arm64: zynqmp: Fix the memory node for k26/k24 kria som boards
PMUFW requires top 1MB of the lower DDR memory reserved for its operation,
this is missing in k26/k24 sm static dts files because of which U-Boot
throws warning messages "efi_free_pool: illegal free" as EFI puts
some code to that space which shouldn't happen.
Ravi Gunasekaran [Wed, 19 Jul 2023 08:59:08 +0000 (14:29 +0530)]
usb: cdns3: gadget: Configure speed in udc_start
When one of the functions does not support super speed, the composite
driver forces the gadget to high speed. But the speed is never
configured in the cdns3 gadget driver. So configure the speed
in cdns3_gadget_udc_start just like in the kernel.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Marek Vasut <marex@denx.de>
Tim Harvey [Fri, 19 May 2023 18:58:54 +0000 (11:58 -0700)]
usb: ehci-mx6: remove unnecessary regulator enable from probe
Remove the regulator_set_enable() call from device probe which
resolves a regulator imbalance. This is unnecessary as
regulator_set_enable() will be called when ehci_register calls the
init_after_reset hook.
Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The H616 SoC has support for several types of DRAM: DDR3, LPDDR3,
DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 memory.
Let's extend the driver to support the LPDDR3 memory. All "magic"
values obtained from the boot0.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Wed, 7 Jun 2023 00:07:43 +0000 (01:07 +0100)]
sunxi: H616: dram: split struct dram_para
Currently there is one DRAM parameter struct for the Allwinner H616 DRAM
"driver". It contains many fields that are compile time constants
(set by Kconfig variables), though there are also some fields that are
probed and changed over the runtime of the DRAM initialisation.
Because of this mixture, the compiler cannot properly optimise the code
for size, as it does not consider constant propagation in its full
potential.
Help the compiler out by splitting that structure into two: one that only
contains values known at compile time, and another one where the values
will actually change. The former can then be declared "const", which will
let the compiler fold its values directly into the code using it.
We also add "const" tags for some new "struct dram_config" pointers, to
further increase code optimisation.
To help the compiler optimise the code further, the definition of the
now "const struct dram_para" has to happen at a file-global level, so
move that part out of sunxi_dram_init().
That results in quite some code savings (almost 2KB), and helps to keep
the code small with the LPDDR3 support added later.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Wed, 7 Jun 2023 00:07:42 +0000 (01:07 +0100)]
sunxi: H616: dram: const-ify DRAM function parameters
There are quite some functions in the Allwinner H616 DRAM "driver", some
of them actually change the parameters in the structure passed to them,
but many are actually not.
To increase the optimisation potential for the code, mark those functions
that just read members of the passed dram_para struct as "const".
This in itself does not decrease the code size, but lays the groundwork
for future changes doing so.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Wed, 7 Jun 2023 00:07:41 +0000 (01:07 +0100)]
sunxi: dram: make MBUS configuration functions static
The usage of the C keyword "inline" seems to be a common
misunderstanding: it's a *hint* only, and modern compilers will inline
(or not) functions based on their own judgement and provided compiler
options.
So while marking functions as "inline" does not do much, missing the
"static" keyword will force to compiler to spell out a version of the
function for potential external callers, which actually increases the
code size (though hopefully the linker will drop the function).
Change the "inline" attribute for the mbus_configure_port() functions in
some Allwinner DRAM drivers to "static", so that the explicit version
can actually be dropped from the object file, reducing the code size.
"static inline" has a use case in header files, where it avoids a warning
if a .c file including this header does not use the particular function.
In a .c file itself "static inline" is not useful otherwise, so just use
static here as well.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Sun, 11 Jun 2023 23:32:41 +0000 (00:32 +0100)]
sunxi: H616: enable USB support for H616 boards
Now that the PHY driver supports the H616 USB PHY, we can enable USB
support for the two H616 boards.
