grep "file not found" rndc.out.ns2.$n > /dev/null || ret=1
$DIG $DIGOPTS +all @10.53.0.2 a.missing.example a > dig.out.ns2.post.$n || ret=1
grep "status: REFUSED" dig.out.ns2.post.$n > /dev/null || ret=1
-$PERL ../digcomp.pl dig.out.ns2.pre.$n dig.out.ns2.post.$n || ret=1
+digcomp dig.out.ns2.pre.$n dig.out.ns2.post.$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-# $Id: keygen.sh,v 1.15 2012/02/06 23:46:46 tbox Exp $
-
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=autosign
+
dumpit () {
echo "D:${debug}: dumping ${1}"
cat "${1}" | sed 's/^/D:/'
}
setup () {
- echo "I:setting up zone: $1"
+ echo_i "setting up zone: $1"
debug="$1"
zone="$1"
zonefile="${zone}.db"
copy_setports ns4/named.conf.in ns4/named.conf
copy_setports ns5/named.conf.in ns5/named.conf
-echo "I:generating keys and preparing zones"
+echo_i "generating keys and preparing zones"
cd ns1 && $SHELL keygen.sh
echo_i " is initially signed with a KSK and not a ZSK. ($n)"
ret=0
-$DIG $DIGOPTS @10.53.0.3 axfr inacksk3.example > dig.out.ns3.test$n
+$DIG $DIGOPTS @10.53.0.3 axfr inacksk3.example > dig.out.ns3.test$n
zskid=`awk '$4 == "DNSKEY" && $5 == 256 { print }' dig.out.ns3.test$n |
- $DSFROMKEY -A -2 -f - inacksk3.example | awk '{ print $4}' `
+ $DSFROMKEY -A -2 -f - inacksk3.example | awk '{ print $4}'`
grep "DNSKEY 7 2 " dig.out.ns3.test$n > /dev/null || ret=1
pattern="DNSKEY 7 2 [0-9]* [0-9]* [0-9]* ${zskid} "
awk='$4 == "RRSIG" && $5 == "DNSKEY" { printf "%05u\n", $11 }'
id=`awk "${awk}" dig.out.ns3.test$n`
-$SETTIME -D now+5 ns3/Kinacksk3.example.+007+${id}
-$RNDCCMD 10.53.0.3 loadkeys inacksk3.example
+$SETTIME -D now+5 ns3/Kinacksk3.example.+007+${id} > /dev/null 2>&1
+$RNDCCMD 10.53.0.3 loadkeys inacksk3.example 2>&1 | sed 's/^/ns3 /' | cat_i
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
echo_i " resigned after the active ZSK is deleted - stage 1: Verify that zone"
echo_i " is initially signed with a ZSK and not a KSK. ($n)"
ret=0
-$DIG $DIGOPTS @10.53.0.3 axfr inaczsk3.example > dig.out.ns3.test$n
+$DIG $DIGOPTS @10.53.0.3 axfr inaczsk3.example > dig.out.ns3.test$n
kskid=`awk '$4 == "DNSKEY" && $5 == 257 { print }' dig.out.ns3.test$n |
$DSFROMKEY -2 -f - inaczsk3.example | awk '{ print $4}' `
grep "CNAME 7 3 " dig.out.ns3.test$n > /dev/null || ret=1
END {print count}' dig.out.ns3.test$n`
test $count -eq 3 || ret=1
id=`awk '$4 == "RRSIG" && $5 == "CNAME" { printf "%05u\n", $11 }' dig.out.ns3.test$n`
-$SETTIME -D now+5 ns3/Kinaczsk3.example.+007+${id}
-$RNDCCMD 10.53.0.3 loadkeys inaczsk3.example
+$SETTIME -D now+5 ns3/Kinaczsk3.example.+007+${id} > /dev/null 2>&1
+$RNDCCMD 10.53.0.3 loadkeys inaczsk3.example 2>&1 | sed 's/^/ns3 /' | cat_i
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking for nsec3param signing record ($n)"
ret=0
-$RNDCCMD 10.53.0.3 signing -list autonsec3.example. > signing.out.test$n 2>&1
+$RNDCCMD 10.53.0.3 signing -list autonsec3.example. > signing.out.test$n 2>&1 | sed 's/^/ns3 /' | cat_i
grep "Pending NSEC3 chain 1 0 20 DEAF" signing.out.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ksk=`cat autoksk.key`
$SETTIME -K ns3 -P now -A now $zsk > /dev/null 2>&1
$SETTIME -K ns3 -P now -A now $ksk > /dev/null 2>&1
-$RNDCCMD 10.53.0.3 loadkeys autonsec3.example. 2>&1 | sed 's/^/I:ns3 /'
+$RNDCCMD 10.53.0.3 loadkeys autonsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i
echo_i "waiting for changes to take effect"
sleep 3
# Send rndc sync command to ns1, ns2 and ns3, to force the dynamically
# signed zones to be dumped to their zone files
echo_i "dumping zone files"
-$RNDCCMD 10.53.0.1 sync 2>&1 | sed 's/^/I:ns1 /'
-$RNDCCMD 10.53.0.2 sync 2>&1 | sed 's/^/I:ns2 /'
-$RNDCCMD 10.53.0.3 sync 2>&1 | sed 's/^/I:ns3 /'
+$RNDCCMD 10.53.0.1 sync 2>&1 | sed 's/^/ns1 /' | cat_i
+$RNDCCMD 10.53.0.2 sync 2>&1 | sed 's/^/ns2 /' | cat_i
+$RNDCCMD 10.53.0.3 sync 2>&1 | sed 's/^/ns3 /' | cat_i
echo_i "checking expired signatures were updated ($n)"
for i in 1 2 3 4 5 6 7 8 9
ret=0
$DIG $DIGOPTS +noauth a.oldsigs.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.oldsigs.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
- $PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n > digcomp.out.test$n || ret=1
+ digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
[ $ret = 0 ] && break
sleep 1
done
-if [ $ret != 0 ]; then cat digcomp.out.test$n; echo_i "failed"; fi
n=`expr $n + 1`
status=`expr $status + $ret`
grep "status: NOERROR" dig.out.ns3.ok.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
grep "NSEC3PARAM" dig.out.ns3.ok.test$n > /dev/null || ret=1
$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
grep "NSEC3PARAM" dig.out.ns3.nx.test$n > /dev/null && ret=1
$DIG $DIGOPTS +noauth q.nsec3-to-nsec.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3-to-nsec.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
