to contact anymore.
Section "What Criteria Determine Acceptance" has a few bullet points:
Licensing and Copyright is well-covered in process/kernel-license.rst.
Interfaces, Code, Portability, Clarity state some obvious things about
ensuring kernel code quality.
Control suggests to add a MAINTAINERS entry, which is already mentioned in
6.Followthrough.rst: "... added yourself to the MAINTAINERS file..."
PM support states a bit about implementing and testing power management of
a driver, it remains an open question where to place that in the process
documents. Driver developers interested in power management will find the
corresponding part on power management in the kernel documentation anyway.
In section "What Criteria Do Not Determine Acceptance", the points Vendor
and Author states something basic consequence of the kernel being an
open-source community software development. Probably no need to mention it
nowadays.
Section "Resources" lists resources that are also mentioned elsewhere more
central.
- Linux kernel tree and mailing list is mentioned in many places.
- https://lwn.net/Kernel/LDD3/ is mentioned in
Documentation/process/kernel-docs.rst.
- https://lwn.net/ is mentioned in:
- Documentation/process/8.Conclusion.rst
- Documentation/process/kernel-docs.rst
- https://kernelnewbies.org/ is mentioned in:
- Documentation/process/8.Conclusion.rst
- Documentation/process/kernel-docs.rst
- http://www.linux-usb.org/ is mentioned in
Documentation/driver-api/usb/usb.rst
- https://landley.net/kdocs/ols/2002/ols2002-pages-545-555.pdf
is mentioned in Documentation/process/kernel-docs.rst
- https://kernelnewbies.org/KernelJanitors is mentioned in
Documentation/process/howto.rst
- https://git-scm.com/ is mentioned in
- Documentation/process/2.Process.rst
- Documentation/process/7.AdvancedTopics.rst
- Documentation/process/howto.rst
docs: admin: devices: drop confusing outdated statement on Latex
The statement that the Latex version of Linux Device List is unmaintained,
must go back to some historic time where there were actually two separate
document sources, one in a txt format and another in a tex format (maybe
even just on lanana.org).
Nowadays, html and tex are generated from the ReST document file and the
statement might be confused, believing the actual generated LaTeX document
from the maintained ReST document could be an unmaintained one.
Remove this statement on the LaTeX version and only keep pointing out that
the version on lanana.org is no longer maintained.
docs: kernel-docs: add a reference mentioned in submitting-drivers.rst
One section in submitting-drivers.rst was just a collection of references
to other external documentation. All except the one added in this commit
is already mentioned in kernel-docs or other places in the kernel
documentation.
Add Arjan van de Ven's article on How to NOT write kernel driver to this
index of further kernel documentation.
docs: kernel-docs: reflect that it is community-maintained
Remove and rephrase statements that only make sense if a single author
exclusively would maintain this document, but we would really want to
consider this being a page maintained by the kernel community, as it is
placed in the kernel repository, and let us hope that more contributors
suggest some more documents.
The original title comes from copying the content from a web page that
covered various mixed computer-science material. Within the kernel
documentation and its current structure, the title can be shortened.
Other titles considered, but not selected were:
- Index of More Kernel Documentation
- Further Kernel Documentation
- References to Further Kernel Documentation
docs: kernel-docs: order reference from newest to oldest
The documents on each section of this document are ordered by its
published date, from the newest to the oldest.
In the kernel-docs.rst, the references on each section of this document
are intended to be ordered by its published date, from the newest to the
oldest. The Linux Kernel Module Programming Guide was published in 2021;
so, it is placed at the top as the most recent publication after the
rolling-version "Linux Kernel Mailing List Glossary" reference.
Ben Dooks [Thu, 14 Jul 2022 10:51:01 +0000 (11:51 +0100)]
bpf: Add endian modifiers to fix endian warnings
A couple of the syscalls which load values (bpf_skb_load_helper_16() and
bpf_skb_load_helper_32()) are using u16/u32 types which are triggering
warnings as they are then converted from big-endian to CPU-endian. Fix
these by making the types __be instead.
Fixes the following sparse warnings:
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Add documentation for the new attributes:
- "asic2_health" - health of 2-nd ASIC for system equipped with two ASICs.
- "asic_reset" and "asic2_reset" - ASICs reset control.
- "comm_chnl_ready" - communication channel indication to remote end (BMC).
- "config3" - indication of system minor BOM changes.
bpf: Warn on non-preallocated case for BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE
BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE is also tracing type, which may
cause unexpected memory allocation if we set BPF_F_NO_PREALLOC. Let's
also warn on it similar as we do in case of BPF_PROG_TYPE_RAW_TRACEPOINT.
