Guenter Roeck [Thu, 14 May 2026 21:41:00 +0000 (14:41 -0700)]
hwmon: (lm90) Add lock protection to lm90_alert
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem.
Fixes: 7a1d220ccb0cc ("hwmon: (lm90) Introduce function to update configuration register") Reported-by: Sashiko <sashiko-bot@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Guenter Roeck [Thu, 14 May 2026 21:31:49 +0000 (14:31 -0700)]
hwmon: (lm90) Stop work before releasing hwmon device
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed.
Mirror of Mark Brown's ASoC: hdac_hdmi rate-limit patch (commit
[lkml.kernel.org/lkml/2025/6/13/1380]) for the generic snd_parse_eld()
helper used by ASoC hdmi-codec.
When a HDMI sink is disconnected (e.g. a board with two HDMI outputs and
only one cable), userspace audio servers like PipeWire keep probing the
disconnected card and trigger:
HDMI: Unknown ELD version 0
at every probe — easily 30+ messages per burst on rk3588. The same
applies to malformed ELD (MNL out of range). Both conditions are
expected when no sink is attached; rate-limit the dev_info() so the
kernel ring buffer does not fill up.
Dmitry Baryshkov [Sat, 16 May 2026 11:53:45 +0000 (14:53 +0300)]
drm/msm/snapshot: fix dumping of the unaligned regions
The snapshotting code internally aligns data segment to 16 bytes. This
works fine for DPU code (where most of the regions are aligned), but
fails for snapshotting of the DSI data (because DSI data region is
shifted by 4 bytes). Fix the code by removing length alignment and by
accurately printing last registers in the region. While reworking the
code also fix the 16x memory overallocation in
msm_disp_state_dump_regs().
Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reported-by: Salendarsingh Gaud <sgaud@qti.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/725449/
Message-ID: <20260516-msm-fix-dsi-dump-2-v2-1-9e49fb2d240e@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Takashi Iwai [Fri, 15 May 2026 10:56:59 +0000 (12:56 +0200)]
ALSA: hda: Avoid quirk matching with zero PCI SSID
Heiko reported that BIOS on some recent machines doesn't set up PCI
SSID properly but leave with zero (e.g. on HP Dragonfly Folio 13.5
inch G3 with SSID 103c:8a05/8a06), which confuses the quirk table
matching and results in the non-functional state.
Fix it by skipping the PCI SSID matching when either vendor or device
ID is zero and falling back to the codec SSID that is supposed to be
more stable for those cases.
Sergio Boglione [Sat, 16 May 2026 13:16:50 +0000 (10:16 -0300)]
ALSA: hda/realtek: Add quirk for HP 250 G10 (103c:8b34)
HP 250 15.6 inch G10 Notebook PC uses the same ALC236 codec
as the HP 255 15.6 inch G10 (103c:8b2f) and requires the same
fixup to enable the internal speaker EAPD and microphone routing.
Eric Naim [Sat, 16 May 2026 11:15:31 +0000 (19:15 +0800)]
ALSA: hda/realtek: Use ALC287_FIXUP_TXNW2781_I2C for ASUS Strix Gxx5
These devices were incorrectly using the ALC287_FIXUP_TAS2781_I2C quirk
leading to errors:
[ 18.765990] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found
[ 18.768153] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found
[ 18.768476] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found
[ 18.768899] Serial bus multi instantiate pseudo device driver TXNW2781:00: Instantiated 3 I2C devices.
Use the ALC287_FIXUP_TXNW2781_I2C quirk instead to fix this and restore
speaker audio on affected devices.
The VirtIO sound UAPI defines VIRTIO_SND_PCM_RATE_384000, and ALSA
has SNDRV_PCM_RATE_384000. However, virtio-snd's rate conversion
tables stop at 192 kHz.
A device advertising only 384 kHz is rejected as having no supported
PCM frame rates. A device advertising 384 kHz together with lower rates
does not expose 384 kHz through the ALSA hardware constraints. The
selected ALSA rate also needs a reverse mapping for SET_PARAMS.
Add the missing 384 kHz entries to both conversion tables.
Takashi Iwai [Fri, 15 May 2026 08:55:58 +0000 (10:55 +0200)]
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it.
Haoze Xie [Fri, 15 May 2026 03:19:02 +0000 (11:19 +0800)]
netfilter: nf_queue: hold bridge skb->dev while queued
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling.
Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Lorenzo Bianconi [Thu, 14 May 2026 14:46:38 +0000 (16:46 +0200)]
netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge()
neigh_hh_bridge() assumes the skb always has sufficient headroom to copy
the aligned L2 header. This assumption can trigger the crash reported
below using the following netfilter setup:
Fix the issue reallocating the skb headroom if necessary in neigh_hh_bridge routine.
Fixes: e179e6322ac33 ("netfilter: bridge-netfilter: Fix MAC header handling with IP DNAT") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Thu, 14 May 2026 08:55:13 +0000 (10:55 +0200)]
netfilter: ipset: annotate "pos" for concurrent readers/writers
The "pos" structure member of struct hbucket stores the first
free slot in the hash bucket of a hash type of set and there
are concurrent readers/writers. Annotate accesses properly.
Fixes: 18f84d41d34f ("netfilter: ipset: Introduce RCU locking in hash:* types") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: ipset: Fix data race between add and dump in all hash types
When adding a new entry to the next position in the existing hash bucket,
the position index was incremented too early and parallel dump could
read it before the entry was populated with the value. Move the setting
of the position index after populating the entry.
v2: Position counting fixed, noticed by Florian Westphal.
Jozsef Kadlecsik [Thu, 14 May 2026 08:55:11 +0000 (10:55 +0200)]
netfilter: ipset: Fix data race between add and list header in all hash types
The "ipset list -terse" command is actually a dump operation which
may run parallel with "ipset add" commands, which can trigger an
internal resizing of the hash type of sets just being dumped. However,
dumping just the header part of the set was not protected against
underlying resizing. Fix it by protecting the header dumping part
as well.
Fixes: c4c997839cf9 ("netfilter: ipset: Fix parallel resizing and listing of the same set") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary.
Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Nan Li <tonanli66@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stepan Ionichev [Mon, 11 May 2026 06:40:20 +0000 (11:40 +0500)]
iio: gyro: bmg160: wait full startup time after mode change at probe
bmg160_chip_init() calls bmg160_set_mode(BMG160_MODE_NORMAL) and
then waits only 500-1000 us. Per the BMG160 datasheet
(BST-BMG160-DS000-07 Rev. 1.0, May 2013), the start-up and wake-up
times (tsu, twusm) are 30 ms.
The same file already waits BMG160_MAX_STARTUP_TIME_MS (80 ms)
in bmg160_runtime_resume() after the same set_mode(NORMAL)
operation. The 500 us value at probe was likely a unit mix-up;
the old comment said "500 ms" while the code used microseconds.
Reuse the same constant via msleep() and add a code comment
explaining the datasheet basis for the wait. Without this,
register writes that follow the mode change can hit the chip
before it is ready.
Stepan Ionichev [Sun, 10 May 2026 02:35:00 +0000 (07:35 +0500)]
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry
matching the bw_bits value read from the chip:
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
break;
}
*val = bmg160_samp_freq_table[i].filter;
If no entry matches, i ends up equal to the array size and the next line
reads one slot past the end. bmg160_set_filter() has the same shape, driven
by 'val' instead of bw_bits.
The set_filter() path is reachable from userspace via the sysfs
in_anglvel_filter_low_pass_3db_frequency interface, so userspace can
trivially trigger the out-of-bounds read with a value that is not in
bmg160_samp_freq_table[].filter.
Fixes: 22b46c45fb9b ("iio:gyro:bmg160 Gyro Sensor driver") Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
bmp580_trigger_handler() builds an on-stack scan buffer containing
two __le32 fields and an aligned_s64 timestamp, and pushes it to
userspace via iio_push_to_buffers_with_ts(). However, only the low
3 bytes of each __le32 field are populated by the device data:
The high byte of each field is left uninitialised on the stack.
The bmp580 channels declare storagebits = 32, so the IIO core
transports all four bytes per sample to userspace as part of the
scan element, leaking two bytes of kernel stack per scan.
Zero-initialise the buffer before populating it, mirroring the fix
applied to bme280_trigger_handler() in commit 018f50909e66 ("iio:
bmp280: zero-init buffer").
Fixes: 872c8014e05e ("iio: pressure: bmp280: drop sensor_data array") Cc: stable@vger.kernel.org Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Yizhou Zhao [Mon, 11 May 2026 17:30:41 +0000 (01:30 +0800)]
netfilter: nft_inner: Fix IPv6 inner_thoff desync
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization.
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Assisted-by: GLM:5.1 Z.ai Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Thu, 14 May 2026 08:55:10 +0000 (10:55 +0200)]
netfilter: ipset: fix a potential dump-destroy race
When dumping sets in order to create the proper order for restore,
the list type of sets dumped last. Therefore internally we run the
dumping loop twice: first with all non-list type of sets and skipping
the list type ones and then secondly for the list type of sets.
Sashiko noticed that there's a potential race between dump and destroy
if in the first loop the last set was a list type of set: its pointer
remains unreferenced and a concurrent destroy can free it.
Fix the issue by resetting the variable holding the pointer.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Julian Anastasov [Sun, 10 May 2026 10:46:05 +0000 (13:46 +0300)]
ipvs: avoid possible loop in ip_vs_dst_event on resizing
Sashiko points out that unprivileged user can frequently
call ip_vs_flush() or ip_vs_del_service() to trigger
svc_table_changes updates that can lead to infinite loop
in ip_vs_dst_event(). This can also happen if the user
triggers frequent table resizing without deleting all
services. We should also consider the possible effects
if the user triggers many NETDEV_DOWN events.
One way to solve it is to hold svc_resize_sem in
ip_vs_dst_event() but this can block the dev notifier
during the whole resizing process.
Instead, use new rw_semaphore svc_replace_sem to protect just
the svc_table replacement which is a short code section.
Then hold svc_replace_sem in ip_vs_dst_event() to serialize
with replacing the svc_table. As result, loop is avoided
as there is no need to repeat the table walking from the
start. By this way changes in svc_table_changes can happen
only when all services are removed and all dev references
dropped which allows us to abort the table walking.
As IP_VS_WORK_SVC_NORESIZE is the flag used to stop the
svc_resize_work under service_mutex, we should check only
this flag often but not while under service_mutex.
To remove the mutex_trylock() for service_mutex in the
second phase where the resizer installs the new table
after rehashing, we will avoid holding the service_mutex
there. As result, the code in configuration context which
is under service_mutex should access ipvs->svc_table under
RCU because it can be replaced at anytime and released
after a RCU grace period. As for ip_vs_zero_all(), it needs
different solution as a table walker which can escape
single RCU read-side critical section: to hold the
svc_replace_sem to prevent table to be replaced.
In ip_vs_status_show() prefer to hold svc_replace_sem
to avoid many loops, just detect if the svc_table is
removed.
Prefer the newly attached table for the u_thresh/l_thresh
checks to know when to grow/shrink while adding or deleting
services because the new table size is based on the latest
parameters.
Jani Nikula [Wed, 13 May 2026 16:13:29 +0000 (19:13 +0300)]
drm/i915/irq: add platform specific display irq handler functions
Add a number of *_display_irq_handler() functions to group together the
various display irq handler parts for the platforms, to declutter the
core i915 irq code from the details.
Add master_ctl to struct intel_display_irq_state, and pass the state
pointer to the handlers where necessary. The handler function signatures
are intentionally the same to allow for more refactoring.
Jani Nikula [Wed, 13 May 2026 16:13:28 +0000 (19:13 +0300)]
drm/i915/irq: add platform specific display irq ack functions
Add i9xx_display_irq_ack() and vlv_display_irq_ack() to group together
the various irq ack parts for the platforms, to declutter the core i915
irq code from the details.
Introduce struct intel_display_irq_state to group together all the data
the ack functions need. In the follow-up, this state will be passed on
to similar platform specific handler functions.
