--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
+ * https://www.toradex.com/products/carrier-board/aquila-development-board-kit
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95-aquila.dtsi"
+
+/ {
+ model = "Aquila iMX95 on Aquila Development Board";
+ compatible = "toradex,aquila-imx95-dev",
+ "toradex,aquila-imx95",
+ "fsl,imx95";
+
+ aliases {
+ eeprom1 = &carrier_eeprom;
+ };
+
+ dp_1_connector: dp0-connector {
+ compatible = "dp-connector";
+ dp-pwr-supply = <®_dp_3p3v>;
+ type = "full-size";
+
+ port {
+ dp_1_connector_in: endpoint {
+ remote-endpoint = <&dsi2dp_out>;
+ };
+ };
+ };
+
+ reg_carrier_1p8v: regulator-carrier-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "On-carrier 1V8";
+ };
+
+ reg_dp_3p3v: regulator-dp-3p3v {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_21_dp>;
+ /* Aquila GPIO_21_DP */
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "DP_3V3";
+ startup-delay-us = <10000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "aquila-wm8904";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "Microphone Jack", "MICBIAS",
+ "IN1L", "Microphone Jack",
+ "IN1R", "Digital Mic";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Digital Mic",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&wm8904_1a>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+ };
+};
+
+/* Aquila ADC_[1-4] */
+&adc1 {
+ status = "okay";
+};
+
+/* Aquila CTRL_WAKE1_MICO# */
+&aquila_key_wake {
+ status = "okay";
+};
+
+&dsi2dp_out {
+ remote-endpoint = <&dp_1_connector_in>;
+};
+
+/* Aquila ETH_1 */
+&enetc_port0 {
+ status = "okay";
+};
+
+/* Aquila CAN_1 */
+&flexcan1 {
+ status = "okay";
+};
+
+/* Aquila CAN_2 */
+&flexcan2 {
+ status = "okay";
+};
+
+/* Aquila CAN_3 */
+&flexcan3 {
+ status = "okay";
+};
+
+/* Aquila CAN_4 */
+&flexcan4 {
+ status = "okay";
+};
+
+/* Aquila QSPI_1 */
+&flexspi1 {
+ pinctrl-0 = <&pinctrl_flexspi1_4bit>,
+ <&pinctrl_qspi_cs1>;
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <66000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_8>;
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_1>,
+ <&pinctrl_gpio_2>,
+ <&pinctrl_gpio_3>,
+ <&pinctrl_gpio_4>,
+ <&pinctrl_gpio_5>,
+ <&pinctrl_gpio_6>,
+ <&pinctrl_gpio_7>;
+};
+
+/* Aquila I2C_1 */
+&lpi2c2 {
+ status = "okay";
+
+ fan_controller: fan@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ #pwm-cells = <2>;
+
+ fan {
+ cooling-levels = <255>;
+ pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+ };
+ };
+
+ wm8904_1a: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2_mclk>;
+ clocks = <&scmi_clk IMX95_CLK_SAI2>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ AVDD-supply = <®_carrier_1p8v>;
+ CPVDD-supply = <®_carrier_1p8v>;
+ DBVDD-supply = <®_carrier_1p8v>;
+ DCVDD-supply = <®_carrier_1p8v>;
+ MICVDD-supply = <®_carrier_1p8v>;
+ wlf,drc-cfg-names = "default", "peaklimiter";
+ /*
+ * Config registers per name, respectively:
+ * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1
+ * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1
+ */
+ wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x0408>;
+ /* GPIO1 = DMIC_CLK, don't touch others */
+ wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+ wlf,in1r-as-dmicdat2;
+ };
+
+ /* Current measurement into module VCC */
+ hwmon@41 {
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+
+ temperature-sensor@4f {
+ compatible = "ti,tmp1075";
+ reg = <0x4f>;
+ };
+
+ /* USB-C OTG (TCPC USB PD PHY) */
+ tcpc@52 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x52>;
+ interrupt-parent = <&som_gpio_expander_1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ op-sink-microwatt = <0>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec_con_hs: endpoint {
+ remote-endpoint = <&usb1_con_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ typec_con_ss: endpoint {
+ remote-endpoint = <&usb1_con_ss>;
+ };
+ };
+ };
+ };
+ };
+
+ carrier_eeprom: eeprom@57 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+/* Aquila I2C_2 */
+&i3c2 {
+ status = "okay";
+};
+
+/* Aquila I2C_4_CSI1 */
+&lpi2c4 {
+ status = "okay";
