+++ /dev/null
-<HTML>
-<HEAD>
-<TITLE>K56flex Modems</TITLE>
-
-<BASEFONT SIZE=4>
-<B><FONT SIZE=+3>K56</FONT>flex <FONT SIZE=+2>M</FONT>ODEMS</B>
-<BASEFONT SIZE=3>
-
-<P>
-<IMG SRC="../icons/new.gif" alt="new"> October, 1997
-<P>
-<HR WIDTH=65% ALIGN=right>
-<B><A NAME="Intro"><FONT SIZE=+2>I</FONT>NTRODUCTION</B>
-<P>
-<img src="../icons/update.gif" height=10 width=29> <font size=-1>October 1997</font><br>
-There are rivals in the new 56K modem technology ~ US Robotics was the
-first company to introduce a modem with the <i>x2</i> standard.
-Rockwell and Lucent came up with a chip set using a version called
-<i>K56flex</i>.
-<P>
-The <b>ITU</b> (International Telecommunications Union) has still to
-decide which will become the offical standard, with both a <i>determining</i>
-standard and a <i>final</i> standard to be settled.
-<P>
-<HR WIDTH=65% ALIGN=right>
-<B><A NAME="Update"><FONT SIZE=+2>N</FONT>OTES</B>
-<ul>
- <li>The <b>Multitech</b> K56flex modem ( rom level reports as
- <TT>'V1.01-K56-DLS'</TT>) runs okay in Class 1 but cannot
- cope with adaptive answer.
- <li>Similar problems to the earlier V34bis are reported for the new
- <b>USR Sportster 56K/x2</b>. Illegal characters where <TT>CR-LF</TT>
- pairs should be are causing <i>Unspecified Transmit Phase B</i>
- errors. The best suggestion at the moment is to run this modem in
- Class 1.
-</ul>
-<P>
-<a href=index.html><img src="../icons/contents.gif"
-height="38" width="30" alt="Back to Modem Index "></a>
-<a href="att-dataport.html"><img src="../icons/next.gif"
-height="38" width="30"> AT&T Paradyne DataPort</A>
-
-<HR>
- <a href="../acknowledge.html#Revision">Revision</a> <i>Last updated $Date$.</i>
-<HR>
-</BODY>
-</HTML>
<IMG SRC="../icons/new.gif" alt="new"> October, 1997
<P>
-<!--<DL COMPACT>
-<DT><IMG SRC="../icons/smiley.gif" ALT="o">
-<DD>This modem is recommended for use with HylaFAX.
-</DL> -->
-
<HR WIDTH=65% ALIGN=right>
<B><A NAME="Class2"><FONT SIZE=+2>C</FONT>LASS 2 <FONT SIZE=+1>S</FONT>UPPORT</A></B>
<P>
-<a href=index.html><img src="../icons/contents.gif"
-height="38" width="30" alt=" Back to Modem Index "></a>
-<a href="multitech-1432.html"><img src="../icons/next.gif"
-height="38" width="30"> Multitech 1432BA</A>
+<a href=index.html><img src="../icons/contents.gif" alt=" Back to Modem Index "></a>
+<a href="multitech-1432.html"><img src="../icons/next.gif"> Multitech 1432BA</A>
<HR>
- <a href="../acknowledge.html#Revision">Revision</a> <i>Last updated $Date$.</i>
+ <a href="mailto:webmaster@hylafax.org">webmaster@hylafax.org</a> <i>Last updated $Date$.</i>
<HR>
</BODY>
</HTML>
<BODY>
<BASEFONT SIZE=4>
-<B><FONT SIZE=+3>M</FONT>ODEM <FONT SIZE=+2>B</FONT>UGS AND <FONT SIZE=+2>G</FONT>OTCHAS</B>
+<B><FONT SIZE="+3">M</FONT>ODEM <FONT SIZE="+2">B</FONT>UGS AND <FONT SIZE="+2">G</FONT>OTCHAS</B>
<BASEFONT SIZE=3>
<HR SIZE=4>
This document contains information about modem bugs and gotchas that have
been gleaned from experiences making the FlexFAX/HylaFAX code work with the
-modems. These problems are based either on my direct experiences or on
+modems. These problems are based either on Sam's direct experiences or on
the experiences of others that have worked with the software. Every
attempt has been made to verify that these problems exist and are
reproducible.
-I also make an effort to follow through with vendors when I encounter
-problems.