As the OrangePi Zero2 has a USB-C port hard-wired to peripheral mode,
let's enable USB gadget mode for port 0, so people can use fastboot,
ethernet or mass storage functionality.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Sun, 11 Jun 2023 23:32:39 +0000 (00:32 +0100)]
phy: sun4i-usb: Add H616 USB PHY quirk support
The H616 USB PHY is some kind of special snowflake: Only port2 works out
of the box, but all other ports need some help from this port2 to work
correctly: The CLK_BUS_PHY2 and RST_USB_PHY2 clock and reset need to be
enabled, and the SIDDQ bit in the PMU PHY control register needs to be
cleared. For this register to be accessible, CLK_BUS_ECHI2 needs to be
ungated. Don't ask ....
Follow the respective Linux patch (b45c6d80325b) and add a quirk bit,
triggering the special sequence as outlined above, for PHYs other than
PHY2: ungate this one special clock, and clear the SIDDQ bit. We also
pick the clock and reset from PHY2 and enable them as well.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Sun, 11 Jun 2023 23:32:38 +0000 (00:32 +0100)]
phy: sun4i-usb: Replace types with explicit quirk flags
So far we were assigning some crude "type" (SoC name, really) to each
Allwinner USB PHY model, then guarding certain quirks based on this.
This does not only look weird, but gets more or more cumbersome to
maintain.
Remove the bogus type names altogether, instead introduce flags for each
quirk, and explicitly check for them.
This improves readability, and simplifies future extensions.
Andre Przywara [Sun, 11 Jun 2023 23:32:37 +0000 (00:32 +0100)]
sunxi: Kconfig: rework PHY_USB_SUN4I selection
At the moment we use "select" in each Allwinner SoC's Kconfig section to
include the USB PHY driver in the build. This means it cannot be disabled
via Kconfig, although USB is not really a strictly required core
functionality, and a particular board might not even include USB ports.
Rework the Kconfig part by removing the "select" lines for each SoC's
section, and instead letting it default to "y" in the PHY driver section
itself. We use "depends on !" to exclude the few SoCs we don't support
(yet). The Allwinner V3s does not enable USB (PHY) support at the moment,
even though it should work: let the PHY default to "n" to keep the
current behaviour.
Also the MUSB USB driver directly calls some functions from the PHY
driver, so let the former depend on the PHY driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Sam Edwards <CFSworks@gmail.com>
Andre Przywara [Sun, 11 Jun 2023 23:32:36 +0000 (00:32 +0100)]
phy: sun4i-usb: add Allwinner F1C100s support
The Allwinner F1C100s implements a single USB PHY, connected to its MUSB
OTG controller. The USB PHY is of the simpler, older type (like the A10),
the only real difference is that it's indeed only one PHY.
Add a struct describing those F1C100s USB PHY properties, and connect it
to the new compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Sun, 11 Jun 2023 23:32:35 +0000 (00:32 +0100)]
phy: sun4i-usb: Fix of_xlate() argument check
In its of_xlate() function, the Allwinner USB PHY driver compares the
args_count variable against the number of implemented USB PHYs, although
this is the *number of arguments* to the DT phandle property. Per the DT
binding for this PHY device, this number is always one, so this check
will always fail if the particular SoC implements exactly one USB PHY.
So far this affected only the V3s (which has USB support disabled), but
the F1C100s also sports one PHY only.
Fix that check to compare args_count against exactly 1, and the args[0]
content (requested PHY number) against the number of implemented PHYs.
This fixes USB operation on the Allwinner V3s and allows to enable USB
on the Allwinner F1C100s SoC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Simon Glass [Tue, 18 Jul 2023 13:24:08 +0000 (07:24 -0600)]
binman: Support writing symbols inside a mkimage image
Add support for writing symbols and determining the assumed position of
binaries inside a mkimage image. This is useful as an example for other
entry types which might want to do the same thing.
Simon Glass [Tue, 18 Jul 2023 13:24:04 +0000 (07:24 -0600)]
binman: Support simple templates
Collections can used to collect the contents of other entries into a
single entry, but they result in a single entry, with the original entries
'left behind' in their old place.
It is useful to be able to specific a set of entries ones and have it used
in multiple images, or parts of an image.
Simon Glass [Tue, 18 Jul 2023 13:23:59 +0000 (07:23 -0600)]
binman: Provide a way to specify the fdt-list directly
Sometimes multiple boards are built with binman and it is useful to
specify a different FDT list for each. At present this is not possible
without providing multiple values of the of-list entryarg (which is not
supported in the U-Boot build system).
