Kconfig: net: restyle

Restyle all Kconfigs for "net":
Menu entries   : no space left
Menu attributes: 1 TAB
Help text      : 1 TAB + 2 spaces
Replace '---help---' by 'help'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5172b2bae8e531f33953a6fc82b6ee0654f07a15..4399c6c7a99c6a84b4cd82de65df804318b5ae3e 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -184,10 +184,10 @@ config CALXEDA_XGMAC
 config DWC_ETH_XGMAC
         bool
        select PHYLIB
-        help
-          This driver supports the Synopsys Designware Ethernet XGMAC (10G
-          Ethernet MAC) IP block. The IP supports many options for bus type,
-          clocking/reset structure, and feature list.
+       help
+         This driver supports the Synopsys Designware Ethernet XGMAC (10G
+         Ethernet MAC) IP block. The IP supports many options for bus type,
+         clocking/reset structure, and feature list.
 
 config DWC_ETH_XGMAC_SOCFPGA
        bool "Synopsys DWC Ethernet XGMAC device support for SOCFPGA"
@@ -229,8 +229,8 @@ config DWC_ETH_QOS_ADI
        bool "Synopsys DWC Ethernet QOS device support for ADI SC59x-64 parts"
        depends on DWC_ETH_QOS && ARCH_SC5XX
        help
-               The Synopsis Designware Ethernet QoS IP block with the specific
-               configuration used in the ADI ADSP-SC59X 64 bit SoCs
+         The Synopsis Designware Ethernet QoS IP block with the specific
+         configuration used in the ADI ADSP-SC59X 64 bit SoCs
 
 config DWC_ETH_QOS_IMX
        bool "Synopsys DWC Ethernet QOS device support for IMX"
@@ -467,9 +467,9 @@ config FSL_FM_10GEC_REGULAR_NOTATION
        help
          On SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and
          MAC as below:
-               10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2
+         10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2
          While on SoCs T1024, etc, the notation between 10GEC and MAC as below:
-               10GEC1->MAC1, 10GEC2->MAC2
+         10GEC1->MAC1, 10GEC2->MAC2
          so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the
          new SoCs on which 10GEC enumeration is consistent with MAC
          enumeration.
@@ -536,7 +536,7 @@ config KSZ9477
 config LITEETH
        bool "LiteX LiteEth Ethernet MAC"
        help
-        Driver for the LiteEth Ethernet MAC from LiteX.
+         Driver for the LiteEth Ethernet MAC from LiteX.
 
 config MV88E6XXX
        bool "Marvell MV88E6xxx Ethernet switch DSA driver"
@@ -708,12 +708,12 @@ config SJA1105
          family. These are 5-port devices and are managed over an SPI
          interface. Probing is handled based on OF bindings. The driver
          supports the following revisions:
-           - SJA1105E (Gen. 1, No TT-Ethernet)
-           - SJA1105T (Gen. 1, TT-Ethernet)
-           - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
-           - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
-           - SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
-           - SJA1105S (Gen. 2, SGMII, TT-Ethernet)
+         - SJA1105E (Gen. 1, No TT-Ethernet)
+         - SJA1105T (Gen. 1, TT-Ethernet)
+         - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
+         - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
+         - SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
+         - SJA1105S (Gen. 2, SGMII, TT-Ethernet)
 
 config SMC911X
        bool "SMSC LAN911x and LAN921x controller driver"
@@ -747,11 +747,11 @@ config SUN4I_EMAC
          This driver supports the Allwinner based SUN4I Ethernet MAC.
 
 config SUN8I_EMAC
-        bool "Allwinner Sun8i Ethernet MAC support"
-        select PHYLIB
+       bool "Allwinner Sun8i Ethernet MAC support"
+       select PHYLIB
        select PHY_GIGE
-        help
-          This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
+       help
+         This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
          It can be found in H3/A64/A83T based SoCs and compatible with both
          External and Internal PHYs.
 
