From e35318d8d2d2dccc50454e3fc0bd9caaf2a797cd Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 19 Aug 2025 10:43:37 +0800 Subject: [PATCH] arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2 1, the phy support up to 8Mbit/s databitrate for CAN FD. refer to product data sheet: https://www.nxp.com/docs/en/data-sheet/TJA1463.pdf 2, the standby pin of the phy is ACTIVE_LOW. 3, the phy of flexcan2 connect the standby/en pin to PCAL6408 on i2c4 bus. Fixes: 02b7adb791e1 ("arm64: dts: imx95-19x19-evk: add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 and tpm3") Signed-off-by: Haibo Chen Reviewed-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index 2f949a0d48d2d..9d034275c8476 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -80,17 +80,17 @@ flexcan1_phy: can-phy0 { compatible = "nxp,tjr1443"; #phy-cells = <0>; - max-bitrate = <1000000>; + max-bitrate = <8000000>; enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>; - standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_HIGH>; + standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>; }; flexcan2_phy: can-phy1 { compatible = "nxp,tjr1443"; #phy-cells = <0>; - max-bitrate = <1000000>; - enable-gpios = <&i2c6_pcal6416 4 GPIO_ACTIVE_HIGH>; - standby-gpios = <&i2c6_pcal6416 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <8000000>; + enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>; + standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>; }; reg_vref_1v8: regulator-1p8v { -- 2.47.3