Jani Nikula [Wed, 13 May 2026 16:13:26 +0000 (19:13 +0300)]
drm/i915/irq: add display irq funcs, start with intel_display_irq_reset()
Introduce display irq hooks with struct intel_display_irq_funcs, and add
the ->reset hook as the first thing. Call the reset hooks from i915 and
xe core via intel_display_irq_reset().
Relocate the gen8 and gen11 HAS_DISPLAY() check to
intel_display_irq_reset(), as the funcs pointer won't be initialized for
no display.
Note: We're increasingly moving to the territory of not touching display
at all if there's no display or it has been fused off. Which is good,
but care must be taken to not have hardware setup required also for no
display cases in display code. Also note that the line is fuzzy for
older platforms, but there we also don't have fusing.
v2:
- make the structs static const (Sashiko)
- relocate HAS_DISPLAY() (Sashiko)
Jani Nikula [Wed, 13 May 2026 16:13:24 +0000 (19:13 +0300)]
drm/i915/irq: deduplicate dg1_de_irq_postinstall() and gen11_de_irq_postinstall()
dg1_de_irq_postinstall() and gen11_de_irq_postinstall() are exactly the
same. Remove dg1_de_irq_postinstall() and call
gen11_de_irq_postinstall() instead.
xfrm: ah: use skb_to_full_sk in async output callbacks
When AH output is offloaded to an asynchronous crypto provider
(hardware accelerators such as AMD CCP, or a forced-async software
shim used for testing), the digest completion fires
ah_output_done() / ah6_output_done() on a workqueue. The egress
skb at that point may have been originated by a TCP listener
sending a SYN-ACK, which sets skb->sk to a request_sock via
skb_set_owner_edemux(); it may also have been originated by an
inet_timewait_sock retransmit. Neither is a full struct sock, and
passing the raw skb->sk to xfrm_output_resume() then forwards a
non-full socket through the rest of the xfrm output chain.
xfrm_output_resume() and its downstream consumers expect a full
sk where they dereference at all. The natural egress path
through ah_output_done() does not crash today because the
consumers that read past sock_common are either gated by
sk_fullsock() or short-circuit on flags that are clear on a fresh
request_sock; an exhaustive walk of the 50 most plausible
consumers under sch_fq, dev_queue_xmit, netfilter, tc-egress and
cgroup-egress BPF found no current unguarded deref. The bug is
still a real type confusion that future consumer changes could
turn into a memory-corruption primitive.
This is the same bug class fixed for ESP in commit 1620c88887b1
("xfrm: Fix the usage of skb->sk"). Apply the analogous fix to
AH: convert skb->sk to a full socket pointer (or NULL) via
skb_to_full_sk() before handing it to xfrm_output_resume().
The same async AH callbacks were touched recently for an
independent ESN-related ICV layout bug in commit ec54093e6a8f
("xfrm: ah: account for ESN high bits in async callbacks"); the
sk type-confusion addressed here is orthogonal. This patch is
part of an ongoing audit of the AH callback paths; an ah_output
ihl-validation hardening series is also currently under review on
netdev.
Reproduced under UML + KASAN + lockdep with a forced-async
hmac(sha1) shim that registers at priority 9999 and wraps the
sync in-tree hmac-sha1-lib. With the shim loaded, ah_output_done
runs on every SYN-ACK egress through a transport-mode AH SA and
skb->sk arrives as a request_sock (TCP_NEW_SYN_RECV); after this
patch, xfrm_output_resume() receives the listener (the result of
sk_to_full_sk()) and consumer derefs land on full-sock fields as
intended.
Fixes: 9ab1265d5231 ("xfrm: Use actual socket sk instead of skb socket for xfrm_output_resume") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Jani Nikula [Fri, 15 May 2026 16:09:20 +0000 (19:09 +0300)]
drm/xe/display: fix oops in suspend/shutdown without display
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b95
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display
suspend/resume work on discrete").
Jasper Smet [Wed, 13 May 2026 05:21:37 +0000 (07:21 +0200)]
ASoC: amd: acp: Add DMI quirk for ASUS Zenbook S16 UM5606GA
The ASUS Zenbook S16 (UM5606GA) with AMD Ryzen AI 9 465 (Strix Point,
ACP 7.0) has a BIOS that incorrectly sets the ACPI property
'acp-audio-config-flag' to 0x10 (FLAG_AMD_LEGACY_ONLY_DMIC) for the ACP
device. This prevents snd_pci_ps from probing the SoundWire bus, resulting
in no internal audio (dummy output only).
The hardware uses a Cirrus Logic CS42L43 (headphone/jack) and four CS35L56
smart amplifiers (speakers), all on SoundWire link 1. The corresponding
machine table entry (acp70_cs42l43_l1u0_cs35l56x4_l1u0123) already exists
in amd-acp70-acpi-match.c and correctly describes this topology.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Felix Gu [Sat, 9 May 2026 17:55:37 +0000 (01:55 +0800)]
spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache()
When DMA read times out in mtk_snand_read_page_cache(), the original code
erroneously jumped to cleanup label which skips DMA unmapping and ECC
disable, causing a resource leak.
Cássio Gabriel [Mon, 11 May 2026 16:42:02 +0000 (13:42 -0300)]
ASoC: amd: acp-sdw-legacy: check CPU DAI name before logging
devm_kasprintf() can fail and return NULL. The legacy AMD SoundWire
machine driver logs cpus->dai_name before checking the allocation result.
Move the debug print after the NULL check, matching the ordering used by
the SOF AMD SoundWire path after commit 5726b68473f7 ("ASoC: amd/sdw_utils:
avoid NULL deref when devm_kasprintf() fails").
Felix Gu [Thu, 7 May 2026 14:06:36 +0000 (22:06 +0800)]
spi: rspi: Simplify reset control handling
Use devm_reset_control_get_optional_exclusive_deasserted() to combine
get + deassert + cleanup in a single call, removing the redundant
rspi_reset_control_assert() helper.
ASoC: qcom: q6apm-dai: Allocate an extra page for PCM buffers
Some Old DSP firmware versions use 32-bit address arithmetic and size for
validating the PCM buffer address range. If a buffer is allocated near
the top of the 32-bit address space, arithmetic calculations involving
the end address can overflow and fail checks.
