testcompat-openssl: improve testing against secured OpenSSL versions.

In Debian, and soon Ubuntu, OpenSSL is compiled with SECLEVEL=2 and
requiring minimum TLSv1.2. However, smaller hashes/keys/versions are
allowed if one enables SECLEVEL=1. Do so when testing pre v1.2 algos,
and thus enabling testing more compatability combinations.

Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>

diff --git a/tests/suite/testcompat-main-openssl b/tests/suite/testcompat-main-openssl
index 197243086a4fef232b2ca047f24cbf88de8d629c..9c50a652b5ef156c3031aa4ab81d51ace2b0829f 100755 (executable)
--- a/tests/suite/testcompat-main-openssl
+++ b/tests/suite/testcompat-main-openssl
@@ -74,7 +74,6 @@ NO_TLS1_2=$?
 
 test $NO_TLS1_2 != 0 && echo "Disabling interop tests for TLS 1.2"
 
-
 ${SERV} version|grep -e '[1-9]\.[1-9]\.[0-9]' >/dev/null 2>&1
 if test $? = 0;then
        NO_DH_PARAMS=0
@@ -82,18 +81,8 @@ else
        NO_DH_PARAMS=1
 fi
 
-# Do not use DSS or curves <=256 bits in 1.1.1+ because these
-# are not accepted by openssl on debian.
-${SERV} version|grep -e '[1-9]\.[1-9]\.[1-9]' >/dev/null 2>&1
-if test $? = 0;then
-       NO_DSS=1
-       FIPS_CURVES=1
-else
-       ${SERV} ciphers -v ALL 2>&1|grep -e DHE-DSS >/dev/null 2>&1
-       NO_DSS=$?
-fi
-
-test $FIPS_CURVES = 1 && echo "Running with FIPS140-2 enabled curves enabled"
+${SERV} ciphers -v ALL 2>&1|grep -e DHE-DSS >/dev/null 2>&1
+NO_DSS=$?
 
 if test $NO_DSS != 0;then
        echo "Disabling interop tests for DSS ciphersuites"
@@ -121,6 +110,10 @@ NO_NULL=$?
 
 test $NO_NULL != 0 && echo "Disabling interop tests for NULL ciphersuites"
 
+${SERV} ecparam -list_curves 2>&1|grep -e prime192v1 >/dev/null 2>&1
+NO_PRIME192v1=$?
+
+test $NO_PRIME192v1 != 0 && echo "Disabling interop tests for prime192v1 ecparam"
 
 if test "${NO_DH_PARAMS}" = 0;then
        OPENSSL_DH_PARAMS_OPT=""
@@ -218,7 +211,7 @@ run_client_suite() {
 
        #-cipher RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -cipher "ALL" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+       launch_bare_server $$ s_server -cipher "ALL:@SECLEVEL=1" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
        PID=$!
        wait_server ${PID}
 
@@ -267,9 +260,9 @@ run_client_suite() {
        kill ${PID}
        wait
 
-       if test "${FIPS_CURVES}" != 1; then
+       if test "${FIPS_CURVES}" != 1 && test "${NO_PRIME192v1}" != 1; then
                eval "${GETPORT}"
-               launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${RSA_KEY}" -cert "${RSA_CERT}" -named_curve prime192v1 -CAfile "${CA_CERT}" >/dev/null
+               launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${RSA_KEY}" -cert "${RSA_CERT}" -named_curve prime192v1 -CAfile "${CA_CERT}" >/dev/null
                PID=$!
                wait_server ${PID}
 
@@ -283,7 +276,7 @@ run_client_suite() {
 
                #-cipher ECDHE-ECDSA-AES128-SHA
                eval "${GETPORT}"
-               launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}" >/dev/null
+               launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}" >/dev/null
                PID=$!
                wait_server ${PID}
 
@@ -298,7 +291,7 @@ run_client_suite() {
 
        #-cipher ECDHE-ECDSA-AES128-SHA
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}" >/dev/null
+       launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}" >/dev/null
        PID=$!
        wait_server ${PID}
 
@@ -312,7 +305,7 @@ run_client_suite() {
 
        #-cipher ECDHE-ECDSA-AES128-SHA
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}" >/dev/null
+       launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}" >/dev/null
        PID=$!
        wait_server ${PID}
 
@@ -326,7 +319,7 @@ run_client_suite() {
 
        #-cipher PSK
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -tls1 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher PSK -psk 9e32cf7786321a828ef7668f09fb35db >/dev/null
+       launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -tls1 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher 'PSK:@SECLEVEL=1' -psk 9e32cf7786321a828ef7668f09fb35db >/dev/null
        PID=$!
        wait_server ${PID}
 
