From: Lorenzo Bianconi Date: Tue, 14 Apr 2026 14:08:52 +0000 (+0200) Subject: net: airoha: Wait for NPU PPE configuration to complete in airoha_ppe_offload_setup() X-Git-Tag: v7.1-rc1~36^2~68 X-Git-Url: http://git.ipfire.org/gitweb/?a=commitdiff_plain;h=f3206328bb52c2787197d80d7cbd687946047d5f;p=thirdparty%2Fkernel%2Flinux.git net: airoha: Wait for NPU PPE configuration to complete in airoha_ppe_offload_setup() In order to properly enable flowtable hw offloading, poll REG_PPE_FLOW_CFG register in airoha_ppe_offload_setup routine and wait for NPU PPE configuration triggered by ppe_init callback to complete before running airoha_ppe_hw_init(). Fixes: 00a7678310fe3 ("net: airoha: Introduce flowtable offload support") Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260414-airoha-wait-for-npu-config-offload-setup-v2-1-5a9bf6d43aee@kernel.org Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/ethernet/airoha/airoha_ppe.c b/drivers/net/ethernet/airoha/airoha_ppe.c index 03115c1c1063..859818676b69 100644 --- a/drivers/net/ethernet/airoha/airoha_ppe.c +++ b/drivers/net/ethernet/airoha/airoha_ppe.c @@ -1356,6 +1356,29 @@ static struct airoha_npu *airoha_ppe_npu_get(struct airoha_eth *eth) return npu; } +static int airoha_ppe_wait_for_npu_init(struct airoha_eth *eth) +{ + int err; + u32 val; + + /* PPE_FLOW_CFG default register value is 0. Since we reset FE + * during the device probe we can just check the configured value + * is not 0 here. + */ + err = read_poll_timeout(airoha_fe_rr, val, val, USEC_PER_MSEC, + 100 * USEC_PER_MSEC, false, eth, + REG_PPE_PPE_FLOW_CFG(0)); + if (err) + return err; + + if (airoha_ppe_is_enabled(eth, 1)) + err = read_poll_timeout(airoha_fe_rr, val, val, USEC_PER_MSEC, + 100 * USEC_PER_MSEC, false, eth, + REG_PPE_PPE_FLOW_CFG(1)); + + return err; +} + static int airoha_ppe_offload_setup(struct airoha_eth *eth) { struct airoha_npu *npu = airoha_ppe_npu_get(eth); @@ -1369,6 +1392,11 @@ static int airoha_ppe_offload_setup(struct airoha_eth *eth) if (err) goto error_npu_put; + /* Wait for NPU PPE configuration to complete */ + err = airoha_ppe_wait_for_npu_init(eth); + if (err) + goto error_npu_put; + ppe_num_stats_entries = airoha_ppe_get_total_num_stats_entries(ppe); if (ppe_num_stats_entries > 0) { err = npu->ops.ppe_init_stats(npu, ppe->foe_stats_dma,