NN6000v1 Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: K4B4G1646E-BCMA 512MiB x2 = 1 GiB
Flash: FORESEE 256GB eMMC
ETH: QCA8075 (2x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V
Button: Reset, Wps
USB: 1x 3.0
NN6000v2 Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: MT41K512M16VRN-107 IT:P 1GiB x2 = 2 GiB
Flash: FORESEE 256GB eMMC
ETH: QCA8075 (4x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V
Button: Reset, Wps
USB: 1x 3.0
Install via UART:
1. Download the initramfs image, rename it to
initramfs.itb, host it with the tftp server.
2. Interrupt U-Boot and run these commands:
tftpboot initramfs.itb
bootm
3. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Install via Uboot WebUI:
- Only work when you flash a custom uboot with webui
- Push the reset button for 5 seconds, then use broswer to
access http://192.168.1.1/, then upload factory.bin.
Signed-off-by: Fire Chen <firedevel@icloud.com>
Link: https://github.com/openwrt/openwrt/pull/21787
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
linksys,mr7500)
ubootenv_add_mtd "u_env" "0x0" "0x40000" "0x20000"
;;
+link,nn6000-v1|\
+link,nn6000-v2)
+ ubootenv_add_mmc "0:APPSBLENV" "" "0x0" "0x40000" "0x20000"
+ ;;
netgear,rbr350|\
netgear,rbs350|\
netgear,wax214|\
iodata_wn-dax3000gr \
jdcloud_re-cs-02 \
jdcloud_re-ss-01 \
+ link_nn6000 \
linksys_homewrk \
linksys_mr5500 \
linksys_mr6350 \
$(eval $(call generate-ipq-wifi-package,iodata_wn-dax3000gr,I-O DATA WN-DAX3000GR))
$(eval $(call generate-ipq-wifi-package,jdcloud_re-cs-02,JDCloud RE-CS-02))
$(eval $(call generate-ipq-wifi-package,jdcloud_re-ss-01,JDCloud RE-SS-01))
+$(eval $(call generate-ipq-wifi-package,link_nn6000,Link NN6000))
$(eval $(call generate-ipq-wifi-package,linksys_homewrk,Linksys HomeWRK))
$(eval $(call generate-ipq-wifi-package,linksys_mr5500,Linksys MR5500))
$(eval $(call generate-ipq-wifi-package,linksys_mr6350,Linksys MR6350))
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ipq6018-512m.dtsi"
+#include "ipq6018-ess.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart3;
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ /* Single RGB led controlled via GPIO.
+ To mimic the OEM default behaviour red are switched on from boot */
+ compatible = "gpio-leds";
+
+ led_status_red: status-red {
+ gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ default-state = "on";
+ };
+
+ led_status_green: status-green {
+ gpios = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led_status_blue: status-blue {
+ gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <20 1>;
+
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio64";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio65";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+ pinctrl-0 = <&serial_3_pins>;
+ pinctrl-names = "default";
+};
+
+&qusb_phy_0 {
+ status = "okay";
+};
+
+&ssphy_0 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&rpm {
+ status = "disabled";
+};
+
+&sdhc {
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+ qcom,ath11k-fw-memory-mode = <1>;
+ qcom,ath11k-calibration-variant = "Link-NN6000";
+};
+
+&edma {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6000-link.dtsi"
+
+/ {
+ model = "Link NN6000 v1";
+ compatible = "link,nn6000-v1", "qcom,ipq6018";
+
+ aliases {
+ ethernet1 = &dp2;
+ ethernet2 = &dp3;
+ ethernet3 = &dp4;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+ ethernet-phy-package@0 {
+ compatible = "qcom,qca8075-package";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ qca8075_1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <(ESS_PORT3 | ESS_PORT4)>;