grep "NSEC3PARAM" dig.out.ns3.nx.test$n > /dev/null && ret=1
$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl1.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 300 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
+awk 'BEGIN {r=0} $2 != 300 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl2.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 60 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
+awk 'BEGIN {r=0} $2 != 60 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl3.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 30 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
+awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl4.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 30 {r=1; print "I:found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1
+awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
ret=0
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth empty.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
|| ret=1
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \
|| ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
$SETTIME -I now -D now $file > /dev/null
file="ns3/`cat del2.key`.key"
$SETTIME -I now -D now $file > /dev/null
-$RNDCCMD 10.53.0.3 sign secure-to-insecure2.example. 2>&1 | sed 's/^/I:ns3 /'
+$RNDCCMD 10.53.0.3 sign secure-to-insecure2.example. 2>&1 | sed 's/^/ns3 /' | cat_i
for i in 0 1 2 3 4 5 6 7 8 9; do
ret=0
$DIG $DIGOPTS axfr secure-to-insecure2.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
$KEYGEN -3 -q -r $RANDFILE -K ns3 -P 0 -A +6d -I +38d -D +45d prepub.example > /dev/null
-$RNDCCMD 10.53.0.3 sign prepub.example 2>&1 | sed 's/^/I:ns1 /'
+$RNDCCMD 10.53.0.3 sign prepub.example 2>&1 | sed 's/^/ns1 /' | cat_i
newserial=$oldserial
try=0
while [ $oldserial -eq $newserial -a $try -lt 42 ]
# note previous zone serial number
oldserial=`$DIG $DIGOPTS +short soa . @10.53.0.1 | awk '{print $3}'`
-$RNDCCMD 10.53.0.1 loadkeys . 2>&1 | sed 's/^/I:ns1 /'
+$RNDCCMD 10.53.0.1 loadkeys . 2>&1 | sed 's/^/ns1 /' | cat_i
sleep 4
echo_i "revoking key to duplicated key ID"
-$SETTIME -R now -K ns2 Kbar.+005+30676.key > /dev/null
+$SETTIME -R now -K ns2 Kbar.+005+30676.key > /dev/null 2>&1
-$RNDCCMD 10.53.0.2 loadkeys bar. 2>&1 | sed 's/^/I:ns2 /'
+$RNDCCMD 10.53.0.2 loadkeys bar. 2>&1 | sed 's/^/ns2 /' | cat_i
echo_i "waiting for changes to take effect"
sleep 5
status=`expr $status + $ret`
echo_i "forcing full sign"
-$RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/I:ns1 /'
+$RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i
echo_i "waiting for change to take effect"
sleep 5
ret=0
$SETTIME -K ns3 -P now+3s -A none $zsk > /dev/null 2>&1
$SETTIME -K ns3 -P now+3s -A none $ksk > /dev/null 2>&1
-$RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/I:ns2 /'
+$RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i
echo_i "waiting for changes to take effect"
sleep 5
ret=0
$SETTIME -K ns3 -A now+3s $zsk > /dev/null 2>&1
$SETTIME -K ns3 -A now+3s $ksk > /dev/null 2>&1
-$RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/I:ns2 /'
+$RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i
echo_i "waiting for changes to take effect"
sleep 5
echo_i "forcing full sign with unreadable keys ($n)"
ret=0
chmod 0 ns1/K.+*+*.key ns1/K.+*+*.private || ret=1
-$RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/I:ns1 /'
+$RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i
$DIG $DIGOPTS . @10.53.0.1 dnskey > dig.out.ns1.test$n || ret=1
grep "status: NOERROR" dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
echo_i "test turning on auto-dnssec during reconfig ($n)"
ret=0
# first create a zone that doesn't have auto-dnssec
-$RNDCCMD 10.53.0.3 addzone reconf.example '{ type master; file "reconf.example.db"; };' 2>&1 | sed 's/^/I:ns3 /'
+$RNDCCMD 10.53.0.3 addzone reconf.example '{ type master; file "reconf.example.db"; };' 2>&1 | sed 's/^/ns3 /' | cat_i
rekey_calls=`grep "zone reconf.example.*next key event" ns3/named.run | wc -l`
[ "$rekey_calls" -eq 0 ] || ret=1
# ...then we add auto-dnssec and reconfigure
-$RNDCCMD 10.53.0.3 modzone reconf.example '{ type master; file "reconf.example.db"; allow-update { any; }; auto-dnssec maintain; };' 2>&1 | sed 's/^/I:ns3 /'
-$RNDCCMD 10.53.0.3 reconfig 2>&1 | sed 's/^/I:ns3 /'
+$RNDCCMD 10.53.0.3 modzone reconf.example '{ type master; file "reconf.example.db"; allow-update { any; }; auto-dnssec maintain; };' 2>&1 | sed 's/^/ns3 /' | cat_i
+$RNDCCMD 10.53.0.3 reconfig 2>&1 | sed 's/^/ns3 /' | cat_i
for i in 0 1 2 3 4 5 6 7 8 9; do
lret=0
rekey_calls=`grep "zone reconf.example.*next key event" ns3/named.run | wc -l`
status=`expr $status + $ret`
