NFS: Charge unstable writes by request size, not folio size
nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and
uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per
*request* added to or removed from a commit list. This is correct only
when a folio has a single associated request. When pg_test splits a
folio into N sub-folio requests (e.g. pNFS flexfiles striping with a
stripe unit smaller than the folio size, or plain wsize-limited
splitting), each of the N requests independently charges the whole
folio's page count, inflating the accounting by a factor of N per
folio. With large folios and small stripe units this reaches multiple
orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can
charge up to 512x its real size, pushing global dirty+writeback
accounting past the system's dirty threshold and forcing every
buffered writer on the host into the hard-throttle path, including
unrelated in-kernel NFS server threads sharing the box.
Charge each request only for the pages it actually covers.
Fixes: 0c493b5cf16e ("NFS: Convert buffered writes to use folios") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com> Assisted-By: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
NFSv4: include MAY_WRITE in open permission mask for O_TRUNC
POSIX requires write permission to truncate a file, so an open() that
specifies O_TRUNC must be authorized for write access regardless of the
O_ACCMODE access mode.
nfs_open_permission_mask() builds the access mask passed to
nfs_may_open(), which is the local authorization gate for OPENs the
client serves itself from a cached write delegation via the
can_open_delegated() path in nfs4_try_open_cached(). The mask is
derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a
file the caller cannot write requests only MAY_READ and passes the
local check. The OPEN is then satisfied locally and the truncation is
issued to the server as a SETATTR(size=0) over the delegation stateid,
which the server accepts under standard write-delegation semantics.
POSIX requires that this open fail with EACCES.
Include MAY_WRITE in the mask whenever O_TRUNC is set so the local
check matches the access the server would have enforced.
Suggested-by: Trond Myklebust <trondmy@kernel.org> Fixes: af22f94ae02a ("NFSv4: Simplify _nfs4_do_access()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Finite-slice EXT tasks need the periodic scheduler tick to expire their
slices even when nohz_full is enabled.
Add a regression test that selects a nohz_full CPU and exercises both
infinite-to-finite and finite-to-finite slice transitions across an idle
interval. For each finite task, verify that its ops.tick() callback is
invoked.
Skip the test when an allowed nohz_full CPU and a separate housekeeping
CPU are not available.
Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Andrea Righi [Wed, 8 Jul 2026 07:46:48 +0000 (09:46 +0200)]
sched_ext: Enable tick for finite slices on nohz_full
set_next_task_scx() updates the tick dependency before __schedule()
updates rq->curr. When switching from a non-EXT task, such as idle, to
an EXT task with a finite slice, sched_update_tick_dependency() checks
the outgoing task and can allow the tick to remain stopped.
The dependency can also be lost without a slice-type transition. After a
finite-slice task leaves the CPU idle, the enqueue path can clear the
dependency against the idle rq->curr. SCX_RQ_CAN_STOP_TICK still records
a finite slice, so another finite task skips the transition block and
can run without the ticks needed to expire its slice.
The reverse mismatch can also happen when the last finite-slice EXT task
is dequeued: sub_nr_running() updates the dependency before rq->curr
changes, so the outgoing task state can keep the dependency set after
the CPU goes idle.
Fix this by unconditionally enabling the scheduler tick whenever a
finite-slice EXT task is selected on a nohz_full CPU. Moreover, when the
last runnable EXT task leaves, ignore the outgoing EXT slice state so
the generic scheduler can correctly re-evaluate and clear the tick
dependency.
audit: fix potential integer overflow in audit_log_n_hex()
The function calculates new_len as len << 1 for hex encoding. This
has two overflow risks: the shift itself can overflow when len is
large, and the result can be truncated when assigned to new_len
(declared as int) from the size_t calculation.
Fix by using check_shl_overflow() to catch shift overflow and
changing new_len and loop counter i to size_t to prevent truncation.
Cc: stable@vger.kernel.org Fixes: 168b7173959f ("AUDIT: Clean up logging of untrusted strings") Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
[PM: remove vertical whitspace noise] Signed-off-by: Paul Moore <paul@paul-moore.com>
Andrea Righi [Wed, 8 Jul 2026 08:43:27 +0000 (10:43 +0200)]
sched_ext: Preserve rq tracking across local DSQ dispatch
dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while
ops.dispatch() has recorded the current rq. Moving a task to a local DSQ
may switch to the source or destination rq before synchronously invoking
ops.dequeue() through the following path:
The nested callback saves the recorded rq and restores it on return. If
the rq tracking does not follow the lock switch, update_locked_rq() can
trigger the following lockdep assertion while restoring an rq which is
no longer held:
Introduce switch_rq_lock() to update the tracking state together with
each rq lock handoff. Use it in dispatch_to_local_dsq(),
move_remote_task_to_local_dsq() and the in-balance paths of
scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the
rq whose lock is actually held throughout the lock dance.
Fixes: 7fb39e4eb4c3 ("sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP") Cc: stable@vger.kernel.org # 7.1+ Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Chuck Lever [Mon, 4 May 2026 10:28:19 +0000 (06:28 -0400)]
SUNRPC: pin upper rpc_clnt across the TLS connect_worker
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction.
Reported-by: Michael Nemanov <michael.nemanov@vastdata.com> Closes: https://lore.kernel.org/linux-nfs/40e3d522-dfcf-4fc1-9c55-b5e81f1536d5@vastdata.com/ Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Michael Nemanov <michael.nemanov@vastdata.com> Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com> Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Chuck Lever [Mon, 4 May 2026 10:28:18 +0000 (06:28 -0400)]
SUNRPC: release lower rpc_clnt if killed waiting for XPRT_LOCKED
xs_tcp_tls_setup_socket() creates a temporary "lower" rpc_clnt with
rpc_create() to drive the inner TLS handshake, then waits for
XPRT_LOCKED on its xprt with TASK_KILLABLE so a stuck handshake can
be aborted by signal. When the wait is interrupted, the function
jumps to out_unlock without releasing lower_clnt. The success path
and the out_close error path both call
rpc_shutdown_client(lower_clnt); only the killed-wait path skips it,
leaking the clnt and its underlying xprt.