When application runs in busy poll mode and does not receive a single
packet but only sends them, it is currently impossible to get into
napi_busy_loop() as napi_id is only marked on Rx side in xsk_rcv_check().
In there, napi_id is being taken from xdp_rxq_info carried by xdp_buff.
From Tx perspective, we do not have access to it. What we have handy is
the xsk pool.
Xsk pool works on a pool of internal xdp_buff wrappers called xdp_buff_xsk.
AF_XDP ZC enabled drivers call xp_set_rxq_info() so each of xdp_buff_xsk
has a valid pointer to xdp_rxq_info of underlying queue. Therefore, on Tx
side, napi_id can be pulled from xs->pool->heads[0].xdp.rxq->napi_id. Hide
this pointer chase under helper function, xsk_pool_get_napi_id().
Do this only for sockets working in ZC mode as otherwise rxq pointers would
not be initialized.
selftests/landlock: drop deprecated headers dependency
The khdr make target has been removed, so drop it from the landlock
Makefile dependencies as well as related include paths that are
standard for headers in the kernel tree.
Lyude Paul [Thu, 14 Jul 2022 17:42:34 +0000 (13:42 -0400)]
drm/nouveau: Don't pm_runtime_put_sync(), only pm_runtime_put_autosuspend()
While trying to fix another issue, it occurred to me that I don't actually
think there is any situation where we want pm_runtime_put() in nouveau to
be synchronous. In fact, this kind of just seems like it would cause
issues where we may unexpectedly block a thread we don't expect to be
blocked.
So, let's only use pm_runtime_put_autosuspend().
Changes since v1:
* Use pm_runtime_put_autosuspend(), not pm_runtime_put()
Wolfram Sang [Wed, 13 Jul 2022 20:46:21 +0000 (22:46 +0200)]
selftests: timers: clocksource-switch: adapt to kselftest framework
So we have proper counters at the end of a test. We also print the
kselftest header at the end of the test, so we don't mix with the output
of the child process. There is only this one test anyhow.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Wolfram Sang [Wed, 13 Jul 2022 20:46:17 +0000 (22:46 +0200)]
selftests: timers: clocksource-switch: fix passing errors from child
The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.
Fixes: 7290ce1423c3 ("selftests/timers: Add clocksource-switch test from timetest suite") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
platform/x86: mlx-platform: Add COME board revision register
Extend COME CPLD with board configuration register for getting board
revision. The value of this register is pushed by hardware through GPIO
pins.
The purpose of it is to expose some minor BOM changes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-7-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: mlx-platform: Add support for new system XH3000
Add support for new system type XH3000, which is a water cooling
Ethernet switch blade equipped with 32x200G Ethernet ports.
The system is recognized by "DMI_BOARD_NAME" and "DMI_PRODUCT_SKU" matches,
when these fields are set to "VMOD0005" and "HI139" respectively.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Felix Radensky <fradensky@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-6-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
The Vulcan is chassis containing Nvidia's Hopper dGPU (GH100), NVswitch
(LS10) based HGX baseboard and COMe NVSwitch management module.
The system is built for artificial intelligence and accelerated
analytics applications. Vulcan is offered as an HGX product to cloud
service providers and OEMs, who intend to build fully interconnected
GPU systems for large scale deployments.
Driver is extended to support new COMe NVSwitch management module.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-5-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
Motivation is to support new systems equipped with two ASICs.
Extend driver with:
- The second ASIC health event.
- Per ASIC reset control, triggering reset of ASIC internal resources
and restarting ASIC initialization flow.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-4-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: mlx-platform: Add cosmetic changes for alignment
Align the first argument with open parenthesis for
platform_device_register_resndata() calls.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-3-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: mlx-platform: Make activation of some drivers conditional
Current assumption in driver that any system is capable of LED,
hotplug or watchdog support. It could be not true for some new coming
systems.
Add validation for LED, hotplug, watchdog configuration and skip
activation of relevant drivers if not configured.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-2-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lyude Paul [Thu, 26 May 2022 20:43:13 +0000 (16:43 -0400)]
drm/nouveau/kms: Fix failure path for creating DP connectors
It looks like that when we moved nouveau over to using drm_dp_aux_init()
and registering it's aux bus during late connector registration, we totally
forgot to fix the failure codepath in nouveau_connector_create() - as it
still seems to assume that drm_dp_aux_init() can fail (it can't).
So, let's fix that and also add a missing check to ensure that we've
properly allocated nv_connector->aux.name while we're at it.