echo_i "setting CDS and CDNSKEY deletion times and calling 'rndc loadkeys'"
-$SETTIME -D sync now+2 `cat sync.key`
-$RNDCCMD 10.53.0.3 loadkeys sync.example
+$SETTIME -D sync now+2 `cat sync.key` > /dev/null
+$RNDCCMD 10.53.0.3 loadkeys sync.example | sed 's/^/ns3 /' | cat_i
echo_i "waiting for deletion to occur"
sleep 3
echo_i "check that zone with inactive KSK and active ZSK is properly autosigned ($n)"
ret=0
-$DIG $DIGOPTS @10.53.0.3 axfr inacksk2.example > dig.out.ns3.test$n
+$DIG $DIGOPTS @10.53.0.3 axfr inacksk2.example > dig.out.ns3.test$n
zskid=`awk '$4 == "DNSKEY" && $5 == 256 { print }' dig.out.ns3.test$n |
$DSFROMKEY -A -2 -f - inacksk2.example | awk '{ print $4}' `
echo_i "check that zone with inactive ZSK and active KSK is properly autosigned ($n)"
ret=0
-$DIG $DIGOPTS @10.53.0.3 axfr inaczsk2.example > dig.out.ns3.test$n
+$DIG $DIGOPTS @10.53.0.3 axfr inaczsk2.example > dig.out.ns3.test$n
grep "SOA 7 2" dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
echo_i " is now signed with the ZSK. ($n)"
ret=0
-$DIG $DIGOPTS @10.53.0.3 axfr inacksk3.example > dig.out.ns3.test$n
+$DIG $DIGOPTS @10.53.0.3 axfr inacksk3.example > dig.out.ns3.test$n
zskid=`awk '$4 == "DNSKEY" && $5 == 256 { print }' dig.out.ns3.test$n |
$DSFROMKEY -A -2 -f - inacksk3.example | awk '{ print $4}' `
echo_i " resigned after the active ZSK is deleted - stage 2: Verify that zone"
echo_i " is now signed with the KSK. ($n)"
ret=0
-$DIG $DIGOPTS @10.53.0.3 axfr inaczsk3.example > dig.out.ns3.test$n
+$DIG $DIGOPTS @10.53.0.3 axfr inaczsk3.example > dig.out.ns3.test$n
kskid=`awk '$4 == "DNSKEY" && $5 == 257 { print }' dig.out.ns3.test$n |
$DSFROMKEY -2 -f - inaczsk3.example | awk '{ print $4}' `
grep "CNAME 7 3 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null || ret=1
echo_i "check correctness of routine cache cleaning ($n)"
$DIG $DIGOPTS +tcp +keepopen -b 10.53.0.7 -f dig.batch > dig.out.ns2 || status=1
-$PERL ../digcomp.pl --lc dig.out.ns2 knowngood.dig.out || status=1
+digcomp --lc dig.out.ns2 knowngood.dig.out || status=1
n=`expr $n + 1`
echo_i "only one tcp socket was used ($n)"
echo_i "testing load of dynamic zone with various \$ORIGIN values ($n)"
ret=0
$DIG $DIGOPTS axfr dynamic @10.53.0.1 > dig.ns1.test$n
-$PERL ../digcomp.pl dig.ns1.test$n dynamic.good || ret=1
+digcomp dig.ns1.test$n dynamic.good || ret=1
test $ret -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "transfer of dynamic zone with various \$ORIGIN values ($n)"
ret=0
$DIG $DIGOPTS axfr dynamic @10.53.0.2 > dig.ns2.test$n
-$PERL ../digcomp.pl dig.ns2.test$n dynamic.good || ret=1
+digcomp dig.ns2.test$n dynamic.good || ret=1
test $ret -eq 0 || echo_i "failed"
status=`expr $status + $ret`
send
EOF
$DIG $DIGOPTS axfr dynamic @10.53.0.1 > dig.ns1.test$n
-$PERL ../digcomp.pl dig.ns1.test$n postupdate.good || ret=1
+digcomp dig.ns1.test$n postupdate.good || ret=1
test $ret -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "check SOA owner case is transfered to slave ($n)"
ret=0
$DIG $DIGOPTS axfr dynamic @10.53.0.2 > dig.ns2.test$n
-$PERL ../digcomp.pl dig.ns2.test$n postupdate.good || ret=1
+digcomp dig.ns2.test$n postupdate.good || ret=1
test $ret -eq 0 || echo_i "failed"
status=`expr $status + $ret`
send
EOF
$DIG $DIGOPTS axfr dynamic @10.53.0.1 > dig.ns1.test$n
-$PERL ../digcomp.pl dig.ns1.test$n postns1.good || ret=1
+digcomp dig.ns1.test$n postns1.good || ret=1
test $ret -eq 0 || echo_i "failed"
status=`expr $status + $ret`
echo_i "check A owner case is transfered to slave ($n)"
ret=0
$DIG $DIGOPTS axfr dynamic @10.53.0.2 > dig.ns2.test$n
-$PERL ../digcomp.pl dig.ns2.test$n postns1.good || ret=1
+digcomp dig.ns2.test$n postns1.good || ret=1
status=`expr $status + $ret`
echo_i "exit status: $status"
echo_i "checking for correct DS, obtaining key from file ($n)"
ret=0
-$CHECKDS -f ok.example.dnskey.db ok.example > checkds.out.$n || ret=1
+$CHECKDS -f ok.example.dnskey.db ok.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for correct DLV, looking up key via 'dig' ($n)"
ret=0
-$CHECKDS -l dlv.example ok.example > checkds.out.$n || ret=1
+$CHECKDS -l dlv.example ok.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for correct DLV, obtaining key from file ($n)"
ret=0
-$CHECKDS -l dlv.example -f ok.example.dnskey.db ok.example > checkds.out.$n || ret=1
+$CHECKDS -l dlv.example -f ok.example.dnskey.db ok.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for incorrect DS, lowronging up key via 'dig' ($n)"
ret=0
-$CHECKDS wrong.example > checkds.out.$n || ret=1
+$CHECKDS wrong.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for incorrect DS, obtaining key from file ($n)"
ret=0
-$CHECKDS -f wrong.example.dnskey.db wrong.example > checkds.out.$n || ret=1
+$CHECKDS -f wrong.example.dnskey.db wrong.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for incorrect DLV, lowronging up key via 'dig' ($n)"