Call rpc_shutdown_client() on this path before joining out_unlock.
xprt_release_write() is not needed here because XPRT_LOCKED was
never acquired.
Fixes: 26e8bfa30dac ("SUNRPC/TLS: Lock the lower_xprt during the tls handshake") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Michael Nemanov <michael.nemanov@vastdata.com> Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com> Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
KVM: nVMX: Don't use vmcs01.GUEST_CR3 to snapshot L1's CR3 when EPT is disabled
Add a dedicated field in "struct nested_vmx" to track L1's pre-VM-Enter CR3
instead of using vmcs01.GUEST_CR3, which isn't anywhere near as safe as the
comment purports it to be. E.g. in addition to the warn_on_missed_cc bug
(that was fixed by relocating the consistency check), if getting vmcs12
pages (during actual nested VM-Entry) fails and EPT is disabled (in KVM),
KVM will return control to userspace with vmcs01.GUEST_CR3 holding a guest-
controlled value.
Alternatively, KVM could force a reload of vmcs01.GUEST_CR3 by resetting
the MMU context in the error path, but as above, the safety of the vmcs01
approach is extremely questionable, e.g. it took all of ~4 months for the
code to break.
KVM: nVMX: Move vTPR vs. TPR Threshold consistency check into "normal" checks
Move the off-by-default consistency check for vmcs12.tpr_threshold vs.
the virtual APIC vTPR into the "normal" controls checks, as waiting until
KVM has loaded some amount of state is unnecessary and actively dangerous.
Specifically, failure to unwind vmcs01.GUEST_CR3 to KVM's value when EPT
is disabled results in KVM running L1 with an L1-controlled CR3, not with
KVM's CR3!
Alternatively, KVM could simply reset the MMU to force a reload of
vmcs01.GUEST_CR3, but the _only_ reason the check was shoved into a "late"
flow was to wait until the vmcs12 pages were retrieved. Rather than build
up more crusty code, simply access vTPR using a regular guest memory access
(performance isn't a concern). To circumvent the restrictions that led to
KVM deferring nested_get_vmcs12_pages(), (a) use a VM-scoped API to read
guest memory so that it always hits non-SMM memslots (for RSM), and (b)
skip the check (since its off-by-default anyways) when the vCPU doesn't
want to run, i.e. when userspace is restoring/stuffing state.
If reading guest memory fails, simply skip the consistency check, as KVM's
de facto ABI is that VMX instruction accesses to non-existent memory get
PCI Bus Error semantics, where reads return 0xFFs. And if vTPR=0xFF, then
the vTPR is guaranteed to be greater than or equal to TPR_THRESHOLD.
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
Hui Wang [Tue, 7 Jul 2026 08:23:48 +0000 (16:23 +0800)]
selftests/rseq: Fix a building error for riscv arch
RISC-V rseq selftests include asm/fence.h from tools/arch/riscv,
but the rseq Makefile only adds tools/include in the CFLAGS, this
results in the building failure both for native and cross build:
In file included from rseq.h:131,
from rseq.c:37:
rseq-riscv.h:11:10: fatal error: asm/fence.h: No such file or directory
To fix it, add the matching tools/arch/$(ARCH)/include path in the
CFLAGS and derive ARCH from SUBARCH for standalone native builds where
ARCH is not set.
Fixes: c92786e179e0 ("KVM: riscv: selftests: Use the existing RISCV_FENCE macro in `rseq-riscv.h`") Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://patch.msgid.link/20260707082348.36896-1-hui.wang@canonical.com Signed-off-by: Paul Walmsley <pjw@kernel.org>
leixiang [Mon, 22 Jun 2026 07:51:01 +0000 (15:51 +0800)]
KVM: x86: Nullify irqfd->producer if updating IRTE for bypass fails
Nullify irqfd->producer if updating the IRTE for bypass fails, as leaving a
dangling pointer will result in a use-after-free if the irqfd is reachable
through KVM's routing, but the producer is freed separately. E.g. for VFIO
PCI, the producer is embedded in struct "vfio_pci_irq_ctx" and freed when
the vector is disabled, which can happen independent of routing updates.
Fixes: 77e1b8332d1d ("KVM: x86: Decouple device assignment from IRQ bypass") Cc: stable@vger.kernel.org Signed-off-by: leixiang <leixiang@kylinos.cn> Link: https://patch.msgid.link/1782119051448443.14545.seg@mailgw.kylinos.cn
[sean: drop PPC change, massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com>
Shengming Hu [Mon, 6 Jul 2026 13:39:09 +0000 (21:39 +0800)]
mm/slub: fix lost local objects when bulk remote free batch fills
In free_to_pcs_bulk(), when remote_objects[] fills to PCS_BATCH_MAX,
the code jumps to flush_remote to free the batch. If all remote entries
have already been compacted out of p[] via tail swaps while local objects
remain, the flush_remote path returns early since `i < size` no longer
holds. The leftover local objects are then neither cached in the sheaf
nor returned to the slab freelist, causing a memory leak.
For illustration:
size = 64, local objects at p[0..31], remote objects at p[32..63]
After scanning all remotes: i = 32, size = 32
p[0..31] local objects are dropped.
Harry pointed out that, although the logic contains a real leak, it does
not appear to be triggerable with the current in-tree users. To hit this
path, at least PCS_BATCH_MAX objects, currently hardcoded to 32, need to
be collected in remote_objects[]. Looking at current kmem_cache_free_bulk()
users:
* maple_node has sheaf_capacity = 32
* skbuff_head_cache has sheaf_capacity = 28
* panthor and msm drivers have sheaf_capacity = 4
The sheaf capacity is, at least for now, derived purely from the object
size, with the user-requested capacity used as a minimum. Therefore, among
the current users, only maple_node has a sheaf_capacity large enough to
reach PCS_BATCH_MAX.
