]>
git.ipfire.org Git - thirdparty/linux.git/commit
Merge tag 'pinctrl-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Implement the GPIO .get_direction() callback in the Mediatek driver
to rid dmesg warnings
- Mark the Qualcomm IPQ4019 pins used as GPIO as using the GPIO pin
function, so there is no conflict with orthogonal muxing
- Fix incorrect settings of the "PUPD" (pull-up-pull-down) register
during suspend/resume in the Renesas RZG2L
- Fix the SMT register cache to be per-bank in the Renesas RZG2L
- Fix the QDSS track clock and control pin group names in the Qualcomm
Eliza driver
- Fix a deadlock in the Amlogic driver, caused by playing around in
sysfs
- Fix some GPIO wakeup interrupt handling in Qualcomm QCS615. and a
similar fix for the Qualcomm SM8150
- Allow parsing DTs without explicit function nodes in the Freescale
i.MX1 driver
- Enable the IRQ for the WACF2200 touchscreen using a DMI quirk
* tag 'pinctrl-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl-amd: enable IRQ for WACF2200 touchscreen on Lenovo Yoga 7 14AGP11
pinctrl: imx1: Allow parsing DT without function nodes
pinctrl: qcom: Fix wakeirq map by removing disconnected irqs for sm8150
pinctrl: qcom: Fix GPIO to PDC wake irq map for qcs615
pinctrl: meson: amlogic-a4: fix deadlock issue
pinctrl: qcom: eliza: Fix QDSS trace clock/control pingroup names
pinctrl: renesas: rzg2l: Fix SMT register cache handling
pinctrl: renesas: rzg2l: Fix incorrect PUPD register offset for high pins during suspend/resume
pinctrl: qcom: ipq4019: mark gpio as a GPIO pin function
pinctrl: mediatek: moore: implement gpio_chip::get_direction()