Update for MT2834ZDX and MT2834ZDXb

diff --git a/config/mt-1432 b/config/mt-1432
index e0b6671fffeb8dd0f4e4fa8e97d51c535b6b5186..ea1c28b38ab7375d1c168d7407a0d383222ff532 100644 (file)
--- a/config/mt-1432
+++ b/config/mt-1432
@@ -32,6 +32,8 @@
 # MT1432       firmware rev 0307 I or newer
 # MT132BG      rev 0109A
 # MT1932ZDX    rev 0109H
+# MT2834ZDX    rev 0316A or newer
+# MT2834ZDXb   rev 0317G or newer
 #
 # Note that MT1432 modems come in several varieties:
 #
@@ -52,17 +54,30 @@
 # and hardware connection/cabling (e.g. flow control).
 #
 ModemType:             Class2          # use class 2 interface
-ModemRate:             19200           # lock rate for DCE-DTE communication
+ModemRate:             38400           # lock rate for DCE-DTE communication
 ModemFlowControl:      rtscts          # default
 #
 ModemHardFlowCmd:      AT&E4           # hardware flow control
 ModemSoftFlowCmd:      AT&E5           # software flow control
 ModemSetupDTRCmd:      AT&D3           # setup so DTR drop resets modem
 ModemSetupDCDCmd:      AT&C1           # setup so DCD reflects carrier (or not)
+# The MT2834ZDX (and other newer models) may be more robust with this.
+#ModemSetupDCDCmd:     AT&C4           # setup so DCD resets modem on
+#                                      # carrier drop
+#
 ModemSetupAACmd:       AT+FAA=1        # enable adaptive-answer in class 2
 #
 # NB: some models get confused by @ in ModemDialCmd
+# NB: the @ causes some multifunction fax units to not go into fax mode.
 #
 ModemDialCmd:          ATDT%s          # T for tone dialing
 #
 Class2RecvDataTrigger: "\022"          # character sent to modem to start recv
+#
+# The MT2834ZDX (and other newer models) can take advantage of these.
+#Class2APQueryCmd:     AT              # AT+FAP=? not supported on this modem
+#Class2NFLOCmd:                AT+FLO=0        # Class 2: no flow control
+#Class2SFLOCmd:                AT+FLO=1        # Class 2: software flow control
+#Class2HFLOCmd:                AT+FLO=2        # Class 2: hardware flow control
+#Class2XmitWaitForXON: no
+#