arm64: dts: rockchip: Add Bluetooth support for Khadas Edge 2L

Enable Bluetooth support for the Ampak AP6275P module on the
Khadas Edge 2L. This involves enabling the UART5 interface for
HCI communication and defining the required regulators and
power-sequence pins.

Signed-off-by: Gray Huang <gray.huang@wesion.com>
Link: https://patch.msgid.link/20260507033541.2576335-3-gray.huang@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
index 967a95ce01ded76eab671f74408ec364ec116863..3121a0ba7c7c195ca406f3a25340767de8c8d856 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-khadas-edge-2l.dts
@@ -552,6 +552,20 @@
 };
 
 &pinctrl {
+       bluetooth {
+               bt_reg_on: bt-reg-on {
+                       rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               bt_wake_host: bt-wake-host {
+                       rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+
+               host_wake_bt: host-wake-bt {
+                       rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
        pcie0 {
                pcie0_rst: pcie0-rst {
                        rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -598,6 +612,27 @@
        status = "okay";
 };
 
+&uart5 {
+       pinctrl-0 = <&uart5m1_xfer &uart5m1_ctsn &uart5m1_rtsn>;
+       pinctrl-names = "default";
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               clocks = <&hym8563>;
+               clock-names = "lpo";
+               device-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+               pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+               pinctrl-names = "default";
+               shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+               vbat-supply = <&vcc_3v3_s3>;
+               vddio-supply = <&vcc_1v8_s3>;
+       };
+};
+
 &usb_drd1_dwc3 {
        dr_mode = "host";
        status = "okay";