Ondřej Surý [Wed, 27 May 2020 15:48:39 +0000 (17:48 +0200)]
Reduce the default value for max-stale-ttl from 1 week to 12 hours
Originally, the default value for max-stale-ttl was 1 week, which could
and in some scenarios lead to cache exhaustion on a busy resolvers.
Picking the default value will always be juggling between value that's
useful (e.g. keeping the already cached records after they have already
expired and the upstream name servers are down) and not bloating the
cache too much (e.g. keeping everything for a very long time). The new
default reflects what we think is a reasonable to time to react on both
sides (upstream authoritative and downstream recursive).
Matthijs Mekking [Thu, 14 May 2020 13:36:13 +0000 (15:36 +0200)]
If prepub > retire, prepub now
Catch a case where if the prepublication time of the successor key
is later than the retire time of the predecessor. If that is the
case we should prepublish as soon as possible, a.k.a. now.
Matthijs Mekking [Thu, 14 May 2020 13:34:13 +0000 (15:34 +0200)]
Put new key rollover logic in separate function
The `dns_keymgr_run()` function became quite long, put the logic
that looks if a new key needs to be created (start a key rollover)
in a separate function.
Matthijs Mekking [Thu, 14 May 2020 13:06:54 +0000 (15:06 +0200)]
Fix bug in keymgr_key_has_successor
The logic in `keymgr_key_has_successor(key, keyring)` is flawed, it
returns true if there is any key in the keyring that has a successor,
while what we really want here is to make sure that the given key
has a successor in the given keyring.
Rather than relying on `keymgr_key_exists_with_state`, walk the
list of keys in the keyring and check if the key is a successor of
the given predecessor key.
Matthijs Mekking [Mon, 11 May 2020 13:12:32 +0000 (15:12 +0200)]
Test keytimes on CSK rollover
This improves keytime testing on CSK rollover. It now
tests for specific times, and also tests for SyncPublish and
Removed keytimes.
Since an "active key" for ZSK and KSK means something
different, this makes it tricky to decide when a CSK is
active. An "active key" intuitively means the key is signing
so we say a CSK is active when it is creating zone signatures.
This change means a lot of timings for the CSK rollover tests
need to be adjusted.
The keymgr code needs a slight change on calculating the
prepublication time: For a KSK we need to include the parent
registration delay, but for CSK we look at the zone signing
property and stick with the ZSK prepublication calculation.
This commit adds testing keytiming metadata. In order to facilitate
this, the kasp system test undergoes a few changes:
1. When finding a key file, rather than only saving the key ID,
also save the base filename and creation date with `key_save`.
These can be used later to set expected key times.
2. Add a test function `set_addkeytime` that takes a key, which
keytiming to update, a datetime in keytiming format, and a number
(seconds) to add, and sets the new time in the given keytime
parameter of the given key. This is used to set the expected key
times.
3. Split `check_keys` in `check_keys` and `check_keytimes`. First we
need to find the keyfile before we can check the keytimes.
We need to retrieve the creation date (and sometimes other
keytimes) to determine the other expected key times.
4. Add helper functions to set the expected key times per policy.
This avoids lots of duplication.
Check for keytimes for the first test cases (all that do not cover
rollovers).
Using dnssec-setttime after dnssec-keygen in the kasp system test
can lead to off by one second failures, so reduce the usage of
dnssec-settime in the setup scripts. This commit deals with
setting the key rollover relationship (predecessor/successor).
In the kasp system test, we are going to set the keytimes on
dnssec-keygen so we can test them against the key creation time.
This prevents off by one second in the test, something that can
happen if you set those times with dnssec-settime after
dnssec-keygen.
While kasp relies on key states to determine when a key needs to
be published or be used for signing, the keytimes are used by
operators to get some expectation of key publication and usage.
Update the code such that these keytimes are set appropriately.
That means:
- Print "PublishCDS" and "DeleteCDS" times in the state files.
- The keymgr sets the "Removed" and "PublishCDS" times and derives
those from the dnssec-policy.
- Tweak setting of the "Retired" time, when retiring keys, only
update the time to now when the retire time is not yet set, or is
in the future.
This also fixes a bug in "keymgr_transition_time" where we may wait
too long before zone signatrues become omnipresent or hidden. Not
only can we skip waiting the sign delay Dsgn if there is no
predecessor, we can also skip it if there is no successor.
Finally, this commit moves setting the lifetime, reducing two calls
to one.
For testing purposes mainly, we want to allow set keytimings on
generated keys, such that we don't have to "keygen/settime" which
can result in one second off times.
Michał Kępień [Mon, 25 May 2020 10:49:36 +0000 (12:49 +0200)]
Add Danger Python to GitLab CI
Certain rules of the BIND development process are not codified anywhere
and/or are used inconsistently. In an attempt to improve this
situation, add a GitLab CI job which uses Danger Python to add comments
to merge requests when certain expectations are not met. Two categories
of feedback are used, only one of which - fail() - causes the GitLab CI
job to fail. Exclude dangerfile.py from Python QA checks as the way the
contents of that file are evaluated triggers a lot of Flake8 and PyLint
warnings.
Evan Hunt [Tue, 19 May 2020 01:09:08 +0000 (18:09 -0700)]
pass the nodename to add32() instead of calling dns_rbt_fullnamefromnode()
in addition to being more efficient, this prevents a possible crash by
looking up the node name before the tree sructure can be changed when
cleaning up dead nodes in addrdataset().
Ondřej Surý [Thu, 21 May 2020 09:50:56 +0000 (11:50 +0200)]
Update how we build bind.keys.h (both POSIX and Windows)
The code in util/bindkeys.pl was overly complicated and it could not be
reused on Windows because redirecting stdin and stdout at the same time
from perl is overly complicated.
Now the util/bindkeys.pl accepts the input file as the first and only
argument and prints the header file to stdout. This allows the same
utility to be used from automake and win32/Configure script.
Evan Hunt [Fri, 15 May 2020 23:37:44 +0000 (16:37 -0700)]
add a quick-and-dirty method of debugging a single query
when built with "configure --enable-singletrace", named will produce
detailed query logging at the highest debug level for any query with
query ID zero.
this enables monitoring of the progress of a single query by specifying
the QID using "dig +qid=0". the "client" logging category should be set
to a low severity level to suppress logging of other queries. (the
chance of another query using QID=0 at the same time is only 1 in 2^16.)
"--enable-singletrace" turns on "--enable-querytrace" as well, so if the
logging severity is not lowered, all other queries will be logged
verbosely as well. compiling with either of these options will impair
query performance; they should only be turned on when testing or
troubleshooting.
projects / thirdparty / bind9.git / log