<P>
<EM>One should always check the version of the modem firmware</EM>.
-Note also that if a
-modem is not listed here then <STRONG>I have not tried it</STRONG>
-and/or noone has supplied a reliable report on the modem.
<P>
The modems should be sorted alphabetically.
<UL>
<LI><A HREF="att-dataport.html">AT&T Paradyne DataPort</A>
-<IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="(Recommended)">
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
+<LI><A HREF="supra-v32bis.html">Diamond SupraFAX v.32bis</A>
+<LI><A HREF="rockwell-56k.html">Diamond Supra Express 56</A>
<LI><A HREF="digicom-scout.html">Digicom Scout+</A>
<LI><A HREF="everex-2496d.html">Everex EverFax 24/96D</A>
<LI><A HREF="hayes-optima2400.html">Hayes Optima 2400+Fax96</A>
+<LI><A HREF="hayes-accura288.html">Hayes Accura 288</A>
<LI><A HREF="multitech-1432.html">Multi-Tech MT1432BA</A>
-<IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="(Recommended)">
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
<LI><A HREF="multitech-1932.html">Multi-Tech MT1932ZDX</A>
-<IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="(Recommended)">
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
+<LI><A HREF="multitech-2834.html">Multi-Tech MT2834ZDX</A>
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
+<LI><A HREF="rockwell-56k.html">Multi-Tech MT5600ZDX</A>
<LI><A HREF="nuvo-96424pfx.html">Nuvo Voyager 96424PFX</A>
<LI><A HREF="ppi-pm14400fxmt.html">Practical Peripherals PM14400FXMT</A>
-<LI><A HREF="supra-v32bis.html">Supra SupraFAX v.32bis</A>
<LI><A HREF="telebit-t3000.html">Telebit T3000/WorldBlazer</A>
<LI><A HREF="twincom-144df.html">Twincom 144/DF</A>
<LI><A HREF="ucom-traveller96.html">Ucom A/S Traveller 96</A>
-<LI><A HREF="usr-courier.html">USRobotics Courier</A>
-<LI><A HREF="usr-sportster.html">USRobotics Sportster</A>
-<LI><A HREF="zyxel-1496.html">Zero One Networking ZyXEL U-1496</A>
-<IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="(Recommended)">
+<LI><A HREF="usr-courier.html">3Com (USRobotics) Courier</A>
+<LI><A HREF="usr-sportster.html">3Com (USRobotics) Sportster</A>
+<LI><A HREF="rockwell-56k.html">Zoom 56Kx, model 2949</A>
+<LI><A HREF="zyxel-1496.html">ZyXEL U-1496</A>
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
+<LI><A HREF="zyxel-elite.html">ZyXEL Elite 2864 and 2864I</A>
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
+<LI><A HREF="zyxel-omni.html">ZyXEL Omni 288S</A>
+<IMG SRC="../icons/smiley.gif" ALT="(Recommended)">
</UL>
<HR>
<ADDRESS>
-<A HREF="@HTMLPATH@/sam.html">Sam Leffler</A> / <A HREF="mailto:sam@engr.sgi.com">sam@engr.sgi.com</A>.
+<A HREF="mailto:webmaster@hylafax.org">webmaster@hylafax.org</A>.
Last updated: $Date$
</ADDRESS>
</UL>
<DL COMPACT>
-<DT><IMG SRC="@HTMLPATH@/icons/info_icon.gif" ALT="o">
+<DT><IMG SRC="../icons/info_icon.gif" ALT="o">
<DD>There are several
<A HREF="http://www.whnet.com/wolfgang/multitech.html">different models</A>,
of the MT1432, all of which function well.
Models based on the AT&T datapump have firmware revisions numbered
``01xx'', while older models based on the Rockwell datapump
have firmware revisions numbered ``03xx''.
-<DT><IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="o">
+<DT><IMG SRC="../icons/smiley.gif" ALT="o">
<DD>This modem is recommended for use with HylaFAX.