ret=0
-$CHECKDS -l dlv.example wrong.example > checkds.out.$n || ret=1
+$CHECKDS -l dlv.example wrong.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for incorrect DLV, obtaining key from file ($n)"
ret=0
-$CHECKDS -l dlv.example -f wrong.example.dnskey.db wrong.example > checkds.out.$n || ret=1
+$CHECKDS -l dlv.example -f wrong.example.dnskey.db wrong.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
echo_i "checking for partially missing DS, looking up key via 'dig' ($n)"
ret=0
-$CHECKDS missing.example > checkds.out.$n || ret=1
+$CHECKDS missing.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-1.*missing' checkds.out.$n > /dev/null 2>&1 || ret=1
echo_i "checking for partially missing DS, obtaining key from file ($n)"
ret=0
-$CHECKDS -f missing.example.dnskey.db missing.example > checkds.out.$n || ret=1
+$CHECKDS -f missing.example.dnskey.db missing.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-1.*missing' checkds.out.$n > /dev/null 2>&1 || ret=1
echo_i "checking for partially missing DLV, looking up key via 'dig' ($n)"
ret=0
-$CHECKDS -l dlv.example missing.example > checkds.out.$n || ret=1
+$CHECKDS -l dlv.example missing.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-1.*missing' checkds.out.$n > /dev/null 2>&1 || ret=1
echo_i "checking for partially missing DLV, obtaining key from file ($n)"
ret=0
-$CHECKDS -l dlv.example -f missing.example.dnskey.db missing.example > checkds.out.$n || ret=1
+$CHECKDS -l dlv.example -f missing.example.dnskey.db missing.example > checkds.out.$n 2>&1 || ret=1
grep 'SHA-1.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-256.*found' checkds.out.$n > /dev/null 2>&1 || ret=1
grep 'SHA-1.*missing' checkds.out.$n > /dev/null 2>&1 || ret=1
echo_i "checking for entirely missing DS, looking up key via 'dig' ($n)"
ret=0
-$CHECKDS none.example > checkds.out.$n && ret=1
+$CHECKDS none.example > checkds.out.$n 2>&1 && ret=1
grep 'No DS' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
echo_i "checking for entirely missing DS, obtaining key from file ($n)"
ret=0
-$CHECKDS -f none.example.dnskey.db none.example > checkds.out.$n && ret=1
+$CHECKDS -f none.example.dnskey.db none.example > checkds.out.$n 2>&1 && ret=1
grep 'No DS' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
echo_i "checking for entirely missing DLV, looking up key via 'dig' ($n)"
ret=0
-$CHECKDS -l dlv.example none.example > checkds.out.$n && ret=1
+$CHECKDS -l dlv.example none.example > checkds.out.$n 2>&1 && ret=1
grep 'No DLV' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
echo_i "checking for entirely missing DLV, obtaining key from file ($n)"
ret=0
-$CHECKDS -l dlv.example -f none.example.dnskey.db none.example > checkds.out.$n && ret=1
+$CHECKDS -l dlv.example -f none.example.dnskey.db none.example > checkds.out.$n 2>&1 && ret=1
grep 'No DLV' checkds.out.$n > /dev/null 2>&1 || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth yy_yy.ignore.example. @10.53.0.1 a > dig.out.ns1.test$n || ret=1
$DIG $DIGOPTS +noauth yy_yy.ignore.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns1.test$n dig.out.ns2.test$n || ret=1
+digcomp dig.out.ns1.test$n dig.out.ns2.test$n || ret=1
grep "check-names warning yy_yy.ignore.example/A/IN" ns2/named.run > /dev/null || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
done
}
+digcomp() {
+ output=`$PERL $SYSTEMTESTTOP/digcomp.pl "$@"`
+ result=$?
+ [ -n "$output" ] && { echo "digcomp failed:"; echo "$output"; } | cat_i
+ return $result
+}
+
#
# Useful functions in test scripts
#
done
}
+cat_i() {
+ while read LINE ; do
+ echoinfo "I:$SYSTESTDIR:$LINE"
+ done
+}
+
+digcomp() {
+ output=`$PERL $SYSTEMTESTTOP/digcomp.pl "$@"`
+ result=$?
+ [ -n "$output" ] && { echo "digcomp failed:"; echo "$output"; } | cat_i
+ return $result
+}
+
#
# Useful functions in test scripts
#
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-# $Id: tests.sh,v 1.6 2007/06/19 23:47:01 tbox Exp $
-
SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh
try=`expr $try + 1`
sleep 1
else
- $PERL ../digcomp.pl dig.out.ns1.test dig.out.ns2.test || ret=1
+ digcomp dig.out.ns1.test dig.out.ns2.test || ret=1
break;
fi
done
try=`expr $try + 1`
sleep 1
else
- $PERL ../digcomp.pl dig.out.ns1.test dig.out.ns3.test || ret=1
+ digcomp dig.out.ns1.test dig.out.ns3.test || ret=1
break;
fi
done
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=dlv
+
(cd ../ns2 && $SHELL -e ./sign.sh || exit 1)
echo_i "dlv/ns1/sign.sh"
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=dlv
+
(cd ../ns3 && $SHELL -e ./sign.sh || exit 1)
echo_i "dlv/ns2/sign.sh"
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=dlv
+
echo_i "dlv/ns6/sign.sh"
zone=grand.child1.utld.