On LS2K/LS7A, config reads to some non-existent devices don't return
0xffffffff (they are hidden devices for debug, and accessing the config
space may cause machine hang). This is a hardware flaw but we can only
avoid it by software now.
Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch-
based Loongson processors. MIPS-based Loongson uses FDT, while LoongArch-
based Loongson uses ACPI.
Add ACPI init support for the driver in pci-loongson.c because it is
currently FDT-only.
LoongArch is a new RISC ISA, mainline support will come soon, and
documentations are here (in translation):
Muchun Song [Thu, 9 Jun 2022 10:40:32 +0000 (18:40 +0800)]
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if
CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured,
"numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to
fix it.
Fixes: 4518085e127d ("mm, sysctl: make NUMA stats configurable") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
platform/x86: asus-wmi: Add mic-mute LED classdev support
In some new ASUS devices, hotkey Fn+F13 is used for mic mute. If mic-mute
LED is present by checking WMI ASUS_WMI_DEVID_MICMUTE_LED, we will add a
mic-mute LED classdev, asus::micmute, in the asus-wmi driver to control
it. The binding of mic-mute LED controls will be swithched with LED
trigger.
dm writecache: count number of blocks discarded, not number of discard bios
Change dm-writecache, so that it counts the number of blocks discarded
instead of the number of discard bios. Make it consistent with the
read and write statistics counters that were changed to count the
number of blocks instead of bios.
dm writecache: count number of blocks written, not number of write bios
Change dm-writecache, so that it counts the number of blocks written
instead of the number of write bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
dm writecache: count number of blocks read, not number of read bios
Change dm-writecache, so that it counts the number of blocks read
instead of the number of read bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm-kcopyd doesn't access the allocated pages directly, it only passes
them to dm-io which adds them to a bio list - thus, we can allocate
the pages from high memory. This will reduce pressure on the low
memory when there are a large number of kcopyd jobs in progress.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm-writecache has the capability to limit the number of writeback jobs
in progress. However, this feature was off by default. As such there
were some out-of-memory crashes observed when lowering the low
watermark while the cache is full.
This commit enables writeback limit by default. It is set to 256MiB or
1/16 of total system memory, whichever is smaller.
Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Merge tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d95008 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
MAINTAINERS: repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Commit 9f794056db5b ("platform/surface: Add KIP/POS tablet-mode switch
driver") adds the section MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
with a file entry, but the file that is added with this commit is actually
named slightly differently.
Commit 3a0cf7ab8df3 ("ACPI: video: Change how we determine if brightness
key-presses are handled") made acpi_video_handles_brightness_key_presses()
report false when none of the ACPI Video Devices support backlight control.
But it turns out that at least on a Dell Inspiron N4010 there is no ACPI
backlight control, yet brightness hotkeys are still reported through
the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses()
now returns false, brightness keypresses are now reported twice.
To fix this rename the has_backlight flag to may_report_brightness_keys and
also set it the first time a brightness key press event is received.
Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video
Bus event this means that the first brightness key press might still get
reported twice, but all further keypresses will be filtered as before.
Note that this relies on other drivers reporting brightness key events
calling acpi_video_handles_brightness_key_presses() when delivering
the events (rather then once during driver probe). This is already
required and documented in include/acpi/video.h:
/*
* Note: The value returned by acpi_video_handles_brightness_key_presses()
* may change over time and should not be cached.
*/
Merge tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three smb3 client fixes:
- two multichannel fixes: fix a potential deadlock freeing a channel,
and fix a race condition on failed creation of a new channel
- mount failure fix: work around a server bug in some common older
Samba servers by avoiding padding at the end of the negotiate
protocol request"
* tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: workaround negprot bug in some Samba servers
cifs: remove unnecessary locking of chan_lock while freeing session
cifs: fix race condition with delayed threads
Commit 3a0cf7ab8df3 ("ACPI: video: Change how we determine if brightness
key-presses are handled") made acpi_video_handles_brightness_key_presses()
report false when none of the ACPI Video Devices support backlight control.
But it turns out that at least on a Dell Inspiron N4010 there is no ACPI
backlight control, yet brightness hotkeys are still reported through
the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses()
now returns false, brightness keypresses are now reported twice.
To fix this rename the has_backlight flag to may_report_brightness_keys and
also set it the first time a brightness key press event is received.
Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video
Bus event this means that the first brightness key press might still get
reported twice, but all further keypresses will be filtered as before.
