From a89103f67112453fa36c9513e951c19eed9d2d92 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Mon, 22 Sep 2025 16:47:13 +0800 Subject: [PATCH] spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate Current operation contain the max_freq, so new coming operation may use new clock rate, need to re-config the clock rate to match the requirement. Fixes: 26851cf65ffc ("spi: nxp-fspi: Support per spi-mem operation frequency switches") Signed-off-by: Haibo Chen Link: https://patch.msgid.link/20250922-fspi-fix-v1-1-ff4315359d31@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-nxp-fspi.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index f9371f98a65b..4e82f9e900ac 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -404,6 +404,8 @@ struct nxp_fspi { #define FSPI_NEED_INIT BIT(0) #define FSPI_DTR_MODE BIT(1) int flags; + /* save the previous operation clock rate */ + unsigned long pre_op_rate; }; static inline int needs_ip_only(struct nxp_fspi *f) @@ -780,11 +782,17 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, uint64_t size_kb; /* - * Return, if previously selected target device is same as current - * requested target device. Also the DTR or STR mode do not change. + * Return when following condition all meet, + * 1, if previously selected target device is same as current + * requested target device. + * 2, the DTR or STR mode do not change. + * 3, previous operation max rate equals current one. + * + * For other case, need to re-config. */ if ((f->selected == spi_get_chipselect(spi, 0)) && - (!!(f->flags & FSPI_DTR_MODE) == op_is_dtr)) + (!!(f->flags & FSPI_DTR_MODE) == op_is_dtr) && + (f->pre_op_rate == op->max_freq)) return; /* Reset FLSHxxCR0 registers */ @@ -832,6 +840,8 @@ static void nxp_fspi_select_mem(struct nxp_fspi *f, struct spi_device *spi, else nxp_fspi_dll_override(f); + f->pre_op_rate = op->max_freq; + f->selected = spi_get_chipselect(spi, 0); } -- 2.47.3