Peng Fan [Tue, 26 Jul 2022 08:40:37 +0000 (16:40 +0800)]
imx: move get_boot_device to common file
i.MX8MN/P/ULP supports ROM API, they have almost same get_boot_device
implementation, so move to a common file. And when support i.MX9,
no need to include the other function copy.
Since sys_proto.h is included in imx_romapi.c, there will be build
warning for i.MX8M because wdog_regs not defined, so include imx-regs.h
in i.MX8M sys_proro.h
Ye Li [Tue, 26 Jul 2022 08:40:34 +0000 (16:40 +0800)]
imx: spl: Allow iMX7/8/8M to overwrite spl_board_boot_device
Move the default mapping of spl_boot_device to weak function of
spl_board_boot_device. So that every board of iMX7/8/8M can overwrite
this function to implement specific mapping.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
MAINTAINERS: Update file list for ARM Freescale IMX
The MAINTAINERS file currently lists files in
arch/arm/include/asm/arch-imx/ being part of the IMX maintainers
purview, however the arch/arm/include/asm/ directory also contains the
directories arch-imx8, arch-imx8m, arch-imx8ulp and arch-imxrt which
would also appear to be relevant to the team. Tweak the entry to cover
these directories so that tools like get_maintainers.pl will suggest
relevant maintainers when making changes just in these directories.
Marek Vasut [Tue, 12 Jul 2022 17:41:29 +0000 (19:41 +0200)]
binman: Increase default fitImage data section resize step from 1k to 64k
Currently the fitImage data area is resized in 1 kiB steps. This works
when bundling smaller images below some 1 MiB, but when bundling large
images into the fitImage, this make binman spend extreme amount of time
and CPU just spinning in pylibfdt FdtSw.check_space() until the size
grows enough for the large image to fit into the data area. Increase
the default step to 64 kiB, which is a reasonable compromise -- the
U-Boot blobs are somewhere in the 64kiB...1MiB range, DT blob are just
short of 64 kiB, and so are the other blobs. This reduces binman runtime
with 32 MiB blob from 2.3 minutes to 5 seconds.
The following can be used to trigger the problem if rand.bin is some 32 MiB.
"
/ {
itb {
fit {
images {
test {
compression = "none";
description = "none";
type = "flat_dt";
Patrick Delaunay [Tue, 12 Jul 2022 07:39:49 +0000 (09:39 +0200)]
log: force DEBUG when LOG_DEBUG is activated
When CONFIG_LOG is activated, if LOG_DEBUG is defined in a file and
DEBUG is not defined the trace with debug() macro are not displayed,
because the parameter cond : _DEBUG = 0 is checked in debug_cond().
With this patch the define DEBUG, used to force the trace generated by
debug() macro, is linked with the define LOG_DEBUG, used to force the
trace generated by other macros (log_debug, dev_dbg, pr_debug).
We only need to define LOG_DEBUG in a file to activate all the
traces generated by any U-Boot debug macro, as it is described in
/doc/develop/logging.rst
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
If parameter drv of lists_bind_fdt() is specified, we want to bind to this
specific driver even if its field of_match is NULL.
If entry->of_match is NULL, we should not dereference it in a debug
statement.
Fixes: d3e773613b6d ("dm: core: Use U-Boot logging instead of pr_debug()") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
When programming qspi flash speed we need to check the requested flash
speed not to exceed the spi max frequency. In the current implementation
we are checking qspi ref clk instead. This commit fixes the issue by
checking the requested speed and programs the specified max frequency.
spi: zynq_qspi: Add support for zynq_qspi_mem_exec_op
Add support_ops function zynq_qspi_mem_exec_op to check controller
supported operations by spi-mem framework. Current default support ops
function does not allow dummy buswidth no more than 1, unless we are
using buswidth is 4 for TX.
spi: zynq_qspi: Use dummy buswidth in dummy byte calculation
Fix dummy bytes calculation incase of valid dummy bytes when dummy
buswidth is > 1. Current dummy bytes calculation does not provide
correct dummy values for dummy buswidth > 1.
spi: xilinx_spi: Add support ops to axi qspi driver
Add support_ops function to check controller supported operations by
spi-mem framework. Current default support ops function does not allow
dummy buswidth no more than 1, unless we are using buswidth is 4 for TX.
In order to support dummy buswidth > 1 by spi-nor framework we are adding
explicit support_ops to check controller supported operations.
Fix dummy bytes calculation incase of valid dummy bytes when dummy
buswidth is > 1. Current dummy bytes calculation does not provide
correct dummy values for dummy buswidth > 1.
spi: xilinx_spi: Add support for spi memory operations
Add support for spi memory operations for xilinx AXI qspi driver.