+};
+
+/* Aquila I2C_6 */
+&lpi2c5 {
+ status = "okay";
+};
+
+/* Aquila I2C_3_DSI1/I2C_5_CSI2 */
+&lpi2c8 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9543";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* I2C on DSI Connector Pin #4 and #6 */
+ i2c_dsi_0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* I2C on DSI Connector Pin #52 and #54 */
+ i2c_dsi_1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+/* Aquila SPI_1 */
+&lpspi6 {
+ status = "okay";
+};
+
+/* Aquila UART_3, used as the Linux Console */
+&lpuart1 {
+ status = "okay";
+};
+
+/* Aquila UART_4 */
+&lpuart2 {
+ status = "okay";
+};
+
+/* Aquila UART_1 */
+&lpuart3 {
+ status = "okay";
+};
+
+/* Aquila UART_2 as RS485 */
+&lpuart7 {
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ rs485-rx-during-tx;
+
+ status = "okay";
+};
+
+/* Aquila PCIE_1 */
+&pcie0 {
+ status = "okay";
+};
+
+/* Aquila I2S_1 */
+&sai2 {
+ status = "okay";
+};
+
+/* Aquila PWM_1 */
+&tpm3 {
+ status = "okay";
+};
+
+/* Aquila PWM_2 */
+&tpm6 {
+ status = "okay";
+};
+
+/* Aquila PWM_3_DSI and PWM_4_DP */
+&tpm5 {
+ status = "okay";
+};
+
+/* Aquila USB_2, optional Bluetooth USB */
+&usb2 {
+ status = "okay";
+};
+
+/* Aquila USB_1 */
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ status = "okay";
+
+ port {
+ usb1_con_hs: endpoint {
+ remote-endpoint = <&typec_con_hs>;
+ };
+ };
+};
+
+&usb3_phy {
+ orientation-switch;
+
+ status = "okay";
+
+ port {
+ usb1_con_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+};
+
+/* Aquila SD_1 */
+&usdhc2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx95.dtsi"
+
+/ {
+ aliases {
+ can0 = &flexcan1;
+ can1 = &flexcan2;
+ can2 = &flexcan3;
+ can3 = &flexcan4;
+ eeprom0 = &som_eeprom;
+ ethernet0 = &enetc_port0;
+ i2c0 = &lpi2c3;
+ i2c1 = &lpi2c2;
+ i2c2 = &i3c2;
+ i2c3 = &lpi2c8;
+ i2c4 = &lpi2c4;
+ i2c6 = &lpi2c5;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &rtc_i2c;
+ rtc1 = &scmi_bbm;
+ serial0 = &lpuart3;
+ serial1 = &lpuart7;
+ serial2 = &lpuart1;
+ serial3 = &lpuart2;
+ usb0 = &usb3;
+ usb1 = &usb2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ aquila_key_wake: gpio-key-wakeup {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;
+
+ status = "disabled";
+
+ key-wakeup {
+ /* Aquila CTRL_WAKE1_MICO# */
+ gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ label = "Wake Up";
+ wakeup-source;
+ linux,code = <KEY_WAKEUP>;
+ };
+ };
+
+ clk_dsi2dp_refclk: clock-dsi2dp-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ clk_dsi2dp_refclk_en: clock-dsi2dp-refclk-en {
+ compatible = "gpio-gate-clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_dp_clk_en>;
+ clocks = <&clk_dsi2dp_refclk>;
+ #clock-cells = <0>;
+ /* CTRL_DP_CLK_EN */
+ enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ clk_serdes_eth_ref: clock-serdes-eth-ref {
+ compatible = "gpio-gate-clock";
+ #clock-cells = <0>;
+ /* CTRL_ETH_REF_CLK_STBY */
+ enable-gpios = <&som_gpio_expander_0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "On-module +V1.8";
+ };
+
+ reg_dp_1p2v: regulator-dp-1p2v {
+ compatible = "regulator-fixed";
+ /* CTRL_DP_BRIDGE_EN */
+ gpios = <&som_gpio_expander_0 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-name = "On-module +V1.2_DP";
+ vin-supply = <®_1p8v>;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ /* Aquila USB_1_EN */
+ gpios = <&som_gpio_expander_0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "USB_1_EN";
+ };
+
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ /* Aquila USB_2_EN */
+ gpios = <&som_gpio_expander_0 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "USB_2_H_EN";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_pwr_en>;
+ /* Aquila SD_1_PWR_EN */
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <100000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "SD_1_PWR_EN";
+ startup-delay-us = <20000>;
+ };
+
+ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+ compatible = "regulator-gpio";
+ /* PMIC_SD_1_VSEL */
+ gpios = <&som_gpio_expander_1 9 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "PMIC_SD_1_VSEL";