Work around this by increasing the preallocated PCM buffer size by one
page. The DSP is still passed the usable buffer size, excluding the extra
page, which prevents the firmware from seeing an end address that crosses
the 32-bit boundary.
This was not hit before because PCM buffer allocation and DSP-side
mapping happened at different points, and the size mapped on the DSP was
usually nperiods * period_size. Therefore the mapped size was unlikely to
match the full preallocated buffer size exactly, although the issue was
still possible. With early buffer mapping on the DSP, the full
preallocated buffer is mapped during PCM creation, making the failure
reproducible at boot.
Fixes: 8ea6e25c8536 ("ASoC: qcom: q6apm: Add support for early buffer mapping on DSP") Cc: Stable@vger.kernel.org Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Closes: https://lore.kernel.org/all/7f10abbd-fb78-4c3a-ab90-7ca78239891a@oldschoolsolutions.biz/ Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Link: https://patch.msgid.link/20260514090607.2435484-1-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
Iker Pedrosa [Fri, 15 May 2026 10:49:01 +0000 (12:49 +0200)]
riscv: dts: spacemit: k1-bananapi-f3: add SD card support with UHS modes
Add complete SD card controller support with UHS high-speed modes.
- Enable sdhci0 controller with 4-bit bus width
- Configure card detect GPIO with GPIO_ACTIVE_LOW and internal pull-up
support
- Connect vmmc-supply to buck4 for 3.3V card power
- Connect vqmmc-supply to aldo1 for 1.8V/3.3V I/O switching
- Add dual pinctrl states for voltage-dependent pin configuration
- Support UHS-I SDR25, SDR50, and SDR104 modes
- Add stable MMC device aliases (mmc0 = eMMC, mmc1 = SD card)
This enables full SD card functionality including high-speed UHS modes
for improved performance.
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu().
Linmao Li [Wed, 13 May 2026 02:55:09 +0000 (10:55 +0800)]
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released.
Fixes: c15b1ccadb32 ("ipv6: move DAD and addrconf_verify processing to workqueue") Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260513025509.3776405-1-lilinmao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Boris Burkov [Tue, 12 May 2026 16:55:28 +0000 (09:55 -0700)]
btrfs: swallow btrfs_record_squota_delta() ENOENT
I thought that it was likely I could harden squota deletion to the point
that it was impossible to end up with an extent accounted to a qgroup
outliving its qgroup. Several recent bugs have made me re-consider that
position.
Ultimately, this is a tradeoff between short term stability and long
term strictness, but I think given that there could be another layer of
bugs behind the 2-3 I just fixed, I would feel much more confident in
people using squotas if the risk was "your values can get a bit out of
whack which you can fix by deleting stuff or
disabling/re-enabling/repairing" vs "it will abort your filesystem".
As the final nail in the coffin, the Meta production kernel was lacking
earlier fixes from me and Qu regarding subvol qgroup lifetime, so this
is what we have been testing at scale, so I think at least for now
upstream should have the same extra layer of protection.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Mon, 11 May 2026 20:06:24 +0000 (13:06 -0700)]
btrfs: clamp to avoid squota underflow
Simple quota accounting can undercount metadata tree block allocations
in certain scenarios. When an undercounted subvolume is deleted and its
tree blocks freed, the free deltas decrement rfer/excl past zero,
wrapping the u64 to a value near U64_MAX.
Once wrapped, can_delete_squota_qgroup() sees non-zero rfer and refuses
to delete the qgroup. The qgroup becomes permanently orphaned in the
quota tree, since there is no subvolume left to generate frees that
would bring the counter back to zero.
While we ultimately want to fix any mis-accounting at the source, it is
also helpful and worthwhile to mitigate the damage by clamping rfer and
excl to zero on underflow rather than allowing the u64 to wrap. This at
least allows us to clean up the messed up qgroups on subvol deletion.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Tue, 12 May 2026 02:53:46 +0000 (19:53 -0700)]
btrfs: fix squota accounting during enable generation
The first transaction that enables squotas is special and a bit tricky.
We have to set BTRFS_FS_QUOTA_ENABLED after the transaction to avoid a
deadlock, so any delayed refs that run before we set the bit are not
squota accounted. For data this is fine, we don't get an owner_ref, so
there is no real harm, it's as if the extent predated squotas. However
for metadata, the tree block will have gen == enable_gen so when we free
it later, we will decrement the squota accounting, which can result in
an underflow. Before it is freed, btrfs check shows errors, as we have
mismatched usage between the node generations/owners and the squota
values.
There are two angles to this fix:
1. For extents that come in delayed_refs that run during the
enable_gen transaction, we must actually set enable_gen to the *next*
transaction. That is the first transaction that we can really
properly account in any way.
2. For extents that come in between the end of our transaction handle
and the time we set the BTRFS_FS_QUOTA_ENABLED bit, we need an
additional bit, BTRFS_FS_SQUOTA_ENABLING which only affects recording
squota deltas, so we do pick up those extents. Otherwise, we would
miss them, even for enable_gen + 1.
Fixes: bd7c1ea3a302 ("btrfs: qgroup: check generation when recording simple quota delta") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Mon, 11 May 2026 20:07:11 +0000 (13:07 -0700)]
btrfs: check for subvolume before deleting squota qgroup
The invariant that we want to maintain with subvolume qgroups is that
the qgroup can only be deleted if there is no root. With squotas, we
thought that it was sufficient to just check the usage, because we
assumed that deleting a subvolume will drive it's qgroups usage to 0,
and thus 0 usage implies no subvolume.
However, this is false, for two reasons:
- A subvol whose extents are all from before squotas was enabled.
- A subvol that was created in this transaction and for which we have
not yet run any delayed refs.
In both cases, deleting the qgroup breaks the desired invariant and we
are left with a subvolume with no qgroup but squotas are enabled.
Fix this by unifying the deletion check logic between full qgroups and
squotas. Squotas do all the same checks *and* the additional usage == 0
check, which is the one extra rule peculiar to squotas.
