arm64: zynqmp: Use keycode from input/input.h

zcu100 could use sw4 as key_power instead of key_down.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 4955368713eacf67a19ba16a4b5370137590022a..7cc0a9b0381a81538b27fda736ece0d429eeed55 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -12,6 +12,7 @@
 
 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 #include <dt-bindings/phy/phy.h>
@@ -52,7 +53,7 @@
                sw19 {
                        label = "sw19";
                        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                       linux,code = <108>; /* down */
+                       linux,code = <KEY_DOWN>;
                        gpio-key,wakeup;
                        autorepeat;
                };

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 0e24c85f195aa915e6fc8b9d992b4d944fe3e10d..81c73aab37b5bb0505b530faa0b2ed1ecf4eab4b 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -12,6 +12,7 @@
 
 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 #include <dt-bindings/phy/phy.h>
@@ -52,7 +53,7 @@
                sw19 {
                        label = "sw19";
                        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                       linux,code = <108>; /* down */
+                       linux,code = <KEY_DOWN>;
                        gpio-key,wakeup;
                        autorepeat;
                };

diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index bd9b8fd03312f18b8690fbfa6335a0306fcff34f..4debead8f5e53fa406fd1b9c59e43241c7e68ea4 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -12,6 +12,7 @@
 
 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 #include <dt-bindings/phy/phy.h>
@@ -52,7 +53,7 @@
                sw19 {
                        label = "sw19";
                        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                       linux,code = <108>; /* down */
+                       linux,code = <KEY_DOWN>;
                        gpio-key,wakeup;
                        autorepeat;
                };