+ states = <1800000 0x1>,
+ <3300000 0x0>;
+ };
+
+ remoteproc-cm7 {
+ compatible = "fsl,imx95-cm7";
+ mboxes = <&mu7 0 1 &mu7 1 1 &mu7 3 1>;
+ mbox-names = "tx", "rx", "rxdb";
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>, <&m7_reserved>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux_cma: linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0 0x3c000000>;
+ alloc-ranges = <0 0x80000000 0 0x7f000000>;
+ linux,cma-default;
+ };
+
+ m7_reserved: memory@80000000 {
+ reg = <0 0x80000000 0 0x1000000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@88220000 {
+ reg = <0 0x88220000 0 0x1000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@88000000 {
+ reg = <0 0x88000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@88008000 {
+ reg = <0 0x88008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@88010000 {
+ reg = <0 0x88010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@88018000 {
+ reg = <0 0x88018000 0 0x8000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@88020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x88020000 0 0x100000>;
+ no-map;
+ };
+ };
+};
+
+/* Aquila ADC_[1-4] */
+&adc1 {
+ vref-supply = <®_1p8v>;
+};
+
+/* Aquila ETH_1 */
+&enetc_port0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enetc0>;
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+};
+
+/* Aquila CAN_1 */
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* Aquila CAN_2 */
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* Aquila CAN_3 */
+&flexcan3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan3>;
+};
+
+/* Aquila CAN_4 */
+&flexcan4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan4>;
+};
+
+/* Aquila QSPI_1 */
+&flexspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi1_8bit>,
+ <&pinctrl_qspi_cs1>;
+};
+
+&gpio1 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AQUILA_C24", /* 10 */
+ "",
+ "AQUILA_B17",
+ "CTRL_GPIO_EXP_INT#",
+ "AQUILA_B18";
+
+ status = "okay";
+};
+
+&gpio2 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AQUILA_B42",
+ "",
+ "AQUILA_B43";
+};
+
+&gpio3 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AQUILA_A11",
+ "", /* 20 */
+ "AQUILA_B57",
+ "AQUILA_B19";
+};
+
+&gpio4 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AQUILA_C22",
+ "AQUILA_C21",
+ "AQUILA_C20",
+ "", /* 20 */
+ "",
+ "",
+ "AQUILA_C23",
+ "AQUILA_D23",
+ "AQUILA_D24",
+ "",
+ "AQUILA_D25";
+};
+
+&gpio5 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "AQUILA_B44",
+ "AQUILA_B45";
+};
+
+/* Aquila I2C_2 */
+&i3c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i3c2>;
+ i2c-scl-hz = <100000>;
+};
+
+/* Aquila I2C_1 */
+&lpi2c2 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-1 = <&pinctrl_lpi2c2_gpio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* On-module I2C - I2C_SOM */
+&lpi2c3 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c3>, <&pinctrl_ctrl_gpio_exp_int>;
+ pinctrl-1 = <&pinctrl_lpi2c3_gpio>, <&pinctrl_ctrl_gpio_exp_int>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ status = "okay";
+
+ som_gpio_expander_0: gpio@20 {
+ compatible = "nxp,pcal6408";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "AQUILA_C38", /* 0 */
+ "PCIE_2_RESET#",
+ "AQUILA_B77",
+ "USB_2_H_EN",
+ "BT_DISABLE#",
+ "WIFI_DISABLE#",
+ "CTRL_ETH_REF_CLK_STBY",
+ "CTRL_DP_BRIDGE_EN";
+ };
+
+ som_gpio_expander_1: gpio@21 {
+ compatible = "nxp,pcal6416";
+ reg = <0x21>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "AQUILA_C1", /* 0 */
+ "AQUILA_C2",
+ "AQUILA_C3",
+ "AQUILA_C4",
+ "AQUILA_C36",
+ "AQUILA_B74",
+ "AQUILA_B75",
+ "USB_2_H_OC#",
+ "AQUILA_B81",
+ "PMIC_SD_1_VSEL",
+ "ETH_1_INT#", /* 10 */
+ "CTRL_TPM_INT#",
+ "SPI_2_CS2_TPM",
+ "PCIE_WAKE_WIFI#",
+ "WIFI_WAKE_BT",
+ "WIFI_WAKEUP_HOST";
+ };
+
+ som_dsi2dp_bridge: bridge@2c {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+ clocks = <&clk_dsi2dp_refclk_en>;
+ clock-names = "refclk";
+ vcc-supply = <®_dp_1p2v>;
+ vcca-supply = <®_dp_1p2v>;
+ vccio-supply = <®_1p8v>;
+ vpll-supply = <®_1p8v>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi2dp_in: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi2dp_out: endpoint {