Link: https://lore.kernel.org/linux-btrfs/adnBhWfJQ1n3hZC8@merlins.org/ Fixes: a8df35619948 ("btrfs: forbid deleting live subvol qgroup") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Fri, 8 May 2026 20:11:26 +0000 (13:11 -0700)]
btrfs: always drop root->inodes lock before cond_resched()
find_first_inode() and find_first_inode_to_shrink() lock root->inodes,
then loop over them, occasionally skipping some inodes. When they skip
an inode, they attempt to share the cpu/lock with cond_resched_lock().
However, that has a subtle problem associated with it.
cond_resched_lock() only drops the lock if it needs to actually call
schedule(). With CONFIG_PREEMPT_NONE, this means the full timeslice as
detected at ticks. With 8+ cpus and default tunables, this is 2.8ms. So
regardless of HZ, we will run for at least 2.8ms in this loop without
dropping the lock, assuming it finds no suitable inodes. If HZ is
small enough, it might be even worse as the tick granularity becomes
bigger than the timeslice.
The knock-on effect of this is that callers to
btrfs_del_inode_from_root() like kswapd trying to shrink the inode slab
or userspace threads calling evict() will spin on xa_lock(&root->inodes)
for 2.8ms, so the extent map shrinker dominates the lock even though
ostensibly it is intending to share it. This produces memory pressure as
there is only one kswapd and it runs sequentially so it can get stuck in
the inode slab shrinking.
To fix it, simply replace cond_resched_lock() with an open coded variant
which unconditionally does unlock/lock around cond_resched. Sharing the
lock is decoupled from sharing the CPU, and all the users of the lock
now share it fairly.
I was able to reproduce this on test systems by producing a lot of empty
files (to make a big root->inodes xarray), then producing memory
pressure by reading large files larger than ram, triggering kswapd and
the extent_map shrinker. The lock contention is visible with perf or
lockstat. This patch also relieved a user-apparent bottleneck on a
production system from the original report.
Tested-by: Rik van Riel <riel@surriel.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
Robbie Ko [Fri, 8 May 2026 13:42:11 +0000 (21:42 +0800)]
btrfs: mark file extent range dirty after converting prealloc extents
When writing into a preallocated extent, ordered extent completion calls
btrfs_mark_extent_written() to convert the file extent item from the
BTRFS_FILE_EXTENT_PREALLOC type to the BTRFS_FILE_EXTENT_REG type.
If the preallocated extent was created beyond i_size with fallocate
keep-size, and the inode is evicted and loaded again before the write,
the inode's file_extent_tree is initialized only up to i_size.
The beyond i_size prealloc extent is therefore not tracked there.
After a write into that extent extends i_size, btrfs_mark_extent_written()
updates the file extent item, but the corresponding range is not marked
dirty in the inode's file_extent_tree.
This can leave disk_i_size stale when the filesystem does not use the
no-holes feature, so after remount the file size can go back to the old
value.
The following reproducer triggers the problem:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file
fallocate -n -l 2M $MNT/file
umount $MNT
mount $DEV $MNT
dd if=/dev/zero of=$MNT/file bs=1M count=1 conv=notrunc
ls -lh $MNT/file
umount $MNT
mount $DEV $MNT
ls -lh $MNT/file
umount $MNT
Running the reproducer gives the following result:
Fix this by marking the written range dirty in the inode's
file_extent_tree after successfully converting the prealloc extent to a
regular extent.
Fixes: 9ddc959e802b ("btrfs: use the file extent tree infrastructure") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Robbie Ko <robbieko@synology.com>
[ Minor change log updates ] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Avinash Duduskar [Wed, 13 May 2026 09:22:53 +0000 (14:52 +0530)]
llc: avoid sparse cast-truncates warning in counter clamps
llc_conn_ac_inc_npta_value() and llc_conn_ac_inc_tx_win_size()
clamp their counters to the maximum valid 7-bit value via
(u8) ~LLC_2_SEQ_NBR_MODULO. LLC_2_SEQ_NBR_MODULO is defined as
((u8) 128) in include/net/llc_pdu.h, but the (u8) cast does not
prevent integer promotion of the operand of ~: ~128 is computed
as int (0xffffff7f), and the surrounding (u8) cast truncates
back to 0x7f. The result is correct (127), but the implicit
truncation is flagged by sparse:
net/llc/llc_c_ac.c:1008:38: warning: cast truncates bits from
constant value (ffffff7f becomes 7f)
(and three more at lines 1009, 1099, 1100)
Replace the (u8) ~LLC_2_SEQ_NBR_MODULO expression with
LLC_2_SEQ_NBR_MODULO - 1, which evaluates to 127 directly and
silences sparse.
The same ~LLC_2_SEQ_NBR_MODULO pattern also appears in
include/net/llc_pdu.h:148 as part of PDU_GET_NEXT_Vr, but there
the result is immediately &-masked, so the int promotion is
harmless and sparse does not flag it; it is left alone.
This patch is the minimum diff to silence the warning. The
counter-clamp idiom itself could be modernized to
min_t(u8, ..., LLC_2_SEQ_NBR_MODULO - 1), but that is a
separate cleanup left for another patch.
Eric Dumazet [Thu, 14 May 2026 09:55:06 +0000 (09:55 +0000)]
net: always declare __sock_wfree() and tcp_wfree()
Even if guarded by IS_ENABLED(CONFIG_INET) compilers need to know
what __sock_wfree() and tcp_wfree() are:
include/net/sock.h:1861:63: note: each undeclared identifier is reported only once for each function it appears in
include/net/sock.h:1862:63: error: 'tcp_wfree' undeclared (first use in this function); did you mean 'sock_wfree'?
1862 | (IS_ENABLED(CONFIG_INET) && skb->destructor == tcp_wfree);
Fixes: f0de88303d5e ("net: make is_skb_wmem() available to modules") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202605141607.mDXnYFKY-lkp@intel.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260514095506.3919094-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Closes: https://sashiko.dev/#/patchset/20260420132051.217589-1-sgarzare%40redhat.com Reported-by: Maher Azzouzi <maherazz04@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Link: https://patch.msgid.link/20260514092948.268720-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luka Gejak [Wed, 13 May 2026 18:26:57 +0000 (20:26 +0200)]
net: hsr: reject unresolved interlink ifindex
In hsr_newlink(), a provided but invalid IFLA_HSR_INTERLINK attribute
was silently ignored if __dev_get_by_index() returned NULL. This leads
to incorrect RedBox topology creation without notifying the user.
