+2006-05-11 Paul Eggert <eggert@cs.ucla.edu>
+
+ Sync from Automake, as follows:
+
+ 2006-05-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * config/install-sh: Initialize IFS, so field splitting isn't
+ turned off later.
+ * config/mkinstalldirs: Likewise.
+ * config/missing: Remove superfluous quotes. Replace all uses of
+ `[' by `test', for consistency, and for..
+ * config/missing (sed_minuso, sed_output): New variables.
+ (autom4te, help2man, makeinfo): Use them. Unifies detection of
+ `-o FILE', `--output FILE', `--output=FILE', stricter regex.
+ Fixes `missing' to detect `--output' for help2man. Fixes
+ PR automake/483. Report by Dennis J. Linse.
+ (autom4te): Document in `missing --help'.
+
2006-05-10 Paul Eggert <eggert@cs.ucla.edu>
- * NEWS: New macro AC_PROG__MKDIR_P. AS_MKDIR_P is now more robust.
+ * NEWS: New macro AC_PROG_MKDIR_P. AS_MKDIR_P is now more robust.
* config/install-sh: Don't use 'path' to talk about file names,
as per GNU coding standards. Close a race condition reported by Ralf
Wildenhues and Stepan Kasal. There is still a race condition
- on hosts that predate POSIX 1003.1-1992, but we can't help this.
- Don't mishandle weird characters like space on pre-POSIX hosts.
- Invoke mkdir at most once per dir arg on pre-POSIX hosts.
+ on hosts that predate Posix 1003.1-1992, but we can't help this.
+ Don't mishandle weird characters like space on pre-Posix hosts.
+ Invoke mkdir at most once per dir arg on pre-Posix hosts.
* doc/autoconf.texi (Programming in M4sh): Cross-reference to
AC_PROG_MKDIR_P from AS_MKDIR_P.
(Limitations of Usual Tools): Cross-reference to AC_PROG_MKDIR_P
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2006-01-12.21
+scriptversion=2006-05-10.23
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
-case "$1" in
+case $1 in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case "$1" in
+case $1 in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
projects / thirdparty / autoconf.git / commitdiff