+ data-lanes = <3 2 1 0>;
+ };
+ };
+ };
+ };
+
+ rtc_i2c: rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp1075";
+ reg = <0x48>;
+ };
+
+ som_eeprom: eeprom@50 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+/* Aquila I2C_4_CSI1 */
+&lpi2c4 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ pinctrl-1 = <&pinctrl_lpi2c4_gpio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Aquila I2C_6 */
+&lpi2c5 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c5>;
+ pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Aquila I2C_3_DSI1/I2C_5_CSI2 */
+&lpi2c8 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_lpi2c8>;
+ pinctrl-1 = <&pinctrl_lpi2c8_gpio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Aquila SPI_2 */
+&lpspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi4>;
+ cs-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>,
+ <&som_gpio_expander_1 12 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+
+ som_tpm: tpm@1 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ interrupt-parent = <&som_gpio_expander_1>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ /*
+ * Maximum TPM-supported speed is 18.5 MHz, limited to 12 MHz
+ * here as lpspi4's per-clock (2x the max speed) is 24 MHz.
+ */
+ spi-max-frequency = <12000000>;
+ };
+};
+
+/* Aquila SPI_1 */
+&lpspi6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi6>;
+ cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+};
+
+/* Aquila UART_3, used as the Linux Console */
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+/* Aquila UART_4 */
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+/* Aquila UART_1 */
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+};
+
+/* Aquila UART_2 */
+&lpuart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ uart-has-rtscts;
+};
+
+&mu7 {
+ status = "okay";
+};
+
+/* Aquila ETH_2_XGMII_MDIO, shared between all ethernet ports */
+&netc_emdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emdio>;
+
+ status = "okay";
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&som_gpio_expander_1>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+};
+
+&netcmix_blk_ctrl {
+ status = "okay";
+};
+
+&netc_blk_ctrl {
+ status = "okay";
+};
+
+&netc_timer {
+ status = "okay";
+};
+
+/* Aquila PCIE_1 */
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpios = <&som_gpio_expander_0 0 GPIO_ACTIVE_LOW>;
+};
+
+/* On-module Wi-Fi or Aquila PCIE_2 */
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1>;
+ reset-gpios = <&som_gpio_expander_0 1 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+/* Aquila I2S_1 */
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI2>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ #sound-dai-cells = <0>;
+ fsl,sai-mclk-direction-output;
+};
+
+&scmi_bbm {
+ linux,code = <KEY_POWER>;
+};
+
+&thermal_zones {
+ /* PF09 Main PMIC */
+ pf09-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 2>;
+
+ trips {
+ trip0 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* PF53 VDD_ARM PMIC */
+ pf53-arm-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 4>;
+
+ trips {
+ trip0 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* PF53 VDD_SOC PMIC */
+ pf53-soc-thermal {
+ polling-delay = <2000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&scmi_sensor 3>;
+
+ trips {
+ trip0 {
+ hysteresis = <2000>;
+ temperature = <155000>;
+ type = "critical";
+ };
+ };
+ };
+};
+
+/* Aquila PWM_1 */
+&tpm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+/* Aquila PWM_2 */
+&tpm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+/* Aquila PWM_3_DSI and PWM_4_DP */
+&tpm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3_dsi>, <&pinctrl_pwm4_dp>;
+};
+
+/* Aquila USB_2, optional Bluetooth USB */
+&usb2 {
+ dr_mode = "host";
+ vbus-supply = <®_usb2_vbus>;
+};
+
+/* Aquila USB_1 */
+&usb3 {
+ fsl,disable-port-power-control;
+};
+
+&usb3_dwc3 {
+ dr_mode = "otg";
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+};
+
+&usb3_phy {
+ vbus-supply = <®_usb1_vbus>;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+
