USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL

The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option:
add support for Rolling Wireless RW135R-GL") was missing the
.driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop
modules (e.g. RW135-GL and RW350-GL).

Without this flag, the option driver incorrectly binds to the reserved
ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM
communication failures after mode switching. This matches the handling
of other Rolling Wireless MBIM devices.

- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
  interface for Linux/Chrome OS)

  0x1003: mbim, diag, AT, pipe

  Here are the outputs of usb-devices:

T:  Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=1003 Rev= 5.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling RW135R-GL Module
S:  SerialNumber=12345678
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
  interface for Linux/Chrome OS)

  0x1003: mbim, diag, AT, ADB, pipe

  Here are the outputs of usb-devices:

T:  Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=1003 Rev= 5.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling RW135R-GL Module
S:  SerialNumber=12345678
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

- VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM
  interface for Linux/Chrome OS)

  0x1003: mbim, pipe

  Here are the outputs of usb-devices:

T:  Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=1003 Rev= 5.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling RW135R-GL Module
S:  SerialNumber=12345678
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL")
Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 92c2feda3e3d98b611b6608b4f013f9bbc79aa5f..48ae0188f2e969074344f313561dc282534bcc97 100644 (file)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2476,7 +2476,8 @@ static const struct usb_device_id option_ids[] = {
        { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0302, 0xff) },                   /* Rolling RW101R-GL (laptop MBIM) */
        { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0802, 0xff),                     /* Rolling RW350-GL (laptop MBIM) */
          .driver_info = RSVD(5) },
-       { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff) },                   /* Rolling RW135R-GL (laptop MBIM) */
+       { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x1003, 0xff),                     /* Rolling RW135R-GL (laptop MBIM) */
+         .driver_info = RSVD(5) },
        { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x30) },    /* NetPrisma LCUK54-WWD for Global */
        { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0x00, 0x40) },
        { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0100, 0xff, 0xff, 0x40) },