From 23ea56ef2288d27a1673e62c7c513d9265f97e90 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 1 Jun 2024 08:52:29 -0500 Subject: [PATCH] arm64: dts: imx8mp-beacon-kit: Fix errors found from CHECK_DTBS The adv7535 has some unnecessary entries which can be removed since they were not setup properly anyway and the defaults work just fine. Removing them and adding some required regulators make the errors detected from CHECK_DTBS go away: reg-names:1: 'edid' was expected reg-names:2: 'cec' was expected 'avdd-supply' is a required property 'dvdd-supply' is a required property 'pvdd-supply' is a required property 'a2vdd-supply' is a required property 'v3p3-supply' is a required property Signed-off-by: Adam Ford Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index da836172ae469..17e2c19d84551 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -302,12 +302,18 @@ adv_bridge: hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + reg-names = "main"; interrupt-parent = <&gpio4>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; #sound-dai-cells = <0>; + avdd-supply = <&buck5>; + dvdd-supply = <&buck5>; + pvdd-supply = <&buck5>; + a2vdd-supply = <&buck5>; + v1p2-supply = <&buck5>; + v3p3-supply = <&buck4>; ports { #address-cells = <1>; -- 2.47.3