* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: log.h,v 1.57 2009/01/06 23:47:57 tbox Exp $ */
+/* $Id: log.h,v 1.58 2009/01/17 23:19:14 fdupont Exp $ */
#ifndef ISC_LOG_H
#define ISC_LOG_H 1
* number of named channels.) When multiple channels of the same
* name are defined, the most recent definition is found.
*
- *\li Specifing a very large number of channels for a category will have
+ *\li Specifying a very large number of channels for a category will have
* a moderate impact on performance in isc_log_write(), as each
* call looks up the category for the start of a linked list, which
* it follows all the way to the end to find matching modules. The
*\li lctx is a valid logging context.
*
*\li The category and module arguments must have ids that are in the
- * range of known ids, as estabished by isc_log_registercategories()
+ * range of known ids, as established by isc_log_registercategories()
* and isc_log_registermodules().
*
*\li level != #ISC_LOG_DYNAMIC. ISC_LOG_DYNAMIC is used only to define
*\li lctx is a valid logging context.
*
*\li The category and module arguments must have ids that are in the
- * range of known ids, as estabished by isc_log_registercategories()
+ * range of known ids, as established by isc_log_registercategories()
* and isc_log_registermodules().
*
*\li level != #ISC_LOG_DYNAMIC. ISC_LOG_DYNAMIC is used only to define
* declared facility.
* \endcode
*
- *\li Zero effort has been made (yet) to accomodate systems with openlog()
+ *\li Zero effort has been made (yet) to accommodate systems with openlog()
* that only takes two arguments, or to identify valid syslog
* facilities or options for any given architecture.
*
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: mem.h,v 1.78 2008/03/31 05:00:30 marka Exp $ */
+/* $Id: mem.h,v 1.79 2009/01/17 23:22:35 fdupont Exp $ */
#ifndef ISC_MEM_H
#define ISC_MEM_H 1
/*!<
* The variable isc_mem_debugging holds a set of flags for
* turning certain memory debugging options on or off at
- * runtime. Its is intialized to the value ISC_MEM_DEGBUGGING,
+ * runtime. It is initialized to the value ISC_MEM_DEGBUGGING,
* which is 0 by default but may be overridden at compile time.
* The following flags can be specified:
*
* Crash if a free doesn't match an allocation.
*
* \li #ISC_MEM_DEBUGUSAGE
- * If a hi_water mark is set, print the maximium inuse memory
+ * If a hi_water mark is set, print the maximum inuse memory
* every time it is raised once it exceeds the hi_water mark.
*
* \li #ISC_MEM_DEBUGSIZE
#define isc_mempool_get(c) isc__mempool_get((c) _ISC_MEM_FILELINE)
/*%
- * isc_mem_putanddetach() is a convienence function for use where you
+ * isc_mem_putanddetach() is a convenience function for use where you
* have a structure with an attached memory context.
*
* Given:
*
* When the memory usage of 'mctx' exceeds 'hiwater',
* '(water)(water_arg, #ISC_MEM_HIWATER)' will be called. 'water' needs to
- * call isc_mem_waterack() with #ISC_MEM_HIWATER to acknowlege the state
+ * call isc_mem_waterack() with #ISC_MEM_HIWATER to acknowledge the state
* change. 'water' may be called multiple times.
*
* When the usage drops below 'lowater', 'water' will again be called, this
* time with #ISC_MEM_LOWATER. 'water' need to calls isc_mem_waterack() with
- * #ISC_MEM_LOWATER to acknowlege the change.
+ * #ISC_MEM_LOWATER to acknowledge the change.
*
* static void
* water(void *arg, int mark) {
void
isc_mem_waterack(isc_mem_t *ctx, int mark);
/*%<
- * Called to acknowledge changes in signalled by calls to 'water'.
+ * Called to acknowledge changes in signaled by calls to 'water'.
*/
void
* and it is also used to set or get internal state via the isc_mempool_get*()
* and isc_mempool_set*() set of functions.
*
- * Mutiple pools can each share a single lock. For instance, if "manager"
+ * Multiple pools can each share a single lock. For instance, if "manager"
* type object contained pools for various sizes of events, and each of
* these pools used a common lock. Note that this lock must NEVER be used
* by other than mempool routines once it is given to a pool, since that can
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: netaddr.h,v 1.35 2007/06/18 23:47:44 tbox Exp $ */
+/* $Id: netaddr.h,v 1.36 2009/01/17 23:25:02 fdupont Exp $ */
#ifndef ISC_NETADDR_H
#define ISC_NETADDR_H 1
* Returns:
* ISC_R_SUCCESS
* ISC_R_RANGE prefixlen out of range
- * ISC_R_NOTIMPLENTED unsupported family
+ * ISC_R_NOTIMPLEMENTED unsupported family
* ISC_R_FAILURE extra bits.
