feat(kernel-modules): add Qualcomm IPC router to enable USB

The x13s, and possibly other Qualcomm based devices need the QC
IPC router driver in order to enable USB. Without it, its not
possible to boot from USB-C attached disks.

IPC in this case is Inter _Processor_ Communication and forms
the message bus used to communicate between differing processing
elements in a given system/SoC running and managing various
hardware devices. This means that while it appears this driver
should be in the dracut network modules that is incorrect
because its not for enabling host networking in the initrd,
but rather for communicating with other hardware blocks.

Those other blocks aren't limited to modems, but any SMD (shared
memory device), which on QC based machines includes the audio DSPs,
RPM (resource power manager) and of course the application
processor cores linux is running on.

References:
https://osmocom.org/projects/quectel-modems/wiki/Qualcomm_Linux_SMD
https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/Documentation/arm/msm/msm_ipc_router.txt
https://github.com/dracutdevs/dracut/pull/2531

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>

diff --git a/modules.d/90kernel-modules/module-setup.sh b/modules.d/90kernel-modules/module-setup.sh
index cb67551c0721bb1d25e96819c34a569b010d27c9..44cdfb036d1715f99a9f1143643f9cd54e639629 100755 (executable)
--- a/modules.d/90kernel-modules/module-setup.sh
+++ b/modules.d/90kernel-modules/module-setup.sh
@@ -95,7 +95,8 @@ installkernel() {
                 "=drivers/usb/misc" \
                 "=drivers/usb/musb" \
                 "=drivers/usb/phy" \
-                "=drivers/scsi/hisi_sas"
+                "=drivers/scsi/hisi_sas" \
+                "=net/qrtr"
         fi
 
         awk -F: '/^\// {print $1}' "$srcmods/modules.dep" 2> /dev/null | instmods