[ $ret = 0 ] && break
sleep 1
done
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
$DIG $DIGOPTS a.wild.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
-$PERL ../digcomp.pl dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
+digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "\*\.wild\.example\..*RRSIG NSEC" dig.out.ns4.test$n > /dev/null || ret=1
grep "\*\.wild\.example\..*NSEC z\.example" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
-$PERL ../digcomp.pl dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
+digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n
stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n
-$PERL ../digcomp.pl dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
+digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth q.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1
ret=0
$DIG $DIGOPTS b.wild.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS b.wild.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
ret=0
$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 txt > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.wild.optout.example. \
@10.53.0.4 txt > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
> dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.secure.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth empty.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
|| ret=1
$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \
|| ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
|| ret=1
$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.4 soa > dig.out.ns4.test$n \
|| ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +noauth +cdflag example. soa @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
+digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS q.example. soa @10.53.0.4 > dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag q.example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
+digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag a.bogus.example. soa @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
+digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +noauth +cdflag a.insecure.example. soa @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
+digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - these are looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns4.test$n || ret=1
$DIG $DIGOPTS +cdflag q.insecure.example. a @10.53.0.5 \
> dig.out.ns5.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
+digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - these are looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
ret=0
$DIG $DIGOPTS +noauth foo.example. any @10.53.0.2 > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.example. any @10.53.0.4 > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# 2 records in the zone, 1 NXT, 3 SIGs
grep "ANSWER: 6" dig.out.ns4.test$n > /dev/null || ret=1
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# the CNAME & its sig, the TXT and its SIG
grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# The DNAME & its sig, the TXT and its SIG, and the synthesized CNAME.
# It would be nice to test that the CNAME is being synthesized by the
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# The CNAME, NXT, and their SIGs
grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \
> dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1
> dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth example. SOA @10.53.0.6 \
> dig.out.ns6.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
# Note - this is looking for failure, hence the &&
grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null && ret=1
n=`expr $n + 1`
ret=0
$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.nsec3.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
@10.53.0.3 a > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth a.optout.example. \
@10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
ret=0
$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
ret=0
$DIG $DIGOPTS +noauth . @10.53.0.1 ds > dig.out.ns1.test$n || ret=1
$DIG $DIGOPTS +noauth . @10.53.0.4 ds > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns1.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns1.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
ret=0
$DIG $DIGOPTS +noauth 10.in-addr.arpa ds @10.53.0.2 >dig.out.ns2.test$n || ret=1
$DIG $DIGOPTS +noauth 10.in-addr.arpa ds @10.53.0.6 >dig.out.ns6.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns6.test$n || ret=1
grep "status: NOERROR" dig.out.ns6.test$n > /dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
test "$s2" = "$s3" && break
sleep 1
done
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
@10.53.0.3 dnskey > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth cnameandkey.secure.example. \
@10.53.0.4 dnskey > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
@10.53.0.3 key > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth cnameandkey.secure.example. \
@10.53.0.4 key > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
@10.53.0.3 key > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS +noauth cnamenokey.secure.example. \
@10.53.0.4 key > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null && ret=1
n=`expr $n + 1`
@10.53.0.3 dnskey > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS a.dnameandkey.secure.example. \
@10.53.0.4 dnskey > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "CNAME" dig.out.ns4.test$n > /dev/null || ret=1
grep "DNAME" dig.out.ns4.test$n > /dev/null || ret=1
@10.53.0.3 key > dig.out.ns3.test$n || ret=1
$DIG $DIGOPTS b.dnameandkey.secure.example. \
@10.53.0.4 key > dig.out.ns4.test$n || ret=1
-$PERL ../digcomp.pl dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
+digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1
grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1
grep "DNAME" dig.out.ns4.test$n > /dev/null || ret=1
n=`expr $n + 1`
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=filter-aaaa
+
dlvsets=
zone=signed.
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=filter-aaaa
+
dlvsets=
zone=signed.
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example1. txt @$hidden > dig.out.hidden || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example1. txt @$f1 > dig.out.f1 || ret=1
-$PERL ../digcomp.pl dig.out.hidden dig.out.f1 || ret=1
+digcomp dig.out.hidden dig.out.f1 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example2. txt @$root > dig.out.root || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example2. txt @$f1 > dig.out.f1 || ret=1
-$PERL ../digcomp.pl dig.out.root dig.out.f1 || ret=1
+digcomp dig.out.root dig.out.f1 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example2. txt @$root > dig.out.root || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example2. txt @$f1 > dig.out.f1 || ret=1
-$PERL ../digcomp.pl dig.out.root dig.out.f1 || ret=1
+digcomp dig.out.root dig.out.f1 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example4. txt @$hidden > dig.out.hidden || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example4. txt @$f1 > dig.out.f1 || ret=1
-$PERL ../digcomp.pl dig.out.hidden dig.out.f1 || ret=1
+digcomp dig.out.hidden dig.out.f1 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example1. txt @$hidden > dig.out.hidden || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example1. txt @$f2 > dig.out.f2 || ret=1
-$PERL ../digcomp.pl dig.out.hidden dig.out.f2 || ret=1
+digcomp dig.out.hidden dig.out.f2 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example2. txt @$root > dig.out.root || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example2. txt @$f2 > dig.out.f2 || ret=1
-$PERL ../digcomp.pl dig.out.root dig.out.f2 || ret=1
+digcomp dig.out.root dig.out.f2 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +noadd +noauth txt.example3. txt @$hidden > dig.out.hidden || ret=1
$DIG $DIGOPTS +noadd +noauth txt.example3. txt @$f2 > dig.out.f2 || ret=1
-$PERL ../digcomp.pl dig.out.hidden dig.out.f2 || ret=1
+digcomp dig.out.hidden dig.out.f2 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "testing that a ccTLD referral gets a full glue set from the root zone"
$DIG $DIGOPTS @10.53.0.1 foo.bar.fi. A >dig.out || status=1
-$PERL ../digcomp.pl --lc fi.good dig.out || status=1
+digcomp --lc fi.good dig.out || status=1
echo_i "testing that we find glue A RRs we are authoritative for"
$DIG +norec @10.53.0.1 -p ${PORT} foo.bar.xx. a >dig.out || status=1
echo_i "testing that we don't find out-of-zone glue"
$DIG $DIGOPTS @10.53.0.1 example.net. a > dig.out || status=1
-$PERL ../digcomp.pl noglue.good dig.out || status=1
+digcomp noglue.good dig.out || status=1
echo_i "exit status: $status"
[ $status -eq 0 ] || exit 1
};
EOF
-$RNDCCMD 10.53.0.1 reload
+$RNDCCMD 10.53.0.1 reload | sed 's/^/ns1 /' | cat_i
for i in 0 1 2 3 4 5 6 7 8 9
do
# modify the master
cp ns3/mytest1.db ns3/mytest.db
-$RNDCCMD 10.53.0.3 reload
+$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i
#wait for master to reload load
for i in 0 1 2 3 4 5 6 7 8 9
echo_i " this result should be AXFR"
cp ns3/subtest1.db ns3/subtest.db # change to sub.test zone, should be AXFR
-$RNDCCMD 10.53.0.3 reload
+$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i
#wait for master to reload zone
for i in 0 1 2 3 4 5 6 7 8 9
echo_i " this result should be IXFR"
cp ns3/mytest2.db ns3/mytest.db # change to test zone, should be IXFR
-$RNDCCMD 10.53.0.3 reload
+$RNDCCMD 10.53.0.3 reload | sed 's/^/ns3 /' | cat_i
# wait for master to reload zone
for i in 0 1 2 3 4 5 6 7 8 9
# Should be "switch to TCP" response
$DIG $DIGOPTS +notcp ixfr=1 test @10.53.0.4 > dig.out1 || ret=1
$DIG $DIGOPTS ixfr=1 +notcp test @10.53.0.4 > dig.out2 || ret=1
-$PERL ../digcomp.pl dig.out1 dig.out2 || ret=1
+digcomp dig.out1 dig.out2 || ret=1
awk '$4 == "SOA" { soacnt++} END {if (soacnt == 1) exit(0); else exit(1);}' dig.out1 || ret=1