Note that this relies on other drivers reporting brightness key events
calling acpi_video_handles_brightness_key_presses() when delivering
the events (rather then once during driver probe). This is already
required and documented in include/acpi/video.h:
/*
* Note: The value returned by acpi_video_handles_brightness_key_presses()
* may change over time and should not be cached.
*/
Merge tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:
- Enable SETATTR(time_create) to fix regression with Mac OS clients
- Fix a lockd crasher and broken NLM UNLCK behavior"
* tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
lockd: fix nlm_close_files
lockd: set fl_owner when unlocking files
NFSD: Decode NFSv4 birth time attribute
Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Here are a number of fixes for recently found bugs.
Only 'ima: fix violation measurement list record' was introduced in
the current release. The rest address existing bugs"
* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix potential memory leak in ima_init_crypto()
ima: force signature verification when CONFIG_KEXEC_SIG is configured
ima: Fix a potential integer overflow in ima_appraise_measurement
ima: fix violation measurement list record
Revert "evm: Fix memleak in init_desc"
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- quieten the spectre-bhb prints
- mark flattened device tree sections as shareable
- remove some obsolete CPU domain code and help text
- fix thumb unaligned access abort emulation
- fix amba_device_add() refcount underflow
- fix literal placement
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9208/1: entry: add .ltorg directive to keep literals in range
ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
ARM: 9213/1: Print message about disabled Spectre workarounds only once
ARM: 9212/1: domain: Modify Kconfig help text
ARM: 9211/1: domain: drop modify_domain()
ARM: 9210/1: Mark the FDT_FIXED sections as shareable
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
tracing: devlink: Use static array for string in devlink_trap_report event
The trace event devlink_trap_report uses the __dynamic_array() macro to
determine the size of the input_dev_name field. This is because it needs
to test the dev field for NULL, and will use "NULL" if it is. But it also
has the size of the dynamic array as a fixed IFNAMSIZ bytes. This defeats
the purpose of the dynamic array, as this will reserve that amount of
bytes on the ring buffer, and to make matters worse, it will even save
that size in the event as the event expects it to be dynamic (for which it
is not).
Since IFNAMSIZ is just 16 bytes, just make it a static array and this will
remove the meta data from the event that records the size.
Link: https://lkml.kernel.org/r/20220712185820.002d9fb5@gandalf.local.home Cc: Leon Romanovsky <leon@kernel.org> Cc: Jiri Pirko <jiri@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
um: Replace to_phys() and to_virt() with less generic function names
The UML function names to_virt() and to_phys() are exposed by UML
headers, and are very generic and may be defined by drivers. As it
turns out, commit 9409c9b6709e ("pmem: refactor pmem_clear_poison()")
did exactly that.
This results in build errors such as the following when trying to build
um:allmodconfig:
drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’:
./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’
105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt))
| ^~~~~~~
Use less generic function names for the um specific to_phys() and
to_virt() functions to fix the problem and to avoid similar problems in
the future.
Fixes: 9409c9b6709e ("pmem: refactor pmem_clear_poison()") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hsin-Yi Wang [Tue, 5 Jul 2022 17:16:49 +0000 (01:16 +0800)]
PM: domains: Ensure genpd_debugfs_dir exists before remove
Both genpd_debug_add() and genpd_debug_remove() may be called
indirectly by other drivers while genpd_debugfs_dir is not yet
set. For example, drivers can call pm_genpd_init() in probe or
pm_genpd_init() in probe fail/cleanup path:
At this time, genpd_debug_init() may not yet be called.
genpd_debug_add() checks that if genpd_debugfs_dir is NULL, it
will return directly. Make sure this is also checked
in pm_genpd_remove(), otherwise components under debugfs root
which has the same name as other components under pm_genpd may
be accidentally removed, since NULL represents debugfs root.
Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last one for 5.19. This became bigger than wished, but
all changes are pretty device-specific small fixes, which look less
worrisome.
The majority of changes are about various ASoC fixes, while the usual
HD-audio quirks are included as well"
* tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
ALSA: hda/realtek: fix mute/micmute LEDs for HP machines
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
ALSA: hda - Add fixup for Dell Latitidue E5430
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
ALSA: hda/realtek: Fix headset mic for Acer SF313-51
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
ASoC: rt5640: Fix the wrong state of JD1 and JD2
ASoC: Intel: sof_rt5682: fix out-of-bounds array access
ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()
ASoC: tas2764: Fix amp gain register offset & default
ASoC: tas2764: Correct playback volume range
ASoC: tas2764: Fix and extend FSYNC polarity handling
ASoC: tas2764: Add post reset delays
ASoC: dt-bindings: Fix description for msm8916
ASoC: doc: Capitalize RESET line name
ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE
ASoC: cs47l92: Fix event generation for OUT1 demux
...