Fix this by returning -EINVAL and an extack message when the
interlink attribute is present but cannot be resolved.
Reviewed-by: Felix Maurer <fmaurer@redhat.com> Signed-off-by: Luka Gejak <luka.gejak@linux.dev> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Link: https://patch.msgid.link/20260513182657.20346-3-luka.gejak@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sam Daly [Wed, 13 May 2026 16:42:53 +0000 (18:42 +0200)]
octeontx2-af: CGX: add bounds check to cgx_speed_mbps index
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range.
Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs") Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Linu Cherian <lcherian@marvell.com> Cc: Geetha sowjanya <gakula@marvell.com> Cc: hariprasad <hkelam@marvell.com> Cc: Subbaraya Sundeep <sbhatta@marvell.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: stable <stable@kernel.org> Signed-off-by: Sam Daly <sam@samdaly.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea [Wed, 13 May 2026 12:45:18 +0000 (15:45 +0300)]
IB/IPoIB: ndo_set_rx_mode_async conversion
The commit in the fixes tag added a warning for devices
that are netdev ops locked that they should be converted
to .ndo_set_rx_mode_async. IPoIB for mlx5 is such a
driver which was missed during the conversion because the
flow is more complex:
- mlx5 part of IPoIB device was converted to ops-lock in commit [1].
- ipoib_intf_init() then overrides netdev_ops with
ipoib_netdev_ops_{pf,vf}, which still wired ndo_set_rx_mode to the
legacy sync path -- tripping the new warning on every probe.
So now we have the following splat:
netdevice: ib0 (uninitialized): ops-locked drivers should use ndo_set_rx_mode_async
WARNING: net/core/dev.c:11366 at register_netdevice+0x83c/0x21d0
...
register_netdev+0x1f/0x40
ipoib_add_one+0x35c/0x880 [ib_ipoib]
This patch implements .ndo_set_rx_mode_async but it simply schedules the
multicast restart task like before. This is done to maintain the
assumption that this task and others [2] must run on the same order
workqueue to avoid racing with themselves. The race between
ipoib_mcast_join_task() and ipoib_mcast_restart_task() would be the most
obvious example.
Linus Torvalds [Sat, 16 May 2026 00:00:45 +0000 (17:00 -0700)]
Merge tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, small and all over fixes, mostly xe and amdgpu,
with some ttm and a core fix for the handle change pain.
core:
- fix for the fix for the handle change race
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly"
* tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm: Replace old pointer to new idr
drm/loongson: Use managed KMS polling
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
drm/ttm: Convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
drm/gma500/oaktrail_lvds: fix i2c adapter leaks on init
drm/gma500/oaktrail_lvds: fix hang on init failure
drm/gma500/oaktrail_hdmi: fix i2c adapter leak on setup
drm/xe: Drop unused ggtt_balloon field
accel/qaic: Add overflow check to remap_pfn_range during mmap
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
drm/i915: skip __i915_request_skip() for already signaled requests
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
drm/amdgpu/gfx_v12_0: set gfx.rs64_enable from PFP header on GFX12
drm/amd/ras: Fix CPER ring debugfs read overflow
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
drm/amdgpu: fix userq hang detection and reset
drm/amdgpu: remove almost all calls to amdgpu_userq_detect_and_reset_queues
drm/amdgpu: rework amdgpu_userq_signal_ioctl v3
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
drm/xe/dma-buf: fix UAF with retry loop
...
Commit 5e28b7b94408 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013 Cc: stable@vger.kernel.org Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com
The unfortunately named 'phandle-array' property type is really a matrix
with phandle and fixed arg cells entries. A matrix property should have 2
levels of items constraints.
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.
Update the docs to match the code (include/linux/netlink.h):
/*
* skb should fit one page. This choice is good for headerless malloc.
* But we should limit to 8K so that userspace does not have to
* use enormous buffer sizes on recvmsg() calls just to avoid
* MSG_TRUNC when PAGE_SIZE is very large.
*/
#if PAGE_SIZE < 8192UL
#define NLMSG_GOODSIZE SKB_WITH_OVERHEAD(PAGE_SIZE)
#else
#define NLMSG_GOODSIZE SKB_WITH_OVERHEAD(8192UL)
#endif
Linus Torvalds [Fri, 15 May 2026 22:40:25 +0000 (15:40 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 MPAM fixes from Catalin Marinas:
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Check whether the config array is allocated before destroying it
arm_mpam: Fix false positive assert failure during mpam_disable()
arm_mpam: Improve check for whether or not NRDY is hardware managed
arm_mpam: Pretend that NRDY is always hardware managed
arm_mpam: Fix monitor instance selection when checking for hardware NRDY
Linus Torvalds [Fri, 15 May 2026 22:22:26 +0000 (15:22 -0700)]
Merge tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"This is probably the largest fixes pull-request ever sent for IOMMU. I
partially blame it on AI code review which found some issues but there
is also some rework in here to fix issues in the iommu parts of PCI
device reset.