Allow a fit,fdt-list-val string-list property to be used instead.
Marek Vasut [Tue, 18 Jul 2023 13:23:58 +0000 (07:23 -0600)]
binman: Convert mkimage to Entry_section
This is needed to handle mkimage with inner section located itself in a
section.
Signed-off-by: Marek Vasut <marex@denx.de>
Use BuildSectionData() instead of ObtainContents(), add tests and a few
other minor fixes: Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 18 Jul 2023 13:23:55 +0000 (07:23 -0600)]
stm32mp15: Avoid writing symbols in SPL
These boards use SPL in a mkimage entry and apparently access the symbol
containing the image position of U-Boot, but put U-Boot in another
image. This means that binman is unable to fill in the symbol correctly
in the SPL binary.
This doesn't matter at present since mkimage doesn't support symbol
writing. But with the upcoming conversion to a section, it will. So add
a property to disable symbol writing.
tools: Fix package discovery in pyproject.toml of u_boot_pylib.
When building from source, setuptools would complain about not finding
package via its auto-discovery mechanism. Manually specify how to
locate the files, relative to the package's directory.
* tools/u_boot_pylib/pyproject.toml: New tool.setuptools.packages.find
section.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
The loads and saves commands crash on the sandbox due to illegal memory
access.
For command line arguments the sandbox uses a virtual address space which
does not equal the addresses of the memory allocated with memmap(). Add the
missing address translations for the loads and saves commands.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Sergei Antonov [Mon, 12 Jun 2023 21:19:04 +0000 (00:19 +0300)]
sandbox: fix a compilation error
With sandbox and sandbox64 configurations:
In file included from .../u-boot/include/test/test.h:156,
from .../u-boot/include/test/lib.h:9,
from .../u-boot/test/lib/test_crc8.c:8:
.../u-boot/arch/sandbox/include/asm/test.h: In function ‘sandbox_sdl_set_bpp’:
.../u-boot/arch/sandbox/include/asm/test.h:323:17: error: ‘ENOSYS’ undeclared (first use in this function)
323 | return -ENOSYS;
| ^~~~~~
Per Tom Rini's suggestion:
move that function prototype over to arch/sandbox/include/asm/sdl.h
and make test/dm/video.c include <asm/sdl.h>
Cc: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
John Keeping [Thu, 1 Jun 2023 14:11:19 +0000 (15:11 +0100)]
core: read: fix dev_read_addr_size()
The behaviour of dev_read_addr_size() is surprising as it does not
handle #address-cells and #size-cells but instead hardcodes the values
based on sizeof(fdt_addr_t).
This is different from dev_read_addr_size_index() and
dev_read_addr_size_name() both of which do read the cell sizes from the
device tree.
Since dev_read_addr_size() is only used by a single driver and this
driver is broken when CONFIG_FDT_64BIT does not match the address size
in the device tree, fix the function to behave like all of the other
similarly named functions. Drop the property name argument as the only
caller passes "reg" and this is the expected property name matching the
other similarly named functions.
Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> # chromebook_jerry Tested-by: Simon Glass <sjg@chromium.org> # chromebook_bob
Eugen Hristev [Thu, 4 May 2023 12:22:21 +0000 (15:22 +0300)]
dm: core: of_access: fix return value in of_property_match_string
of_property_match_string calls of_find_property to search for the
string property.
If the device node does not exist, of_find_property returns NULL, and
of_property_match_string returns -EINVAL, which is correct.
However, if the device node exists, but the property is not found,
of_find_property still returns NULL, but it will place -FDT_ERR_NOTFOUND
in the *lenp variable.
of_property_match_string does not use the lenp parameter, thus this error
case is being lost, and treated as if the node is NULL, and returns
-EINVAL, which is incorrect.