+ switch_wan_bmp = <ESS_PORT2>;
+ switch_mac_mode = <MAC_MODE_PSGMII>;
+
+ qcom,port_phyinfo {
+ port@2 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+
+ port@3 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+
+ port@4 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+ };
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_1>;
+ label = "wan";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan1";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan2";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6000-link.dtsi"
+
+/ {
+ model = "Link NN6000 v2";
+ compatible = "link,nn6000-v2", "qcom,ipq6018";
+
+ aliases {
+ ethernet0 = &dp1;
+ ethernet1 = &dp2;
+ ethernet2 = &dp3;
+ ethernet3 = &dp4;
+ ethernet4 = &dp5;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+ ethernet-phy-package@0 {
+ compatible = "qcom,qca8075-package";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ qca8075_0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ qca8075_1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ qca8075_4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <(ESS_PORT1 | ESS_PORT3 | ESS_PORT4 | ESS_PORT5)>;
+ switch_wan_bmp = <ESS_PORT2>;
+ switch_mac_mode = <MAC_MODE_PSGMII>;
+
+ qcom,port_phyinfo {
+ port@1 {
+ port_id = <1>;
+ phy_address = <0>;
+ };
+
+ port@2 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+
+ port@3 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+
+ port@4 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+
+ port@5 {
+ port_id = <5>;
+ phy_address = <4>;
+ };
+ };
+};
+
+&dp1 {
+ status = "okay";
+ phy-handle = <&qca8075_0>;
+ label = "lan1";
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_1>;
+ label = "wan";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan2";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan3";
+};
+
+&dp5 {
+ status = "okay";
+ phy-handle = <&qca8075_4>;
+ label = "lan4";
+};
endef
TARGET_DEVICES += jdcloud_re-ss-01
+define Device/link_nn6000-v1
+ $(call Device/FitImage)
+ $(call Device/EmmcImage)
+ DEVICE_VENDOR := Link
+ DEVICE_MODEL := NN6000 v1
+ SOC := ipq6000
+ KERNEL_SIZE := 6144k
+ DEVICE_DTS_CONFIG := config@cp03-c1
+ DEVICE_PACKAGES := ipq-wifi-link_nn6000 kmod-fs-f2fs f2fs-tools
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-rootfs | append-metadata
+endef
+TARGET_DEVICES += link_nn6000-v1
+
+define Device/link_nn6000-v2
+ $(Device/link_nn6000-v1)
+ DEVICE_MODEL := NN6000 v2
+endef
+TARGET_DEVICES += link_nn6000-v2
+
define Device/linksys_mr
$(call Device/FitImage)
DEVICE_VENDOR := Linksys
case "$board" in
8devices,mango-dvk|\
- glinet,gl-axt1800)
+ glinet,gl-axt1800|\
+ link,nn6000-v1)
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
;;
alfa-network,ap120c-ax)
;;
glinet,gl-ax1800|\
jdcloud,re-cs-02|\
+ link,nn6000-v2|\
linksys,mr7350|\
linksys,mr7500|\
yuncore,fap650)
jdcloud,re-ss-01)
caldata_extract_mmc "0:ART" 0x1000 0x10000
;;
+ link,nn6000-v1|\
+ link,nn6000-v2)
+ caldata_extract_mmc "0:ART" 0x1000 0x10000
+ label_mac=$(mmc_get_mac_binary 0:ART 18)
+ ath11k_patch_mac $(macaddr_add $label_mac -4) 0
+ ath11k_patch_mac $(macaddr_add $label_mac -5) 1
+ ath11k_set_macflag
+ ;;
linksys,mr7350|\
linksys,mr7500)
caldata_extract "0:art" 0x1000 0x10000
;;
jdcloud,re-cs-02|\
jdcloud,re-cs-07|\
- jdcloud,re-ss-01)
+ jdcloud,re-ss-01|\
+ link,nn6000-v1|\
+ link,nn6000-v2)
local cfgpart=$(find_mmc_part "0:BOOTCONFIG")
part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 148 -C $cfgpart | cut -f 1 -d "|" | head -n1)"
if [ "$part_num" -eq "1" ]; then
projects / thirdparty / openwrt.git / commitdiff