+ status = "okay";
+};
+
+/* Aquila SD_1 */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_sd1_cd_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_sd1_cd_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<&pinctrl_sd1_cd_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_sd1_cd_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <®_usdhc2_vqmmc>;
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+
+ status = "okay";
+};
+
+&scmi_iomuxc {
+ /* Aquila CTRL_WAKE1_MICO# */
+ pinctrl_ctrl_wake1_mico: ctrlwake1micogrp {
+ fsl,pins = <IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x31e>; /* Aquila D6 */
+ };
+
+ pinctrl_ctrl_dp_clk_en: dpclkengrp {
+ fsl,pins = <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x11e>; /* CTRL_DP_CLK_EN */
+ };
+
+ /* Aquila ETH_2_XGMII_MDIO */
+ pinctrl_emdio: emdiogrp {
+ fsl,pins = <IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x57e>, /* Aquila B90 */
+ <IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e>; /* Aquila B89 */
+ };
+
+ /* Aquila ETH_1 */
+ pinctrl_enetc0: enetc0grp {
+ fsl,pins = <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e>, /* ENET1_TX_CTL */
+ <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e>, /* ENET1_TXC */
+ <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e>, /* ENET1_TDO */
+ <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e>, /* ENET1_TD1 */
+ <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e>, /* ENET1_TD2 */
+ <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e>, /* ENET1_TD3 */
+ <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e>, /* ENET1_RX_CTL */
+ <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e>, /* ENET1_RXC */
+ <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e>, /* ENET1_RD0 */
+ <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e>, /* ENET1_RD1 */
+ <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e>, /* ENET1_RD2 */
+ <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e>; /* ENET1_RD3 */
+ };
+
+ /* Aquila CAN_1 */
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x39e>, /* Aquila B48 */
+ <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x39e>; /* Aquila B49 */
+ };
+
+ /* Aquila CAN_2 */
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e>, /* Aquila B50 */
+ <IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e>; /* Aquila B51 */
+ };
+
+ /* Aquila CAN_3 */
+ pinctrl_flexcan3: flexcan3grp {
+ fsl,pins = <IMX95_PAD_CCM_CLKO3__CAN3_TX 0x39e>, /* Aquila B53 */
+ <IMX95_PAD_CCM_CLKO4__CAN3_RX 0x39e>; /* Aquila B54 */
+ };
+
+ /* Aquila CAN_4 */
+ pinctrl_flexcan4: flexcan4grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO04__CAN4_TX 0x39e>, /* Aquila B55 */
+ <IMX95_PAD_GPIO_IO05__CAN4_RX 0x39e>; /* Aquila B56 */
+ };
+
+ /* Aquila QSPI_1 (4 bit) */
+ pinctrl_flexspi1_4bit: flexspi14bitgrp {
+ fsl,pins = <IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe>, /* Aquila B65 */
+ <IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe>, /* Aquila B68 */
+ <IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe>, /* Aquila B67 */
+ <IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe>, /* Aquila B61 */
+ <IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe>, /* Aquila B60 */
+ <IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe>; /* Aquila B63 */
+ };
+
+ /* Aquila QSPI_1 (8 bit) */
+ pinctrl_flexspi1_8bit: flexspi18bitgrp {
+ fsl,pins = <IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe>, /* Aquila B65 */
+ <IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe>, /* Aquila B68 */
+ <IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe>, /* Aquila B67 */
+ <IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe>, /* Aquila B61 */
+ <IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe>, /* Aquila B60 */
+ <IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x3fe>, /* Aquila B70 */
+ <IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x3fe>, /* Aquila B71 */
+ <IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x3fe>, /* Aquila B72 */
