#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2004-12-17.09
+scriptversion=2006-01-12.21
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-chmodcmd="$chmodprog 0755"
+posix_glob=
+posix_mkdir=
+
+# Symbolic mode for testing mkdir with directories.
+# It is the same as 755, but also tests that "u+" works.
+test_mode=u=rwx,g=rx,o=rx,u+wx
+
+# Desired mode of installed file.
+mode=0755
+
+# Desired mode of newly created intermediate directories.
+# It is empty if not known yet.
+intermediate_mode=
+
+chmodcmd=$chmodprog
chowncmd=
chgrpcmd=
stripcmd=
shift
continue;;
- --help) echo "$usage"; exit 0;;
+ --help) echo "$usage"; exit $?;;
- -m) chmodcmd="$chmodprog $2"
+ -m) mode=$2
shift
shift
continue;;
shift
continue;;
- --version) echo "$0 $scriptversion"; exit 0;;
+ --version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
exit 0
fi
+test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
+
for src
do
# Protect names starting with `-'.
if test -n "$dir_arg"; then
dst=$src
- src=
-
- if test -d "$dst"; then
- mkdircmd=:
- chmodcmd=
- else
- mkdircmd=$mkdirprog
- fi
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
else
+
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
- dst=$dst/`basename "$src"`
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
fi
fi
- # This sed command emulates the dirname command.
- dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
- # Make sure that the destination directory exists.
-
- # Skip lots of stat calls in the usual case.
- if test ! -d "$dstdir"; then
- defaultIFS='
- '
- IFS="${IFS-$defaultIFS}"
-
- oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
- set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
- shift
- IFS=$oIFS
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ posix_mkdir=false
+ if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
+ posix_mkdir=true
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
+ fi ;;
+ esac
- pathcomp=
+ if
+ $posix_mkdir && {
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, create it using the same intermediate mode that
+ # mkdir -p would use when creating intermediate directories.
+ # POSIX says that this mode is "$(umask -S),u+wx", so use that
+ # if umask -S works.
+
+ if test -n "$dir_arg"; then
+ mkdir_mode=$mode
+ else
+ case $intermediate_mode in
+ '')
+ if umask_S=`(umask -S) 2>/dev/null`; then
+ intermediate_mode=$umask_S,u+wx
+ else
+ intermediate_mode=$test_mode
+ fi ;;
+ esac
+ mkdir_mode=$intermediate_mode
+ fi
+
+ $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
+ }
+ then :
+ else
- while test $# -ne 0 ; do
- pathcomp=$pathcomp$1
+ # mkdir does not conform to POSIX, or it failed possibly due to
+ # a race condition. Create the directory the slow way, step by
+ # step, checking for races as we go.
+
+ case $dstdir in
+ /*) pathcomp=/ ;;
+ -*) pathcomp=./ ;;
+ *) pathcomp= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
shift
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # mkdir can fail with a `File exist' error in case several
- # install-sh are creating the directory concurrently. This
- # is OK.
- test -d "$pathcomp" || exit
- fi
- pathcomp=$pathcomp/
- done
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # Don't fail if two instances are running concurrently.
+ test -d "$pathcomp" || exit 1
+ fi
+ pathcomp=$pathcomp/
+ done
+ obsolete_mkdir_used=true
+ fi
fi
if test -n "$dir_arg"; then
- $doit $mkdircmd "$dst" \
- && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
else
- dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
- trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
# Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
- if test -f "$dstdir/$dstfile"; then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
- || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
|| {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
else
} &&
# Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ $doit $mvcmd "$dsttmp" "$dst"
}
- }
- fi || { (exit 1); exit 1; }
-done
+ } || exit 1
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
- (exit 0); exit 0
-}
+ trap '' 0
+ fi
+done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
#!/bin/sh
# Get modification time of a file or directory and pretty-print it.
-scriptversion=2004-12-08.12
+scriptversion=2005-06-29.22
-# Copyright (C) 1995, 1996, 1997, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005 Free Software
+# Foundation, Inc.
# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
#
# This program is free software; you can redistribute it and/or modify
Report bugs to <bug-automake@gnu.org>.
EOF
- exit 0
+ exit $?
;;
-v | --v*)
echo "mdate-sh $scriptversion"
- exit 0
+ exit $?
;;
esac
LC_TIME=C
export LC_TIME
-save_arg1="$1"
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable. Since we cannot assume `unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+ TIME_STYLE=posix-long-iso
+ export TIME_STYLE
+fi
+
+save_arg1=$1
# Find out how to get the extended ls output of a file or directory.
if ls -L /dev/null 1>/dev/null 2>&1; then
done
# Get the extended ls output of the file or directory.
-set x`eval "$ls_command \"\$save_arg1\""`
+set dummy x`eval "$ls_command \"\$save_arg1\""`
# Remove all preceding arguments
eval $command
-# Get the month. Next argument is day, followed by the year or time.
-case $1 in
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
Jan) month=January; nummonth=1;;
Feb) month=February; nummonth=2;;
Mar) month=March; nummonth=3;;
Dec) month=December; nummonth=12;;
esac
-day=$2
+case $3 in
+ ???*) day=$1;;
+ *) day=$3; shift;;
+esac
# Here we have to deal with the problem that the ls output gives either
# the time of day or the year.
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2004-09-07.08
+scriptversion=2006-01-12.21
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <bug-automake@gnu.org>."
- exit 0
+ exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
- exit 0
+ exit $?
;;
-*)
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
touch $file
;;
projects / thirdparty / autoconf.git / commitdiff