</DL>
</UL>
<P>
-<A HREF="multitech-1932.html"><IMG SRC="@HTMLPATH@/icons/next.gif">
-Multi-Tech 1932ZDX</A>
+<A HREF="multitech-1932.html"><IMG SRC="../icons/next.gif">
+ Multi-Tech 1932ZDX</A>
<HR>
<B>Model</B>: MT1932ZDX<BR>
<B>Latest Firmware Revision Tried</B>: 1.12<BR>
<B>Recommended Firmware Revisions</B>: 1.09 <I>and later</I><BR>
-<B>Last Updated</B>:$Date$<BR>
+<B>Last Updated</B>:$Date: 1998/10/12 20:47:51<BR>
<HR WIDTH=65% ALIGN=left SIZE=4>
</UL>
<DL COMPACT>
-<DT><IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="o">
+<DT><IMG SRC="../icons/smiley.gif" ALT="o">
<DD>This modem is recommended for use with HylaFAX.
</DL>
</UL>
<P>
-<A HREF="nuvo-96424pfx.html"><IMG SRC="@HTMLPATH@/icons/next.gif">
-Nuvo Voyager 96424PFX
-</A>
-
+<A HREF="index.html"><IMG SRC="../icons/contents.gif"
+HEIGHT="20" WIDTH="20" ALT=" Back to Modem Index "> Modem Index</a>
+<A HREf="multitech-2834.html"><IMG SRC="../icons/next.gif"
+HEIGHT="20" WIDTH="20" ALT=" Next Modem in List "> Multitech 2834</A>
<HR>
<ADDRESS>
-Copyright © 1990, 1991, 1992, 1993, 1994 Sam Leffler<BR>
-Copyright © 1991, 1992, 1993, 1994 Silicon Graphics, Inc.<BR>
+<A HREF="mailto:webmaster@hylafax.org">webmaster@hylafax.org</A>.
+Last updated $Date$.
</ADDRESS>
+<HR>
</BODY>
</HTML>
<HR WIDTH=65% ALIGN=left SIZE=4>
<B>Manufacturer</B>: Multi-Tech Systems<BR>
<B>Model</B>: MT2834ZDX<BR>
-<!--<B>Latest Firmware Revision Tried</B>: 1.12<BR>
-<B>Recommended Firmware Revisions</B>: 1.09 <I>and later</I><BR>
-<B>Last Updated</B>:$Date$<BR> -->
+<B>Model</B>: MT2834ZDXF (version for French market)<BR>
+<B>Model</B>: MT2834ZDXG (version for German market)<BR>
+<B>Model</B>: MT2834ZDXK (version for UK market)<BR>
+<B>Last Updated</B>: Date: 1997/10/15 04:02:00 $<BR>
+
<HR WIDTH=65% ALIGN=left SIZE=4>
</UL>
<DD>This modem is recommended for use with HylaFAX.
</DL>
+<UL>
+<LI>It has been mentioned, however, that the AT command <B>&D3</B> is broken. The
+ workround is to use &C4 in place of &C1.
+</UL>
+
<HR WIDTH=65% ALIGN=right>
<B><A NAME="Class2"><FONT SIZE=+2>C</FONT>LASS 2 <FONT SIZE=+1>S</FONT>UPPORT</A></B>
</UL>
<P>
-<a href=index.html><img src="../icons/contents.gif"
-height="38" width="30" alt=" Back to Modem Index "></a>
-<a href="nuvo-96424pfx.html"><img src="../icons/next.gif"
-height="38" width="30"> Nuvo Voyager 96424PFX</A>
+<a href=index.html><img src="../icons/contents.gif" alt=" Back to Modem Index "></a>
+<a href="nuvo-96424pfx.html"><img src="../icons/next.gif"> Nuvo Voyager 96424PFX</A>
<HR>
- <a href="../acknowledge.html#Revision">Revision</a> <i>Last updated $Date$.</i>
+<A HREF="mailto:webmaster@hylafax.org">webmaster@hylafax.org</A>.
+Last updated $Date$.
<HR>
</BODY>
</HTML>
--- /dev/null
+<HTML>
+<HEAD>
+<TITLE>Rockwell K56 Firmware</TITLE>
+</HEAD>
+<BODY>
+<BASEFONT SIZE=4>
+<B><FONT SIZE="+3">R</FONT>OCKWELL <FONT SIZE="+2">K56</FONT> <FONT SIZE="+2">F</FONT>IRMWARE</B>
+<BASEFONT SIZE=3>
+
+
+<P>
+<UL>There are many modems with the Rockwell AC/K56 firmware : for example
+
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+<B>Manufacturer</B>: Diamond Multimedia <B>Model</B>: SupraExpress 56<BR>
+<B>Manufacturer</B>: Multitech <B>Model</B>: MT5600ZDX<BR>
+<B>Manufacturer</B>: Zoom <B>Model</B>: 56Kx 2949<BR>
+<B>Last Updated</B>: Date: 1999/03/24 23:07:11 $<BR>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+</UL>
+</P>
+
+<DL COMPACT>
+<DT><IMG SRC="../icons/info_icon.gif" ALT="o">
+<DD>This firmware can be identified by the modem interrogation results:
+ <UL>
+ <LI> AT+FMFR? <PRE>ROCKWELL</PRE>
+ <LI> AT+FMDL? <PRE>AC/K56</PRE>
+ </UL>
+</DL>
+
+<HR WIDTH="65%" ALIGN=right>
+<B><A NAME="Class1"><FONT SIZE="+2">C</FONT>LASS 1 <FONT SIZE="+1">S</FONT>UPPORT</A></B>
+
+<UL>
+<LI>No comment.
