]> git.ipfire.org Git - thirdparty/kernel/linux.git/commitdiff
pinctrl-amd: Don't clear S4 wake bits at probe
authorMario Limonciello <mario.limonciello@amd.com>
Mon, 20 Jul 2026 16:28:44 +0000 (11:28 -0500)
committerLinus Walleij <linusw@kernel.org>
Sat, 25 Jul 2026 09:32:03 +0000 (11:32 +0200)
commit 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again")
introduced a regression where Wake-on-LAN no longer works after suspend
or shutdown on some AMD platforms.

Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI
PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake
sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME
does not use GPIO IRQ infrastructure and relies on firmware configuration.

The original intent of commit 6bc3462a0f5e ("pinctrl: amd: Mask wake
bits on probe again") was to clear spurious wake bits left by firmware
to prevent unwanted wakeups. However, S4 wake bits are used for
hardware-level wake sources like WoL that bypass the kernel's IRQ wake
API.

Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits:
- Firmware-configured S4 wake sources (WoL) continue working
- Kernel maintains control of S3/S0i3 wake policy via set_wake()
- S3-only wake sources work correctly per commit f31f33dbb3ba ("pinctrl:
  amd: Take suspend type into consideration which pins are non-wake")

The trade-off is that firmware-programmed spurious S4 wake bits remain
set, but this is less problematic than breaking WoL.

Fixes: 6bc3462a0f5e ("pinctrl: amd: Mask wake bits on probe again")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
drivers/pinctrl/pinctrl-amd.c

index e3128b0045d22e8cba4775a1ef3726fdf448ca96..15a398bb3be23eba936cf7f5fd7945eb9fe2a9e7 100644 (file)
@@ -884,8 +884,7 @@ static void amd_gpio_irq_init(struct amd_gpio *gpio_dev)
        u32 pin_reg, mask;
        int i;
 
-       mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) |
-               BIT(WAKE_CNTRL_OFF_S4);
+       mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3);
 
        for (i = 0; i < desc->npins; i++) {
                int pin = desc->pins[i].number;