Daniel Golle [Mon, 13 Jul 2026 23:30:53 +0000 (00:30 +0100)]
gpiolib: tolerate gpio-hogs lacking a hogging state
Commit d1d564ec4992 ("gpio: move hogs into GPIO core") made
gpiochip_add_hog() return -EINVAL for hog nodes lacking any of the
'input', 'output-low' or 'output-high' properties. The error is
propagated by gpiochip_hog_lines() and fails registration of the
whole GPIO chip.
The previous OF-specific implementation tolerated such nodes:
of_parse_own_gpio() warned "no hogging state specified, bailing out"
and of_gpiochip_add_hog() stopped processing the node without failing
chip registration.
Some boards deliberately ship hog nodes without a hogging state in
their base devicetree and supply the state via overlay, e.g. the PCIe
slot key selection hogs on the BananaPi R4 Pro added in
commit e309fa232d12 ("arm64: dts: mediatek: mt7988a-bpi-r4pro: rework
pcie gpio-hog handling"), as the polarity set in the base devicetree
could not be overridden from an overlay.
Booting such a board without an overlay applied now fails to register
the gpiochip. On the BananaPi R4 Pro this means the MT7988A pinctrl
device fails to probe, all peripherals including the console UART
defer forever, and the board finally hangs when clk_disable_unused()
gates the clocks of the UART still in use by earlycon:
Restore the previous behaviour by warning about hog nodes lacking a
hogging state and skipping them instead of failing the registration
of the whole GPIO chip.
gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe()
The memory allocated for priv->blob.data is not freed in the error paths
that follow the fops_buf_size_set() call in gpio_la_poll_probe(), as
well as in the remove function. Fix that by using device managed action
to free the memory on remove.
A couple of runs of different AI tools have generated something like the
following bug report:
In nested_domain_free(), when refcount_dec_and_test() returns false
(other nested domains still reference the same gdom_info), the function
returns without calling kfree(ndom), leaking the nested_domain
structure. This problem wasn't introduced by this patch, but exists in
the code from commit 757d2b1fdf5b that the patch modifies. Each
nested_domain (ndom) is allocated individually in
amd_iommu_alloc_domain_nested() via kzalloc_obj(*ndom). The .free
callback is the sole point responsible for freeing this domain. When
the refcount is > 0, only the xa_unlock_irqrestore is performed and the
function returns, leaving ndom permanently allocated. This leak occurs
every time a nested domain sharing a gDomID is destroyed while other
domains still use that gDomID.
There is a similar leak later in this function in the WARN_ON() test when
the mapping is already NULL. Switch to a RAII-based cleanup for ndom, since
it should always be freed in this function.
Fixes: 757d2b1fdf5b ("iommu/amd: Introduce gDomID-to-hDomID Mapping and handle parent domain invalidation") Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Reviewed-by: Ankit Soni <Ankit.Soni@amd.com> Signed-off-by: Will Deacon <will@kernel.org>
iommu/amd: Fix IRQ unsafe locking in gdom allocation
Lockdep complains:
[ 259.410489] =====================================================
[ 259.417287] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 259.424667] 7.0.0-g51db1d8d2113 #54 Not tainted
[ 259.429718] -----------------------------------------------------
[ 259.436516] qemu-system-x86/10143 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 259.444670] ff3b2b1c60305170 (&xa->xa_lock#25){+.+.}-{3:3}, at: __domain_flush_pages+0x17c/0x4b0
[ 259.454485]
and this task is already holding:
[ 259.460991] ff3b2b1c98504cc0 (&domain->lock){-.-.}-{3:3}, at: amd_iommu_iotlb_sync+0x25/0x60
[ 259.470408] which would create a new lock dependency:
[ 259.476041] (&domain->lock){-.-.}-{3:3} -> (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.483615]
but this new dependency connects a HARDIRQ-irq-safe lock:
[ 259.492447] (&domain->lock){-.-.}-{3:3}
[ 259.492449]
... which became HARDIRQ-irq-safe at:
[ 259.503705] lock_acquire+0xb6/0x2e0
[ 259.507790] _raw_spin_lock_irqsave+0x3e/0x60
[ 259.512748] amd_iommu_flush_iotlb_all+0x20/0x50
[ 259.517996] iommu_dma_free_iova.isra.0+0x1b8/0x1e0
[ 259.523534] __iommu_dma_unmap+0xc2/0x140
[ 259.528100] iommu_dma_unmap_phys+0x55/0xc0
[ 259.532863] dma_unmap_phys+0x274/0x2e0
[ 259.537238] dma_unmap_page_attrs+0x17/0x30
[ 259.542000] nvme_unmap_data+0x13e/0x280
[ 259.546473] nvme_pci_complete_batch+0x45/0x70
[ 259.551524] nvme_irq+0x83/0x90
[ 259.555123] __handle_irq_event_percpu+0x92/0x360
[ 259.560466] handle_irq_event+0x39/0x80
[ 259.564841] handle_edge_irq+0xb2/0x1a0
[ 259.569214] __common_interrupt+0x4e/0x130
[ 259.573882] common_interrupt+0x88/0xa0
[ 259.578256] asm_common_interrupt+0x27/0x40
[ 259.583019] cpuidle_enter_state+0x119/0x5d0
[ 259.587877] cpuidle_enter+0x2e/0x50
[ 259.591962] do_idle+0x153/0x2c0
[ 259.595657] cpu_startup_entry+0x29/0x30
[ 259.600128] start_secondary+0x118/0x150
[ 259.604601] common_startup_64+0x13e/0x141
[ 259.609266]
to a HARDIRQ-irq-unsafe lock:
[ 259.615384] (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.615386]
... which became HARDIRQ-irq-unsafe at:
[ 259.627039] ...
[ 259.627039] lock_acquire+0xb6/0x2e0
[ 259.633071] _raw_spin_lock+0x2f/0x50
[ 259.637250] amd_iommu_alloc_domain_nested+0x140/0x3c0
[ 259.643078] iommufd_hwpt_alloc+0x272/0x800 [iommufd]
[ 259.648813] iommufd_fops_ioctl+0x14e/0x200 [iommufd]
[ 259.654547] __x64_sys_ioctl+0x9d/0xf0
...
Since amd_iommu_domain_flush_pages() necessarily holds domain->lock to do the
flush, switch the allocation side in gdom_info_load_or_alloc_locked() to
HARDIRQ-safe allocation. The IOMMU_DESTROY->free path has the same issue,
so switch that path to HARDIRQ-safe locking as well.
Fixes: 757d2b1fdf5b ("iommu/amd: Introduce gDomID-to-hDomID Mapping and handle parent domain invalidation") Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Reviewed-by: Ankit Soni <Ankit.Soni@amd.com> Signed-off-by: Will Deacon <will@kernel.org>
KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages.