@@ -341,7 +334,7 @@ run_client_suite() {
                # Tests requiring openssl 1.0.1 - TLS 1.2
                #-cipher RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA
                eval "${GETPORT}"
-               launch_bare_server $$ s_server -cipher ALL -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+               launch_bare_server $$ s_server -cipher 'ALL:@SECLEVEL=1' -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
                PID=$!
                wait_server ${PID}
 
@@ -442,7 +435,7 @@ run_client_suite() {
        wait
 
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+       launch_bare_server $$ s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
        PID=$!
        wait_udp_server ${PID}
 
@@ -455,7 +448,7 @@ run_client_suite() {
        wait
 
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+       launch_bare_server $$ s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
        PID=$!
        wait_udp_server ${PID}
 
@@ -469,7 +462,7 @@ run_client_suite() {
 
        if test "${NO_DSS}" = 0; then
                eval "${GETPORT}"
-               launch_bare_server $$ s_server -cipher "ALL" -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+               launch_bare_server $$ s_server -cipher "ALL:@SECLEVEL=1" -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
                PID=$!
                wait_udp_server ${PID}
 
@@ -483,7 +476,7 @@ run_client_suite() {
        fi
 
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+       launch_bare_server $$ s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
        PID=$!
        wait_udp_server ${PID}
 
@@ -495,7 +488,7 @@ run_client_suite() {
        wait
 
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+       launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null
        PID=$!
        wait_udp_server ${PID}
 
@@ -508,7 +501,7 @@ run_client_suite() {
        wait
 
        eval "${GETPORT}"
-       launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null
+       launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null
        PID=$!
        wait_udp_server ${PID}
 
@@ -628,7 +621,7 @@ run_server_suite() {
        PID=$!
        wait_server ${PID}
 
-       ${OPENSSL_CLI} s_client -cipher DHE -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+       ${OPENSSL_CLI} s_client -cipher DHE:@SECLEVEL=1 -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -641,7 +634,7 @@ run_server_suite() {
                PID=$!
                wait_server ${PID}
 
-               ${OPENSSL_CLI} s_client -host localhost -cipher ALL -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+               ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                        fail ${PID} "Failed"
 
                kill ${PID}
@@ -655,7 +648,7 @@ run_server_suite() {
        wait_server ${PID}
 
        #-cipher ECDHE-RSA-AES128-SHA
-       ${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+       ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -669,7 +662,7 @@ run_server_suite() {
                wait_server ${PID}
 
                #-cipher ECDHE-ECDSA-AES128-SHA
-               ${OPENSSL_CLI} s_client -host localhost -tls1 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+               ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                        fail ${PID} "Failed"
 
                kill ${PID}
@@ -683,7 +676,7 @@ run_server_suite() {
        wait_server ${PID}
 
        #-cipher ECDHE-ECDSA-AES128-SHA
-       ${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+       ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -696,7 +689,7 @@ run_server_suite() {
        wait_server ${PID}
 
        #-cipher ECDHE-ECDSA-AES128-SHA
-       ${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+       ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -710,7 +703,7 @@ run_server_suite() {
                wait_server ${PID}
 
                #-cipher ECDHE-ECDSA-AES128-SHA
-               ${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+               ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                        fail ${PID} "Failed"
 
                kill ${PID}
@@ -724,7 +717,7 @@ run_server_suite() {
        wait_server ${PID}
 
        #-cipher PSK-AES128-SHA
-       ${OPENSSL_CLI} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -tls1 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \
+       ${OPENSSL_CLI} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -763,7 +756,7 @@ run_server_suite() {
                        PID=$!
                        wait_server ${PID}
 
-                       ${OPENSSL_CLI} s_client -cipher DHE -host localhost -cipher ALL -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+                       ${OPENSSL_CLI} s_client -cipher DHE -host localhost -cipher 'ALL:@SECLEVEL=1' -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                                fail ${PID} "Failed"
 
                        kill ${PID}
@@ -805,7 +798,7 @@ run_server_suite() {
                        wait_server ${PID}
 
                        #-cipher ECDHE-ECDSA-AES128-SHA
-                       ${OPENSSL_CLI} s_client -host localhost -tls1_2 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+                       ${OPENSSL_CLI} s_client -host localhost -cipher 'ALL:@SECLEVEL=1' -tls1_2 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                                fail ${PID} "Failed"
 
                        kill ${PID}
@@ -875,7 +868,7 @@ run_server_suite() {
        PID=$!
        wait_udp_server ${PID}
 
-       ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+       ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -889,7 +882,7 @@ run_server_suite() {
        wait_udp_server ${PID}
 
 
-       ${OPENSSL_CLI} s_client -cipher DHE -host localhost -port "${PORT}" -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+       ${OPENSSL_CLI} s_client -cipher DHE -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                fail ${PID} "Failed"
 
        kill ${PID}
@@ -903,7 +896,7 @@ run_server_suite() {
                wait_udp_server ${PID}
 
 
-               ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cipher ALL -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
+               ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
                        fail ${PID} "Failed"
 
                kill ${PID}