+</UL>
+
+<HR WIDTH="65%" ALIGN=right>
+<B><A NAME="Class2"><FONT SIZE="+2">C</FONT>LASS 2 <FONT SIZE="+1">S</FONT>UPPORT</A></B>
+
+<P>
+Initial versions excluded Class 2 support. It is not known at what firmware version
+Class 2 support was re-introduced
+<BR>For example:
+ <UL><B>Multitech MT5600ZDX</B> bought in 1998 without Class 2 support:
+ <LI> ATI6 <I>RCV56DPF-PLL L8571A Rev 19.00/19.00</I>
+ </UL>
+
+ <UL><B>Zoom 56Kx</B> bought in early 1999 with Class 2 support
+ <LI> ATI6 <I>RCV56DPF L8570A Rev 47.24/47.24</I>
+ </UL>
+
+
+</P>
+<P>
+<!--htdig_noindex-->
+<A HREF="index.html"><IMG SRC="../icons/contents.gif"
+HEIGHT="20" WIDTH="20" ALT=" Back to Modem Index "> Modem Index </A>
+<A HREf="att-dataport.html"><IMG SRC="../icons/next.gif"
+HEIGHT="20" WIDTH="20" ALT=" Next Modem in List "> AT&T Paradyne Dataport</A>
+<!--/htdig_noindex-->
+<HR>
+
+<ADDRESS>
+webmaster@hylafax.org. Last Updated $Date$<BR>
+</ADDRESS>
+
+</BODY>
+</HTML>
<HTML>
<HEAD>
<TITLE>ZyXEL U-1496</TITLE>
-
+</HEAD>
+<BODY>
<BASEFONT SIZE=4>
-<B><FONT SIZE=+3>Z</FONT>ERO <FONT SIZE=+2>O</FONT>NE <FONT SIZE=+2>N</FONT>ETWORKING <FONT SIZE=+1>ZyXEL U-1496</FONT></B>
+<B><FONT SIZE="+3">Z</FONT>YXEL <FONT SIZE="+2">C</FONT>OMMUNICATIONS <FONT SIZE="+1">U-1496</FONT></B>
<BASEFONT SIZE=3>
<UL>
-<HR WIDTH=65% ALIGN=left SIZE=4>
-<B>Manufacturer</B>: Zero One Networking<BR>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+<B>Manufacturer</B>: ZyXEL Communications Inc.<BR>
<B>Model</B>: ZyXEL U-1496<BR>
<B>Latest Firmware Revision Tried</B>:
- V 6.13 M<BR>
+ V 6.19 M<BR>
<B>Recommended Firmware Revisions</B>:
- V 6.13 M <I>or</I>
- V 6.12 M<BR>
-<B>Last Updated</B>:$Date$<BR>
-<HR WIDTH=65% ALIGN=left SIZE=4>
+ V 6.19 M<BR>
+<B>Last Updated</B>: Date: 1999/03/28 21:22:11 $<BR>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
</UL>
<DL COMPACT>
-<DT><IMG SRC="@HTMLPATH@/icons/info_icon.gif" ALT="o">
+<DT><IMG SRC="../icons/info_icon.gif" ALT="o">
<DD>Includes
<A HREF="ZyXEL/voice.html">support for digitized voice</A>.
-<DT><IMG SRC="@HTMLPATH@/icons/info_icon.gif" ALT="o">
+<DT><IMG SRC="../icons/info_icon.gif" ALT="o">
<DD>The first modem with working Class 2.0 support.