Fixes: 96c66e87deee ("KVM/nVMX: Use kvm_vcpu_map when mapping the virtual APIC page") Fixes: 3278e0492554 ("KVM/nVMX: Use kvm_vcpu_map when mapping the posted interrupt descriptor table") Fixes: fe1911aa443e ("KVM: nVMX: Use kvm_vcpu_map() to get/pin vmcs12's APIC-access page") Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 15 Jul 2026 10:12:37 +0000 (12:12 +0200)]
Merge tag 'kvmarm-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #1
- Fix an accounting buglet when reclaiming pages from a protected
guest
- Fix a bunch of architectural compliance issues when injecting a
synthesised exception, most of which were missing the PSTATE.IL bit
indicating a 32bit-wide instruction
- Another set of fixes addressing issues with translation of VNCR_EL2,
including corner cases where the guest point that register at a RO
page...
- Don't warn when trapping accesses to ZCR_EL2 from an L2 guest, as
that's not unexpected at all
- Address a bunch of races with LPI migration vs LPIs being disabled
- Fix a total howler of a bug combining FEAT_MOPS and NV, resulting in
exception returning in the wrong place...
- Coerce Fuad Tabba into a reviewer role, and may his Inbox catch
fire!
====================
bpf: Reject negative const offsets for buffer pointers
Reject negative effective offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses. Calculate the effective access start using signed arithmetic
to prevent unsigned access-end accounting from wrapping, and cover both
load-time rejection and the raw tracepoint writable attach-time path.
---
Changes in v5:
- Simplify __check_buffer_access() to reject a negative effective start
after confirming that var_off is constant. Validate the combined
offset instead of rejecting negative instruction offsets separately.
Drop the duplicate BPF_MAX_VAR_OFF check because pointer arithmetic
already bounds constant offsets, and remove the redundant size < 0
check.
- Switch the raw tracepoint writable attach tests from nbd_send_request
to bpf_testmod_test_writable_bare_tp, avoiding the NBD configuration
dependency and its false-pass condition.
- Split the attach coverage into named subtests and require
bpf_raw_tracepoint_open() to return -EINVAL.
- Add verifier coverage for a negative constant PTR_TO_BUF offset.
Changes in v4:
- Correct the Fixes tag to point to 022ac0750883, where pointer offsets
were folded into reg->var_off.
- Drop the end > U32_MAX check, which is unreachable after bounding const
var_off with BPF_MAX_VAR_OFF while keeping instruction offsets and
access sizes bounded.
Changes in v3:
- Check constant var_off against +/-BPF_MAX_VAR_OFF before computing
the effective access range, matching the existing verifier pointer
offset convention.
- Keep explicit rejection of negative instruction offsets and keep
bounded negative constant var_off valid when the effective offset is
non-negative.
Changes in v2:
- Split the kernel fix and selftests into separate patches.
- Add an attach-time raw tracepoint writable test that exercises
max_tp_access against nbd_send_request's writable size.
- Adjust selftest formatting to use the 100 character line width.
Add verifier coverage for constant negative offsets on PTR_TO_TP_BUFFER
and PTR_TO_BUF pointers. Both programs adjust the buffer pointer by -8
and access it at offset zero, so the negative effective start must be
rejected at load time.
Switch the raw tracepoint writable attach checks from nbd_send_request
to bpf_testmod_test_writable_bare_tp, avoiding a dependency on the NBD
tracepoint. Keep the existing past-end case and add a case with a
negative var_off compensated by a positive instruction offset. The
effective start remains non-negative, so the program loads, but its
access end exceeds the writable context size and
bpf_raw_tracepoint_open() must return -EINVAL.
Sun Jian [Tue, 14 Jul 2026 09:38:45 +0000 (02:38 -0700)]
bpf: Reject negative const offsets for buffer pointers
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF.
Fixes: 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Cc: stable@vger.kernel.org # 5.2.0 Link: https://patch.msgid.link/20260714093846.18159-2-sun.jian.kdev@gmail.com Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
====================
bpf, sockmap: Fix FIONREAD for sockets without a verdict program
Sockets added to a sockmap/sockhash with no stream/skb verdict program
attached answer FIONREAD with 0 even when unread data is pending in
sk_receive_queue. Fix tcp_bpf_ioctl() to account for the receive queue
in that case, and add a selftest.
Changes in v3:
- Remove unused sk_psock_msg_inq()
- Link to v2: https://patch.msgid.link/20260708-fionread-no-verdict-v2-0-29dd293621c7@coralogix.com
Changes in v2:
- Split the fix and the selftest into separate patches
- Use READ_ONCE() to read the verdict program pointers
- Link to v1: https://patch.msgid.link/20260707-fionread-no-verdict-v1-1-ce94a72357ec@coralogix.com
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
tcp_bpf_ioctl() answers SIOCINQ from psock->msg_tot_len, which only
counts bytes in ingress_msg. Without a stream/skb verdict program
nothing is diverted there: data stays in sk_receive_queue, so FIONREAD
returns 0 even though read() returns data.
Add tcp_inq() to the reported value when the psock has no verdict
program. The two queues are disjoint, so bytes redirected into
ingress_msg from other sockets stay correctly accounted through
msg_tot_len.
Luke Wang [Wed, 15 Jul 2026 07:18:18 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: fix resume error handling
Check pm_runtime_force_resume() return value in resume. If it fails
(clock enable failure), return immediately since accessing hardware
registers on an unclocked device would cause a kernel panic.
The early return intentionally skips enable_irq() and
sdhci_disable_irq_wakeups() because the IRQ handler reads
SDHCI_INT_STATUS, which would also fault without clocks. The PM runtime
usage counter leak only affects this already-broken device instance and
is an acceptable tradeoff to preserve system stability.
Remove the return value check for mmc_gpio_set_cd_wake(host->mmc, false)
since disable_irq_wake() called internally always returns 0.
Also return 0 explicitly on the success path instead of propagating
stale return values.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:17 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: make non-fatal errors non-blocking in suspend
Make pinctrl_pm_select_sleep_state() and mmc_gpio_set_cd_wake() failures
non-fatal in the suspend path. These failures only mean slightly higher
power consumption or missing CD wakeup capability, but should not block
system suspend.
Also change the function to always return 0 on the success path instead
of propagating non-fatal warning return values.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:16 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:15 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.
The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning
Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:14 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: restore pinctrl before restoring ios timing on resume
SDIO devices such as WiFi may keep power during suspend, so the MMC
core skips full card re-initialization on resume and directly restores
the host controller's ios timing to match the card. For DDR mode,
pm_runtime_force_resume() sets DDR_EN before the pin configuration is
restored from sleep state.
This is related to the SoC IP integration: switching pinctrl setting
(changing alt from GPIO to USDHC) impacts the internal loopback path.
If pinctrl configures the pad to GPIO function, once DDR_EN is set, the
DLL delay will be fixed based on the GPIO function loopback path. When
the pinctrl is later changed to USDHC function, the internal loopback
path changes, making the original fixed sample point no longer suitable
for the current loopback path. This causes persistent read CRC errors on
subsequent data transfers.