However, for the bug to trigger in maple_node, all objects in the sheaf
would have to be from remote nodes. In that case, there would be no local
objects left to leak. So this issue was found by code review rather than
from a runtime report, and it does not seem to be triggerable by current
users.
Still, the bug could become reachable with future users, a different sheaf
capacity, or a change to PCS_BATCH_MAX. Fix the logic by freeing a full
remote batch in place during the scan and then continuing to process the
compacted array. This keeps all local objects on the normal fast path,
while the tail path only handles any leftover partial remote batch. The
redundant next_remote_batch jump label is removed as well.
Fixes: 989b09b73978 ("slab: skip percpu sheaves for remote object freeing") Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn> Link: https://patch.msgid.link/202607062139095043SOsLi6TIf403tcjPf8fm@zte.com.cn Cc: stable@vger.kernel.org Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org> Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Merge tag 'hid-for-linus-2026070801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- OOB, UAF, NULL-deref fixes in core and picolcd, logitech, letsketch,
appleir and multitouch drivers (Georgiy Osokin, HyeongJun An, Lee
Jones, Manish Khadka, Maoyi Xie and Trung Nguyen)
- fix for integer wraparound (and corresponding regression selftest) in
hid-bpf (Yiyang Chen)
* tag 'hid-for-linus-2026070801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: multitouch: test a large ContactCountMaximum
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
selftests/hid: Cover hid_bpf_get_data() size overflow
selftests/hid: Load only requested struct_ops maps
HID: bpf: Fix hid_bpf_get_data() range check
HID: lg-g15: cancel pending work on remove to fix a use-after-free
HID: logitech-dj: Fix maxfield check in DJ short report validation
HID: core: Fix OOB read in hid_get_report for numbered reports
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
HID: appleir: fix UAF on pending key_up_timer in remove()
HID: letsketch: fix UAF on inrange_timer at driver unbind
Cen Zhang [Thu, 18 Jun 2026 12:40:29 +0000 (20:40 +0800)]
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
The deduplication logic appears to cause issues with separate
SBU muxes. The mode-switch call on these (like gpio-sbu-mux)
never appeared, so no successful mode-switch happened. The more
high-end Parade PS883X redrivers are not affected due to being
retimer-switch. The revert fixes dp altmode mode-switch for both.
Tested on:
Lenovo Thinkbook 16 G7 QOY
Lenovo Ideapad 5 2in1 14Q8X9
Microsoft Windows Dev Kit 2023 (Blackrock)
Lenovo Thinkpad T14s G6
Peng Fan [Wed, 10 Jun 2026 14:39:11 +0000 (22:39 +0800)]
pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
Peng Fan [Wed, 10 Jun 2026 14:39:10 +0000 (22:39 +0800)]
pmdomain: imx: Fix i.MX8MP power notifier
Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
imx8mp_vpu_power_notifier() for i.MX8MP.
Fixes: a1a5f15f7f6cb ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl") Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Guangshuo Li [Wed, 8 Jul 2026 11:27:10 +0000 (19:27 +0800)]
cifs: validate DFS referral string offsets
parse_dfs_referrals() validates that the response header and referral
array fit in the received buffer, but each referral also contains string
offsets supplied by the server.
Those offsets are used to compute the DfsPath and NetworkAddress string
pointers without checking whether they still point inside the response
buffer. A malformed referral can therefore make the computed pointer
exceed the end of the buffer. The resulting negative max_len is then
passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it
to kstrndup() as a size_t, allowing strnlen() to read out of bounds.
Validate each string offset before deriving the string pointer.
Fixes: 4ecce920e13a ("CIFS: move DFS response parsing out of SMB1 code") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: client: use GFP_KERNEL for DFS cache allocations
In dfs_cache.c, the helper functions alloc_target(), setup_referral(),
and update_cache_entry_locked() currently utilize GFP_ATOMIC to
allocate memory.
However, all of these functions are executed in sleepable conditions.
Use GFP_KERNEL instead, to reduce the risk of allocation failure and
stop putting unnecessary pressure on emergency memory pools in
low-memory scenarios.
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Guoniu Zhou [Tue, 9 Jun 2026 06:26:41 +0000 (14:26 +0800)]
pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use.
Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver") Cc: stable@vger.kernel.org Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Gerald Schaefer [Tue, 30 Jun 2026 17:32:14 +0000 (19:32 +0200)]
s390/mm: Fix type mismatch in get_align_mask().
Commit 86f48f922ba79 ("s390/mmap: disable mmap alignment when
randomize_va_space = 0") introduced get_align_mask() with return type of
'int', while the target field 'info.align_mask' in struct
vm_unmapped_area_info is 'unsigned long'.
With currently used masks, this should not cause truncation issues, but
fix it and return 'unsigned long' to avoid future problems.
`iio_event_getfd()` creates the event file descriptor with
`anon_inode_getfd()`, which allocates a new fd, creates the anonymous
file and installs it in the process fd table before returning to the
caller.
The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,
but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.
But since fd tables are shared between threads, another thread can guess
the newly allocated fd number and issue a `read()` on it as soon as the fd
has been installed.
This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in
parallel with the `kfifo_reset_out()` in `iio_event_getfd()`.
The kfifo documentation says that `kfifo_reset_out()` is only safe when it
is called from the reader thread and there is only one concurrent reader.
Otherwise it is dangerous and must be handled in the same way as
`kfifo_reset()`.
If that happens, `kfifo_to_user()` can advance the FIFO `out` index based
on state from before the reset, after the reset has already moved the `out`
index to the current `in` index. That can leave the FIFO with an `out`
index past the `in` index. A later `read()` can then see an underflowed
FIFO length and copy more data than the event FIFO buffer contains. This
can result in an out-of-bounds read and leak adjacent kernel memory to
userspace.
Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is
marked busy, but the new fd has not been installed yet, so userspace cannot
access it while the FIFO is reset.
Alan Stern [Tue, 9 Jun 2026 17:37:36 +0000 (13:37 -0400)]
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com> Closes: https://lore.kernel.org/linux-usb/20EC9664-054E-438B-B411-2145D347F97B@gmail.com/ Tested-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 66e3e591891d ("usb: Add driver for Altus Metrum ChaosKey device (v2)") Cc: stable <stable@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/bb5b1dc6-eb59-43e1-8d26-51e658e88bbe@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wayen Yan [Wed, 8 Jul 2026 02:41:54 +0000 (10:41 +0800)]
watchdog: airoha: Prevent division by zero when clock frequency is zero
clk_get_rate() can return 0 when the clock provider is not properly
configured or the clock is unmanaged. The driver uses wdt_freq as a
divisor directly in airoha_wdt_probe() to compute max_timeout and in
airoha_wdt_get_timeleft() to compute the remaining time, which results
in a division by zero.
Add a check for wdt_freq == 0 in probe and return -EINVAL with
dev_err_probe() to prevent the division by zero and provide a
diagnostic message.
watchdog: pretimeout: Fix UAF in watchdog_unregister_governor()
When a watchdog governor is unregistered, it updates existing watchdog
devices that were using this governor by falling back to `default_gov`.
If the governor being unregistered is currently set as `default_gov`,
the `default_gov` is never cleared. This leads to 2 use-after-free
issues:
1. New watchdog devices registered after this point will inherit the
dangling `default_gov`.
2. Existing watchdog devices using the unregistered governor will have
their `wdd->gov` reassigned to the dangling `default_gov`.
Fix the UAF by clearing `default_gov` if it matches the governor being
unregistered.
ipvs: ensure inner headers in ICMP errors are in headroom
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers.
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset.
Fixes: 2906f66a5682 ("ipvs: SCTP Trasport Loadbalancing Support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/20260705123040.35755-1-zhaoyz24@mails.tsinghua.edu.cn/ Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Assisted-by: Claude Code:GLM-5.2 Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
ipvs: use parsed transport offset in TCP state lookup
TCP state handling reparses the skb to find the TCP header. For IPv6 it
uses sizeof(struct ipv6hdr), while the surrounding IPVS code already
parsed the packet with ip_vs_fill_iph_skb() and has the real
transport-header offset in iph.len.
This makes TCP state handling look at the wrong bytes when an IPv6
packet carries extension headers. Use the parsed transport offset passed
down from ip_vs_set_state() when reading the TCP header.
For IPv4 and for IPv6 packets without extension headers, the passed
offset matches the previous value.
Fixes: 0bbdd42b7efa6 ("IPVS: Extend protocol DNAT/SNAT and state handlers") Link: https://lore.kernel.org/netdev/20260705125659.37744-1-zhaoyz24@mails.tsinghua.edu.cn/ Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Assisted-by: Claude Code:GLM-5.2 Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
ipvs: pass parsed transport offset to state handlers
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set.
Fixes: 65249feb6b3d ("net: add support for skbs with unreadable frags") Cc: stable@vger.kernel.org Acked-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: flowtable: support IPIP tunnel with direct xmit
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>.
Fixes: d30301ba4b07 ("netfilter: flowtable: Add IPIP tx sw acceleration") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn> Reported-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.
netfilter: flowtable: use dst in this direction when pushing IPIP header
When pushing the IPIP header, the route of the other direction is used
to calculate the headroom, use the route in this direction. Accessing
the other tuple to set the IP source and destination is fine because
this tuple does not provide such information to avoid storing redundant
information. However, this tuple already provides the dst for this
direction, this went unnoticed because this bug affects headroom and
iph->frag_off only at this stage.
netfilter: ipset: allocate the proper memory for the generic hash structure
Because a single create function is emitted for every hash type,
from the IPv4 and IPv6 generic hash structure definitions the last
one, i.e. the IPv6 was in effect for IPv4 too. Use the proper size
when allocating the structure. Comment properly that because create()
refers to elements of the generic hash structure, all referred ones
must come before the IPv4/IPv6 dependent 'next' member.
netfilter: ipset: cleanup the add/del backlog when resize failed
Sashiko pointed out that the add/del backlog was not cleaned up
when resize failed. Fix it in the corresponding error path. Also,
make sure that the add/del backlog is htable-specific so when
resize creates a new htable, old/new backlog can't be mixed up.
netfilter: ipset: exclude gc when resize is in progress
Zhengchuan Liang and Eulgyu Kim reported that because resize
does not copy the comment extension into the resized set but
uses it's pointer, ongoing gc can free the extension in the
original set which then results stale pointer in the resized
one. The proposed patch was to recreate the extensions for
every element in the resized set. It is both expensive and
wastes memory, so better exclude gc when resizing in progress
detected: resizing will destroy the original set anyway,
so doing gc on it is unnecessary.
Introduce a new spinlock to exclude parallel gc and resize.
Because we just set and check a bool value, there's no need
for the parameter to be atomic_t and rename it for better
readability.
Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported by: Eulgyu Kim <eulgyukim@snu.ac.kr> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock.
netfilter: nft_lookup: fix catchall element handling with inverted lookups
nft_lookup_eval() decides whether a lookup matched (`found`) from the
direct set lookup and priv->invert before falling back to the
catchall element used by interval sets (e.g. nft_set_rbtree) for the
open-ended default range. Since `found` is never recomputed after
`ext` is replaced by the catchall lookup, inverted lookups
(NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the
catchall element, producing the wrong verdict. Fold the catchall
lookup into `ext` before computing `found`, matching the order
already used by nft_objref_map_eval().