-<DT><IMG SRC="@HTMLPATH@/icons/smiley.gif" ALT="o">
+<DT><IMG SRC="../icons/smiley.gif" ALT="o">
<DD>This modem is recommended for use with HylaFAX <EM>
-only with firmware revision 6.13 or later</EM>.
+only with firmware revision 6.19 or later</EM>.
</DL>
-<HR WIDTH=65% ALIGN=right>
-<B><A NAME="Class2"><FONT SIZE=+2>C</FONT>LASS 2 <FONT SIZE=+1>S</FONT>UPPORT</A></B>
+<HR WIDTH="65%" ALIGN=right>
+<B><A NAME="Class2"><FONT SIZE="+2">C</FONT>LASS 2 <FONT SIZE="+1">S</FONT>UPPORT</A></B>
<P>
-<EM>Most of the problems/issues listed here are fixed
+<EM>Most of the problems/issues found were fixed
in the rev 6.13 firmware.</EM>
-<UL>
-<LI><TT>AT+FMDL?</TT>
-and
-<TT>AT+FREV?</TT>
-return the same string, the concatentation of
- the modem model and the firmware revision.
-<LI>Some prom revisions do not include a trailing "<TT>OK</TT>" in response to
-<TT>AT+FDCC=?</TT>
-<LI>DC2 must be sent to the modem to trigger the transfer of Phase C
- data from the modem to the host after a <TT>AT+FDR</TT> command; this reflects
- revision 2388-B of the Class 2 spec and is different from the DC1
- required by 2388-A (and accepted by most modems)
-<LI>The modem advertises that it supports the 2DMR data format, but it
- does not; this "advertisement" is both in its result string for a
-<TT>AT+FDCC=?</TT> query and in the DIS/DCS sent to clients
-<LI>Sending 2DMR data to the modem can cause it to lock up leaving CTS
- low to the host; some versions of firmware also send an infinite
- stream of trash to the remote side when this condition occurs
-<LI>In some prom revisions the result string from a
-<TT>AT+FDCC=?</TT> query does
- not conform to any syntax listed in either 2388-B or 2388-A;
- furthermore, it requires a context sensitive parser!
-<LI><TT>AT+FDIS</TT>
-commands to set session parameters after establishing a
- connection with a remote machine are accepted but ignored; this
- makes it impossible to select/change data format (1D vs 2D encoding)
- and vertical resolution (98lpi vs 196lpi); since it is not in general
- feasible to set all session parameters before dialing the telephone,
- this problem makes it possible only to support the minimum set of
- Group 3 capabilities (1D data, 98 lpi)
-<LI>Sending non-Class 2 commands to the modem after establishing a
- connection often causes the modem to drop carrier; for example,
- <TT>ATM0</TT> before a <TT>AT+FDR</TT> command will do this;
-<LI>The line counts in the <TT>+FPTS</TT> result code during a reception are
- total nonsense; the only way to deduce the number of lines in a
- received page of data is to parse the data on the host
-<LI>In later versions (5.05 for example) the syntax of the <TT>+FPTS:</TT>
- result code violates 2388-A and/or 2388-B
-<LI>There is no way to abort a session (i.e. the <TT>AT+FK</TT> command is not
- recognized)
-<LI>When sending, the modem appears to immediately drop DCD when it
- loses carrier; this usually occurs after a final
-<TT>AT+FPTS</TT>
-is sent
- to the host, but before the requisite OK and and/or +FHNG strings;
- this action appears to be independent of whether or not DCD is
- configured to follow carrier (i.e. <TT>&C0</TT> or <TT>&C1</TT>)
-<LI>When receiving with a negotiated 14400 signalling rate, the
-<TT>+FDCS:</TT>
- status string indicates a 9600 baud signalling rate (br=3)
-<LI>The reception of multiple documents appears to cause the modem to
- hangup (i.e. an EOM post page message causes the modem to hangup)
-<LI>The modem sometimes sends received data to the host with the
- wrong bit order
-<LI>The scheme used to do adaptive-answer asserts a data carrier before
- falling back to a fax carrier; this can confuse a few fax modems and
- make it impossible to receive facsimile without disabling adaptive
- answer (<TT>AT+FAA=0</TT>)
-<LI><TT>AT+FLID?</TT> returns
-"<TT>OK</TT>" but not the current value of the local identifier.
