Some CS5536 code

diff --git a/grub-core/bus/usb/ehci.c b/grub-core/bus/usb/ehci.c
index 3784871a9cd4591176211e445d9926990f6d15f6..afcd08e69ab5dd396a4424cf2a6415c8cd9074cb 100644 (file)
--- a/grub-core/bus/usb/ehci.c
+++ b/grub-core/bus/usb/ehci.c
@@ -27,6 +27,7 @@
 #include <grub/cpu/io.h>
 #include <grub/time.h>
 #include <grub/loader.h>
+#include <grub/cs5536.h>
 
 GRUB_MOD_LICENSE ("GPLv3+");
 
@@ -455,7 +456,6 @@ static int NESTED_FUNC_ATTR
 grub_ehci_pci_iter (grub_pci_device_t dev,
                    grub_pci_id_t pciid __attribute__ ((unused)))
 {
-  grub_pci_address_t addr;
   grub_uint8_t release;
   grub_uint32_t class_code;
   grub_uint32_t interf;
@@ -473,48 +473,68 @@ grub_ehci_pci_iter (grub_pci_device_t dev,
 
   grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: begin\n");
 
-  addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
-  class_code = grub_pci_read (addr) >> 8;
-  interf = class_code & 0xFF;
-  subclass = (class_code >> 8) & 0xFF;
-  class = class_code >> 16;
-
-  /* If this is not an EHCI controller, just return.  */
-  if (class != 0x0c || subclass != 0x03 || interf != 0x20)
-    return 0;
-
-  grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: class OK\n");
-
-  /* Check Serial Bus Release Number */
-  addr = grub_pci_make_address (dev, GRUB_EHCI_PCI_SBRN_REG);
-  release = grub_pci_read_byte (addr);
-  if (release != 0x20)
+  if (pciid == GRUB_CS5536_PCIID)
     {
-      grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: Wrong SBRN: %0x\n",
-                   release);
-      return 0;
-    }
+      grub_uint64_t basereg;
 
-  grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: bus rev. num. OK\n");
-
-  /* Determine EHCI EHCC registers base address.  */
-  addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
-  base = grub_pci_read (addr);
-  addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG1);
-  base_h = grub_pci_read (addr);
-  /* Stop if registers are mapped above 4G - GRUB does not currently
-   * work with registers mapped above 4G */
-  if (((base & GRUB_PCI_ADDR_MEM_TYPE_MASK) != GRUB_PCI_ADDR_MEM_TYPE_32)
-      && (base_h != 0))
+      basereg = grub_cs5536_read_msr (dev, GRUB_CS5536_MSR_USB_EHCI_BASE);
+      if (!(basereg & GRUB_CS5536_MSR_USB_BASE_MEMORY_ENABLE))
+       {
+         /* Shouldn't happen.  */
+         grub_dprintf ("ehci", "No EHCI address is assigned\n");
+         return 0;
+       }
+      base = (basereg & GRUB_CS5536_MSR_USB_BASE_ADDR_MASK);
+      basereg |= GRUB_CS5536_MSR_USB_BASE_BUS_MASTER;
+      basereg &= ~GRUB_CS5536_MSR_USB_BASE_PME_ENABLED;
+      basereg &= ~GRUB_CS5536_MSR_USB_BASE_PME_STATUS;
+      basereg &= ~GRUB_CS5536_MSR_USB_BASE_SMI_ENABLE;
+      grub_cs5536_write_msr (dev, GRUB_CS5536_MSR_USB_EHCI_BASE, basereg);
+    }
+  else
     {
-      grub_dprintf ("ehci",
-                   "EHCI grub_ehci_pci_iter: registers above 4G are not supported\n");
-      return 1;
+      grub_pci_address_t addr;
+      addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS);
+      class_code = grub_pci_read (addr) >> 8;
+      interf = class_code & 0xFF;
+      subclass = (class_code >> 8) & 0xFF;
+      class = class_code >> 16;
+
+      /* If this is not an EHCI controller, just return.  */
+      if (class != 0x0c || subclass != 0x03 || interf != 0x20)
+       return 0;
+
+      grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: class OK\n");
+
+      /* Check Serial Bus Release Number */
+      addr = grub_pci_make_address (dev, GRUB_EHCI_PCI_SBRN_REG);
+      release = grub_pci_read_byte (addr);
+      if (release != 0x20)
+       {
+         grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: Wrong SBRN: %0x\n",
+                       release);
+         return 0;
+       }
+      grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: bus rev. num. OK\n");
+  
+      /* Determine EHCI EHCC registers base address.  */
+      addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0);
+      base = grub_pci_read (addr);
+      addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG1);
+      base_h = grub_pci_read (addr);
+      /* Stop if registers are mapped above 4G - GRUB does not currently
+       * work with registers mapped above 4G */
+      if (((base & GRUB_PCI_ADDR_MEM_TYPE_MASK) != GRUB_PCI_ADDR_MEM_TYPE_32)
+         && (base_h != 0))
+       {
+         grub_dprintf ("ehci",
+                       "EHCI grub_ehci_pci_iter: registers above 4G are not supported\n");
+         return 1;
+       }
+      
+      grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: 32-bit EHCI OK\n");
     }
 
-  grub_dprintf ("ehci", "EHCI grub_ehci_pci_iter: 32-bit EHCI OK\n");
-
-
   /* Allocate memory for the controller and fill basic values. */
   e = grub_zalloc (sizeof (*e));
   if (!e)
@@ -670,7 +690,7 @@ grub_ehci_pci_iter (grub_pci_device_t dev,
   /* Determine and change ownership. */
   /* EECP offset valid in HCCPARAMS */
   /* Ownership can be changed via EECP only */
-  if (eecp_offset >= 0x40)     
+  if (pciid != GRUB_CS5536_PCIID && eecp_offset >= 0x40)       
     {
       grub_pci_address_t pciaddr_eecp;
       pciaddr_eecp = grub_pci_make_address (dev, eecp_offset);

diff --git a/include/grub/cs5536.h b/include/grub/cs5536.h
index fcacb23e888ed826fbd06b35a9b349c9890feea1..6b5b424c843630ecb635b90ef808e99d9a95a63f 100644 (file)
--- a/include/grub/cs5536.h
+++ b/include/grub/cs5536.h
@@ -91,6 +91,7 @@
 #define GRUB_CS5536_MSR_USB_CONTROLLER_BASE 0x4000000a
 #define GRUB_CS5536_MSR_USB_OPTION_CONTROLLER_BASE 0x4000000b
 #define GRUB_CS5536_MSR_USB_BASE_ADDR_MASK     0x00ffffff00ULL
+#define GRUB_CS5536_MSR_USB_BASE_SMI_ENABLE    0x3f000000000000ULL
 #define GRUB_CS5536_MSR_USB_BASE_BUS_MASTER    0x0400000000ULL
 #define GRUB_CS5536_MSR_USB_BASE_MEMORY_ENABLE 0x0200000000ULL
 #define GRUB_CS5536_MSR_USB_BASE_PME_ENABLED       0x0800000000ULL