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support") Signed-off-by: Tamaki Yanagawa <ty@000ty.net> Assisted-by: Claude:claude-sonnet-5 Signed-off-by: Florian Westphal <fw@strlen.de>
selftests/user_events: Wait for deferred event teardown after unregister
Unregistering a user event now defers the drop of the enabler's event
reference (and the freeing of the enabler) past an RCU grace period. As a
result DIAG_IOCSDEL can transiently fail with -EBUSY while that last
reference is still being dropped, where it previously succeeded
immediately.
Two tests assumed the delete takes effect the instant the unregister
returns:
- abi_test "flags" deletes the event right after disabling it.
- perf_test's fixture teardown clear() deletes __test_event before the
next test registers the same name; a stale event makes the following
registration fail with -EADDRINUSE.
Retry the delete until it succeeds (or the event is already gone) with a
bounded wait, matching the existing wait_for_delete() idiom in the same
suite, so the tests are robust to the deferred teardown.
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place.
Xiang Mei [Sun, 5 Jul 2026 21:58:00 +0000 (14:58 -0700)]
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy.
Xiang Mei [Sun, 5 Jul 2026 23:36:29 +0000 (16:36 -0700)]
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6
fragment header and then unconditionally advances skb->mac_header:
skb->mac_header += sizeof(struct frag_hdr);
On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header
yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding
sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7),
after which skb_mac_header_was_set() wrongly reports a MAC header is
present and skb_mac_header() points into the headroom.
The reassembler has done this unconditional add since it was introduced;
it was harmless while mac_header was a bare pointer, but wrong once
mac_header became a u16 offset whose unset state is the ~0U sentinel
tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c
does the same relocation and does guard the adjustment; mirror the
guard here.
smb: client: restrict implied bcc[0] exemption to responses without data area
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the received buffer, so the response must be rejected.
Fixes: 093b2bdad322 ("CIFS: Make demultiplex_thread work with SMB2 code") Cc: stable@vger.kernel.org Signed-off-by: Shoichiro Miyamoto <shoichiro.miyamoto@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
xfs: use xfs_csn_t for xlog_cil_push_now() push_seq parameter
The push_seq argument to xlog_cil_push_now() carries a CIL checkpoint
sequence number, not a log sequence number (LSN).
Change the parameter type from xfs_lsn_t to xfs_csn_t to correctly
reflect its semantics and match the surrounding types. Both types are
int64_t under the hood, so this is a type-annotation fix with no
behavioural change.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
The zoned sysfs directory is currently registered as part of the generic
per-mount sysfs setup, but the data exposed by nr_open_zones has a
narrower lifetime. mp->m_zone_info is allocated by xfs_mount_zones() and
freed by xfs_unmount_zones(), while the zoned sysfs kobject remained
registered until xfs_mount_sysfs_del().
A read of nr_open_zones can therefore enter through the still-live sysfs
kobject after xfs_unmount_zones() has freed mp->m_zone_info, leading to a
use-after-free in nr_open_zones_show().
Make the zoned sysfs lifetime match the zone-info lifetime inside the zone
allocator. Create the zoned sysfs directory from xfs_mount_zones() after
the zone allocator has finished setting up, and remove it as the first
step of xfs_unmount_zones(), before any zone allocator teardown can free
m_zone_info.
Sysfs removal deactivates the kernfs nodes and waits for active callbacks
to drain before returning, so this also protects a reader that has already
entered nr_open_zones_show() but has not yet dereferenced m_zone_info.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in nr_open_zones_show+0x86/0x90
The buggy address belongs to the object at ffff88810b177800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 160 bytes inside of freed 1024-byte region
[ffff88810b177800, ffff88810b177c00)
Read of size 4
Call trace:
print_report+0xcd/0x620
nr_open_zones_show+0x86/0x90 (fs/xfs/xfs_sysfs.c:724)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x20c/0x410
kasan_report+0xdd/0x110
sysfs_kf_seq_show+0x1bd/0x380
seq_read_iter+0x40f/0x11b0
lock_release+0xba/0x260
mark_held_locks+0x40/0x70
vfs_read+0x717/0xce0
__up_read+0x319/0x900
ksys_read+0xf8/0x1c0
do_user_addr_fault+0x3d0/0xbc0
trace_hardirqs_on_prepare+0x23/0xf0
do_syscall_64+0xc8/0x530 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_cache_noprof+0x205/0x460
xfs_mount_zones+0x34c/0x2650
xfs_mountfs+0x1b97/0x1eb0
xfs_fs_fill_super+0xf2b/0x18a0
get_tree_bdev_flags+0x310/0x590
vfs_get_tree+0x8d/0x2e0
__x64_sys_fsconfig+0x61c/0xbc0
do_syscall_64+0xc8/0x530 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x20e/0x4c0
xfs_unmountfs+0x2fd/0x390
xfs_fs_put_super+0x60/0x110
generic_shutdown_super+0x143/0x4b0
kill_block_super+0x3b/0x90
xfs_kill_sb+0x12/0x50
deactivate_locked_super+0xa7/0x160
cleanup_mnt+0x218/0x420
task_work_run+0x11a/0x1f0
exit_to_user_mode_loop+0x13c/0x4f0
do_syscall_64+0x4a9/0x530 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Fixes: 62c89988dc19 ("xfs: expose the number of open zones in sysfs") Assisted-by: Codex:gpt-5.5 Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Weiming Shi [Thu, 2 Jul 2026 16:20:00 +0000 (09:20 -0700)]
xfs: fail recovery on a committed log item with no regions
If the first op of a transaction is a bare transaction header
(len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans()
adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and
ri_buf == NULL.
The header can be split across op records, so later ops may still add
regions; the item is only invalid if the transaction commits with none.