awk '$4 == "SOA" { if ($7 == 4) exit(0); else exit(1);}' dig.out1 || ret=1
# Should be incremental transfer.
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=legacy
+
echo_i "sign edns512"
zone=edns512
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=legacy
+
echo_i "sign edns512-notcp"
zone=edns512-notcp
echo_i "1000 A records"
$DIG $DIGOPTS +tcp +norec 1000.example. @10.53.0.1 a > dig.out.1000 || status=1
# $DIG $DIGOPTS 1000.example. @10.53.0.1 a > knowngood.dig.out.1000
-$PERL ../digcomp.pl knowngood.dig.out.1000 dig.out.1000 || status=1
+digcomp knowngood.dig.out.1000 dig.out.1000 || status=1
echo_i "2000 A records"
$DIG $DIGOPTS +tcp +norec 2000.example. @10.53.0.1 a > dig.out.2000 || status=1
# $DIG $DIGOPTS 2000.example. @10.53.0.1 a > knowngood.dig.out.2000
-$PERL ../digcomp.pl knowngood.dig.out.2000 dig.out.2000 || status=1
+digcomp knowngood.dig.out.2000 dig.out.2000 || status=1
echo_i "3000 A records"
$DIG $DIGOPTS +tcp +norec 3000.example. @10.53.0.1 a > dig.out.3000 || status=1
# $DIG $DIGOPTS 3000.example. @10.53.0.1 a > knowngood.dig.out.3000
-$PERL ../digcomp.pl knowngood.dig.out.3000 dig.out.3000 || status=1
+digcomp knowngood.dig.out.3000 dig.out.3000 || status=1
echo_i "4000 A records"
$DIG $DIGOPTS +tcp +norec 4000.example. @10.53.0.1 a > dig.out.4000 || status=1
# $DIG $DIGOPTS 4000.example. @10.53.0.1 a > knowngood.dig.out.4000
-$PERL ../digcomp.pl knowngood.dig.out.4000 dig.out.4000 || status=1
+digcomp knowngood.dig.out.4000 dig.out.4000 || status=1
echo_i "exactly maximum rrset"
$DIG $DIGOPTS +tcp +norec +noedns a-maximum-rrset.example. @10.53.0.1 a > dig.out.a-maximum-rrset \
|| status=1
# $DIG $DIGOPTS a-maximum-rrset.example. @10.53.0.1 a > knowngood.dig.out.a-maximum-rrset
-$PERL ../digcomp.pl knowngood.dig.out.a-maximum-rrset dig.out.a-maximum-rrset || status=1
+digcomp knowngood.dig.out.a-maximum-rrset dig.out.a-maximum-rrset || status=1
echo_i "exceed maximum rrset (5000 A records)"
$DIG $DIGOPTS +tcp +norec +noadd 5000.example. @10.53.0.1 a > dig.out.exceed || status=1
echo
done > dig.out.$zone.$server
done
- $PERL ../digcomp.pl dig.out.$zone.1 dig.out.$zone.2 || ret=1
+ digcomp dig.out.$zone.1 dig.out.$zone.2 || ret=1
if [ $zone = "example" ]; then
- set -- 1 2
- $PERL ../digcomp.pl dig.out.$zone.1 dig.out.$zone.3 || ret=1
+ set -- 1 2
+ digcomp dig.out.$zone.1 dig.out.$zone.3 || ret=1
fi
done
[ $ret -eq 0 ] || echo_i "failed"
# managed-keys zone is already locked and the command below calls
# dns_zone_flush(), which also attempts to take that zone's lock
nsidx=$1
- $RNDCCMD 10.53.0.${nsidx} managed-keys sync | sed "s/^/I: ns${nsidx} /"
+ $RNDCCMD 10.53.0.${nsidx} managed-keys sync | sed "s/^/ns${nsidx} /" | cat_i
}
mkeys_status_on() {
$DIG $DIGOPTS a.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
grep "10.0.0.1" dig.out.ns3.test$n > /dev/null || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
[ $ret = 0 ] || echo_i "failed"
status=`expr $ret + $status`
$DIG $DIGOPTS a.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
grep "10.0.0.2" dig.out.ns3.test$n > /dev/null || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
[ $ret = 0 ] || echo_i "failed"
status=`expr $ret + $status`
$DIG $DIGOPTS a.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1
grep "10.0.0.4" dig.out.ns3.test$n > /dev/null || ret=1
-$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
+digcomp dig.out.ns2.test$n dig.out.ns3.test$n || ret=1
[ $ret = 0 ] || echo_i "failed"
status=`expr $ret + $status`
ret=0
echo_i "comparing pre-update copies to known good data"
-$PERL ../digcomp.pl knowngood.ns1.before dig.out.ns1 || ret=1
-$PERL ../digcomp.pl knowngood.ns1.before dig.out.ns2 || ret=1
+digcomp knowngood.ns1.before dig.out.ns1 || ret=1
+digcomp knowngood.ns1.before dig.out.ns2 || ret=1
[ $ret = 0 ] || { echo_i "failed"; status=1; }
ret=0
ret=0
echo_i "comparing post-update copies to known good data"