SD/eMMC running in DDR mode are unaffected as they are fully
re-initialized from legacy timing after resume.
Fix this by restoring the pinctrl state based on current timing mode
using esdhc_change_pinstate() before pm_runtime_force_resume(). This
ensures the correct pin configuration (e.g., 100/200MHz for UHS modes)
is applied before DDR_EN is set. Only restore for non-wakeup devices
since wakeup devices kept their active pin state during suspend.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:13 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore
esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the
top of the function and returns -EINVAL if either is not defined. This
prevents the default case from ever being reached, which means devices
with a sleep pinctrl state but without high-speed pin states (100mhz/
200mhz) can never restore their default pin configuration.
Move the IS_ERR checks for pins_100mhz and pins_200mhz into their
respective switch cases.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:12 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: restore DLL override for DDR modes on resume
sdhci_esdhc_imx_hwinit() unconditionally clears ESDHC_DLL_CTRL by
writing zero. For SDIO devices that keep power during system suspend
and operate in DDR mode, the card remains in DDR timing while the host
DLL override configuration is lost.
Extract the DLL override setup from esdhc_set_uhs_signaling() into
a helper esdhc_set_dll_override(), and call it on the resume path
when the card kept power and is using a DDR timing mode.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Luke Wang [Wed, 15 Jul 2026 07:18:11 +0000 (15:18 +0800)]
mmc: sdhci-esdhc-imx: remove unnecessary mmc_card_wake_sdio_irq check for tuning save/restore
The tuning save/restore during system PM is conditioned on
mmc_card_wake_sdio_irq(), but this check is unrelated to whether
tuning values need to be preserved. The actual requirement is that
the card keeps power during suspend and the controller is a uSDHC.
SDIO devices using out-of-band GPIO wakeup maintain power during
suspend but do not set the SDIO IRQ wake flag. In this case the
tuning delay values are not saved/restored.
Remove the unnecessary mmc_card_wake_sdio_irq() condition from both
the suspend save and resume restore paths.
Fixes: c63d25cdc59a ("mmc: sdhci-esdhc-imx: Save tuning value when card stays powered in suspend") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Fix for UDP sockets getting leaked during sockmap lookup/release.
Accompanied by selftests updates.
Two Sashiko's concerns to be addressed separately:
https://lore.kernel.org/bpf/20260626205814.BAC3C1F000E9@smtp.kernel.org/
Signed-off-by: Michal Luczaj <mhal@rbox.co>
---
Changes in v4:
- selftest: drop redundant `if (err)` [Sashiko]
- Link to v3: https://patch.msgid.link/20260702-sockmap-lookup-udp-leak-v3-0-ff8de8782468@rbox.co
Changes in v3:
- selftest: better error handling, ASSERT_*() macros [Sashiko]
- selftest: fix grammar, reorder patches [Kuniyuki]
- Link to v2: https://patch.msgid.link/20260626-sockmap-lookup-udp-leak-v2-0-7e7e201c951a@rbox.co
Changes in v2:
- selftest: drop the original, adapt old tests
- fix: change approach to rejecting unbound UDP [Kuniyuki]
- Link to v1: https://patch.msgid.link/20260623-sockmap-lookup-udp-leak-v1-0-05804f9308e4@rbox.co
To: Alexei Starovoitov <ast@kernel.org>
To: Daniel Borkmann <daniel@iogearbox.net>
To: Andrii Nakryiko <andrii@kernel.org>
To: Eduard Zingerman <eddyz87@gmail.com>
To: Kumar Kartikeya Dwivedi <memxor@gmail.com>
To: Martin KaFai Lau <martin.lau@linux.dev>
To: Song Liu <song@kernel.org>
To: Yonghong Song <yonghong.song@linux.dev>
To: Jiri Olsa <jolsa@kernel.org>
To: Emil Tsalapatis <emil@etsalapatis.com>
To: Shuah Khan <shuah@kernel.org>
To: John Fastabend <john.fastabend@gmail.com>
To: Jakub Sitnicki <jakub@cloudflare.com>
To: Jiayuan Chen <jiayuan.chen@linux.dev>
To: Eric Dumazet <edumazet@google.com>
To: Kuniyuki Iwashima <kuniyu@google.com>
To: Paolo Abeni <pabeni@redhat.com>
To: Willem de Bruijn <willemb@google.com>
To: "David S. Miller" <davem@davemloft.net>
To: Jakub Kicinski <kuba@kernel.org>
To: Simon Horman <horms@kernel.org>
To: Cong Wang <cong.wang@bytedance.com> Cc: bpf@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org
---
====================
Michal Luczaj [Tue, 7 Jul 2026 04:23:57 +0000 (06:23 +0200)]
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject
unhashed sockets in bpf_sk_assign").
Fixes: 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets") Suggested-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-2-f878346f27ab@rbox.co Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Xie Bo [Wed, 15 Jul 2026 02:03:59 +0000 (10:03 +0800)]
RISC-V: KVM: Serialize virtual interrupt pending state updates
KVM RISC-V tracks guest local interrupt state with two bitmaps:
- irqs_pending: interrupts that should be visible to the guest
- irqs_pending_mask: interrupts whose pending state changed
The current code updates those bitmaps with independent atomic bitops
and assumes a multiple-producer, single-consumer protocol. That model
does not actually hold.
kvm_riscv_vcpu_sync_interrupts() is not a pure consumer. When the guest
changes guest-visible HVIP state, sync_interrupts() writes both
irqs_pending and irqs_pending_mask to reflect the new guest state back
into KVM state. As a result, irqs_pending and irqs_pending_mask form a
single logical state transition, but they are not updated atomically as
a pair.
This allows a race where a newly injected interrupt is lost. For
example:
After that interleaving, a later flush can update HVIP without VSSIP
even though a new virtual interrupt was injected. In practice, the
guest can remain blocked in WFI with work pending.
The same pending/mask protocol is shared by VS soft interrupts, PMU
overflow delivery, and AIA high interrupt synchronization, so the race
is not limited to one interrupt source.
Fix this by serializing all updates to irqs_pending and irqs_pending_mask
with a per-vCPU raw spinlock. This keeps the pending bit and the dirty
mask as one state transition across:
- set/unset interrupt
- guest HVIP sync
- interrupt flush to guest CSR state
- vCPU reset
- AIA CSR writes that clear dirty state
Use non-atomic bitmap operations while holding the lock. Hold the lock
across the AIA sync, flush, and pending checks as well, so both bitmap
words share the same serialization domain.
This intentionally replaces the existing lockless protocol instead of
trying to repair it with additional barriers. The problem is not memory
ordering on a single field; it is that two separate bitmaps encode one
shared state machine while both producers and sync paths can modify
them. A per-vCPU raw spinlock keeps the fix small, local, and suitable
for backporting.