AMD-Vi:
- Add bounds checks to debugfs and table lookups
Intel VT-d:
- Apply an existing quirk for Q35 graphic device
- Skip dev_pasid teardown for the blocked domain to avoid
out-of-bounds access
- Return early if dev_pasid is missing to prevent NULL dereference
or UAF
Core:
- Fix bugs and corner cases in pci_dev_reset_iommu_prepare/done()
- Fix various issues found by AI in iommupt code
MAINTAINERS email address update for RISCV IOMMU"
* tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: update Tomasz Jeznach's email address
iommupt: Fix the end_index calculation in __map_range_leaf()
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
iommu: Handle unmap error when iommu_debug is enabled
iommu: Fix up map/unmap debugging for iommupt domains
iommu: Fix loss of errno on map failure for classic ops
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
iommu/vt-d: Fix oops due to out of scope access
iommu/vt-d: Disable DMAR for Intel Q35 IGFX
iommu: Warn on premature unblock during DMA aliased sibling reset
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid()
iommu: Fix nested pci_dev_reset_iommu_prepare/done()
iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done()
iommu: Replace per-group resetting_domain with per-gdev blocked flag
iommu: Fix kdocs of pci_dev_reset_iommu_done()
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
Linus Torvalds [Fri, 15 May 2026 22:13:02 +0000 (15:13 -0700)]
Merge tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf (Alex Williamson)
* tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check BAR resources before exporting a DMABUF
vfio/pci: Set up BAR resources and maps in vfio_pci_core_enable()
vfio/pci: Make VFIO_PCI_OFFSET_TO_INDEX() return unsigned
vfio/pci: fix dma-buf kref underflow after revoke
Linus Torvalds [Fri, 15 May 2026 21:52:17 +0000 (14:52 -0700)]
Merge tag 'v7.1-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix integer overflow in read
- Fix smbdirect error cleanup
- Multichannel reconnect fix
- Add some missing defines and correct some references to protocol spec
- Fix oob symlink read
* tag 'v7.1-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smbdirect: Fix error cleanup in smbdirect_map_sges_from_iter()
smb: client: avoid integer overflow in SMB2 READ length check
cifs: client: stage smb3_reconfigure() updates and restore ctx on failure
smb/client: fix possible infinite loop and oob read in symlink_data()
SMB3.1.1: add missing QUERY_DIR info levels
Jakub Sitnicki [Mon, 11 May 2026 12:10:22 +0000 (14:10 +0200)]
bpf: Add Jiayuan Chen to sockmap maintainers
Nominate Jiayuan Chen for the sockmap co-maintainer. Jiayuan has been a
regular contributor and reviewer for the sockmap and networking code.
Since we are now down to just two maintainers, and John has to split his
time between BPF core, BPF networking, and sockmap, having three
maintainers again will help with the review load.
Linus Torvalds [Fri, 15 May 2026 21:48:09 +0000 (14:48 -0700)]
Merge tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"An important patch from Hristo that squashes a folio reference leak
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava.
All but two are marked for stable"
* tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential null-ptr-deref in decode_choose_args()
libceph: handle rbtree insertion error in decode_choose_args()
libceph: Fix potential out-of-bounds access in osdmap_decode()
ceph: put folios not suitable for writeback
ceph: add ceph_has_realms_with_quotas() check to ceph_quota_update_statfs()
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
ceph: fix a buffer leak in __ceph_setxattr()
libceph: Fix unnecessarily high ceph_decode_need() for uniform bucket
libceph: Fix potential out-of-bounds access in crush_decode()
Gustavo Sousa [Thu, 14 May 2026 21:44:50 +0000 (18:44 -0300)]
drm/xe/reg_sr: Do sanity check for MCR vs non-MCR
The type struct xe_reg_mcr exists to ensure that the correct API is used
when handling MCR registers. However, for the register save/restore
functionality, the RTP processing always cast the register to a struct
xe_reg and then apply_one_mmio() selects the MMIO API based on the "mcr"
field of the register instance.
This allows the developer to commit mistakes like passing a MCR register
for an RTP action for a GT where the respective register is not MCR; and
vice-versa.
To capture such scenarios, do a sanity check in xe_reg_sr_add() that,
upon an inconsistency:
- "fixes" the register type by favoring what we have in our MCR range
tables instead of what the developer selected for the save/restore
entry;
- raises a notice-level message to inform about the inconsistency.
Note: As a collateral of this change, we need to include MCR
initialization in xe_wa_test.c, otherwise a bunch of test cases end up
failing because xe_gt_mcr_check_reg() will always return false, meaning
that will incorrectly say that a MCR register is not MCR.
v2:
- Downgrade messages to notice level so as not to block CI execution
when inconsistencies are found. (Matt)
- Add missing EXPORT_SYMBOL_IF_KUNIT() calls. (Gustavo)
Gustavo Sousa [Thu, 14 May 2026 21:44:49 +0000 (18:44 -0300)]
drm/xe/mcr: Extract reg_in_steering_type_ranges()
The logic to check if a register falls within one of the ranges for a
steering type is already duplicated in
xe_gt_mcr_get_nonterminated_steering(). We will also want to use that
same logic in another upcoming function. Let's factor out that logic
and put it into a function named reg_in_steering_type_ranges().
Gustavo Sousa [Thu, 14 May 2026 21:44:47 +0000 (18:44 -0300)]
drm/xe: Extract xe_hw_engine_setup_reg_lrc()
The steps for processing RTP rules that build up an engine's reg_lrc
arguably belongs to xe_hw_engine.c and should be encapsulated into a
function in that unit.
Move that logic to a new function called xe_hw_engine_setup_reg_lrc().
Gustavo Sousa [Thu, 14 May 2026 21:44:46 +0000 (18:44 -0300)]
drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN4
The register COMMON_SLICE_CHICKEN4 is a MCR register on both Xe2 and
Xe3. Let's make sure to define a MCR version of it and use it for the
relevant IP versions.
Use XEHP_ as prefix for the register name, since it is MCR as of Xe_HP.
v2:
- Also change for one entry in lrc_tunnings, which was caught by
manual testing and add corresponging Fixes tag in commit message.
(Gustavo)
Fixes: 8d6f16f1f082 ("drm/xe: Extend Wa_22021007897 to Xe3 platforms") Fixes: e5c13e2c505b ("drm/xe/xe2hpg: Add Wa_22021007897") Fixes: 8ccf5f6b2295 ("drm/xe/tuning: Apply windower hardware filtering setting on Xe3 and Xe3p")
Bspec: 66534, 71185, 74417 Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patch.msgid.link/20260514-rtp-mcr-check-v3-3-30dd47855fee@intel.com Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Daniel Lezcano [Tue, 5 May 2026 14:44:47 +0000 (16:44 +0200)]
thermal/core: Split __thermal_cooling_device_register() into two functions
In preparation for the upcoming changes separating OF and non-OF code,
split __thermal_cooling_device_register() into allocation and addition
phases.
