Kconfig: cmd: restyle

Restyle all Kconfigs for "cmd":
Menu entries   : no space left
Menu attributes: 1 TAB
Help text      : 1 TAB + 2 spaces
Replace '---help---' by 'help'

Signed-off-by: Johan Jonker <jbx6244@gmail.com>

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 032e55e81276c58e8ff589496781ed59701ecce3..d0fb7397067ebc42d172ca275c29881e4894a81b 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -881,12 +881,12 @@ config EEPROM_LAYOUT_VERSIONS
          via the -l option.
 
 config EEPROM_LAYOUT_HELP_STRING
-         string "Tells user what layout names are supported"
-         depends on EEPROM_LAYOUT_VERSIONS
-         default "<not defined>"
-         help
-           Help printed with the LAYOUT VERSIONS part of the 'eeprom'
-           command's help.
+       string "Tells user what layout names are supported"
+       depends on EEPROM_LAYOUT_VERSIONS
+       default "<not defined>"
+       help
+         Help printed with the LAYOUT VERSIONS part of the 'eeprom'
+         command's help.
 
 config SYS_I2C_EEPROM_BUS
        int "I2C bus of the EEPROM device."
@@ -967,14 +967,14 @@ config CMD_MEMORY
        default y
        help
          Memory commands.
-           md - memory display
-           mm - memory modify (auto-incrementing address)
-           nm - memory modify (constant address)
-           mw - memory write (fill)
-           cp - memory copy
-           cmp - memory compare
-           base - print or set address offset
-           loop - initialize loop on address range
+         md - memory display
+         mm - memory modify (auto-incrementing address)
+         nm - memory modify (constant address)
+         mw - memory write (fill)
+         cp - memory copy
+         cmp - memory compare
+         base - print or set address offset
+         loop - initialize loop on address range
 
 config CMD_MEM_SEARCH
        bool "ms - Memory search"
@@ -1115,9 +1115,9 @@ config CMD_ARMFFA
        help
          Provides a test command for the FF-A support
          supported options:
-               - Listing the partition(s) info
-               - Sending a data pattern to the specified partition
-               - Displaying the arm_ffa device info
+         - Listing the partition(s) info
+         - Sending a data pattern to the specified partition
+         - Displaying the arm_ffa device info
 
 config CMD_ARMFLASH
        bool "armflash"
@@ -1214,9 +1214,9 @@ config CMD_FLASH
        depends on FLASH_CFI_DRIVER || MTD_NOR_FLASH
        help
          NOR flash support.
-           flinfo - print FLASH memory information
-           erase - FLASH memory
-           protect - enable or disable FLASH write protection
+         flinfo - print FLASH memory information
+         erase - FLASH memory
+         protect - enable or disable FLASH write protection
 
 config CMD_FPGA
        bool "fpga"
@@ -1548,7 +1548,7 @@ config CMD_OPTEE
        bool "Enable OP-TEE commands"
        depends on OPTEE
        help
-        OP-TEE commands support.
+         OP-TEE commands support.
 
 config CMD_MTD
        bool "mtd"
@@ -1606,7 +1606,7 @@ config CMD_MUX
        bool "mux"
        depends on MULTIPLEXER
        help
-        List, select, and deselect mux controllers on the fly.
+         List, select, and deselect mux controllers on the fly.
 
 config CMD_NAND
        bool "nand"
@@ -1814,7 +1814,7 @@ config CMD_UFS
        depends on UFS
        help
          "This provides commands to initialise and configure universal flash
-          subsystem devices"
+         subsystem devices"
 
 config CMD_USB
        bool "usb"
@@ -1936,7 +1936,7 @@ config CMD_SETEXPR
        default y
        help
          Evaluate boolean and math expressions and store the result in an env
-           variable.
+         variable.
          Also supports loading the value at a memory location into a variable.
          If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
 
@@ -2642,9 +2642,9 @@ config CMD_PSTORE_ECC_SIZE
        depends on CMD_PSTORE
        default "0"
        help
-       if non-zero, the option enables ECC support and specifies ECC buffer
-       size in bytes (1 is a special value, means 16 bytes ECC), should be
-       identical to ramoops.ramoops_ecc parameter used by kernel
+         if non-zero, the option enables ECC support and specifies ECC buffer
+         size in bytes (1 is a special value, means 16 bytes ECC), should be
+         identical to ramoops.ramoops_ecc parameter used by kernel
 
 endif
 
@@ -3156,15 +3156,15 @@ config CMD_AVB
        help
          Enables a "avb" command to perform verification of partitions using
          Android Verified Boot 2.0 functionality. It includes such subcommands:
-           avb init - initialize avb2 subsystem
-           avb read_rb - read rollback index
-           avb write_rb - write rollback index
-           avb is_unlocked - check device lock state
-           avb get_uuid - read and print uuid of a partition
-           avb read_part - read data from partition
-           avb read_part_hex - read data from partition and output to stdout
-           avb write_part - write data to partition
-           avb verify - run full verification chain
+         avb init - initialize avb2 subsystem
+         avb read_rb - read rollback index
+         avb write_rb - write rollback index
+         avb is_unlocked - check device lock state
+         avb get_uuid - read and print uuid of a partition
+         avb read_part - read data from partition
+         avb read_part_hex - read data from partition and output to stdout
+         avb write_part - write data to partition
+         avb verify - run full verification chain
 
 config CMD_STACKPROTECTOR_TEST
        bool "Test command for stack protector"
@@ -3194,7 +3194,7 @@ config CMD_UBI_RENAME
        depends on CMD_UBI
        help
          Enable a "ubi" command to rename ubi volume:
-          ubi rename <oldname> <newname>
+         ubi rename <oldname> <newname>
 
 config CMD_UBIFS
        tristate "Enable UBIFS - Unsorted block images filesystem commands"

diff --git a/cmd/ti/Kconfig b/cmd/ti/Kconfig
index 43fe9ef2f080ea738a356ac7c0737197815144f6..17cf867dd91d3055f9c1dd0a65d1477a9db2cfa8 100644 (file)
--- a/cmd/ti/Kconfig
+++ b/cmd/ti/Kconfig
@@ -4,24 +4,24 @@ config CMD_DDR3
        bool "command for verifying DDR features"
        depends on ARCH_KEYSTONE || DRA7XX
        help
-          Support for testing ddr3 on TI platforms. This command
-          supports memory verification, memory comapre and ecc
-          verification if supported.
+         Support for testing ddr3 on TI platforms. This command
+         supports memory verification, memory comapre and ecc
+         verification if supported.
 
 config CMD_DDR4
        bool "command for verifying DDRSS Inline ECC features"
        depends on ARCH_K3
        help
-          Support for testing DDRSS on TI platforms. This command supports
-          memory verification, memory compare and inline ECC verification
-          if supported.
+         Support for testing DDRSS on TI platforms. This command supports
+         memory verification, memory compare and inline ECC verification
+         if supported.
 
 config CMD_PD
        bool "command for verifying power domains"
        depends on TI_POWER_DOMAIN
        help
-          Debug command for K3 power domains. For this to work, the
-          K3 power domain driver must be enabled for the u-boot; by
-          default it is only enabled for SPL.
+         Debug command for K3 power domains. For this to work, the
+         K3 power domain driver must be enabled for the u-boot; by
+         default it is only enabled for SPL.
 
 endmenu