-$PERL ../digcomp.pl knowngood.ns1.after dig.out.ns1 || ret=1
-$PERL ../digcomp.pl knowngood.ns1.after dig.out.ns2 || ret=1
+digcomp knowngood.ns1.after dig.out.ns1 || ret=1
+digcomp knowngood.ns1.after dig.out.ns2 || ret=1
[ $ret = 0 ] || { echo_i "failed"; status=1; }
ret=0
ret=0
echo_i "comparing post-update copy to known good data"
-$PERL ../digcomp.pl knowngood.ns1.after dig.out.ns1 || ret=1
+digcomp knowngood.ns1.after dig.out.ns1 || ret=1
[ $ret = 0 ] || { echo_i "failed"; status=1; }
ret=0
ret=0
echo_i "comparing zones"
-$PERL ../digcomp.pl dig.out.ns1 dig.out.ns2 || ret=1
+digcomp dig.out.ns1 dig.out.ns2 || ret=1
[ $ret = 0 ] || { echo_i "failed"; status=1; }
echo_i "SIGKILL and restart server ns1"
ret=0
echo_i "comparing zones"
-$PERL ../digcomp.pl dig.out.ns1 dig.out.ns1.after || ret=1
+digcomp dig.out.ns1 dig.out.ns1.after || ret=1
[ $ret = 0 ] || { echo_i "failed"; status=1; }
echo_i "begin RT #482 regression test"
$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns1
$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd updated4.example.nil.\
@10.53.0.1 a > dig.out.ns1 || status=1
-$PERL ../digcomp.pl knowngood.ns1.afterstop dig.out.ns1 || ret=1
+digcomp knowngood.ns1.afterstop dig.out.ns1 || ret=1
[ $ret = 0 ] || { echo_i "failed"; status=1; }
ret=0
n=`expr $n + 1`
echo_i "adding a new zone into default NZD using rndc addzone ($n)"
$RNDCCMD 10.53.0.1 addzone "added.example { type master; file \"added.db\";
-};" 2>&1 | sed 's/^/I:ns1 /' | cat_i
+};" 2>&1 | sed 's/^/ns1 /' | cat_i
sleep 2
n=`expr $n + 1`
make_key () {
$RNDCCONFGEN -r $RANDFILE -k key$1 -A $3 -s 10.53.0.4 -p $2 \
- > ns4/key${1}.conf
+ > ns4/key${1}.conf 2> /dev/null
egrep -v '(^# Start|^# End|^# Use|^[^#])' ns4/key$1.conf | cut -c3- | \
sed 's/allow { 10.53.0.4/allow { any/' >> ns4/named.conf
}
echo_i "look for static-stub zone data with recursion (should be found) ($n)"
ret=0
$DIG $DIGOPTS +tcp +noauth data.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1
-$PERL ../digcomp.pl knowngood.dig.out.rec dig.out.ns2.test$n || ret=1
+digcomp knowngood.dig.out.rec dig.out.ns2.test$n || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
--- /dev/null
+#!/bin/sh
+#
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+#
+# Stop all hanging processes from any system tests.
+#
+
+SYSTEMTESTTOP=.
+. $SYSTEMTESTTOP/conf.sh
+
+for d in $SUBDIRS
+do
+ $SHELL stop.sh $d
+done
[ $ret = 0 ] && break
sleep 1
done
-$PERL ../digcomp.pl knowngood.dig.out.norec dig.out.ns3 || ret=1
+digcomp knowngood.dig.out.norec dig.out.ns3 || ret=1
[ $ret = 0 ] || { status=1; echo_i "failed"; }
echo_i "look for stub zone data with recursion (should be found) (pass=$pass)"
ret=0
$DIG $DIGOPTS +noauth +noadd data.child.example. @10.53.0.3 txt > dig.out.ns3 || ret=1
-$PERL ../digcomp.pl knowngood.dig.out.rec dig.out.ns3 || ret=1
+digcomp knowngood.dig.out.rec dig.out.ns3 || ret=1
[ $ret = 0 ] || { status=1; echo_i "failed"; }
[ $pass = 1 ] && {
echo_i "comparing pre-update copies to known good data ($n)"
ret=0
-$PERL ../digcomp.pl knowngood.before dig.out.ns1 || ret=1
-$PERL ../digcomp.pl knowngood.before dig.out.ns2 || ret=1
-$PERL ../digcomp.pl knowngood.before dig.out.ns3 || ret=1
+digcomp knowngood.before dig.out.ns1 || ret=1
+digcomp knowngood.before dig.out.ns2 || ret=1
+digcomp knowngood.before dig.out.ns3 || ret=1
if [ $ret != 0 ] ; then echo_i "failed"; status=`expr $status + $ret`; fi
echo_i "updating zone (signed) ($n)"
echo_i "comparing post-update copies to known good data ($n)"
ret=0
-$PERL ../digcomp.pl knowngood.after1 dig.out.ns1 || ret=1
-$PERL ../digcomp.pl knowngood.after1 dig.out.ns2 || ret=1
-$PERL ../digcomp.pl knowngood.after1 dig.out.ns3 || ret=1
+digcomp knowngood.after1 dig.out.ns1 || ret=1
+digcomp knowngood.after1 dig.out.ns2 || ret=1
+digcomp knowngood.after1 dig.out.ns3 || ret=1
if [ $ret != 0 ] ; then echo_i "failed"; status=`expr $status + $ret`; fi
echo_i "checking 'forwarding update for zone' is logged ($n)"