@@ -912,7 +912,7 @@ config FEC1_PHY
        help
          Define to the hardcoded PHY address which corresponds
          to the given FEC; i. e.
-               #define CONFIG_FEC1_PHY 4
+         #define CONFIG_FEC1_PHY 4
          means that the PHY with address 4 is connected to FEC1
 
          When set to -1, means to probe for first available.
@@ -936,7 +936,7 @@ config FEC2_PHY
        help
          Define to the hardcoded PHY address which corresponds
          to the given FEC; i. e.
-               #define CONFIG_FEC1_PHY 4
+         #define CONFIG_FEC1_PHY 4
          means that the PHY with address 4 is connected to FEC1
 
          When set to -1, means to probe for first available.
@@ -1041,7 +1041,7 @@ config MDIO_GPIO_BITBANG
        bool "GPIO bitbanging MDIO driver"
        depends on DM_MDIO && DM_GPIO
        help
-        Driver for bitbanging MDIO
+         Driver for bitbanging MDIO
 
 config MDIO_MUX_I2CREG
        bool "MDIO MUX accessed as a register over I2C"
@@ -1087,8 +1087,8 @@ config MDIO_MSCC_MIIM
        depends on DM_MDIO
        select REGMAP
        help
-               This driver supports MDIO interface found in Microsemi and Microchip
-               network switches.
+         This driver supports MDIO interface found in Microsemi and Microchip
+         network switches.
 
 config MDIO_MUX_MMIOREG
        bool "MDIO MUX accessed as a MMIO register access"

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 0025c895f125c06a5a141f53027120bfa729ee08..3f7953d693c90d5e9d8b4c8acf1e1fea8bd24637 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -81,7 +81,7 @@ config PHYLIB_10G
 config PHY_ADIN
        bool "Analog Devices Industrial Ethernet PHYs"
        help
-               Add support for configuring RGMII on Analog Devices ADIN PHYs.
+         Add support for configuring RGMII on Analog Devices ADIN PHYs.
 
 menuconfig PHY_AQUANTIA
        bool "Aquantia Ethernet PHYs support"
@@ -126,9 +126,9 @@ config SYS_CORTINA_NO_FW_UPLOAD
        bool "Cortina firmware loading support"
        depends on PHY_CORTINA
        help
-               Cortina phy has provision to store phy firmware in attached dedicated
-               EEPROM. And boards designed with such EEPROM does not require firmware
-               upload.
+         Cortina phy has provision to store phy firmware in attached dedicated
+         EEPROM. And boards designed with such EEPROM does not require firmware
+         upload.
 
 choice
        prompt "Location of the Cortina firmware"
@@ -167,7 +167,7 @@ config PHY_CORTINA_ACCESS
        default y
        depends on CORTINA_NI_ENET
        help
-               Cortina Access Ethernet PHYs init process
+         Cortina Access Ethernet PHYs init process
 
 config PHY_DAVICOM
        bool "Davicom Ethernet PHYs support"
@@ -317,13 +317,13 @@ config PHY_TERANETICS
 
 config PHY_TI
        bool "Texas Instruments Ethernet PHYs support"
-       ---help---
+       help
          Adds PHY registration support for TI PHYs.
 
 config PHY_TI_DP83867
        select PHY_TI
        bool "Texas Instruments Ethernet DP83867 PHY support"
-       ---help---
+       help
          Adds support for the TI DP83867 1Gbit PHY.
 
 config SPL_PHY_TI_DP83867
@@ -333,13 +333,13 @@ config SPL_PHY_TI_DP83867
 config PHY_TI_DP83869
        select PHY_TI
        bool "Texas Instruments Ethernet DP83869 PHY support"
-       ---help---
+       help
          Adds support for the TI DP83869 1Gbit PHY.
 
 config PHY_TI_GENERIC
        select PHY_TI
        bool "Texas Instruments Generic Ethernet PHYs support"
-       ---help---
+       help
          Adds support for Generic TI PHYs that don't need special handling but
          the PHY name is associated with a PHY ID.
 

diff --git a/drivers/net/ti/Kconfig b/drivers/net/ti/Kconfig
index 93c3a0c35f2e3ec48d1dff7478690b01e4e1b51a..2d72af8aade0b8b1140920e45e134569b3e5e520 100644 (file)
--- a/drivers/net/ti/Kconfig
+++ b/drivers/net/ti/Kconfig
@@ -14,7 +14,7 @@ config DRIVER_TI_EMAC
        bool "TI Davinci EMAC"
        depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
        help
-          Support for davinci emac
+         Support for davinci emac
 
 config DRIVER_TI_EMAC_USE_RMII
        depends on DRIVER_TI_EMAC
@@ -26,7 +26,7 @@ config DRIVER_TI_KEYSTONE_NET
        bool "TI Keystone 2 Ethernet"
        depends on ARCH_KEYSTONE
        help
-          This driver supports the TI Keystone 2 Ethernet subsystem
+         This driver supports the TI Keystone 2 Ethernet subsystem
 
 choice
        prompt "TI Keystone 2 Ethernet NETCP IP revision"