From 21927e94caa5ae05ab2361a5c6e63d52624e8381 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Tue, 6 Aug 2024 10:45:43 +0100 Subject: [PATCH] arm64: dts: qcom: sc8280xp-x13s: Enable RGB sensor Enable the main RGB sensor on the Lenovo x13s a five megapixel 2 lane DPHY MIPI sensor connected to cisphy0. With the pm8008 patches recently applied to the x13s dtsi we can now also enable the RGB sensor. Once done we have all upstream support necessary for the RGB sensor on x13s. Reviewed-by: Vladimir Zapolskiy Signed-off-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20240806-b4-linux-next-24-07-31-camss-sc8280xp-lenovo-rgb-v2-v3-1-199767fb193d@linaro.org Signed-off-by: Bjorn Andersson --- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index a7c5a3f5926c7..6a28cab971891 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -592,6 +592,57 @@ }; }; +&camss { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; + + ports { + port@0 { + csiphy0_lanes01_ep: endpoint@0 { + reg = <0>; + clock-lanes = <7>; + data-lanes = <0 1>; + remote-endpoint = <&ov5675_ep>; + }; + }; + }; +}; + +&cci2 { + status = "okay"; +}; + +&cci2_i2c1 { + camera@10 { + compatible = "ovti,ov5675"; + reg = <0x10>; + + reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_rgb_default>; + + clocks = <&camcc CAMCC_MCLK3_CLK>; + + orientation = <0>; /* Front facing */ + + avdd-supply = <&vreg_l6q>; + dvdd-supply = <&vreg_l2q>; + dovdd-supply = <&vreg_l7q>; + + port { + ov5675_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + remote-endpoint = <&csiphy0_lanes01_ep>; + }; + }; + + }; +}; + &dispcc0 { status = "okay"; }; @@ -1436,6 +1487,22 @@ bias-disable; }; + cam_rgb_default: cam-rgb-default-state { + mclk-pins { + pins = "gpio17"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + sc-rgb-xshut-n-pins { + pins = "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; -- 2.47.3