dt-bindings: input: Add Parade TC3408 touchscreen controller

The tc3408 touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms.

Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260108063524.742464-2-yelangyan@huaqin.corp-partner.google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/Documentation/devicetree/bindings/input/parade,tc3408.yaml b/Documentation/devicetree/bindings/input/parade,tc3408.yaml
new file mode 100644 (file)
index 0000000..30ffefb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/parade,tc3408.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/parade,tc3408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade TC3408 touchscreen controller
+
+maintainers:
+  - Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
+
+description: |
+  Parade TC3408 is a touchscreen controller supporting the I2C-HID protocol.
+  It requires a reset GPIO and two power supplies (3.3V and 1.8V).
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: parade,tc3408
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description: The 1.8V supply to the touchscreen.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vcc33-supply
+  - vccio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen: touchscreen@24 {
+        compatible = "parade,tc3408";
+        reg = <0x24>;
+
+        interrupt-parent = <&pio>;
+        interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&pio 126 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_tchscr_x>;
+        vccio-supply = <&pp1800_tchscr_report_disable>;
+      };
+    };