Merge tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git...

Qualcomm Arm64 DeviceTree updates for v7.2

Introduce the Qualcomm IPQ9650 router/gateway platform and the RDP488
board. Add support for the Motorola Edge 30 and the Nothing Phone.

Describe the IPA block on the Agatti platform and missing OPP-levels for
the video encoder/decoder.

For Eliza, describe the QUP Serial Engines, GPI DMA, SDHCI, LLCC, IMEM,
QCE crypto, ADSP remoteproc and USB nodes. Enable DSI panel,
DisplayPort, USB, and ADSP support on the Eliza MTP.

On Glymur enable ADSP and CDSP remoteprocs, FastRPC, crypto hardware,
CPUfreq cooling devices, and coresight nodes. Enable the remoteprocs and
the LID sensor on the Glymur CRD.

Describe the CAN-FD controller found on the Hamoa EVK. Correct the
DisplayPort controller OPP tables.

Describe the watchdog on IPQ5210 and IPQ9650.

Describe USB controller and PHYs for the Kaanapali platform and enable
basic USB support on the MTP and QRD devices.

Enable the second display subsystem on Lemans and use this to enable
additional DisplayPort outputs on the Lemans Ride board, and IFP
mezzanine for the EVK. Also enable the GPIO expander on the Lemans EVK
to get the CAN signals out.

Add crypto hardware and qfprom nodes on Milos. Reduce the remotefs
shared memory size to avoid sanity checks in the modem firmware
rejecting the region.
Enable the vibrator on FairPhone FP6.

Add GPSDP FastRPC support on Monaco, and describe the Bluetooth
controller on the Arduino VENTUNO Q board.

Introduce an EL2 overlay for the Purwa IoT EVK.

Enable CAN bus controller on QCS6490 RB3gen2 and add a remotefs node.

Enable FastRPC on the SC8280XP ADSP.

Correct SDM630 and SDM660 ADSP FastRPC channel ids. Also add the ADSP
memory region on SDM630.

On SDM845 devices, enable NFC on Google Pixel 3, OnePlus 6, OnePlus 6T,
and SHIFT SHIFT6mq. Enable camera flash on LG devices. Rework the
framebuffer description on Samsung, SHIFT and Xiaomi devices. Enable
camera flash on LG devices. Fix Bluetooth and WiFi on LG and Xiaomi
devices.

Enable MDSS and the display panel on Xiaomi Mi A3.

Scale L3 and DDR clock votes based on CPUfreq selection.

Enable camera clock controller, cpufreq cooling devices, and correct the
DSI1 reference clock on SM8750.

On the Talos platform, describe the QSPI support, GPR and audio
services, and enable sound on the EVK target. Enable QSPI and describe
the SPINOR on this bus, on the QCS615 Ride.

Describe power-domain and iface clock for the Inline Crypto Engine (ICE)
across various platforms.

Fix the Bluetooth RFA supply name across a variety of devices.

* tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (131 commits)
  arm64: dts: qcom: add support for pixel 3a xl with the tianma panel
  arm64: dts: qcom: sdm670-google: add common device tree include
  arm64: dts: qcom: hamoa-iot-evk: add MCP2518FD CAN on spi18
  arm64: dts: qcom: sm8750: allow mode-switch events to reach the QMP Combo PHY
  arm64: dts: qcom: sc8280xp: drop unused polling-delay-passive properties
  arm64: dts: qcom: ipq5210: add watchdog node
  arm64: dts: qcom: sdm845-xiaomi-beryllium: Correct IPA FW path
  arm64: dts: qcom: monaco-arduino-monza: Add Bluetooth UART node
  arm64: dts: qcom: glymur: Add qfprom efuse node
  arm64: dts: qcom: milos: Add qfprom efuse node
  arm64: dts: qcom: glymur: add coresight nodes
  arm64: dts: qcom: qcs6490-rb3gen2: add rmtfs node
  arm64: dts: qcom: lemans-evk: Enable CAN RX via I2C GPIO expander
  arm64: dts: qcom: glymur: Fix wrong interrupt number for i2c19
  arm64: dts: qcom: Drop unused remoteproc_adsp_glink label
  arm64: dts: qcom: lemans: Add eDP ref clock for eDP PHYs
  arm64: dts: qcom: sm8750: Add power-domain and iface clk for ice node
  arm64: dts: qcom: sm8650: Add power-domain and iface clk for ice node
  arm64: dts: qcom: sm8550: Add power-domain and iface clk for ice node
  arm64: dts: qcom: sm8450: Add power-domain and iface clk for ice node
  ...

Signed-off-by: Linus Walleij <linusw@kernel.org>