-<LI>The modem sends the host ^S/^Q during page data transmission (<TT>AT+FDT</TT>)
- even when RTS/CTS flow control is enabled
-</UL>
-<HR WIDTH=65% ALIGN=right>
-<B><A NAME="Class2.0"><FONT SIZE=+2>C</FONT>LASS 2.0 <FONT SIZE=+1>S</FONT>UPPORT</A></B>
+<HR WIDTH="65%" ALIGN=right>
+<B><A NAME="Class2.0"><FONT SIZE="+2">C</FONT>LASS 2.0 <FONT SIZE="+1">S</FONT>UPPORT</A></B>
<UL>
-<LI>When transmitting, it is not necessary to send RTC, the
-modem will append RTC to the page data upon receiving the
-post-page message from the host.
+<LI>Several comments have been made to the mailing-list to say that this modem suffers
+ particularly from the <I>retrain negative problem</I> [ will send the first page three
+ times, then abort ].
+<LI>However, the latest firmware, <B>v6.19</B>, has been reported to solve this issue; and
+ the modem can be recommended for use with HylaFAX with this firmware revision or later.
+<LI>Problems were reported with the <b>1496EG+</b> model available in the
+ German market. The advice was to <i>get an old dusty 1496E</i>.
+<LI>A <i>99.8%</i> error free rate was the result of lowering the baud rate
+ to 19200 in both the <TT>ModemRate</TT> as well as the <b>S18</b> register.
+ These are the necessary additions to the modem config file:
+<PRE>
+# Additional reset commands:
+#
+# &B1 DTE-DCE rate is fixed at DTE setting
+# &N0 Auto-negotiate highest possible DCE-DCE link rate
+# &S0 DSR always on
+# *F0 Deny remote configuration
+# S18=3 Receive at 19200
+# S38.3=1 DCD on/off sequence follows UNIX standard; also
+# fix receiving baud rate at S18 value
+# S39=0 (avoid Class 2 compatibility hacks)
+#
+ModemResetCmds: AT&B1&N0&S0*F0S18=3S38.3=1S39=0
+#
+</PRE>
</UL>
<P>
-<A HREF="att-dataport.html"><IMG SRC="@HTMLPATH@/icons/next.gif">
-AT&T Paradyne DataPort</A>
-
+<!--htdig_noindex-->
+<A HREF="index.html"><IMG SRC="../icons/contents.gif"
+HEIGHT="20" WIDTH="20" ALT=" Back to Modem Index "> Modem Index </A>
+<A HREf="zyxel-elite.html"><IMG SRC="../icons/next.gif"
+HEIGHT="20" WIDTH="20" ALT=" Next Modem in List "> Zyxel Elite 2864 and 2864I</A>
+<!--/htdig_noindex-->
<HR>
<ADDRESS>
-Copyright © 1990, 1991, 1992, 1993, 1994 Sam Leffler<BR>
-Copyright © 1991, 1992, 1993, 1994 Silicon Graphics, Inc.<BR>
+<A HREF="mailto:webmaster@hylafax.org">webmaster@hylafax.org</A>.
+Last updated $Date$.
</ADDRESS>
</BODY>
--- /dev/null
+<HTML>
+<HEAD>
+<TITLE>ZyXEL Elite 2864, Elite 2864I</TITLE>
+</HEAD>
+<BODY>
+<BASEFONT SIZE=4>
+<B><FONT SIZE="+3">Z</FONT>XYEL <FONT SIZE="+2">C</FONT>OMMUNICATIONS <FONT SIZE="+1">Elite 2864 and 2864I</FONT></B>
+<BASEFONT SIZE=3>
+
+<UL>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+<B>Manufacturer</B>: ZyXEL Communications, Inc.<BR>
+<B>Model</B>: ZyXEL Elite 2864 and 2864I<BR>
+<I>The Elite 2864I is a modem/ISDN terminal adaptor hybrid based on the 2864</I><BR>
+<B>Recommended Firmware Revision</B>: V 1.21<BR>
+<B>Last Updated</B>: Date: 1999/07/19 20:57:11 $<BR>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+</UL>
+
+<DL COMPACT>
+<DT><IMG SRC="../icons/smiley.gif" ALT="o">
+<DD>This modem is recommended for use with HylaFAX <EM>
+only with firmware revision 1.21 or later</EM>.
+</DL>
+
+<UL><B>Release Notes</B> to revision 1.21 include under 'Fixed Fax bugs'
+<LI>While using the HylaFAX fax software to drive the modem to transmit
+ a fax, modem will send the first page three times and then disconnect
+ the call abnormally.