The callers of of_property_match_string treat the error differently if
the return value is -EINVAL or -ENOENT, e.g. in dwc3 driver:
ret = generic_phy_get_by_name(dev, "usb3-phy", &phy);
if (!ret) {
ret = generic_phy_init(&phy);
if (ret)
return ret;
} else if (ret != -ENOENT && ret != -ENODATA) {
debug("could not get phy (err %d)\n", ret);
return ret;
} else {
phy.dev = NULL;
}
So the caller drivers will just consider the property missing if -ENOENT
is returned, versus the case of -EINVAL, which means something else.
To fix this situation, changed the code to call the of_find_property
with the right third argument to catch this error code and treat it
accordingly.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tom Rini [Wed, 12 Jul 2023 02:33:03 +0000 (22:33 -0400)]
CI: Add automatic retry for test.py jobs
It is not uncommon for some of the QEMU-based jobs to fail not because
of a code issue but rather because of a timing issue or similar problem
that is out of our control. Make use of the keywords that Azure and
GitLab provide so that we will automatically re-run these when they fail
2 times. If they fail that often it is likely we have found a real issue
to investigate.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 12 Jul 2023 20:22:22 +0000 (16:22 -0400)]
Azure: Add excludes to the imx8_imx9 job
The job to build all imx8 and imx9 platforms is currently close to, or
sometimes exceeding the allowed build time. Exclude some platforms that
are already being built under their vendor-specific job as well to
reduce the time.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 19 Jul 2023 19:09:12 +0000 (15:09 -0400)]
Azure: Rework our Rockchip jobs slightly
Currently the 64bit "rk" job is close to and sometimes goes over the job
time limit. Let us rework this in to one job for "rk" and "rv" (which
are the SoC prefixes) jobs which include or exclude "rockchip" the board
vendor. This gives us two jobs of similar numbers of platforms to build
now instead.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
buildman: Switch ARC toolchain to the upstream version
Back in the day we relied a lot on Synopsys own build of the GNU tools
for ARC processors, but since then we worked hard on getting all our changes
upstream and for a couple of years now we have ARCompact (AKA ARCv1)
and ARCv2 processors supported very well in upstream GCC, Binutils, GDB etc.
And so there's no need to use Synopsys forks any longer, thus we remove
all the references to that form and use upstream components as majority
of other architectures in U-Boot.
Thanks to Tom for pointing to that left-over!
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
When building qemu, all required submodules (of which we need more than
just dtc) are handled automatically. Currently trying to init the
submodule the way we do results in a git failure.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 14 Jul 2023 00:37:32 +0000 (20:37 -0400)]
mips: octeon: Correct types in cvmx-pko3-queue
When building with gcc-13.1 we see that the prototype for
cvmx_pko3_sq_config_children does not match the declaration. Make these
match and correct a typo in the function's version of the docs that the
prototype did not have, as part of keeping those in-sync.
Tom Rini [Thu, 20 Jul 2023 14:19:04 +0000 (10:19 -0400)]
Merge tag 'efi-2023-10-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-10-rc1-2
UEFI:
* test: avoid function name 'setup' in capsule tests to not treat it as
a fixture
* ensure that device paths for USB block devices are unique
* enable having multiple EFI_LOADER block devices
* use InstallMultipleProtocolInterfaces() in TCG protocol implementation to
increase UEFI compliance
are seen. This is due to creating non-unique device paths. To uniquely
identify devices we must provide path nodes for all devices on the path
from the root device.
Add support for generating device path nodes for all uclasses.
Reported-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
efi_loader: fix dp_fill() for BLKMAP, HOST, VIRTIO
Do not assume that the preceding device path contains a single VenHW node.
Instead use the return value of dp_fill() which provides the address of the
next node.
Fixes: 23ad52fff4da ("efi_loader: device_path: support Sandbox's "host" devices") Fixes: 19ecced71cfb ("efi_loader: device path for virtio block devices") Fixes: 272ec6b45304 ("efi_loader: device_path: support blkmap devices") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Masahisa Kojima [Mon, 3 Jul 2023 06:08:45 +0000 (15:08 +0900)]
efi_driver: fix duplicate efiblk#0 issue
The devnum value of the blk_desc structure starts from 0,
current efi_bl_create_block_device() function creates
two "efiblk#0" devices for the cases that blk_find_max_devnum()
returns -ENODEV and blk_find_max_devnum() returns 0(one device
found in this case).