+ <IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x3fe>, /* Aquila B73 */
+ <IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe>; /* Aquila B63 */
+ };
+
+ /* Aquila GPIO_01 */
+ pinctrl_gpio_1: gpio1grp {
+ fsl,pins = <IMX95_PAD_ENET2_RD0__GPIO4_IO_BIT24 0x31e>; /* Aquila D23 */
+ };
+
+ /* Aquila GPIO_02 */
+ pinctrl_gpio_2: gpio2grp {
+ fsl,pins = <IMX95_PAD_ENET2_RD1__GPIO4_IO_BIT25 0x31e>; /* Aquila D24 */
+ };
+
+ /* Aquila GPIO_03 */
+ pinctrl_gpio_3: gpio3grp {
+ fsl,pins = <IMX95_PAD_ENET2_RD3__GPIO4_IO_BIT27 0x31e>; /* Aquila D25 */
+ };
+
+ /* Aquila GPIO_04 */
+ pinctrl_gpio_4: gpio4grp {
+ fsl,pins = <IMX95_PAD_ENET2_TD0__GPIO4_IO_BIT19 0x31e>; /* Aquila C20 */
+ };
+
+ /* Aquila GPIO_05 */
+ pinctrl_gpio_5: gpio5grp {
+ fsl,pins = <IMX95_PAD_ENET2_TD1__GPIO4_IO_BIT18 0x31e>; /* Aquila C21 */
+ };
+
+ /* Aquila GPIO_06 */
+ pinctrl_gpio_6: gpio6grp {
+ fsl,pins = <IMX95_PAD_ENET2_TD2__GPIO4_IO_BIT17 0x31e>; /* Aquila C22 */
+ };
+
+ /* Aquila GPIO_07 */
+ pinctrl_gpio_7: gpio7grp {
+ fsl,pins = <IMX95_PAD_ENET2_RXC__GPIO4_IO_BIT23 0x31e>; /* Aquila C23 */
+ };
+
+ /* Aquila GPIO_08 */
+ pinctrl_gpio_8: gpio8grp {
+ fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10 0x31e>; /* Aquila C24 */
+ };
+
+ /* Aquila GPIO_09_CSI_1 */
+ pinctrl_gpio_9_csi_1: gpio9csi1grp {
+ fsl,pins = <IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12 0x31e>; /* Aquila B17 */
+ };
+
+ /* Aquila GPIO_10_CSI_1 */
+ pinctrl_gpio_10_csi_1: gpio10csi1grp {
+ fsl,pins = <IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x31e>; /* Aquila B18 */
+ };
+
+ /* Aquila GPIO_11_CSI_1 */
+ pinctrl_gpio_11_csi_1: gpio11csi1grp {
+ fsl,pins = <IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19 0x31e>; /* Aquila A11*/
+ };
+
+ /* Aquila GPIO_12_CSI_1 */
+ pinctrl_gpio_12_csi_1: gpio12csi1grp {
+ fsl,pins = <IMX95_PAD_SD3_DATA0__GPIO3_IO_BIT22 0x31e>; /* Aquila B19 */
+ };
+
+ /* Aquila GPIO_17_DSI_1 */
+ pinctrl_gpio_17_dsi_1: gpio17dsi1grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7 0x31e>; /* Aquila B42 */
+ };
+
+ /* Aquila GPIO_18_DSI_1 */
+ pinctrl_gpio_18_dsi_1: gpio18dsi1grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9 0x31e>; /* Aquila B43 */
+ };
+
+ /* Aquila GPIO_19_DSI_1 */
+ pinctrl_gpio_19_dsi_1: gpio19dsi1grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x31e>; /* Aquila B44 */
+ };
+
+ /* Aquila GPIO_20_DSI_1 */
+ pinctrl_gpio_20_dsi_1: gpio20dsi1grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e>; /* Aquila B45 */
+ };
+
+ /* Aquila GPIO_21_DP */
+ pinctrl_gpio_21_dp: gpio21dpgrp {
+ fsl,pins = <IMX95_PAD_SD3_CMD__GPIO3_IO_BIT21 0x31e>; /* Aquila B57 */
+ };
+
+ pinctrl_ctrl_gpio_exp_int: gpioexpintgrp {
+ fsl,pins = <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13 0x31e>; /* CTRL_GPIO_EXP_INT# */
+ };
+
+ /* Aquila I2C_2 */
+ pinctrl_i3c2: i3c2cgrp {
+ fsl,pins = <IMX95_PAD_ENET1_MDC__I3C2_SCL 0x40001186>, /* Aquila C17 */
+ <IMX95_PAD_ENET1_MDIO__I3C2_SDA 0x40001186>; /* Aquila C16 */
+ };
+
+ /* Aquila I2C_1 as GPIOs */
+ pinctrl_lpi2c2_gpio: lpi2c2gpiogrp {
+ fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2 0x40001b9e>, /* Aquila D8 */
+ <IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3 0x40001b9e>; /* Aquila D7 */
+ };
+
+ /* Aquila I2C_1 */
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40001b9e>, /* Aquila D8 */
+ <IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40001b9e>; /* Aquila D7 */
+ };
+
+ /* On-module I2C as GPIOs */
+ pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x40001b9e>, /* I2C_SOM_SDA */
+ <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x40001b9e>; /* I2C_SOM_SCL */
+ };
+
+ /* On-module I2C */
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40001b9e>, /* I2C_SOM_SDA */
+ <IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40001b9e>; /* I2C_SOM_SCL */
+ };
+
+ /* Aquila I2C_4_CSI1 as GPIO */
+ pinctrl_lpi2c4_gpio: lpi2c4gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30 0x40001b9e>, /* Aquila A12 */
+ <IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31 0x40001b9e>; /* Aquila A13 */
+ };
