From: Jacky Bai Date: Tue, 28 Apr 2026 09:05:17 +0000 (+0800) Subject: imx8mp_evk: Fix the ND mode VDD_SOC voltage X-Git-Url: http://git.ipfire.org/gitweb/?a=commitdiff_plain;h=5841eff4d2d8344f8d783bda442d1f33b319fc37;p=thirdparty%2Fu-boot.git imx8mp_evk: Fix the ND mode VDD_SOC voltage The 'CONFIG_IS_ENBLAED' check only works when there is a CONFIG_SPL_IMX8M_VDD_SOC_850MV config a option is defined and enabled. So use the 'IS_ENABLED' macro instead to fix the ND mode VDD_SOC voltage. Signed-off-by: Jacky Bai Signed-off-by: Ye Li Reviewed-by: Peng Fan --- diff --git a/board/nxp/imx8mp_evk/spl.c b/board/nxp/imx8mp_evk/spl.c index 27cd82e745a..cd7d79b382d 100644 --- a/board/nxp/imx8mp_evk/spl.c +++ b/board/nxp/imx8mp_evk/spl.c @@ -65,7 +65,7 @@ int power_init_board(void) * Enable DVS control through PMIC_STBY_REQ and * set B1_ENMODE=1 (ON by PMIC_ON_REQ=H) */ - if (CONFIG_IS_ENABLED(IMX8M_VDD_SOC_850MV)) + if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV)) pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14); else pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1C);