This provides an high-level interface to execute SPI memory
operations by the controller.
Remove existing spi transfer based implementation and use
spi memory based exec_op() implementation for qspi IO operations.
Add supporting new compatible string "u-boot,zynqmp-fpga-enc" to
handle loading encrypted bitfiles.
This feature requires encrypted FSBL, as according to UG1085:
"The CSU automatically locks out the AES key, stored in either BBRAM
or eFUSEs, as a key source to the AES engine if the FSBL is not
encrypted. This prevents using the BBRAM or eFUSE as the key source
to the AES engine during run-time applications."
Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Link: https://lore.kernel.org/r/20220722141614.297383-14-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek <michal.simek@amd.com>
Reduce the function code by calling xilinx_pm_request() once only.
Use the same variable bsize_req to store either bstream size in bytes
or an address of bstream size according to a type required by the
firmware version. Remove obsolete debug().
Store a set of supported bitstream types in xilinx_desc structure.
It will be used to determine whether an FPGA image is able to be
loaded with a given driver.
For imx8mm-cl-iot-gate we can use extension command to scan
extension boards attached on the mainboard. We enable the
extension command by default for users to detect the extension
boards.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
arm64: versal: Enable power domain driver and its dependencies
Enable power domain driver to configure pmufw config object and request
node for all the IP's that are enabled in DT.
This driver depends on mailbox and IPI driver, hence enable them as well.
Add ARCH_VERSAL in the depends on of mailbox Kconfig to compile for
Versal platforms.
mailbox: zynqmp: Move struct zynqmp_ipi_msg from sys_proto.h
Mailbox driver might be need for Versal and other future platforms.
To remove the dependency, move struct zynqmp_ipi_msg to
zynqmp_firmware.h so that mailbox driver compiles for other platforms
easily.
firmware: zynqmp: Load config overlay for core0 to pmufw
Try loading pmufw config overlay for core0, if it doesn't return any
error it means pmufw is accepting nodes for other IP's. Otherwise dont
try to load config object for any other IP, just return from
zynqmp_pmufw_node function.
reset: zynqmp: Add reset driver support for versal
Add support for versal platform by adding "xlnx,versal-reset"
compatible string in zynqmp-reset driver. Reset numbering schema
for versal is not same as zynqmp, so nr_reset and reset_id are
set to zero. In case of assert/dessert, required device reset id
is sent from respective driver through struct reset_ctl.
Michal Simek [Thu, 21 Jul 2022 14:19:17 +0000 (16:19 +0200)]
xilinx: Wire uuid reading from FRU
UUID is already recorded when FRU is parsed but it is not copied to local
structures and exported to variable that's why simply add it.
Data is saved in binary format but there must be conversion to string for
exporting it to variable and string should be in uuid format too.
One way how to use it directly is to setup pxeuuid based on it. For
example via preboot with "setenv pxeuuid ${board_uuid}"
serial: zynq: Use DIV_ROUND_CLOSEST() to calcurate divider value
Since the calulation of "bgen" is rounded down, using a higher
baudrate will result in a larger difference from the actual
baudrate. Should use DIV_ROUND_CLOSEST() like the Linux driver.
Michal Simek [Thu, 7 Jul 2022 08:45:38 +0000 (10:45 +0200)]
arm64: zynqmp: Disable LMB for mini configurations
There is no need to have LMB enabled that's why save some space by
disabling it.
aarch64: (for 8/8 boards) all -1168.5 rodata -105.5 text -1063.0
xilinx_zynqmp_mini: all -2013 rodata -185 text -1828
xilinx_zynqmp_mini_qspi: all -2013 rodata -185 text -1828
xilinx_zynqmp_mini_emmc0: all -2661 rodata -237 text -2424
xilinx_zynqmp_mini_emmc1: all -2661 rodata -237 text -2424
zynqmp: Run board_get_usable_ram_top() only on main U-Boot
With commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory
location"), the function board_get_usable_ram_top() is allocating
MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this
much memory in case of mini U-Boot.
Keep these functions which use lmb under CONFIG_LMB so that they are
compiled and used only when LMB is enabled.
Samuel Holland [Fri, 15 Jul 2022 06:40:25 +0000 (01:40 -0500)]
tools: relocate-rela: Fix ELF decoding on big-endian hosts
The new ELF decoding logic assumed that the target binary has the same
endianness as the host, which broke building ARM64 firmware binaries on
big-endian machines.