+
+ /* Aquila I2C_4_CSI1 */
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40001b9e>, /* Aquila A12 */
+ <IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40001b9e>; /* Aquila A13 */
+ };
+
+ /* Aquila I2C_6 as GPIO */
+ pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22 0x40001b9e>, /* Aquila C18 */
+ <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23 0x40001b9e>; /* Aquila C19 */
+ };
+
+ /* Aquila I2C_6 */
+ pinctrl_lpi2c5: lpi2c5grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40001b9e>, /* Aquila C18 */
+ <IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40001b9e>; /* Aquila C19 */
+ };
+
+ /* Aquila I2C_3_DSI1/I2C_5_CSI2 as GPIO */
+ pinctrl_lpi2c8_gpio: lpi2c8gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO12__GPIO2_IO_BIT12 0x40001b9e>, /* Aquila C5/B40 */
+ <IMX95_PAD_GPIO_IO13__GPIO2_IO_BIT13 0x40001b9e>; /* Aquila C6/B41 */
+ };
+
+ /* Aquila I2C_3_DSI1/I2C_5_CSI2 */
+ pinctrl_lpi2c8: lpi2c8grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO12__LPI2C8_SDA 0x40001b9e>, /* Aquila C5/B40 */
+ <IMX95_PAD_GPIO_IO13__LPI2C8_SCL 0x40001b9e>; /* Aquila C6/B41 */
+ };
+
+ /* Aquila SPI_2 */
+ pinctrl_lpspi4: lpspi4grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x3fe>, /* Aquila D16 */
+ <IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x3fe>, /* Aquila D15 */
+ <IMX95_PAD_GPIO_IO20__LPSPI4_SOUT 0x3fe>, /* Aquila D17 */
+ <IMX95_PAD_GPIO_IO21__LPSPI4_SCK 0x3fe>; /* Aquila D14 */
+ };
+
+ /* Aquila SPI_1 */
+ pinctrl_lpspi6: lpspi6grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0 0x3fe>, /* Aquila D9 */
+ <IMX95_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe>, /* Aquila D10 */
+ <IMX95_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe>, /* Aquila D11 */
+ <IMX95_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe>; /* Aquila D12 */
+ };
+
+ /* Aquila PCIE_1 */
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x40001b1e>; /* Aquila C37 */
+ };
+
+ /* Aquila PCIE_2 */
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x40001b1e>; /* Aquila C34 */
+ };
+
+ /* Aquila QSPI_1_CS1# */
+ pinctrl_qspi_cs1: qspics1grp {
+ fsl,pins = <IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe>; /* Aquila B66 */
+ };
+
+ /* Aquila QSPI_1_CS2# as GPIO */
+ pinctrl_qspi_cs2_gpio: qspics2gpiogrp {
+ fsl,pins = <IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27 0x3fe>; /* Aquila B62 */
+ };
+
+ /* Aquila I2S_1 */
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x11e>, /* Aquila B21 */
+ <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x11e>, /* Aquila B20 */
+ <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x11e>, /* Aquila B23 */
+ <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x11e>; /* Aquila B22 */
+ };
+
+ pinctrl_sai2_mclk: sai2mclkgrp {
+ fsl,pins = <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e>; /* Aquila B24 */
+ };
+
+ /* Aquila SD_1_CD# as GPIO */
+ pinctrl_sd1_cd_gpio: sd1cdgpiogrp {
+ fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x1100>; /* Aquila A1 */
+ };
+
+ /* Aquila SD_1_PWR_EN */
+ pinctrl_sd1_pwr_en: sd1pwrengpiogrp {
+ fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x11e>; /* Aquila A6 */
+ };
+
+ /* Aquila PWM_1 */
+ pinctrl_pwm1: tpm3ch3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO24__TPM3_CH3 0x11e>; /* Aquila C25 */
+ };
+
+ /* Aquila PWM_3_DSI as GPIO */
+ pinctrl_pwm3_dsi_gpio: tpm5ch0gpiogrp {
+ fsl,pins = <IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6 0x11e>; /* Aquila B46 */
+ };
+
+ /* Aquila PWM_3_DSI */
+ pinctrl_pwm3_dsi: tpm5ch0grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0 0x11e>; /* Aquila B46 */
+ };
+
+ /* Aquila PWM_4_DP */
+ pinctrl_pwm4_dp: tpm5ch3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO26__TPM5_CH3 0x11e>; /* Aquila B58 */
+ };
+
+ /* Aquila PWM_2 */
+ pinctrl_pwm2: tpm6ch0grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO08__TPM6_CH0 0x11e>; /* Aquila C26 */
+ };
+
+ /* Aquila UART_3 */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e>, /* Aquila D20 */
+ <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e>; /* Aquila D19 */
