udev-builtin-path_id: SAS wide ports must have num_phys > 1

udev-builtin-path_id: SAS wide ports must have num_phys > 1

Some kernel SAS drivers (e.g. smartpqi) expose ports with num_phys = 0. udev
shouldn't treat these ports as wide ports.  SAS wide ports always have
num_phys > 1. See comments for sas_port_add_phy() in the kernel sources.

Sample data from a smartpqi system to illustrate the issue below.
Here the phy device is attached to port 0:0, which has no end devices attached
and the SAS end device (where sda is attached) is associated with SAS
port 0:1, which has no associated phy device. Thus num_phys for port-0:1 is 0.
This is arguably wrong, but it's how smartpqi has always set up its devices in
sysfs.

/sys/class/sas_phy/phy-0:0 -> ../../devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/phy-0:0/sas_phy/phy-0:0
/sys/devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/port-0:0/phy-0:0 -> ../phy-0:0
/sys/devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/phy-0:0/port -> ../port-0:0

/sys/class/sas_device/end_device-0:1 -> ../../devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/port-0:1/end_device-0:1/sas_device/end_device-0:1
/sys/class/block/sda -> ../../devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/port-0:1/end_device-0:1/target0:0:0/0:0:0:0/block/sda

Signed-off-by: Martin Wilck <mwilck@suse.com>
(cherry picked from commit 7f6674624eedc95db2a9877edc6ff424f4453531)