This commit uses blk_next_free_devnum() instead of blk_find_max_devnum().
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Ilias Apalodimas [Mon, 19 Jun 2023 11:14:03 +0000 (14:14 +0300)]
efi_loader: make efi_remove_protocol() static
A previous patch is removing the last consumer of efi_remove_protocol().
Switch that to static and treat it as an internal API in order to force
users install and remove protocols with the appropriate EFI functions.
It's worth noting that we still have files using efi_add_protocol(). We
should convert all these to efi_install_multiple_protocol_interfaces()
and treat efi_add_protocol() in a similar manner
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas [Mon, 19 Jun 2023 11:14:02 +0000 (14:14 +0300)]
efi_loader: use efi_install_multiple_protocol_interfaces()
The TCG2 protocol currently adds and removes protocols with
efi_(add/remove)_protocol().
Removing protocols with efi_remove_protocol() might prove
problematic since it doesn't call DisconnectController() when
uninstalling the protocol and does not comply with the UEFI specification.
It's also beneficial for readability to have protocol installations and
removals in pairs -- IOW when efi_install_multiple_protocol_interfaces()
is called, efi_uninstall_multiple_protocol_interfaces() should be used to
remove it. So let's swap the efi_add_protocol() as well.
Tom Rini [Tue, 18 Jul 2023 13:55:32 +0000 (09:55 -0400)]
Merge branch '2023-07-17-assorted-updates'
- Merge in some Kconfig dependencies fixes, typo fixes, erofs update,
shell portability fix, an env save fix, better mbr+gpt support, and
some android A/B enhancements.
Set MMC clock when reverting to safe bus mode and speed
in case current MMC mode fails. Otherwise, trying out
the other modes may fail as well.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[hp: fallback to legacy_speed] Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Hai Pham [Mon, 19 Jun 2023 22:38:25 +0000 (00:38 +0200)]
mmc: renesas-sdhi: Send stop when MMC tuning command fails
When tuning command (CMD21) fails with command error, call
mmc_send_stop_transmission() to send stop command (CMD12).
Reviewed-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Add dev_dbg() message in case tuning abort fails
Move tuning opcode check from mmc_abort_tuning()] Reviewed-by: Peng Fan <peng.fan@nxp.com>
Hai Pham [Mon, 19 Jun 2023 22:38:24 +0000 (00:38 +0200)]
mmc: Introduce mmc_send_stop_transmission()
If a tuning command times out, the card could still be processing it,
which will cause problems for recovery. The eMMC specification section
6.6 Data transfer mode (cont’d) claims that CMD12 can be used to stop
CMD21:
"
The relationship between the various data transfer modes is summarized (see Figure 27):
- All data read commands can be aborted any time by the stop command (CMD12).
The data transfer will terminate and the Device will return to the Transfer State.
The read commands are: ... send tuning block (CMD21) ....
"
Add a function that does that.
Based on Linux commit [1] and [2].
[1] e711f0309109 ("mmc: mmc: Introduce mmc_abort_tuning()")
[2] 21adc2e45f4e ("mmc: Improve function name when aborting a tuning
cmd")
Reviewed-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Update commit message, quote relevant part of the specification.
Rename to mmc_send_stop_transmission().
Remove tuning opcode check, this is controller driver specific.
Deduplicate part of mmc_read_blocks() using this function.] Reviewed-by: Peng Fan <peng.fan@nxp.com>
Marek Vasut [Mon, 19 Jun 2023 22:38:23 +0000 (00:38 +0200)]
mmc: Fix MMC_CMD_STOP_TRANSMISSION response type and add comment
For MMC/eMMC, the MMC_CMD_STOP_TRANSMISSION response is R1 for read
transfers and R1b for write transfers per JEDEC Standard No. 84-B51
Page 126 . The response is R1b unconditionally per Physical Layer
Simplified Specification Version 9.00.
Correct the response type and add a comment about it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
When CONFIG_SYS_REDUNDAND_ENVIRONMENT is enabled, by default env is
getting saved to redundant environment irrespective of primary env is
present or not.
It means even if primary and redundant environment are not present, by
default, env is getting stored to redundant environment. Even if primary
env is present, it is choosing to store in redudndant env.