+</UL>
+
+<P>
+<!--htdig_noindex-->
+<A HREF="index.html"><IMG SRC="../icons/contents.gif"
+HEIGHT="20" WIDTH="20" ALT=" Back to Modem Index "> Modem Index </A>
+<A HREf="zyxel-omni.html"><IMG SRC="../icons/next.gif"
+HEIGHT="20" WIDTH="20" ALT=" Next Modem in List "> ZyXEL Omni 288S</A>
+<!--/htdig_noindex-->
+<HR>
+
+<ADDRESS>
+</ADDRESS>
+
+</BODY>
+</HTML>
--- /dev/null
+<HTML>
+<HEAD>
+<TITLE>ZyXEL Elite 2864, Elite 2864I</TITLE>
+</HEAD>
+<BODY>
+<BASEFONT SIZE=4>
+<B><FONT SIZE="+3">Z</FONT>XYEL <FONT SIZE="+2">C</FONT>OMMUNICATIONS <FONT SIZE="+1">Omni 288S</FONT></B>
+<BASEFONT SIZE=3>
+
+<UL>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+<B>Manufacturer</B>: ZyXEL Communications, Inc.<BR>
+<B>Model</B>: ZyXEL Omni 288S<BR>
+<B>Recommended Firmware Revision</B>: V 1.21<BR>
+<B>Last Updated</B>: Date: 1999/07/19 21:08:11 $<BR>
+<HR WIDTH="65%" ALIGN=left SIZE=4>
+</UL>
+
+<DL COMPACT>
+<DT><IMG SRC="../icons/smiley.gif" ALT="o">
+<DD>This modem is recommended for use with HylaFAX <EM>
+only with firmware revision 1.21 or later</EM>.
+</DL>
+
+<UL><B>Release Notes</B> to revision 1.21 include under 'Fixed Fax bugs'
+<LI>While using the HylaFAX fax software to drive the modem to transmit
+ a fax, modem will send the first page three times and then disconnect
+ the call abnormally.
+</UL>
+
+<P>
+<!--htdig_noindex-->
+<A HREF="index.html"><IMG SRC="../icons/contents.gif"
+HEIGHT="20" WIDTH="20" ALT=" Back to Modem Index "> Modem Index </A>
+<A HREf="rockwell-56k.html"><IMG SRC="../icons/next.gif"
+HEIGHT="20" WIDTH="20" ALT=" Next Modem in List "> Modems with Rockwell K56 firmware</A>
+<!--/htdig_noindex-->
+<HR>
+
+<ADDRESS>
+<A HREF="mailto:webmaster@hylafax.org">webmaster@hylafax.org</A>.
+Last updated $Date$.
+</ADDRESS>
+
+</BODY>
+</HTML>
<TD></TD>
</TR>
+<TR>
+<TD>Creatix</TD>
+<TD>LC 144VF</TD>
+<TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD ROWSPAN=4>Diamond Multimedia</TD>
+<TD><A HREF="Modems/supra-v32bis.html">SupraFAX v.32bis</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD><A HREF="Modems/supra-v32bis.html">SupraFAX v.32bis/RC32ACL</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD ALIGN=center><A HREF=#RC32ACL>@</A></TD>
+</TR>
+
+<TR>
+<TD>Supra Express 288</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD><A HREF="Modems/rockwell-56k.html">Supra Express 56</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
<TR>
<TD>Digicom</TD>
<TD><A HREF="Modems/digicom-scout.html">Scout+</A></TD>
</TR>
<TR>
-<TD>Elsa</TD>
+<TD ROWSPAN=4>Elsa</TD>
<TD>Microlink 14.4TL</TD>
<TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
<TD></TD>
</TR>
+<TR>
+<TD>Microlink 33.6 TQV</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD>Microlink Office 56k</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD>Microlink 56k Pro</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD>
+<TD></TD>
+</TR>
+
<TR>
<TD ROWSPAN=2>E-Tech, Inc.</TD>
<TD>P1496MX 5.06-SWE</TD>
</TR>
<TR>
-<TD>Acura 144, Accura 288</TD>
+<TD>Acura 144, <A HREF="Modems/hayes-accura288.html">Accura 288</A></TD>
<TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
<TD></TD>
</TR>
</TR>
<TR>
-<TD ROWSPAN=3>Multi-Tech</TD>
+<TD ROWSPAN=5>Multi-Tech</TD>
<TD><A HREF="Modems/multitech-1432.html">MT1432BA</A>, MT224BA, MT2834BA</TD>
<TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
<TD ALIGN=center><IMG SRC="icons/smiley.gif" ALT="+">, <A HREF=#Multi>*</A></TD>
</TR>
<TR>