Oliver Ohrt [Wed, 15 Jul 2026 07:04:09 +0000 (00:04 -0700)]
ALSA: hda/realtek: Fix speakers on Alienware x16 R2
The Alienware x16 R2 has two pairs of speakers, but the BIOS
marks pin 0x17 as unused, so only the pin 0x14 pair plays and
audio is very quiet/dull.
Apply ALC289_FIXUP_DUAL_SPK like on other Dell machines to set
up pin 0x17 and route it to DAC1. Tested on my x16 R2 with
kernel 6.18.38, and now all speakers play at full volume.
ALSA: hda/realtek: Add quirk for HP EliteBook 830 G8 (8AB8) to enable mute LEDs
The sound and microphone mute LEDs do not function on this newer
revision of the board (8AB8) while they do on the older 880D models.
I have verified this on another laptop which was manufactured before
the one with the issue.
Added the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED from a G9 model, which
uses the same codec, to make it work. Tested on kernel version 7.1.3 on
the aforementioned newer revision notebook.
Matthew Brost [Thu, 2 Jul 2026 21:48:15 +0000 (14:48 -0700)]
drm/ttm: Account for NULL and handle pages in ttm_pool_backup
Pages in ttm_pool_backup can be NULL or backup handles
(ttm_backup_page_ptr_is_handle()), neither of which can be passed to
set_pages_array_wb() or freed. Add a dedicated WB pass before the
dma/purge loop that walks allocations using the same i += num_pages
stride, skipping NULL and handle entries, and calls set_pages_array_wb()
once per contiguous run of real pages. Apply the same NULL/handle guard
to the dma/purge loop.
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn> Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
Andy Shevchenko [Tue, 14 Jul 2026 13:53:33 +0000 (15:53 +0200)]
smb/client: Use EXPORT_SYMBOL_IF_KUNIT() to export symbols in SMB2
Replace EXPORT_SYMBOL_FOR_MODULES() with EXPORT_SYMBOL_IF_KUNIT()
to mark the symbols as visible only if CONFIG_KUNIT is enabled.
Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols. This is the standard way for all KUnit
tests.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
Andy Shevchenko [Tue, 14 Jul 2026 12:21:20 +0000 (14:21 +0200)]
smb/client: Use EXPORT_SYMBOL_IF_KUNIT() to export symbols
Replace EXPORT_SYMBOL_FOR_MODULES() with EXPORT_SYMBOL_IF_KUNIT()
to mark the symbols as visible only if CONFIG_KUNIT is enabled.
Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols. This is the standard way for all KUnit
tests.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 7dadeaa6e851 ("sched: Further restrict the preemption
modes"), powerpc always has CONFIG_PREEMPTION because only
CONFIG_PREEMPT and CONFIG_PREEMPT_LAZY are possible, even in
dynamic preemption mode (see sched_dynamic_mode).
As a consequence, need_irq_preemption() is always true and can be
removed.
And because commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY
feature") includes linux/irq-entry-common.h which already declares
sk_dynamic_irqentry_exit_cond_resched static key, asm/preempt.h
becauses useless and can be removed.
Amit Machhiwal [Sun, 14 Jun 2026 17:34:37 +0000 (23:04 +0530)]
powerpc/dt_cpu_ftrs: Set CPU_FTR_P11_PVR for Power11 and later processors
When using device tree CPU features (dt-cpu-ftrs), the kernel bypasses
the traditional cputable-based CPU identification and instead derives
CPU features from the device tree's "ibm,powerpc-cpu-features" node
provided by firmware.
However, CPU_FTR_P11_PVR is a kernel-internal feature flag used to
identify Power11 and later processors, and is not represented in the
device tree's ISA feature set. While ISA v3.1 support (indicated by
CPU_FTR_ARCH_31) is present on both Power10 and Power11, the
CPU_FTR_P11_PVR flag is specifically needed by code that must
distinguish between Power10 and Power11 processors.
Without this flag set, code that checks for Power11 using
cpu_has_feature(CPU_FTR_P11_PVR) will incorrectly return false on
Power11+ systems using dt-cpu-ftrs, leading to incorrect behavior.
This issue manifests specifically in powernv environments (bare-metal
or QEMU TCG with powernv machine type), where skiboot/OPAL firmware
provides the "ibm,powerpc-cpu-features" node, causing the kernel to
use dt-cpu-ftrs. The issue does not affect pseries guests, where SLOF
firmware does not provide this node, causing the kernel to fall back
to the traditional cputable path (identify_cpu) which correctly sets
CPU_FTR_P11_PVR during PVR-based CPU identification.
In powernv TCG guests, the missing flag causes KVM code to trigger
warnings when attempting to create KVM guests, as cpu_features shows
0x000c00eb8f4fb187 (missing bit 53) instead of the correct
0x002c00eb8f4fb187 (with bit 53 set).
Fix this by setting CPU_FTR_P11_PVR for all processors with
PVR >= PVR_POWER11 when ISA v3.1 support is detected in
cpufeatures_setup_start(). This approach ensures forward
compatibility with future processor generations.
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name.
Since uptime is 194s, system time of each CPU can't be more than 19400.
Sum of system time of all CPUs can't be more than 19400*240 4656000.
In fact huge value is close to mftb(). Note mftb doesn't reset on powerVM
when the LPAR restart. It only resets when whole system resets. The same
issue exists for kexec too.
This happens since starttime is not setup at init time. Once it is set
then subsequent vtime_delta will return the right delta.
Fix it by initializing the starttime during CPU initialization. This
fixes the large times seen.
Rosen Penev [Thu, 4 Jun 2026 04:33:09 +0000 (21:33 -0700)]
powerpc/85xx: Add fsl,ifc to common device ids
Add fsl,ifc to mpc85xx_common_ids so that of_platform_bus_probe
creates a platform device for the IFC node even without 'simple-bus'
in its compatible property. On P1010 and similar platforms the IFC
node is a direct child of the root, so it must be explicitly matched
to be populated.
Aurelien Jarno [Tue, 23 Jun 2026 20:40:57 +0000 (22:40 +0200)]
arch/riscv: vdso: remove CFI landing pad from rt_sigreturn
When CONFIG_RISCV_USER_CFI is enabled, the CFI version of the vDSO, has
a CFI landing pad instruction at the start of __vdso_rt_sigreturn. This
breaks libgcc's unwinding code which matches on the first two
instructions. Other unwinders that rely on similar instruction matching
may also be affected.
Since __vdso_rt_sigreturn is reached as part of signal-return handling
rather than via an indirect call/jump from userspace, it does not need a
CFI landing pad. Remove it and restore the instruction sequence expected
by existing unwinding code.
This matches what was done on arm64 in commit 9a964285572b ("arm64:
vdso: Don't prefix sigreturn trampoline with a BTI C instruction") for a
similar issue.