+ };
+
+ /* Aquila UART_4 */
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e>, /* Aquila D22 */
+ <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x31e>; /* Aquila D21 */
+ };
+
+ /* Aquila UART_1 */
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO14__LPUART3_TX 0x31e>, /* Aquila B37 */
+ <IMX95_PAD_GPIO_IO15__LPUART3_RX 0x31e>, /* Aquila B35 */
+ <IMX95_PAD_GPIO_IO16__LPUART3_CTS_B 0x31e>, /* Aquila B36 */
+ <IMX95_PAD_GPIO_IO17__LPUART3_RTS_B 0x31e>; /* Aquila B38 */
+ };
+
+ /* Aquila UART_2 */
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <IMX95_PAD_GPIO_IO36__LPUART7_TX 0x31e>, /* Aquila B33 */
+ <IMX95_PAD_GPIO_IO37__LPUART7_RX 0x31e>, /* Aquila B31 */
+ <IMX95_PAD_GPIO_IO10__LPUART7_CTS_B 0x31e>, /* Aquila B32 */
+ <IMX95_PAD_GPIO_IO11__LPUART7_RTS_B 0x31e>; /* Aquila B34 */
+ };
+
+ /* On-module eMMC */
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e>, /* eMMC_CLK */
+ <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e>, /* eMMC_CMD */
+ <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e>, /* eMMC_DATA0 */
+ <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e>, /* eMMC_DATA1 */
+ <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e>, /* eMMC_DATA2 */
+ <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e>, /* eMMC_DATA3 */
+ <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e>, /* eMMC_DATA4 */
+ <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e>, /* eMMC_DATA5 */
+ <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e>, /* eMMC_DATA6 */
+ <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e>, /* eMMC_DATA7 */
+ <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e>; /* eMMC_STROBE */
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe>, /* eMMC_CLK */
+ <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe>, /* eMMC_CMD */
+ <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe>, /* eMMC_DATA0 */
+ <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe>, /* eMMC_DATA1 */
+ <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe>, /* eMMC_DATA2 */
+ <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe>, /* eMMC_DATA3 */
+ <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe>, /* eMMC_DATA4 */
+ <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe>, /* eMMC_DATA5 */
+ <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe>, /* eMMC_DATA6 */
+ <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe>, /* eMMC_DATA7 */
+ <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe>; /* eMMC_STROBE */
+ };
+
+ /* Aquila SD_1 */
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e>, /* Aquila A5 */
+ <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e>, /* Aquila A7 */
+ <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e>, /* Aquila A3 */
+ <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e>, /* Aquila A2 */
+ <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e>, /* Aquila A10 */
+ <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e>; /* Aquila A8 */
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe>, /* Aquila A5 */
+ <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe>, /* Aquila A7 */
+ <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe>, /* Aquila A3 */
+ <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe>, /* Aquila A2 */
+ <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe>, /* Aquila A10 */
+ <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe>; /* Aquila A8 */
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+ fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x400>, /* Aquila A5 */
+ <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x400>, /* Aquila A7 */
+ <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x400>, /* Aquila A3 */
+ <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x400>, /* Aquila A2 */
+ <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x400>, /* Aquila A10 */
+ <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x400>; /* Aquila A8 */
+ };
+};
projects / thirdparty / linux.git / commitdiff