echo_i "comparing post-update copies to known good data ($n)"
ret=0
-$PERL ../digcomp.pl knowngood.after2 dig.out.ns1 || ret=1
-$PERL ../digcomp.pl knowngood.after2 dig.out.ns2 || ret=1
-$PERL ../digcomp.pl knowngood.after2 dig.out.ns3 || ret=1
+digcomp knowngood.after2 dig.out.ns1 || ret=1
+digcomp knowngood.after2 dig.out.ns2 || ret=1
+digcomp knowngood.after2 dig.out.ns3 || ret=1
if [ $ret != 0 ] ; then echo_i "failed"; status=`expr $status + $ret`; fi
n=`expr $n + 1`
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=verify
+
dumpit () {
echo "D:${debug}: dumping ${1}"
cat "${1}" | sed 's/^/D:/'
$DIG $DIGOPTS @10.53.0.3 a.example. any > dig.out.ns3.2 || status=1
echo_i "comparing ns3's initial a.example to one from reconfigured 10.53.0.2"
-$PERL ../digcomp.pl dig.out.ns3.1 dig.out.ns2.2 || status=1
+digcomp dig.out.ns3.1 dig.out.ns2.2 || status=1
echo_i "comparing ns3's initial a.example to one from reconfigured 10.53.0.3"
-$PERL ../digcomp.pl dig.out.ns3.1 dig.out.ns3.2 || status=1
+digcomp dig.out.ns3.1 dig.out.ns3.2 || status=1
echo_i "comparing ns2's initial a.example to one from reconfigured 10.53.0.4"
-$PERL ../digcomp.pl dig.out.ns2.1 dig.out.ns4.2 || status=1
+digcomp dig.out.ns2.1 dig.out.ns4.2 || status=1
echo_i "comparing ns2's initial a.example to one from reconfigured 10.53.0.3"
echo_i "(should be different)"
SYSTEMTESTTOP=../..
. $SYSTEMTESTTOP/conf.sh
+SYSTESTDIR=wildcard
+
dssets=
zone=dlv.
if test $tmp -eq 1 ; then status=1; fi
grep "^;" dig.out.ns3 | cat_i
-{ $PERL ../digcomp.pl dig1.good dig.out.ns2 || status=1; } | cat_i
+digcomp dig1.good dig.out.ns2 || status=1
-{ $PERL ../digcomp.pl dig1.good dig.out.ns3 || status=1; } | cat_i
+digcomp dig1.good dig.out.ns3 || status=1
n=`expr $n + 1`
echo_i "testing TSIG signed zone transfers"
if test $tmp -eq 1 ; then status=1; fi
grep "^;" dig.out.ns3 | cat_i
-{ $PERL ../digcomp.pl dig.out.ns2 dig.out.ns3 || status=1; } | cat_i
+digcomp dig.out.ns2 dig.out.ns3 || status=1
echo_i "reload servers for in preparation for ixfr-from-differences tests"
@10.53.0.3 axfr > dig.out.ns3 || tmp=1
grep "^;" dig.out.ns3 | cat_i
-{ $PERL ../digcomp.pl dig2.good dig.out.ns3 || tmp=1; } | cat_i
+digcomp dig2.good dig.out.ns3 || tmp=1
# ns3 has a journal iff it received an IXFR.
test -f ns3/example.bk || tmp=1
@10.53.0.3 axfr > dig.out.ns3 || tmp=1
grep "^;" dig.out.ns3 > /dev/null && cat_i dig.out.ns3
-{ $PERL ../digcomp.pl dig.out.ns6 dig.out.ns3 || tmp=1; } | cat_i
+digcomp dig.out.ns6 dig.out.ns3 || tmp=1
# ns3 has a journal iff it received an IXFR.
test -f ns3/master.bk || tmp=1
@10.53.0.1 axfr > dig.out.ns1 || tmp=1
grep "^;" dig.out.ns1 | cat_i
-{ $PERL ../digcomp.pl dig.out.ns6 dig.out.ns1 || tmp=1; } | cat_i
+digcomp dig.out.ns6 dig.out.ns1 || tmp=1
# ns6 has a journal iff it received an IXFR.
test -f ns6/slave.bk || tmp=1
@10.53.0.7 axfr > dig.out.ns7 || tmp=1
grep "^;" dig.out.ns1 | cat_i
-{ $PERL ../digcomp.pl dig.out.ns7 dig.out.ns1 || tmp=1; } | cat_i
+digcomp dig.out.ns7 dig.out.ns1 || tmp=1
# ns7 has a journal iff it generates an IXFR.
test -f ns7/slave.bk || tmp=1
$DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.2.$n
grep "status: NOERROR," dig.out.2.$n > /dev/null || tmp=1
$DIG -p ${PORT} axfr mapped @10.53.0.3 > dig.out.3.$n
-{ $PERL ../digcomp.pl knowngood.mapped dig.out.3.$n || tmp=1; } | cat_i
+digcomp knowngood.mapped dig.out.3.$n || tmp=1
if test $tmp != 0 ; then echo_i "failed"; fi
status=`expr $status + $tmp`
$DIG $DIGOPTS zone000099.example. @10.53.0.2 axfr > dig.out.ns2 || status=1
-$PERL ../digcomp.pl dig.out.ns1 dig.out.ns2 || status=1
+digcomp dig.out.ns1 dig.out.ns2 || status=1
sleep 15
$DIG $DIGOPTS a.changing. @10.53.0.2 a > dig.out.ns2 || status=1
-$PERL ../digcomp.pl dig.out.ns1 dig.out.ns2 || status=1
+digcomp dig.out.ns1 dig.out.ns2 || status=1
echo_i "exit status: $status"
[ $status -eq 0 ] || exit 1
projects / thirdparty / bind9.git / commitdiff