Cc: stable@vger.kernel.org Fixes: 37f57bd3faea ("arch/riscv: compile vdso with landing pad and shadow stack note") Co-authored-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://patch.msgid.link/20260623204058.498120-1-aurelien@aurel32.net
[pjw@kernel.org: fixed comment style] Signed-off-by: Paul Walmsley <pjw@kernel.org>
accel/amdxdna: reject command submission on devices without a submit op
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
accel/amdxdna: reject user command submission without a command BO
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Roman Vivchar [Thu, 9 Jul 2026 13:31:29 +0000 (16:31 +0300)]
i2c: mediatek: fix WRRD for SoCs without auto_restart option
MediaTek mt65xx family SoCs have no auto restart, however, they still
support the WRRD mode in the hardware. Because auto_restart is set to 0,
the WRRD mode will be never enabled, leading to read errors.
Fix this by removing auto_restart check from the WRRD enable path.
Fixes: b49218365280 ("i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD") Signed-off-by: Roman Vivchar <rva333@protonmail.com> Cc: <stable@vger.kernel.org> # v6.18+ Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260709-6572-6595-i2c-v2-1-b2fb8510d1d3@protonmail.com
Ondrej Mosnacek [Tue, 14 Jul 2026 12:57:59 +0000 (14:57 +0200)]
selinux: fix incorrect execmem checks on overlayfs
The commit fixing the overlayfs mmap() and mprotect() access checks
failed to skip the execmem check in __file_map_prot_check() for the case
where the "mounter check" is being performed. This check should be
performed only against the credentials of the task that is calling
mmap()/mprotect(), since it doesn't pertain to the file itself, but
rather just gates the ability of the calling task to get an executable
memory mapping in general.
The purpose of the "mounter check" is to guard against using an
overlayfs mount to gain file access that would otherwise be denied to
the mounter. For execmem this is not relevant, as there is no further
file access granted based on it (notice that the file's context is not
used as the target in the check), so checking it also against the
mounter credentials would be incorrect.
Fix this by passing a boolean to [__]file_map_prot_check() and
selinux_mmap_file_common() that indicates if we are doing the "mounter
check" and skiping the execmem check in that case. Since this boolean
also indicates if we use current_cred() or the mounter cred as the
subject, also remove the "cred" argument from these functions and
determine it based on the boolean and the file struct.
Cc: stable@vger.kernel.org Fixes: 82544d36b172 ("selinux: fix overlayfs mmap() and mprotect() access checks") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Xuanqiang Luo [Tue, 14 Jul 2026 15:08:08 +0000 (23:08 +0800)]
i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource()
If devm_platform_get_and_ioremap_resource() returns an error,
mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to
get the error code. This results in a use-after-free.
Adrian Ng Ho Yin [Tue, 14 Jul 2026 05:37:47 +0000 (13:37 +0800)]
firmware: stratix10-svc: fix teardown order in remove to prevent race
In stratix10_svc_drv_remove(), stratix10_svc_async_exit() was called
before client devices were unregistered. This created a race window
where child devices could still be issuing service requests through
the async channels after the async infrastructure had already been
torn down.
Unregister client devices before tearing down the async threads and
channels to ensure all in-flight service calls drain before the
underlying infrastructure is destroyed.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication") Cc: stable@vger.kernel.org Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Adrian Ng Ho Yin [Tue, 14 Jul 2026 05:37:46 +0000 (13:37 +0800)]
firmware: stratix10-svc: handle NO_RESPONSE in async poll
Define INTEL_SIP_SMC_STATUS_NO_RESPONSE (0x3) and handle it in
stratix10_svc_async_poll() the same way as INTEL_SIP_SMC_STATUS_BUSY,
returning -EAGAIN so callers can retry instead of treating the poll as
a hard failure.
When the Secure Device Manager has not yet produced a response for an
asynchronous transaction, ATF is expected to return
INTEL_SIP_SMC_STATUS_NO_RESPONSE. Without this handling, the service
layer maps the status to -EINVAL and async clients cannot distinguish
"not ready yet" from a real error.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication") Cc: stable@vger.kernel.org Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The internal digital microphone on the MSI Vector A16 HX A8WIG is not
detected: the ACP platform devices are created, but snd_soc_acp6x_mach
never binds because the machine is missing from the DMI quirk table, so
no capture device shows up at all.
This is the same board as the already supported "Vector A16 HX A8WHG",
differing only in the trailing model code. Add the corresponding entry.
Chancel Liu [Fri, 10 Jul 2026 03:13:33 +0000 (12:13 +0900)]
ASoC: fsl: imx-card: Skip sysclk reset for active DAIs in shutdown
In a full-duplex setup, when one direction (playback or capture) is
closed while the other is still running, imx_aif_shutdown() was
unconditionally calling snd_soc_dai_set_sysclk() with rate=0 for all
cpu/codec DAIs, which would disable the clock still needed by the
active stream.
Add snd_soc_dai_active() checks before clearing sysclk so that only
truly inactive DAIs have their clocks reset.
Jaeyeong Lee [Sun, 12 Jul 2026 14:27:12 +0000 (14:27 +0000)]
io_uring/kbuf: free the replaced iovec after a successful grow
The provided-buffer validation fix deferred freeing a cached iovec
until validation completed. However, the deferred free uses arg->iovs.
After a grow, that points to the newly allocated array. Without a grow,
it points to the cached array that remains in use.
This leaves the caller with a dangling iovec in both cases and can
result in repeated frees. Only free org_iovs when arg->iovs actually
replaced it.
D3 resume notification handlers read firmware notification fields
before validating that the payload contains the complete fixed structure.
This causes buffer underread on malformed or truncated notifications.
Move payload length validation to occur before any field access in:
- iwl_mvm_parse_wowlan_info_notif: validate before reading num_mlo_link_keys
- iwl_mvm_wait_d3_notif D3_END handler: validate before reading flags
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe.
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes.
iwl_mld_thermal_zone_register() stores the thermal zone pointer in
mld->tzone before calling thermal_zone_device_enable(). If enable
fails, the code unregisters the zone but leaves mld->tzone stale,
so iwl_mld_thermal_zone_unregister() can unregister it again.
Clear mld->tzone after unregister in the error path.
While at it remove a pointless if in iwl_mld_thermal_zone_unregister
after we've alredy checked the tzone pointer is not NULL.
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing.
TLC_MNG_UPDATE_NOTIF uses firmware-provided sta_id to index
fw_id_to_link_sta[] and fw_id_to_mac_id[]. Validate sta_id
before array access to avoid out-of-bounds indexing.
wifi: iwlwifi: mvm: validate MCC header before n_channels
MCC response parsing read n_channels from v8/v4/v3 response variants
before ensuring the payload contained the fixed response header.
Add a minimum payload-length check for each response version before
reading n_channels, and keep the existing exact-size validation for the
channels array payload.