The runtime commit path never emits such a transaction, so this only
happens on a crafted log. It came from an AI-assisted code audit of the
recovery parser.
xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads
*(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL
ri_buf. Reject it there, before the commit handlers that also read
ri_buf[0].
m68k: coldfire: fix breakage of missed IO access updates
Commit e1f3a00670d1 ("m68k: coldfire: use ColdFire specifc IO access in
SoC code") incorrectly updated a couple of local IO access uses. They
use "read8" when they should be using the new "mcf_read8". Fix them.
This causes compile time breakage for two specific SoC types, the ColdFire
5235 and 5282. They got missed in original testing due to not having
any defconfigs for these specific parts.
Fixes: e1f3a00670d1 ("m68k: coldfire: use ColdFire specifc IO access in SoC code") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202607040536.BiSGmESw-lkp@intel.com/ Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
====================
ipv4/ipv6: Fix UAF and memory leak in IGMP/MLD
This series addresses two potential UAF vulnerabilities
and memory leaks in the IPv4 IGMP and IPv6 MLD subsystems.
The first two patches fix a UAF where the packet receive path races with
device teardown. If the device refcount has already hit 0 (but the memory
is still held by RCU), incoming IGMP/MLD packets trying to schedule delayed
work or timers would call refcount_inc() on the 0 refcount, triggering a
warning and eventually leading to a UAF when the work runs after the device
has been freed. This is fixed by introducing safe hold helpers using
refcount_inc_not_zero(). In MLD, we also ensure we only enqueue the skb
if we successfully acquired the device reference, to avoid leaking skbs
when the device is being destroyed.
The third patch fixes memory leaks in IPv4 IGMP when timers are deleted or
stopped. When a timer is deleted (in igmp_mod_timer) or stopped (in
igmp_stop_timer) and not re-armed, the code dropped the group refcount using
refcount_dec(). However, if the group was concurrently removed from the list,
this decrement could drop the refcount to 0 without triggering the
cleanup/free path, leaking the group structure. This is fixed by using
ip_ma_put() instead, and deferring the put until after the lock is released.
====================
Eric Dumazet [Sun, 5 Jul 2026 18:17:56 +0000 (18:17 +0000)]
ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer()
When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped
in igmp_stop_timer(), the code currently decrements the reference counter
of the multicast list entry @im using refcount_dec(&im->refcnt).
However, both functions can be called from the RCU reader path:
- igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu()
- igmp_stop_timer() via igmp_rcv() -> igmp_heard_report()
If the group im was concurrently removed from the list by ip_mc_dec_group(),
its reference count might have already been decremented to 1.
In this case, timer_delete() succeeds, and refcount_dec() decrements
the refcount from 1 to 0. Since refcount_dec() does not free the object
when it hits 0 (unlike ip_ma_put()), the im structure is leaked.
Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt),
and deferring the put until after the spinlock is released.
Eric Dumazet [Sun, 5 Jul 2026 18:17:55 +0000 (18:17 +0000)]
ipv6: mcast: Fix potential UAF in MLD delayed work
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Eric Dumazet [Sun, 5 Jul 2026 18:17:54 +0000 (18:17 +0000)]
ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arnd Bergmann [Thu, 18 Jun 2026 14:33:14 +0000 (16:33 +0200)]
usb: ucsi: huawei_gaokun: move typec_altmode off stack
The typec_altmode structure contains a 'struct device' object
that cannot be allocated on the stack because of its size, even
when ignoring the lifetime rules:
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead.
Myeonghun Pak [Mon, 6 Jul 2026 14:53:12 +0000 (23:53 +0900)]
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Andy Yan [Thu, 4 Jun 2026 10:50:24 +0000 (18:50 +0800)]
usb: typec: tcpm: Fix VDM type for Enter Mode commands
VDO() second parameter is VDM type (bit 15): 1 for SVDM, 0 for UVDM.
Using 'vdo ? 2 : 1' corrupts SVID low bit when vdo is non-NULL
(2 << 15 = BIT(16)). Enter Mode is always SVDM, hardcode to 1.
Fixes: 8face9aa57c8 ("usb: typec: Add parameter for the VDO to typec_altmode_enter()") Cc: stable <stable@kernel.org> Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260604105059.18750-1-andyshrk@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Menzel [Fri, 3 Jul 2026 11:07:37 +0000 (13:07 +0200)]
usb: typec: ucsi: cancel pending work on system suspend
On a Dell XPS 13 9360 (BIOS 2.21.0), entering system suspend (deep/S3)
races a pending UCSI connector-change worker against the ACPI EC teardown.
The worker evaluates the UCSI _DSM (GET_CONNECTOR_STATUS), whose AML
accesses the Embedded Controller. By that point the ACPI EC has already
been stopped for suspend, so the EC address space handler rejects the
access with AE_BAD_PARAMETER, aborting the AML and failing the connector
query:
[22314.689495] ACPI: EC: interrupt blocked
[22314.711981] ACPI: PM: Preparing to enter system sleep state S3
[22314.743260] ACPI: EC: event blocked
[22314.743265] ACPI: EC: EC stopped
[22314.743267] ACPI: PM: Saving platform NVS memory
[22314.744241] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20260408/evregion-303)
[22314.744432] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECW1 due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.744673] ACPI Error: Aborting method \ECWB due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745201] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745394] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f rev:1 func:1 (0x1001)
[22314.745414] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 1
[22314.745424] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
ucsi_acpi implements a resume callback but no suspend callback, so nothing
cancels the connector-change work before the firmware/EC is torn down.
Add a `ucsi_suspend()` core helper that cancels the pending init and
connector-change work, and wire it into ucsi_acpi's PM ops. The connector
state is re-read on resume by `ucsi_resume()`, so cancelling the work loses
nothing.
Fixes: 4e3a50293c2b ("usb: typec: ucsi: acpi: Implement resume callback") Cc: stable <stable@kernel.org> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Assisted-by: Claude Opus 4.8 Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260703110738.8457-2-pmenzel@molgen.mpg.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuangpeng Bai [Thu, 2 Jul 2026 19:13:29 +0000 (15:13 -0400)]
usb: typec: class: drop PD lookup reference
usb_power_delivery_find() wraps class_find_device_by_name(). That helper
returns a device reference that must be released by the caller.
select_usb_power_delivery_store() only needs this reference while calling
the pd_set callback. Drop it once the callback returns. Otherwise the sysfs
write can pin the selected USB Power Delivery object and prevent it from
being released on unregister.
Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners") Cc: stable <stable@kernel.org> Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com> Link: https://patch.msgid.link/20260702191329.2648043-1-shuangpeng.kernel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephan Gerhold [Mon, 1 Jun 2026 13:55:02 +0000 (15:55 +0200)]
usb: typec: ps883x: Fix DP+USB3 configuration
Commit 6bebd9b77726 ("usb: typec: ps883x: Rework ps883x_set()") introduced
two regressions:
1. The CONN_STATUS_0_USB_3_1_CONNECTED bit is mistakenly written to the
wrong configuration register (cfg1 instead of cfg0). This breaks USB3
when using USB3+DP adapters.
2. The switch-case fallthrough block is inverted: Currently,
TYPEC_DP_STATE_C (DP-only) inherits the USB3 configuration, while
TYPEC_DP_STATE_D (DP+USB3) is missing the necessary DP sink flags.
Fix these by writing the USB3 bit to the correct register and swapping the
case statement order so both states get their correct bits assigned.
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
When a USB device with active stream endpoints is disconnected,
xhci_free_streams() is called from the hub_event workqueue to
free the stream resources. It calls xhci_free_stream_info()
while holding xhci->lock with irqs disabled.
xhci_free_stream_info() invokes xhci_free_stream_ctx(), which
calls dma_free_coherent() for large stream context arrays.
dma_free_coherent() can sleep (e.g. via vunmap), triggering
a BUG when called from atomic context.
Fix this by saving the stream_info pointers and clearing the
ep references under the lock, then calling xhci_free_stream_info()
outside the lock where sleeping is allowed.
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction.
Fixes: de66754e9f80 ("xhci: sideband: add initial api to register a secondary interrupter entity") Cc: stable <stable@kernel.org> Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://patch.msgid.link/20260703144033.483286-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jimmy Hu [Thu, 25 Jun 2026 07:37:04 +0000 (15:37 +0800)]
usb: gadget: udc: Fix use-after-free in gadget_match_driver
The udc structure acts as the management structure for the gadget,
but their lifecycles are decoupled. A race condition exists where
usb_del_gadget() frees the udc memory (e.g., via mode-switch work)
while gadget_match_driver() concurrently accesses the freed udc memory
(e.g., via configfs), causing a Use-After-Free (UAF) that triggers a
NULL pointer dereference when the freed memory is zeroed:
[39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140
[39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60
...
[39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8
[39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140
[39430.931308][ T1171] configfs_write_iter+0xec/0x134
Fix this by ensuring the udc structure remains allocated until the
gadget is released. To achieve this, introduce a new
usb_gadget_release() routine to the core. When the gadget is added,
usb_add_gadget() stores the gadget's release routine in the udc
structure and takes a reference to the udc. When the gadget is
released, usb_gadget_release() drops the reference to the udc and
then calls the gadget's release routine.
Suggested-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20260625073705.803880-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Runyu Xiao [Fri, 12 Jun 2026 05:20:05 +0000 (13:20 +0800)]
usb: dwc3: run gadget disconnect from sleepable suspend context
dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window.
Myeonghun Pak [Wed, 1 Jul 2026 12:16:25 +0000 (21:16 +0900)]
usb: sl811-hcd: disable controller wakeup on remove
sl811h_probe() enables the HCD controller device as a wakeup source after
usb_add_hcd() succeeds, but sl811h_remove() removes the HCD and releases
the driver resources without disabling that wakeup source.
Disable controller wakeup after usb_remove_hcd() and before usb_put_hcd()
so the wakeup source object is detached while the controller device pointer
is still available.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 3c9740a117d4 ("usb: hcd: move controller wakeup setting initialization to individual driver") Cc: stable <stable@kernel.org> Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Link: https://patch.msgid.link/20260701121625.96815-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Myeonghun Pak [Wed, 1 Jul 2026 11:40:06 +0000 (20:40 +0900)]
usb: typec: anx7411: use devm_pm_runtime_enable()
anx7411_i2c_probe() enables runtime PM before returning successfully, but
anx7411_i2c_remove() tears down the Type-C partner state, workqueue, dummy
I2C device, mux, switch and port without disabling runtime PM.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
driver detach. Since devres action registration can fail, route that
failure through the existing probe unwind path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Cc: stable <stable@kernel.org> Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260701114006.75738-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Myeonghun Pak [Mon, 6 Jul 2026 15:10:49 +0000 (00:10 +0900)]
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 3295f1b866bf ("usb: misc: uss720: check for incompatible versions of the Belkin F5U002") Cc: stable <stable@kernel.org> Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Reviewed-by: Alex Henrie <alexhenrie24@gmail.com> Link: https://patch.msgid.link/20260706151049.63470-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed.
Dawei Feng [Tue, 30 Jun 2026 07:14:19 +0000 (15:14 +0800)]
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed.
Commit 1892bf90677a ("USB: usb-storage: Fix use of bitfields for
hardware data in ene_ub6250.c") converted the media status fields from
bitfields to bit masks.
The original ene_transport() test called ene_init() only when neither
media type was ready:
!(sd_ready || ms_ready)
The converted test became:
!sd_ready || ms_ready
This is not equivalent. Restore the original semantics by testing that
both ready bits are clear before calling ene_init().
