From 70e633bedeeb4a7290d3b1dd9d49cc2bae25a46f Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 24 Jul 2025 13:22:10 +0900 Subject: [PATCH] i2c: designware: Fix clock issue when PM is disabled When the driver is removed, the clocks are first enabled by calling pm_runtime_get_sync(), and then disabled with pm_runtime_put_sync(). If CONFIG_PM=y, clocks for this controller are disabled when it's in the idle state. So the clocks are properly disabled when the driver exits. Othewise, the clocks are always enabled and the PM functions have no effect. Therefore, the driver exits without disabling the clocks. # cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count 18 # echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/bind # cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count 20 # echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/unbind # cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count 20 To ensure that the clocks can be disabled correctly even without CONFIG_PM=y, should add the following fixes: - Replace with pm_runtime_put_noidle(), which only decrements the runtime PM usage count. - Call i2c_dw_prepare_clk(false) to explicitly disable the clocks. Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM") Co-developed-by: Kohei Ito Signed-off-by: Kohei Ito Signed-off-by: Kunihiko Hayashi Tested-by: Jarkko Nikula Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index be2f9533cef94..3223da7018069 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -333,9 +333,11 @@ static void dw_i2c_plat_remove(struct platform_device *pdev) i2c_dw_disable(dev); pm_runtime_dont_use_autosuspend(device); - pm_runtime_put_sync(device); + pm_runtime_put_noidle(device); dw_i2c_plat_pm_cleanup(dev); + i2c_dw_prepare_clk(dev, false); + i2c_dw_remove_lock_support(dev); reset_control_assert(dev->rst); -- 2.47.3