From 1f7ad370bd1fecb8c5b42acd743f49858743914b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 20 Oct 2016 09:52:41 +0200 Subject: [PATCH] ARM64: zynqmp: Add support for zcu106 Preliminary support for zcu106 which is almost the same as zcu102. SPL is disabled because of missing hw design. Signed-off-by: Michal Simek --- arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-zcu106.dts | 651 +++++++++++++++++++++++++ configs/xilinx_zynqmp_zcu106_defconfig | 68 +++ include/configs/xilinx_zynqmp_zcu106.h | 56 +++ 4 files changed, 776 insertions(+) create mode 100644 arch/arm/dts/zynqmp-zcu106.dts create mode 100644 configs/xilinx_zynqmp_zcu106_defconfig create mode 100644 include/configs/xilinx_zynqmp_zcu106.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 71cf54023d6..f27bdb484d5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -103,6 +103,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zcu100.dtb \ zynqmp-zcu102.dtb \ zynqmp-zcu102-revB.dtb \ + zynqmp-zcu106.dtb \ zynqmp-zc1751-xm015-dc1.dtb \ zynqmp-zc1751-xm016-dc2.dtb \ zynqmp-zc1751-xm017-dc3.dtb \ diff --git a/arch/arm/dts/zynqmp-zcu106.dts b/arch/arm/dts/zynqmp-zcu106.dts new file mode 100644 index 00000000000..0bed4c800c1 --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu106.dts @@ -0,0 +1,651 @@ +/* + * dts file for Xilinx ZynqMP ZCU106 + * + * (C) Copyright 2016, Xilinx, Inc. + * + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include +#include + +/ { + model = "ZynqMP ZCU106 RevA"; + compatible = "xlnx,zynqmp-zcu106", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <108>; /* down */ + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ + xlnx,overfetch; /* for testing purpose */ + xlnx,ratectrl = <0>; /* for testing purpose */ + xlnx,src-issue = <31>; +}; + +&fpd_dma_chan2 { + status = "okay"; + xlnx,ratectrl = <100>; /* for testing purpose */ + xlnx,src-issue = <4>; /* for testing purpose */ +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; + xlnx,include-sg; /* for testing purpose */ +}; + +&gem3 { + status = "okay"; + local-mac-address = [00 0a 35 00 02 90]; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@21 { + reg = <21>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + /* + * Enable all GTs to out from U-Boot + * i2c mw 20 6 0 - setup IO to output + * i2c mw 20 2 ef - setup output values on pins 0-7 + * i2c mw 20 3 ff - setup output values on pins 10-17 + */ + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - SFP_SI5328_INT_ALM + * 1 - HDMI_SI5328_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMC_HPC0_PRSNT_M2C_B + * 11 - FMC_HPC1_PRSNT_M2C_B + * 2-4, 7, 12-17 - not connected + */ + }; + + tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */ + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2cswitch@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { /* i2c mw 75 0 1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { /* i2c mw 75 0 1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* i2c mw 75 0 1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "max15303"; + reg = <0x1a>; + }; + max15303@1b { /* u8 */ + compatible = "max15303"; + reg = <0x1b>; + }; + max15303@1d { /* u18 */ + compatible = "max15303"; + reg = <0x1d>; + }; + + max20751@72 { /* u95 */ + compatible = "max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; + + /* FIXME PMOD - j160 */ + /* FIXME MSP430F - u41 - not detected */ +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + /* FIXME PL i2c via PCA9306 - u45 */ + /* FIXME MSP430 - u41 - not detected */ + i2cswitch@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { /* i2c mw 74 0 1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom@54 { /* u23 */ + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { /* i2c mw 74 0 2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator1@36 { /* SI5341 - u69 */ + compatible = "si5341"; + reg = <0x36>; + }; + + }; + i2c@2 { /* i2c mw 74 0 4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator2@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { /* i2c mw 74 0 8 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { /* i2c mw 74 0 10 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator4@69 {/* SI5328 - u20 */ + compatible = "silabs,si5328"; + reg = <0x69>; + }; + }; + i2c@5 { /* i2c mw 74 0 11 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; /* FAN controller */ + temp@4c {/* lm96163 - u128 */ + compatible = "national,lm96163"; + reg = <0x4c>; /* FIXME */ + }; + }; + /* 6 - 7 unconnected */ + }; + + i2cswitch@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { /* i2c mw 75 0 8 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + dev@19 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x19>; + }; + dev@30 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x30>; + }; + dev@35 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x35>; + }; + dev@36 { /* u-boot detection */ + compatible = "xxx"; + reg = <0x36>; + }; + dev@51 { /* u-boot detection - maybe SPD */ + compatible = "xxx"; + reg = <0x51>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&pcie { /* FIXME - no GT lines connected */ +/* status = "okay"; */ +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + xlnx,mio_bank = <1>; +}; + +&serdes { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + phy-names = "usb3-phy"; + phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>; +}; + +&xilinx_drm { + status = "okay"; + clocks = <&si570_1>; +}; + +&xlnx_dp { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&lane1 PHY_TYPE_DP 0 3 27000000>, <&lane0 PHY_TYPE_DP 1 3 27000000>; +}; + +&xlnx_dp_sub { + status = "okay"; + xlnx,vid-clk-pl; +}; + +&xlnx_dp_snd_pcm0 { + status = "okay"; +}; + +&xlnx_dp_snd_pcm1 { + status = "okay"; +}; + +&xlnx_dp_snd_card { + status = "okay"; +}; + +&xlnx_dp_snd_codec0 { + status = "okay"; +}; + +&xlnx_dpdma { + status = "okay"; +}; diff --git a/configs/xilinx_zynqmp_zcu106_defconfig b/configs/xilinx_zynqmp_zcu106_defconfig new file mode 100644 index 00000000000..3a4d6a03a33 --- /dev/null +++ b/configs/xilinx_zynqmp_zcu106_defconfig @@ -0,0 +1,68 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zcu106" +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_GPIO=y +CONFIG_ZYNQMP_QSPI=y +CONFIG_ZYNQMP_USB=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu106" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU106" +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="ZynqMP> " +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_EMBED=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DM_MMC=y +CONFIG_ZYNQ_SDHCI=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y +CONFIG_ZYNQ_GEM=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Xilinx" +CONFIG_G_DNL_VENDOR_NUM=0x03FD +CONFIG_G_DNL_PRODUCT_NUM=0x0300 +CONFIG_SPL_OF_LIBFDT=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/include/configs/xilinx_zynqmp_zcu106.h b/include/configs/xilinx_zynqmp_zcu106.h new file mode 100644 index 00000000000..898473bae5e --- /dev/null +++ b/include/configs/xilinx_zynqmp_zcu106.h @@ -0,0 +1,56 @@ +/* + * Configuration for Xilinx ZynqMP zcu106 + * + * (C) Copyright 2016 Xilinx, Inc. + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQMP_ZCU106_H +#define __CONFIG_ZYNQMP_ZCU106_H + +#define CONFIG_ZYNQ_SDHCI1 +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_I2C1 +#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CONFIG_SYS_NUM_I2C_BUSES 18 +#define CONFIG_SYS_I2C_BUSES { \ + {0, {I2C_NULL_HOP} }, \ + {0, {{I2C_MUX_PCA9544, 0x75, 0} } }, \ + {0, {{I2C_MUX_PCA9544, 0x75, 1} } }, \ + {0, {{I2C_MUX_PCA9544, 0x75, 2} } }, \ + {1, {I2C_NULL_HOP} }, \ + {1, {{I2C_MUX_PCA9548, 0x74, 0} } }, \ + {1, {{I2C_MUX_PCA9548, 0x74, 1} } }, \ + {1, {{I2C_MUX_PCA9548, 0x74, 2} } }, \ + {1, {{I2C_MUX_PCA9548, 0x74, 3} } }, \ + {1, {{I2C_MUX_PCA9548, 0x74, 4} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 0} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 1} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 2} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 3} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 4} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 5} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 6} } }, \ + {1, {{I2C_MUX_PCA9548, 0x75, 7} } }, \ + } + +#define CONFIG_SYS_I2C_ZYNQ +#define CONFIG_PCA953X +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO + +#define CONFIG_SATA_CEVA + +#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} + +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_CMD_EEPROM +#define CONFIG_ZYNQ_EEPROM_BUS 5 +#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x54 +#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20 + +#include + +#endif /* __CONFIG_ZYNQMP_ZCU106_H */ -- 2.47.3