The beacon TX notification can arrive in different layouts, and fields
must be read only after selecting the expected format.
Parse gp2 and TSF from the matching notification structure in each
branch, and keep using the parsed gp2 for CSA countdown and debug output.
Drop the obsolete cached gp2 field.
wifi: iwlwifi: mvm: fix the FCS truncation logic in d3
Fix a harmless mistake in the wake packet management code in the d3
wakeup flow. If the FCS is truncated, we want to detect it, but we
cleared the icvlen before updating the truncated variable that holds the
number of bytes having been truncated.
Fix that.
wifi: iwlwifi: mld: don't parse a notif before checking its length
In order to compure the size of the iwl_mcc_update_resp which has a
variable length, we need to know the number of channels.
In order to read the number of channels, we must first check the
payload is long enough to read at least that.
wifi: iwlwifi: mvm: verify scan id reported by firmware
The scan id reported by firmware in scan complete notification is
used as an index to the scan status array. Verify the reported id
does not exceed the array size.
drm/gpusvm: publish dpagemap early to avoid device mapping leak on error
drm_gpusvm_get_pages() only stored the local dpagemap into
svm_pages->dpagemap on the success path. If a later page failed (e.g.
-EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap,
svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped
device_unmap() and leaked the device mappings already created.
Assign svm_pages->dpagemap when the first device page is mapped so the
err_unmap path can device_unmap() those mappings.
This issue was found by Sashiko AI review.
Fixes: f70da6f99d4f ("drm/gpusvm: pull out drm_gpusvm_pages substructure") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Honglei Huang <honghuan@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260701062800.409248-4-honghuan@amd.com
drm/gpusvm: do not route system pages to device_unmap() on IOVA unmap
In a mixed range: ctx->allow_mixed dpagemap is not NULL while some entries
are system pages. The unmap loop used:
dma_unmap_page(...);
else if (dpagemap && dpagemap->ops->device_unmap)
dpagemap->ops->device_unmap(...);
When use_iova is true the first condition is false for system pages,
so they fall through to device_unmap() and a system DMA address is
handed to the device specific unmap callback, risking invalid accesses
or state corruption.
Key the branch off addr->proto instead: system pages only need an explicit
dma_unmap_page() in the non IOVA case, IOVA system pages are already torn
down by the single dma_iova_destroy(), and only genuine device pages
reach device_unmap().
This issue was found by Sashiko AI review.
Fixes: 37ad039fb367 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Honglei Huang <honghuan@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260701062800.409248-3-honghuan@amd.com
drm/gpusvm: free the whole IOVA reservation on unmap
dma_iova_try_alloc() reserves IOVA for the entire range, but in a mixed
range only the system pages are linked (their total size is state_offset)
while device pages never touch the IOVA state. dma_iova_destroy() with
state_offset only frees the linked part, permanently leaking the IOVA
reserved for the device pages and eventually exhausting the IOVA space.
Unlink the linked system-page portion and free the whole reserved IOVA
instead. On the get_pages() error path state_offset is 0 (no page linked,
dma_addr[0] unpopulated), so skip the unlink and just free the reservation;
this also avoids reading the uninitialized dma_addr[0].dir there.
Allocate the dma_addr array with the zeroing kvzalloc_objs() so every entry
has a well-defined value.
This issue was found by Sashiko AI review.
Fixes: 37ad039fb367 ("drm/gpusvm: Use dma-map IOVA alloc, link, and sync API in GPU SVM") Cc: stable@vger.kernel.org Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Honglei Huang <honghuan@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260701062800.409248-2-honghuan@amd.com
Merge tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific fixes (including
regression fixes) or quirks accumulated since the last update. Some
highlights:
USB-audio:
- Fix per-channel volume imbalance regression for sticky mixers
- Validate input packet length in caiaq driver
- Quirks for iBasso DC-Elite, Musical Fidelity M6s DAC, and Redragon
H510-PRO Wireless headset
HD-audio:
- Fix a long-standing bug of cached processing coefficient verbs
- Make cs35l56 driver failing with missing firmware
- Fix cirrus codec Kconfig dependency, update MAINTAINERS
- Remove unneeded mic bias threshold override on Conexant
- Realtek codec quirks for ASUS ROG Ally X (headphone & mic), Dell
QCM1255, Legion Pro 7, HP/Victus laptops, Framework, and TongFang
laptops
ASoC:
- Add Eliza audio support on Qualcomm sc8280xp/sm8250 SoCs
- Fix SDCA linker error with ACP on AMD
- A few fixes for AMD ACP PCI driver
- Add TAS2783 support on AMD ACP 7.0 platforms
- Reset RT712-SDCA codec to fix silent headphone issue
- Soft reset S/PDIF datapath on Meson AIU FIFO
- Jack report fix for cs42l43
- TAS2562 shutdown GPIO clearing fix
- Sidecar amps quirk for Lenovo laptop in SOF SDW driver
Misc:
- Drop redundant mod_devicetable.h includes from FireWire drivers
- Fix memory leak and format mismatch in mixer kselftest"
* tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (36 commits)
ALSA: usb-audio: Add delay quirk for iBasso DC-Elite
ALSA: hda: conexant: Remove mic bias threshold override
ALSA: hda/realtek: Fix speakers on Legion Pro 7 16ARX8H with codec SSID 17aa:38a7
ALSA: hda/realtek: Fix speakers on MECHREVO WUJIE Series
ALSA: hda: cs35l56: Fail if wmfw file is missing
ALSA: usb-audio: Skip DSD quirk for Musical Fidelity M6s DAC
ALSA: hda: MAINTAINERS: Fix missing cirrus* file reference
ALSA: hda/cirrus_scodec: Make Kconfig visible if KUNIT
ALSA: hda/realtek: Add quirk for TongFang X6xx45xU
ALSA: hda/realtek - Fixed Headphone noise issue for Dell QCM1255
ASoC: tas2562: fix deprecated 'shut-down' GPIO always cleared after lookup
ASoC: cs42l43: Correct report for forced microphone jack
ASoC: qcom: sc8280xp: Add support for Eliza
ASoC: dt-bindings: qcom,sm8250: Add Eliza sound card
ASoC: dt-bindings: qcom: Add Eliza LPASS macro codecs
ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx
ALSA: hda/realtek - Add quirk for HP Victus 15-fa0xxx (MB 8A50)
ALSA: usb-audio: Add quirk for Redragon H510-PRO Wireless headset
ASoC: amd: ps: replace bitwise OR with logical OR in IRQ return check
ASoC: amd: ps: fix wrong ACP version string in pci_request_regions()
...