This allows moving the device node assignment out of the core
initialization path.
This change is not a trivial split. The lifetime of the cooling device
is managed by the device core through put_device(), which triggers
thermal_release() to free all associated resources.
With the introduction of thermal_cooling_device_alloc(), the allocation
path must mirror what thermal_release() undoes. In contrast,
thermal_cooling_device_add() must not perform any rollback and relies
on put_device() for cleanup on error paths. This avoids both double
free and resource leaks.
As part of this rework, add the missing device_initialize() call when
allocating the cooling device.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Replace device_register() with device_add() ]
[ rjw: Rebase on top of previously applied material ] Link: https://patch.msgid.link/20260505144447.2853933-1-daniel.lezcano@oss.qualcomm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Fri, 15 May 2026 20:22:07 +0000 (13:22 -0700)]
Merge tag 'for-7.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixup warning when allocating memory for readahead, __GFP_NOWARN was
accidentally dropped when setting mapping constraints
- in tracepoint of file sync, fix sleeping in atomic context when
handling dentries
- harden initial loading of block group on crafted/fuzzed images,
iterate all chunk mapping entries unconditionally
- fix freeing pages of submitted io after checking for errors
- fix incorrect inode size after remount when using fallocate KEEP_SIZE
mode (also requires disabled 'no-holes' feature)
* tag 'for-7.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect i_size after remount caused by KEEP_SIZE prealloc gap
btrfs: only release the dirty pages io tree after successful writes
btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()
btrfs: always pass __GFP_NOWARN from add_ra_bio_pages()
btrfs: fix check_chunk_block_group_mappings() to iterate all chunk maps
Linus Torvalds [Fri, 15 May 2026 20:17:46 +0000 (13:17 -0700)]
Merge tag 'xfs-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A few bug fixes, nothing really special stands out"
* tag 'xfs-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix typo in comment
xfs: fix the "limiting open zones" message
xfs: flush delalloc blocks on ENOSPC in xfs_trans_alloc_icreate
xfs: check da node block pad field during scrub
xfs: fix memory leak for data allocated by xfs_zone_gc_data_alloc()
xfs: fix memory leak on error in xfs_alloc_zone_info()
xfs: check directory data block header padding in scrub
xfs: zero directory data block padding on write verification
xfs: zero entire directory data block header region at init
xfs: remove the meaningless XFS_ALLOC_FLAG_FREEING
Linus Torvalds [Fri, 15 May 2026 20:11:41 +0000 (13:11 -0700)]
Merge tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for this release:
- Correctness fix for the new sunrpc cache netlink protocol
Marked for stable:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts"
* tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix infinite loop in layout state revocation
sunrpc: start cache request seqno at 1 to fix netlink GET_REQS
nfsd: update mtime/ctime on COPY in presence of delegated attributes
nfsd: update mtime/ctime on CLONE in presense of delegated attributes
nfsd: fix file change detection in CB_GETATTR
nfsd: fix GET_DIR_DELEGATION when VFS leases are disabled
Linus Torvalds [Fri, 15 May 2026 19:47:00 +0000 (12:47 -0700)]
Merge tag 'block-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe merge request via Keith:
- Fix memory leak on a passthrough integrity mapping failure (Keith)
- Hide secrets behind debug option (Hannes)
- Fix pci use-after-free for host memory buffer (Chia-Lin Kao)
- Fix tcp taregt use-after-free for data digest (Sagi)
- Revert a mistaken quirk (Alan Cui)
- Fix uevent and controller state race condition (Maurizio)
- Fix apple submission queue re-initialization (Nick Chan)
- Three fixes for blk-integrity, fixing an issue with the user data
mapping and two problems with recomputing number of segments
- Two fixes for the iov_iter bounce buffering
- Fix for the handling of dead zoned write plugs
- ublk max_sectors validation fix, with associated selftest addition
* tag 'block-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme-apple: Reset q->sq_tail during queue init
block: align down bounces bios
block: pass a minsize argument to bio_iov_iter_bounce
selftests: ublk: cap nthreads to kernel's actual nr_hw_queues
block: fix handling of dead zone write plugs
block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()
block: recompute nr_integrity_segments in blk_insert_cloned_request
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
nvme: fix race condition between connected uevent and STARTED_ONCE flag
Revert "nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808"
nvmet-tcp: Fix potential UAF when ddgst mismatch
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvmet-auth: Do not print DH-HMAC-CHAP secrets
nvme: fix bio leak on mapping failure
nvme: make prp passthrough usage less scary
ublk: reject max_sectors smaller than PAGE_SECTORS in parameter validation
Linus Torvalds [Fri, 15 May 2026 19:34:02 +0000 (12:34 -0700)]
Merge tag 'io_uring-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Small series sanitizing the locking done for either modifying or
reading a chain of requests
- If the application has a pid namespace, ensure that the sqthread pid
is correctly printed in fdinfo
- Fix for a hashing issue in the io-wq thread pool, which could lead to
a use-after-free
- Kill dead argument from io_prep_rw_pi()
- Fix for a missed validation of the CQ ring head, affecting CQE refill
* tag 'io_uring-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: validate user-controlled cq.head in io_cqe_cache_refill()
io-wq: check that the predecessor is hashed in io_wq_remove_pending()
io_uring/rw: drop unused attr_type_mask from io_prep_rw_pi()
io_uring: hold uring_lock across io_kill_timeouts() in cancel path
io_uring: defer linked-timeout chain splice out of hrtimer context
io_uring: hold uring_lock when walking link chain in io_wq_free_work()
io_uring/fdinfo: translate SqThread PID through caller's pid_ns
Linus Torvalds [Fri, 15 May 2026 19:27:03 +0000 (12:27 -0700)]
Merge tag 'hardening-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- gcc-plugins: Fix GCC 16 removal of CONST_CAST macros
* tag 'hardening-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: Always define CONST_CAST_GIMPLE and CONST_CAST_TREE
projects / thirdparty / kernel / linux.git / log