Werner Sembach [Thu, 7 Jul 2022 18:09:53 +0000 (20:09 +0200)]
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
Taking a recent change in the i8042 quirklist to this one: Clevo
board_names are somewhat unique, and if not: The generic Board_-/Sys_Vendor
string "Notebook" doesn't help much anyway. So identifying the devices just
by the board_name helps keeping the list significantly shorter and might
even hit more devices requiring the fix.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Fixes: c844d22fe0c0 ("ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU") Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Werner Sembach [Thu, 7 Jul 2022 18:09:52 +0000 (20:09 +0200)]
ACPI: video: Force backlight native for some TongFang devices
The TongFang PF5PU1G, PF4NU1F, PF5NU1G, and PF5LUXG/TUXEDO BA15 Gen10,
Pulse 14/15 Gen1, and Pulse 15 Gen2 have the same problem as the Clevo
NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2:
They have a working native and video interface. However the default
detection mechanism first registers the video interface before
unregistering it again and switching to the native interface during boot.
This results in a dangling SBIOS request for backlight change for some
reason, causing the backlight to switch to ~2% once per boot on the first
power cord connect or disconnect event. Setting the native interface
explicitly circumvents this buggy behaviour by avoiding the unregistering
process.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Palmer Dabbelt [Sat, 21 May 2022 19:33:57 +0000 (12:33 -0700)]
RISC-V: Add CONFIG_{NON,}PORTABLE
The RISC-V port has collected a handful of options that are
fundamentally non-portable. To prevent users from shooting themselves
in the foot, hide them all behind a config entry that explicitly calls
out that non-portable binaries may be produced.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for the
combination of a request operation with request flags.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the first two
hib_submit_io() arguments into a single argument.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the last two
o2hb_setup_one_bio() arguments into a single argument.
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-61-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
fs/nilfs2: Use the enum req_op and blk_opf_t types
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the 'mode' and
'mode_flags' arguments of nilfs_btnode_submit_block into a single
argument 'opf'.
Improve static type checking by using enum req_op for request operations.
Rename an 'rw' argument into 'op' since that name is typically used for
request operations. This patch does not change any functionality. Note:
REQ_OP_READ = READ = 0 and REQ_OP_WRITE = WRITE = 1.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-58-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
fs/jbd2: Fix the documentation of the jbd2_write_superblock() callers
Commit 2a222ca992c3 ("fs: have submit_bh users pass in op and flags
separately") renamed the jbd2_write_superblock() 'write_op' argument into
'write_flags'. Propagate this change to the jbd2_write_superblock()
callers. Additionally, change the type of 'write_flags' into blk_opf_t.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
the combination of a request operation and request flags.
fs/hfsplus: Use the enum req_op and blk_opf_t types
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the last two
hfsplus_submit_bio() arguments into a single argument.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the first two
gfs2_submit_bhs() arguments into a single argument.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Reduce the size of struct dio by combining the 'op' and 'op_flags' into
the new 'opf' member. Use the new blk_opf_t type to improve static type
checking. This patch does not change any functionality.
Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-49-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
fs/buffer: Combine two submit_bh() and ll_rw_block() arguments
Both submit_bh() and ll_rw_block() accept a request operation type and
request flags as their first two arguments. Micro-optimize these two
functions by combining these first two arguments into a single argument.
This patch does not change the behavior of any of the modified code.
Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Acked-by: Song Liu <song@kernel.org> (for the md changes) Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for block layer
request flags. Change WRITE into REQ_OP_WRITE. This patch does not change
any functionality since REQ_OP_WRITE == WRITE == 1.
Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-47-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for block
layer request flags.
Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Stefan Roesch <shr@fb.com> Cc: NeilBrown <neilb@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-46-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for arguments and variables that represent
request flags. Use the !! operator in scsi_noretry_cmd() to convert the
blk_opf_t type into a boolean. This patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-42-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
scsi/core: Change the return type of scsi_noretry_cmd() into bool
This patch prepares for introducing the new blk_opf_t type in the SCSI core.
Since the value returned by scsi_noretry_cmd() is only used in boolean
expressions, this patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-41-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for the
combination of a request operation and its flags.
Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-40-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for variables
that represent a request operation combined with request flags. Rename
those variables from 'op' into 'opf'.
nvme/host: Use the enum req_op and blk_opf_t types
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <kbusch@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-38-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
projects / people / ms / linux.git / log