Merge tag 'for-7.2-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix root structure leak after relocation error
- fix optimization when checksums are read from commit root, fall back
to checksum root during relocation
- in tree-checker, validate length of inode reference in items
- validate properties before setting them
- validate free space cache entries on load
- transaction abort fixes
- fix printing of internal trees as signed numbers
- add error messages after critical lzo compression errors
* tag 'for-7.2-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: print-tree: print header owner as signed
btrfs: decentralize transaction aborts in create_reloc_root()
btrfs: tree-checker: validate INODE_REF's namelen
btrfs: lzo: add error message for invalid headers
btrfs: fallback to transaction csum tree on a commit root csum miss
btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots()
btrfs: reject free space cache with more entries than pages
btrfs: fix transaction abort logic in btrfs_fileattr_set()
btrfs: validate properties before setting them
When the interrupt status register reads zero, the handler should
return IRQ_NONE instead of IRQ_HANDLED. What the return value
actually feeds into is the spurious interrupt accounting in
note_interrupt(): falsely claiming IRQ_HANDLED defeats the "irq XX:
nobody cared" detection, so a stuck interrupt source would never be
caught.
mm/slab: prevent unbounded recursion in free path with new kmalloc type
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-kmalloc-normal caches can now have a valid tag.
Do not call mark_obj_codetag_empty() when freeing an obj_exts array to
avoid false warnings. KMALLOC_NO_OBJ_EXT don't need this as they never
allocate those arrays.
mem_alloc_profiling_enabled() tells whether memalloc profiling is
currently enabled. However, even when this function returns false,
it can be enabled later.
However, this is not enough. Some optimizations can be applied only when
memalloc profiling is permanently disabled. For example, to skip the
creation of KMALLOC_NO_OBJ_EXT caches at boot time, mem_profiling must
be set to "never", "0" w/ debugging on, or have been shutdown so that
it can no longer be enabled.
Introduce mem_alloc_profiling_permanently_disabled() for this purpose.
mm/slab: decouple SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT
Bootstrap caches are created with SLAB_NO_OBJ_EXT to disallow sheaves
and obj_exts.
To allow disabling obj_exts while allowing sheaves, decouple
SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT. Bootstrap caches now have both
SLAB_NO_SHEAVES and SLAB_NO_OBJ_EXT.
Vincent Jardin [Mon, 13 Jul 2026 18:12:00 +0000 (20:12 +0200)]
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework.
Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode") Signed-off-by: Vincent Jardin <vjardin@free.fr> Cc: <stable@vger.kernel.org> # v6.13+ Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Stefan Eichenberger <eichest@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260713-for-upstream-i2c-lx2160-fix-v1-v3-2-073ac9e103a5@free.fr
mm/slab: fix a memory leak due to bootstrapping sheaves twice
When kmalloc caches are aliased, multiple cache pointers reference
the same kmem_cache. As a result, iterating over kmalloc indices and
bootstrapping sheaves can bootstrap the same cache more than once and
leak memory.
Currently, this could happen when the architecture specifies
minimum alignment for slab caches that is larger than
ARCH_KMALLOC_MINALIGN.
Bootstrap sheaves only when the cache does not have them already.
Add a warning when bootstrap_cache_sheaves() is called for a cache
that already has sheaves enabled.
Vincent Jardin [Mon, 13 Jul 2026 18:11:59 +0000 (20:11 +0200)]
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range.
Fixes: 8e8782c71595 ("i2c: imx: add SMBus block read support") Signed-off-by: Vincent Jardin <vjardin@free.fr> Cc: <stable@vger.kernel.org> # v3.16+ Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Stefan Eichenberger <eichest@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20260713-for-upstream-i2c-lx2160-fix-v1-v3-1-073ac9e103a5@free.fr
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently.
Fixes: d68beb276ba26 ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object") Link: https://patch.msgid.link/r/b15f2b73520f389f3f57881da2f040e7bdc18876.1783311134.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Assisted-by: Claude:claude-opus-4-8 Reviewed-by: Pranjal Shrivastava <praan@google.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd_vdevice_alloc_ioctl() adds the vDEVICE to the viommu->vdevs xarray
with xa_cmpxchg() before the driver's vdevice_init() op runs. That op is
where a driver validates the device and may reject it, but the xarray entry
is already live by then: a concurrent IOMMU_HWPT_INVALIDATE can look it up
with iommufd_viommu_find_dev() and run the driver invalidation path against
a device that vdevice_init() would have refused.
Reserve the index with xa_insert(): it stores a zero entry that reads back
as NULL, and returns -EBUSY on a duplicate virt_id. Run vdevice_init() and
store the vDEVICE pointer only once it succeeds. A failed vdevice_init()
releases the reservation, so lookups observe the vDEVICE only after it is
fully initialized and accepted.
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the
driver's vdevice_size against the core structure size with a WARN_ON_ONCE.
On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it
skips the mutex_unlock(), leaving the igroup lock held and deadlocking the
next vDEVICE operation on that group.
Vidya Srinivas [Thu, 18 Jun 2026 18:18:37 +0000 (23:48 +0530)]
drm/i915/display: Fix NV12 ceiling division for bigjoiner case
Commit 16df4cc63c58 ("drm/i915/display: Use ceiling division for NV12
UV surface offset calculation") computes the UV (chroma) surface
start/size as ceiling(half of Y plane start/size) directly from the
U16.16 fixed-point source rectangle:
x = fp_16_16_to_int_ceil(fp_16_16_div2(src.x1));
For a single pipe the source coordinates are integers, so this is
correct.
(UV start = ceiling(half of Y plane start)).
With bigjoiner + a plane scaler the picture changes. The pipe boundary
is a fixed integer destination pixel, but the plane's position and the
scaler ratio are arbitrary, so drm_rect_clip_scaled() maps the seam back
to a *fractional* per-pipe source. For a 1280->2407 upscaled NV12 plane
crossing the seam:
The luma path floors this to an integer (src.x1 >> 16 = 640), but the
UV path takes ceiling(640.265884 / 2) = ceil(320.13) = 321. The Y plane
then starts at column 640 while the UV plane starts at 321*2 = 642,
pushing the chroma read one column past the 640-wide chroma surface on
the joiner secondary:
The spec "Y plane start" is the integer pixel the luma surface actually
programs (640), not the pre-floor fixed-point value (640.27). Convert
the Y plane start/size to integer first - matching skl_check_main_surface()
- and then apply the ceiling. This is a no-op for the integer (non-joiner)
case and yields the correct, in-bounds chroma offset for the fractional
joiner seam:
Qingwei Hu [Tue, 7 Jul 2026 12:25:48 +0000 (20:25 +0800)]
RISC-V: KVM: Inject instruction access fault on unmapped guest fetch
When an instruction guest-page-fault targets a GPA that is not backed
by any memslot, KVM has no MMIO emulation path for the fetch. Load and
store guest-page faults can be routed through MMIO emulation, but an
instruction fetch has no data payload or access size for userspace to
complete in the same way.