*/
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: portset.h,v 1.3 2008/06/23 23:47:11 tbox Exp $ */
+/* $Id: portset.h,v 1.4 2009/01/17 23:28:05 fdupont Exp $ */
/*! \file isc/portset.h
- * \brief Transport Protocol Port Manipuration Module
+ * \brief Transport Protocol Port Manipulation Module
*
* This module provides simple utilities to handle a set of transport protocol
* (UDP or TCP) port numbers, e.g., for creating an ACL list. An isc_portset_t
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: random.h,v 1.18 2007/06/19 23:47:18 tbox Exp $ */
+/* $Id: random.h,v 1.19 2009/01/17 23:29:57 fdupont Exp $ */
#ifndef ISC_RANDOM_H
#define ISC_RANDOM_H 1
/*! \file isc/random.h
* \brief Implements a random state pool which will let the caller return a
- * series of possibly non-reproducable random values.
+ * series of possibly non-reproducible random values.
*
* Note that the
* strength of these numbers is not all that high, and should not be
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: ratelimiter.h,v 1.21 2007/06/19 23:47:18 tbox Exp $ */
+/* $Id: ratelimiter.h,v 1.22 2009/01/17 23:31:36 fdupont Exp $ */
#ifndef ISC_RATELIMITER_H
#define ISC_RATELIMITER_H 1
isc_result_t
isc_ratelimiter_setinterval(isc_ratelimiter_t *rl, isc_interval_t *interval);
/*!<
- * Set the mininum interval between event executions.
+ * Set the minimum interval between event executions.
* The interval value is copied, so the caller need not preserve it.
*
* Requires:
*\li Further attempts to enqueue events will fail with
* #ISC_R_SHUTTINGDOWN.
*
- *\li The reatelimiter is no longer attached to its task.
+ *\li The rate limiter is no longer attached to its task.
*/
void
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: serial.h,v 1.16 2007/06/19 23:47:18 tbox Exp $ */
+/* $Id: serial.h,v 1.17 2009/01/17 23:34:27 fdupont Exp $ */
#ifndef ISC_SERIAL_H
#define ISC_SERIAL_H 1
#include <isc/types.h>
/*! \file isc/serial.h
- * \brief Implement 32 bit serial space arithmetic comparision functions.
+ * \brief Implement 32 bit serial space arithmetic comparison functions.
* Note: Undefined results are returned as ISC_FALSE.
*/
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: sockaddr.h,v 1.55 2007/06/18 23:47:44 tbox Exp $ */
+/* $Id: sockaddr.h,v 1.56 2009/01/17 23:36:13 fdupont Exp $ */
#ifndef ISC_SOCKADDR_H
#define ISC_SOCKADDR_H 1
isc_boolean_t
isc_sockaddr_islinklocal(const isc_sockaddr_t *sa);
/*%<
- * Returns ISC_TRUE if the address is a link local addresss.
+ * Returns ISC_TRUE if the address is a link local address.
*/
isc_boolean_t
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: socket.h,v 1.85 2008/09/04 07:46:02 marka Exp $ */
+/* $Id: socket.h,v 1.86 2009/01/17 23:38:18 fdupont Exp $ */
#ifndef ISC_SOCKET_H
#define ISC_SOCKET_H 1
* Set ownership and file permissions on the UNIX domain socket.
*
* Note: On Solaris and SunOS this secures the directory containing
- * the socket as Solaris and SunOS do not honour the filesytem
+ * the socket as Solaris and SunOS do not honour the filesystem
* permissions on the socket.
*
* Requires:
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: symtab.h,v 1.24 2007/06/19 23:47:18 tbox Exp $ */
+/* $Id: symtab.h,v 1.25 2009/01/17 23:39:55 fdupont Exp $ */
#ifndef ISC_SYMTAB_H
#define ISC_SYMTAB_H 1
/*! \file isc/symtab.h
* \brief Provides a simple memory-based symbol table.
*
- * Keys are C strings, and key comparisons are case-insenstive. A type may
+ * Keys are C strings, and key comparisons are case-insensitive. A type may
* be specified when looking up, defining, or undefining. A type value of
* 0 means "match any type"; any other value will only match the given
* type.
* PERFORMANCE OF THIS SOFTWARE.
*/
-/* $Id: task.h,v 1.61 2007/06/18 23:47:44 tbox Exp $ */
+/* $Id: task.h,v 1.62 2009/01/17 23:42:01 fdupont Exp $ */
#ifndef ISC_TASK_H
#define ISC_TASK_H 1
* Consumers of events should purge, not unsend.
*
* Producers of events often want to remove events when the caller indicates
- * it is no longer interested in the object, e.g. by cancelling a timer.
+ * it is no longer interested in the object, e.g. by canceling a timer.
* Sometimes this can be done by purging, but for some event types, the
* calls to isc_event_free() cause deadlock because the event free routine
* wants to acquire a lock the caller is already holding. Unsending instead
* because it would block forever waiting for the event action to
* complete. An event action that wants to cause task manager shutdown
* should request some non-event action thread of execution to do the
- * shutdown, e.g. by signalling a condition variable or using
+ * shutdown, e.g. by signaling a condition variable or using
* isc_app_shutdown().
*
*\li Task manager references are not reference counted, so the caller
projects / thirdparty / bind9.git / commitdiff