Ideally it should look for primary env and choose to store in primary env
if it is present. If both primary and redundant env are not present then
it should save in to primary env area.
Fix the issue by making env_valid = ENV_INVALID when both the
environments are not present.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Some devices keep 2 copies of the bootloader_message in the misc
partition and write each in sequence when updating. This ensures that
there is always one valid copy of the bootloader_message. Teach u-boot
to optionally try a backup bootloader_message from a specified offset if
the primary one fails its CRC check.
Forces the DOS partition type driver to be used when verifying the MBR.
This is particularly useful when using a hybrid MBR & GPT layout as
otherwise MBR verification would mostly likely fail since the GPT
partitions will be returned, even if the MBR is actually valid.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Adds a test suite to ensure that part_get_info_by_type works correctly
by creating a hybrid GPT/MBR partition table and reading both.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
[trini: Add this on the other sandbox configs] Signedd-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
disk: part: Add API to get partitions with specific driver
Adds part_driver_get_type() API which can be used to force a specific
driver to be used when getting partition information instead of relying
on auto detection.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
d94d9844bc ("dm: part: Update test to use mmc2") attempted to make the
test use mmc2, but the change was incomplete in that it didn't also
change the strings that reference a specific partition. Fix these so
that the test passes again
tests: Fix exception when cleaning up skipped test
If test_cat and test_xxd cannot create the required file, the test will
be skipped, but this would result in an exception being raised in the
finally block because the file didn't exist to be cleaned up. This
caused the test to be marked as failed instead of skipped.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Joshua Watt [Fri, 23 Jun 2023 22:05:48 +0000 (17:05 -0500)]
android_ab: Add option to skip decrementing tries
It is is sometimes desired to be able to skip decrementing the number of
tries remaining in an Android A/B boot, and instead just check which
slot will be tried later. This can commonly be be the case for platforms
that want to A/B u-boot itself, but are required to boot from a FAT MBR
partition. In these cases, u-boot must do an early check that the MBR
points to the correct A/B boot partition, and if not rewrite the MBR to
point to the correct one and reboot. Decrementing the try count in this
case is not desired because it means that each u-boot might constantly
ping-pong overwriting the MBR and rebooting until all the retries are
used up.
Jonas Karlman [Tue, 11 Jul 2023 22:37:30 +0000 (22:37 +0000)]
disk: Use BOOT_DEFAULTS instead of DISTRO_DEFAULTS
Set default y based on common BOOT_DEFAULTS instead of DISTRO_DEFAULTS.
No change is intended, affected options is already implied for DISTRO
and BOOTSTD due to BOOT_DEFAULTS imply DOS_PARTITION (USB_STORAGE),
EFI_PARTITION and ISO_PARTITION.
Fixes: a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for distro and bootstd") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Tue, 11 Jul 2023 12:15:53 +0000 (14:15 +0200)]
Makefile: Add missing quotes around sort --field-separator
Busybox sort does not handle --field-separator== , replace this
with --field-separator='=' for maximum compatibility.
Fixes: cc5a490cf465 ("Makefile: Sort u-boot-initial-env output") Reported-by: Milan P. Stanić <mps@arvanta.net> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 16 Jul 2023 03:39:17 +0000 (21:39 -0600)]
efi: Use the installed ACPI tables
U-Boot sets up the ACPI tables during startup. Rather than creating a
new set, install the existing ones. Create a memory-map record to cover
the tables.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:13 +0000 (21:39 -0600)]
x86: Make sure that the LPC is active before SDRAM init
Some boards need to access GPIOs to determine which SDRAM is fitted to the
board, for example chromebook_link. Probe this device (if it exists) to
make sure that this works as expected.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 16 Jul 2023 03:39:08 +0000 (21:39 -0600)]
x86: Enable useful options for qemu-86_64
This build can be used to boot standard distro builds, since these are
mostly 64-bit these days. Enable some more options, so that all possible
EFI UUIDs are decoded, we get a proper printf() in SPL, can search
memory for tables, support the full set of standard-boot features, have
full logging and can boot from CDROM media.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
projects / thirdparty / u-boot.git / log