This commit fixes the ELF64 decoding to be host-endianness-neutral, and
applies the same changes to the ELF32 decoding. It does not fix the
microblaze-specific dynamic symbol decoding.
It also corrects the functions used for byte swapping in rela_elf64()
and rela_elf32(). The result is the same, but semantically the code is
converting bytes read from a foreign-endianness file to host byte order.
Fixes: 4c9e2d643460 ("tools: relocate-rela: Read rela start/end directly from ELF") Fixes: a1405d9cfedb ("tools: relocate-rela: Check that relocation works only for EM_AARCH64") Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220715064026.54551-1-samuel@sholland.org Signed-off-by: Michal Simek <michal.simek@amd.com>
xilinx: Remove the legacy property "#stream-id-cells"
"#stream-id-cells" was being used with "mmu-masters" for Xen specific
device trees.
With Xen commit 2278d2cbb0b7c1b48b298c6c4c6a7de2271ac928 (Link below)
Xen is able to support smmu bindings in both formats ie :
1. Using iommus (linux format)
2. Using mmu-masters (legacy format).
Thus, "#stream-id-cells" which was used for the legacy format, can be
removed as Xen can use smmu bindings in linux format.
drivers: xen: unmap Enlighten page before jumping to Linux
This commit fixes issue with usage of Xen hypervisor shared info page.
Previously U-boot did not unmap it at the end of OS boot process. Xen
did not prevent guest from this. So, it worked, but caused wierd
issues - one memory page, that was returned by memalign in U-boot
for Enlighten mapping was not unmaped by Xen (shared_info values was
not removed from there) and returned to allocator. During the Linux
boot, it uses shared_info page as regular RAM page, which leads to
hypervisor shared info corruption.
So, to fix this issue, as discussed on the xen-devel mailing list, the
code should:
1) Unmap the page
2) Populate the area with memory using XENMEM_populate_physmap
This patch adds page unmapping via XENMEM_remove_from_physmap, fills
hole in address space where page was mapped via XENMEM_populate_physmap
and return this address to memory allocator for freeing.
Tom Rini [Mon, 18 Jul 2022 15:33:39 +0000 (11:33 -0400)]
arm: Remove unused references to CONFIG_SOC_DM*
There are no references to CONFIG_SOC_DM355 / CONFIG_SOC_DM365 /
CONFIG_SOC_DM644X / CONFIG_SOC_DM646X and the files these Makefile lines
reference have already been dropped.
Andrew Davis [Fri, 15 Jul 2022 17:31:48 +0000 (12:31 -0500)]
spl: Use SPL_TEXT_BASE instead of ISW_ENTRY_ADDR
The ISW_ENTRY_ADDR symbol was used for OMAP devices in place of
SPL_TEXT_BASE. Keystone2 HS devices were not using it right either.
Remove ISW_ENTRY_ADDR and use SPL_TEXT_BASE directly.
Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Andrew Davis [Fri, 15 Jul 2022 16:38:54 +0000 (11:38 -0500)]
arm: k3: config.mk: Read software revision information from file on HS
Read the swrv.txt file from the TI Security Development Tools when
TI_SECURE_DEVICE is enabled. This allows us to set our software
revision in one place and have it used by all the tools that create
TI x509 boot certificates.
k3_gen_x509_cert: Make SWRV configurable for anti-rollback protection
The x509 certificate SWRV is currently hard-coded to 0. This need to be
updated to 1 for j721e 1.1, j7200 and am64x. It is don't care for other
k3 devices.
Added new config K3_X509_SWRV to k3. Default is set to 1.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com> Reviewed-by: Dave Gerlach <d-gerlach@ti.com>
Andrew Davis [Fri, 15 Jul 2022 16:21:27 +0000 (11:21 -0500)]
arm: mach-k3: Remove ROM firewalls on GP devices
This isn't strictly needed as these firewalls should all be disabled on
GP, but it also doesn't hurt, so do this unconditionally to remove this
use of CONFIG_TI_SECURE_DEVICE.
Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Andrew Davis [Fri, 15 Jul 2022 15:25:27 +0000 (10:25 -0500)]
arm: mach-k3: Rename SOC_K3_AM6 to SOC_K3_AM654
The first AM6x device was the AM654x, but being the first we named it
just AM6, since more devices have come out with this same prefix we
should switch it to the normal convention of using the full name of the
first compatibility device the series. This makes what device we are
talking about more clear and matches all the K3 devices added since.
Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Andrew Davis [Fri, 15 Jul 2022 15:25:26 +0000 (10:25 -0500)]
arm: mach-k3: Only build init files for SPL
The content of these files are only used in SPL builds. The contents are
already ifdef for the same, remove that and only include the whole file
in the build when building for SPL.
Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Stephan Gerhold [Wed, 13 Jul 2022 19:17:11 +0000 (21:17 +0200)]
arm: dts: db410c/db820c: Fix SPMI addresses
The Qualcomm device trees in U-Boot are currently not consistent with
the upstream DTs used in the Linux kernel. While some bindings are
similar to the official specification in the Linux kernel, several
nodes have subtle differences, e.g. the "compatible"s or the exact
specification of memory registers.
This means that some of the Qualcomm-related U-Boot drivers are not
compatible with the Linux DT (and vice versa).
The SPMI node is one such example: the "core" region starts at
0x0200f000 in the upstream Linux MSM8916 DT, but in U-Boot it starts at
0x0200f800. The end result is normally the same, since the Linux SPMI
driver simply adds the 0x800 internally.
However, commit f5a2d6b4b03a ("spmi: msm: add arbiter version 5
support") imported this behavior into the U-Boot driver, without
adjusting the DB410c/DB820c device trees. This means that the 0x800
offset is now added twice, breaking all SPMI read/write operations:
Failed to find PMIC pon node. Check device tree
Failed to find pm8916_gpios@c000 node.
USB init failed: -6
starting USB...
Bus ehci@78d9000: Failed to find pm8916_gpios@c000 node.
probe failed, error -6
No working controllers found
While the mistake is strictly speaking in the spmi-msm driver, fix the
issue by making the SPMI nodes in the DB410c/DB820c consistent with the
upstream Linux DT instead.
Ideally we should even go a step further by fixing the remaining uses
of custom bindings in the U-Boot drivers and moving to using the Linux
DTs as-is. This would likely avoid such mistakes in the future and
would also make the porting process much easier.
Matt Ranostay [Wed, 13 Jul 2022 11:49:36 +0000 (04:49 -0700)]
armv8: mach-k3: correct define checking for AM625/AM642 memory maps
Using CONFIG_IS_ENABLED breaks accessing memory map structure when
doing a A53 SPL build for AM625 and AM642 platforms. This is due to
'abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y''
in which there is no CONFIG_SPL_SOC_K3_AM625/CONFIG_SPL_SOC_K3_AM642
defined in the configuration.
For the A53 SPL builds on these platform to access the memory mapping
which it will need for enabling the mmu/cache it must use #if defined(X)
checks and not CONFIG_IS_ENABLED.
Cc: Suman Anna <s-anna@ti.com> Cc: Neha Francis <n-francis@ti.com> Signed-off-by: Matt Ranostay <mranostay@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Currently u-boot running on mt7622 will print an warning log at beginning:
> serial_mtk serial@11002000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
It turns out that the pinctrl uclass can't work properly in board_f stage.
Since the uart0 is the default UART device used by bootrom, and will be
initialized in both bootrom and tf-a bl2. It's ok not to setup pinctrl for
uart0 in u-boot.
This patch removes the default pinctrl of uart0 to suppress the unwanted
warning.
Currently this clock driver initializes clocks for UART and eMMC. Along
with this import "qcom,gcc-qcs404.h" header from Linux mainline to
support DT bindings.
For SDCC version 5.0.0, MCI registers are removed from SDCC interface
and some registers are moved to HC. So add support to use the new
compatible string "qcom,sdhci-msm-v5". Based on this new msm variant,
pick the relevant variant data and use it to detect MCI presence thereby
configuring register read/write to msm specific registers.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
U-boot is chain loaded by ABL in 64-bit mode as part of boot.img.
For detailed build and boot instructions, refer to
doc/board/qualcomm/sdm845.rst, board: dragonboard845c.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Rather than using magic numbers as clock ids for peripherals import
qcom,gcc-sdm845.h from Linux to be used standard macros for clock ids.
So start using corresponding clk-id macro for debug UART.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
According to u-boot DT recomendation, u-boot specific DT properties belong
to *-uboot.dtsi. Also for starqltechn board (which is the only current
consumer of sdm845.dtsi), the properties are already included in
starqltechn-uboot.dtsi, so remove corresponding redundant properties.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
board: starqltechn: Align DT node overrides with sdm845.dtsi
Currently there is a mismatch among DT node overrides in starqltechn
board DTS file and the actual DT nodes in the sdm845.dtsi. So fix that
to align with DT nodes in sdm845.dtsi.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
projects / thirdparty / u-boot.git / log