-<TD><A HREF="Modems/multitech-1932.html">MT1932ZDX</A>, MT2834ZDX</TD>
+<TD><A HREF="Modems/multitech-1932.html">MT1932ZDX</A>,
+ <A HREF="Modems/multitech-2834.html">MT2834ZDX</A></TD>
<TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
<TD ALIGN=center><IMG SRC="icons/smiley.gif" ALT="+"></TD>
</TR>
+<TR>
+<TD>MT3334ZDX</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD><A HREF="Modems/rockwell-56k.html">MT5600ZDX</A> </TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
<TR>
<TD>NetComm</TD>
<TD>M7F</TD>
</TR>
<TR>
-<TD ROWSPAN=3>Supra</TD>
-<TD><A HREF="Modems/supra-v32bis.html">SupraFAX v.32bis</A></TD>
-<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
-<TD></TD>
-</TR>
-
-<TR>
-<TD><A HREF="Modems/supra-v32bis.html">SupraFAX v.32bis/RC32ACL</A></TD>
-<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
-<TD ALIGN=center><A HREF=#RC32ACL>@</A></TD>
-</TR>
-
-<TR>
-<TD>Express 288</TD>
-<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
-<TD></TD>
-</TR>
-
-<TR>
-<TD ROWSPAN=2>Telebit</TD>
+<TD ROWSPAN=3>Telebit</TD>
<TD><A HREF="Modems/telebit-t3000.html">T3000, WorldBlazer</A></TD>
<TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
<TD ALIGN=center><IMG SRC="icons/smiley.gif" ALT="+"></TD>
<TD></TD>
</TR>
+<TR>
+<TD>Teleblazer Desktop 33.6 Kbps</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
<TR>
<TD>Telejet</TD>
<TD>14400</TD>
</TR>
<TR>
-<TD ROWSPAN=4>USRobotics</TD>
+<TD ROWSPAN=6>3Com <BR>(was USRobotics)</TD>
<TD><A HREF="Modems/usr-courier.html">Courier v.Everything</A></TD>
<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD>
<TD></TD>
</TR>
<TR>
-<TD><A HREF="Modems/usr-sportster.html">Sportster 28.8</A></TD>
-<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>Yes</TD>
+<TD><A HREF="Modems/usr-sportster.html">Sportster 14.4</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>No</TD>
<TD></TD>
</TR>
<TR>
-<TD><A HREF="Modems/usr-sportster.html">Sportster 14.4</A></TD>
+<TD><A HREF="Modems/usr-sportster.html#Class2.0">Sportster 28.8</A>,
+<A HREF="Modems/usr-sportster.html#336">Sportster 33.6</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>Yes?</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD>Sportster 56.6 Voice</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD>Professional Message</A></TD>
<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>No</TD>
<TD></TD>
</TR>
</TR>
<TR>
-<TD>Zoom</TD>
+<TD ROWSPAN=3>Zoom Telephonics</TD>
<TD>VFX, VFP 14.4V, 14.4X</TD>
<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
<TD></TD>
</TR>
<TR>
-<TD ROWSPAN=2>Zero One Networking</TD>
-<TD><A HREF="Modems/zyxel-1496.html">ZyXEL U1496</A></TD>
+<TD>V.34X Plus</TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD><A HREF="Modems/rockwell-56k.html">56Kx</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>No</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD ROWSPAN=3>ZyXEL</TD>
+<TD><A HREF="Modems/zyxel-1496.html">U1496, U1496e+</A></TD>
<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD>
<TD ALIGN=center><IMG SRC="icons/smiley.gif" ALT="+"></TD>
</TR>
<TR>
-<TD>ZyXEL Elite 2864, Elite 2864I</TD>
+<TD><A HREF="Modems/zyxel-elite.html">Elite 2864, Elite 2864I</A></TD>
+<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD>
+<TD></TD>
+</TR>
+
+<TR>
+<TD><A HREF="Modems/zyxel-omni.html">Omni 288S</A></TD>
<TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD><TD ALIGN=center>Yes</TD>
<TD></TD>
</TR>
projects / thirdparty / HylaFAX.git / commitdiff