Treat this case as an architectural access fault in the guest. On bare
metal, fetching from an inaccessible physical address raises an
instruction access fault for the supervisor to handle through its trap
vector. Reflect EXC_INST_ACCESS back to the guest so the guest observes
the same class of exception rather than leaving the fetch as a
host-handled condition.
stval contains the virtual address of the portion of the instruction that
caused the fault, while sepc points to the beginning of the instruction.
spi: cadence-quadspi: Fix indirect write timeout when DMA read mode is enabled
When use_dma_read is enabled, the IRQ handler unconditionally overwrites
irq_status with the return value of get_dma_status(). For write operations,
DMA status returns 0 since no DMA read is in progress, causing irq_status
to become 0. The subsequent completion signal is never triggered and the
write operation times out with -ETIMEDOUT:
Fix this by separating the DMA completion path from the write interrupt
path. If get_dma_status() indicates DMA read completion, signal completion
and return immediately. Otherwise, preserve the original irq_status so that
write completion interrupts are correctly recognized and signalled.
Fixes: aac733a96636 ("spi: cadence-qspi: Fix style and improve readability") Signed-off-by: Srikanth Boyapally <srikanth.boyapally@amd.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20260708045148.2993313-1-srikanth.boyapally@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS2781 firmware parser reads several variable-length description
strings with strlen() before checking that the string terminator is
present inside the firmware blob. A malformed firmware image without a
NUL terminator can therefore make the parser walk past the end of the
firmware buffer before the later size checks run.
Add a small bounded string-length helper and use it for all description
fields that are parsed from the firmware buffer. Keep the existing size
checks for the fixed bytes that follow each string.
Wang YuWei [Mon, 6 Jul 2026 03:33:13 +0000 (11:33 +0800)]
spi: dw-dma: Wait for controller idle before completing Tx
dw_spi_dma_wait_tx_done() polls dw_spi_dma_tx_busy(), which only checks
DW_SPI_SR_TF_EMPT. An empty TX FIFO merely means the last data word has
been moved into the shift register; the transfer is not complete on the
bus until DW_SPI_SR_BUSY is also cleared. As a result the wait can
return while the controller is still shifting out the final word.
Any caller that tears down or reconfigures the controller right after
the transfer can then lose the tail of the transfer.
The memory-operation path in spi-dw-core.c already waits for both
DW_SPI_SR_BUSY == 0 and DW_SPI_SR_TF_EMPT == 1. Use the same completion
condition in the DMA path so the transfer is guaranteed to be finished
on the bus before the wait returns.
Oliver Hartkopp [Thu, 7 May 2026 08:22:23 +0000 (10:22 +0200)]
can: raw: add locking for raw flags bitfield
With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in
struct raw_sock") the formerly separate integer values have been integrated
into a single bitfield. This led to a read-modify-write operation when
changing a flag in raw_setsockopt() which now needs a locking to prevent
concurrent access.
Instead of adding a lock/unlock hell in each of the flag manipulations this
patch introduces a wrapper for a new raw_setsockopt_locked() function
analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c
Fixes: 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") Reported-by: Eulgyu Kim <eulgyukim@snu.ac.kr> Closes: https://lore.kernel.org/linux-can/20260503112200.22727-1-eulgyukim@snu.ac.kr/ Tested-by: Eulgyu Kim <eulgyukim@snu.ac.kr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Vincent Mailhol <mailhol@kernel.org> Tested-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20260504111928.41856-1-socketcan@hartkopp.net
[mkl: use Closes tag instead of Link] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ALSA: seq: close a re-opened queue timer in the destructor
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop()
is a no-op, because running was cleared first. So it frees q->timer with the
instance still live. The queue is freed next.
The instance stays on the global timer with callback_data pointing at the
freed queue. A non-owner START on the unlocked queue arms it. The next tick
derefs the freed queue in snd_seq_timer_interrupt().
Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and
no queue ownership required.
Close any lingering instance in the destructor. There, ->timeri can no
longer change: the queue is unlinked and all use_lock borrowers have
drained, so no snd_seq_queue_use() can re-open it. Close it before clearing
q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt()
to finish, and that callback still reads q->timer (via snd_seq_check_queue()),
so q->timer must stay valid until it drains.
Darrick J. Wong [Tue, 14 Jul 2026 06:07:30 +0000 (23:07 -0700)]
xfs: don't zap bmbt forks if they are MAXLEVELS tall
LOLLM noticed a discrepancy between the bmbt level checks in the libxfs
bmbt code vs. the inode repair code. We do actually allow a bmbt root
that proclaims to have a height of XFS_BM_MAXLEVELS.
Cc: stable@vger.kernel.org # v6.8 Fixes: e744cef2060559 ("xfs: zap broken inode forks") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Assisted-by: LOLLM # finding obvious bugs Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Darrick J. Wong [Tue, 14 Jul 2026 06:06:59 +0000 (23:06 -0700)]
xfs: fully check the parent handle when it points to the rootdir
LOLLM noticed that the directory tree path checking declares the path to
be ok if the inumber in the parent pointer reaches the root directory.
Unfortunately, it neglects to check that the generation is correct. Fix
that by moving the generation check up.
Cc: stable@vger.kernel.org # v6.10 Fixes: 928b721a11789a ("xfs: teach online scrub to find directory tree structure problems") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Assisted-by: LOLLM # finding obvious bugs Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Darrick J. Wong [Tue, 14 Jul 2026 06:06:43 +0000 (23:06 -0700)]
xfs: handle non-inode owners for rtrmap record checking
LOLLM noticed that two helper functions in the rtrmapbt scrub code don't
actually handle non-inode owners correctly -- CoW staging extents and
rgsuperblock extents are not shareable, but they are mergeable. Fix
these two helpers.
Cc: stable@vger.kernel.org # v6.14 Fixes: 2d9a3e98053e8c ("xfs: allow overlapping rtrmapbt records for shared data extents") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Assisted-by: LOLLM # finding obvious bugs Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Darrick J. Wong [Tue, 14 Jul 2026 06:06:12 +0000 (23:06 -0700)]
xfs: set xfarray killable sort correctly
LOLLM noticed that we *disable* interruptible sorts when the KILLABLE
flag is set. This is backwards. Fix the incorrect logic, and rename
the variable to make the connection more obvious.
Cc: stable@vger.kernel.org # v6.10 Fixes: 271557de7cbfde ("xfs: reduce the rate of cond_resched calls inside scrub") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Assisted-by: LOLLM # finding obvious bugs Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Darrick J. Wong [Tue, 14 Jul 2026 06:05:57 +0000 (23:05 -0700)]
xfs: grab rtrmap btree when checking rgsuper
LOLLM noticed that we aren't grabbing the rtrmap btree when we check the
realtime group superblock. As a result, none of the cross-referencing
checks have ever run. Fix this.
Cc: stable@vger.kernel.org # v6.14 Fixes: 428e4884656db9 ("xfs: allow queued realtime intents to drain before scrubbing") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Assisted-by: LOLLM # finding obvious bugs Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
projects / thirdparty / kernel / linux.git / log