Fixes: 1892bf90677a ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c") Cc: stable <stable@kernel.org> Signed-off-by: Xu Rao <raoxu@uniontech.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/F42641386E32404F+20260626070607.4119527-1-raoxu@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xu Rao [Fri, 26 Jun 2026 06:46:17 +0000 (14:46 +0800)]
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Sam Day [Fri, 26 Jun 2026 04:29:10 +0000 (14:29 +1000)]
usbip: vudc: fix NULL deref in vep_dequeue()
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Yichong Chen [Wed, 17 Jun 2026 02:06:13 +0000 (10:06 +0800)]
usbip: tools: support SuperSpeedPlus devices
USB devices running at SuperSpeedPlus report "10000" or "20000" in
their sysfs speed attribute. usbip currently maps only "5000" to
USB_SPEED_SUPER, so a SuperSpeedPlus device is imported as
USB_SPEED_UNKNOWN.
The attach request is then rejected by vhci_hcd:
vhci_hcd: Failed attach request for unsupported USB speed: UNKNOWN
Map the SuperSpeedPlus sysfs speed values to USB_SPEED_SUPER_PLUS, use
the SuperSpeed VHCI hub for SuperSpeedPlus devices, and recognize the
gadget current_speed string used by the kernel.
Fixes: b2316645ca5e ("usb: show speed "10000" in sysfs for USB 3.1 SuperSpeedPlus devices") Cc: stable <stable@kernel.org> Signed-off-by: Yichong Chen <chenyichong@uniontech.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/00C828F338E43447+20260617020613.199086-1-chenyichong@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Madhu M [Fri, 19 Jun 2026 15:33:11 +0000 (21:03 +0530)]
usb: typec: ucsi: Pass full DP config payload in SET_NEW_CAM for DP alt mode
In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM
command hold the 32-bit Alternate Mode Specific (AMSpecific) field.
For DisplayPort Alternate Mode, this field must contain the full
32-bit DisplayPort configuration VDO payload that the OPM wants the
connector to operate in, rather than just the pin assignment value.
This AMSpecific value follows the DisplayPort Configurations defined
in the DisplayPort Alt Mode on USB Type-C Specification v2.1a,
Table 5-13: SOP DisplayPort Configurations.
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable <stable@kernel.org> Signed-off-by: Madhu M <madhu.m@intel.com> Reviewed-by: Jameson Thies <jthies@google.com> Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown [Wed, 8 Jul 2026 11:25:21 +0000 (12:25 +0100)]
ASoC: qcom: Add Eliza audio support
Ravi Hothi <ravi.hothi@oss.qualcomm.com> says:
This series adds audio support for the Qualcomm Eliza SoC. Eliza uses
the same LPASS macro codec hardware as SM8550, so the existing SM8550
fallback compatible is reused for all four macro codecs (RX, TX, VA,
WSA). The sound card is compatible with the SM8450 generation machine
driver.
Patch 1 documents the Eliza LPASS macro codec compatibles in the
dt-bindings for RX, TX, VA and WSA macros.
Patch 2 documents the Eliza sound card compatible.
Patch 3 adds the Eliza sound card entry to the machine driver.
ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx
The HP Laptop 15-fd0xxx uses GPIO bit 0 to control the mic mute LED,
but currently the quirk only enables the speaker mute LED (via coef
bit). Switch to the existing ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO
fixup which additionally registers a GPIO-based mic mute LED, mapping
to the same verbs (SET_GPIO_DATA/SET_GPIO_DIRECTION bit 0) that the
platform firmware uses.
ALSA: hda/realtek - Add quirk for HP Victus 15-fa0xxx (MB 8A50)
The mute LED on HP Victus 15-fa0xxx (board ID 8A50) uses ALC245 but
requires a quirk to work. This patch enables the existing
ALC245_FIXUP_HP_MUTE_LED_COEFBIT quirk for the device.
Tested on my HP Victus 15-fa0xxx. The LED behaviour works as intended.
ALSA: usb-audio: Add quirk for Redragon H510-PRO Wireless headset
The device with USB ID 040b:0897 (Weltrend Semiconductor chipset,
sold rebranded as the Redragon H510-PRO Wireless headset, reporting
"XiiSound Technology Corporation" in its USB string descriptors)
reports a constant value on GET_CUR for its PCM Playback Volume
control while still supporting an actually tunable volume. This
trips the sticky-value detection in check_sticky_volume_control(),
which disables the mixer control entirely:
usb 1-4: 5:0: sticky mixer values (0/100/1 => 80), disabling
As a result, the device boots with playback volume effectively muted
and provides no way to raise it through the normal ALSA/PipeWire
mixer path.
Apply QUIRK_FLAG_MIXER_GET_CUR_BROKEN so the sticky check marks the
control as get_cur_broken and relies on the cached value instead of
disabling the mixer control outright.
Tested by backporting this quirk flag and the supporting
get_cur_broken logic onto a Linux 7.1.2-zen kernel build that does
not yet carry it, and confirming that after applying the flag the
kernel log changes from
usb 1-4: 5:0: sticky mixer values (0/100/1 => 80), disabling
to
usb 1-4: 5:0: broken mixer GET_CUR (0/100/1 => 80)
with the control usable via the driver's cached value afterward.
Sandipan Das [Wed, 8 Jul 2026 10:32:04 +0000 (16:02 +0530)]
perf/x86/amd/core: Avoid enabling BRS from the SVM reload path
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
octeontx2-pf: check DMAC extraction support before filtering
Currently, configuring a VF MAC address via the PF (e.g., 'ip link
set <pf> vf 0 mac <mac>') blindly attempts to install a DMAC-based
hardware filter. However, the hardware parser profile might not
support DMAC extraction.
Check if the hardware parsing profile supports DMAC extraction
before adding the filter. Additionally, emit a warning message
to inform the operator if the MAC filter installation fails due
to missing DMAC extraction support. Update config->mac only
after hardware programming succeeds in otx2_set_vf_mac().
Fixes: f0c2982aaf98 ("octeontx2-pf: Add support for SR-IOV management functions") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Nitin Shetty J <nshettyj@marvell.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
projects / thirdparty / kernel / linux.git / log
