From 50dce2e2f84b56d8b4b406d97a1543709e8a87f5 Mon Sep 17 00:00:00 2001 From: Abhishek Ojha Date: Wed, 15 Jul 2026 13:04:08 -0400 Subject: [PATCH] regulator: ltc3676: Fix incorrect IRQSTAT bit offsets The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT (Interrupt Request Status) register layout documented in Table 15 of the LTC3676/LTC3676-1 datasheet: bit 0 - Pushbutton Status Active bit 1 - Hard Reset Occurred bit 2 - PGOOD Timeout Occurred bit 3 - Undervoltage Warning bit 4 - Undervoltage Standby (Fault) Occurred bit 5 - Overtemperature Warning bit 6 - Overtemperature Standby (Fault) Occurred bit 7 - Reserved The driver instead defines these starting at bit 3, one bit higher than the datasheet specifies, which causes ltc3676_regulator_isr() to check the wrong status bits and misreport (or miss) PGOOD timeout, undervoltage and thermal warning/fault conditions. Fix the bit offsets to match the datasheet. Fixes: 37b918a034fe ("regulator: Add LTC3676 support") Cc: stable@vger.kernel.org Signed-off-by: Abhishek Ojha Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com Signed-off-by: Mark Brown --- drivers/regulator/ltc3676.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c index 73d511eb1c1d..768cdce0d4ec 100644 --- a/drivers/regulator/ltc3676.c +++ b/drivers/regulator/ltc3676.c @@ -45,11 +45,11 @@ #define LTC3676_DVBxA_REF_SELECT BIT(5) #define LTC3676_DVBxB_PGOOD_MASK BIT(5) -#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3) -#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4) -#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5) -#define LTC3676_IRQSTAT_THERMAL_WARN BIT(6) -#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7) +#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(2) +#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(3) +#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(4) +#define LTC3676_IRQSTAT_THERMAL_WARN BIT(5) +#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(6) enum ltc3676_reg { LTC3676_SW1, -- 2.47.3