From: William Theesfeld Date: Tue, 2 Jun 2026 11:19:12 +0000 (-0400) Subject: scsi: lpfc: Fix spelling mistakes in comments X-Git-Url: http://git.ipfire.org/gitweb/?a=commitdiff_plain;h=fc6f9719e68d4133f2a373e1c6826fdef8bb1a34;p=thirdparty%2Fkernel%2Flinux.git scsi: lpfc: Fix spelling mistakes in comments Comment-only changes across the lpfc driver, found by running scripts/checkpatch.pl with the kernel's scripts/spelling.txt list against drivers/scsi/lpfc/. No functional impact. v1 covered a single site in lpfc_bsg.c. v2 expands to all checkpatch-detected comment misspellings across the driver, per review feedback from Justin Tee on the v1 thread. Identifiers that happen to match common-typo entries (e.g. LSEXP_CANT_GIVE_DATA, LPFC_FC_LA_TOP_UNKOWN) are intentionally left untouched, as renaming them would change the driver's internal API. Signed-off-by: William Theesfeld Reviewed-by: Justin Tee Link: https://patch.msgid.link/20260602111912.23864-1-william@theesfeld.net Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index c91fa44b12d4..f4e8164b94ab 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -84,7 +84,7 @@ const char *const trunk_errmsg[] = { /* map errcode */ }; /** - * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules + * lpfc_jedec_to_ascii - Hex to ascii converter according to JEDEC rules * @incr: integer to convert. * @hdw: ascii string holding converted integer plus a string terminator. * @@ -1748,12 +1748,12 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** - * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness + * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readiness * @phba: lpfc_hba pointer. * * Description: * SLI4 interface type-2 device to wait on the sliport status register for - * the readyness after performing a firmware reset. + * the readiness after performing a firmware reset. * * Returns: * zero for success, -EPERM when port does not have privilege to perform the @@ -5403,7 +5403,7 @@ lpfc_vport_param_store(max_scsicmpl_time); static DEVICE_ATTR_RW(lpfc_max_scsicmpl_time); /* -# lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value +# lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgment. Value # range is [0,1]. Default value is 0. */ LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support"); @@ -5482,7 +5482,7 @@ LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary " /* # lpfc_multi_ring_rctl: If lpfc_multi_ring_support is enabled, this # identifies what rctl value to configure the additional ring for. -# Value range is [1,0xff]. Default value is 4 (Unsolicated Data). +# Value range is [1,0xff]. Default value is 4 (Unsolicited Data). */ LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1, 255, "Identifies RCTL for additional ring configuration"); diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 7406dfa60016..c95165905483 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -2066,12 +2066,12 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct bsg_job *job) if (rc) goto job_done; - /* indicate we are in loobpack diagnostic mode */ + /* indicate we are in loopback diagnostic mode */ spin_lock_irq(&phba->hbalock); phba->link_flag |= LS_LOOPBACK_MODE; spin_unlock_irq(&phba->hbalock); - /* reset port to start frome scratch */ + /* reset port to start from scratch */ rc = lpfc_selective_reset(phba); if (rc) goto job_done; @@ -5003,7 +5003,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct bsg_job *job, } else if (phba->sli_rev == LPFC_SLI_REV4) { /* Let type 4 (well known data) through because the data is * returned in varwords[4-8] - * otherwise check the recieve length and fetch the buffer addr + * otherwise check the receive length and fetch the buffer addr */ if ((pmb->mbxCommand == MBX_DUMP_MEMORY) && (pmb->un.varDmp.type != DMP_WELL_KNOWN)) { diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 4e3fe89283e4..52fc5058976d 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -4850,7 +4850,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, case IOSTAT_LS_RJT: stat.un.ls_rjt_error_be = cpu_to_be32(ulp_word4); - /* Added for Vendor specifc support + /* Added for Vendor specific support * Just keep retrying for these Rsn / Exp codes */ if (test_bit(FC_PT2PT, &vport->fc_flag) && diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index f3a85f6c796e..c9b02d2c6305 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1845,7 +1845,7 @@ lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec, * @flag: flag bits to be set to the driver fcf record. * * This routine updates the driver FCF record from the new HBA FCF record - * together with the address mode, vlan_id, and other informations. This + * together with the address mode, vlan_id, and other information. This * routine is called with the hbalock held. **/ static void @@ -2120,7 +2120,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba, /** * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event. * @phba: pointer to lpfc hba data structure. - * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned. + * @unreg_fcf: Unregister FCF if FCF table need to be re-scanned. * * This function check if there is any fcoe event pending while driver * scan FCF entries. If there is any pending event, it will restart the @@ -2290,7 +2290,7 @@ lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, * @vlan_id: the lowest vlan identifier associated to this fcf record. * @next_fcf_index: the index to the next fcf record in hba's fcf table. * - * This routine logs the detailed FCF record if the LOG_FIP loggin is + * This routine logs the detailed FCF record if the LOG_FIP login is * enabled. **/ static void @@ -3475,7 +3475,7 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) phba->fc_edtov = ed_tov; phba->fc_ratov = (2 * ed_tov) / 1000; if (phba->fc_ratov < FF_DEF_RATOV) { - /* RA_TOV should be atleast 10sec for initial flogi */ + /* RA_TOV should be at least 10sec for initial flogi */ phba->fc_ratov = FF_DEF_RATOV; } @@ -5239,7 +5239,7 @@ lpfc_set_unreg_login_mbx_cmpl(struct lpfc_hba *phba, struct lpfc_vport *vport, * Free rpi associated with LPFC_NODELIST entry. * This routine is called if the driver initiates a LOGO that completes * successfully, and we are waiting to PLOGI back to the remote NPort. - * In addition, it is called after we receive and unsolicated ELS cmd, + * In addition, it is called after we receive and unsolicited ELS cmd, * send back a rsp, the rsp completes and we are waiting to PLOGI back * to the remote NPort. */ @@ -6551,7 +6551,7 @@ lpfc_nlp_init(struct lpfc_vport *vport, uint32_t did) return ndlp; } -/* This routine releases all resources associated with a specifc NPort's ndlp +/* This routine releases all resources associated with a specific NPort's ndlp * and mempool_free's the nodelist. */ static void diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index f91bde4a6c38..41fa8f3329da 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -3256,7 +3256,7 @@ struct lpfc_mbx_memory_dump_type3 { /* - * Tranceiver codes Fibre Channel SFF-8472 + * Transceiver codes Fibre Channel SFF-8472 * Table 3.5. */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 968a25235a2d..82af59c913e9 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4103,7 +4103,7 @@ lpfc_sli4_els_sgl_update(struct lpfc_hba *phba) &phba->sli4_hba.lpfc_els_sgl_list); spin_unlock_irq(&phba->sli4_hba.sgl_list_lock); } else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) { - /* els xri-sgl shrinked */ + /* els xri-sgl shrunk */ xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt; lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "3158 ELS xri-sgl count decreased from " @@ -8024,7 +8024,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) * Initialize driver internal slow-path work queues */ - /* Driver internel slow-path CQ Event pool */ + /* Driver internal slow-path CQ Event pool */ INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool); /* Response IOCB work queue list */ INIT_LIST_HEAD(&phba->sli4_hba.sp_queue_event); @@ -9740,7 +9740,7 @@ lpfc_create_bootstrap_mbox(struct lpfc_hba *phba) * Initialize the bootstrap mailbox pointers now so that the register * operations are simple later. The mailbox dma address is required * to be 16-byte aligned. Also align the virtual memory as each - * maibox is copied into the bmbx mailbox region before issuing the + * mailbox is copied into the bmbx mailbox region before issuing the * command to the port. */ phba->sli4_hba.bmbx.dmabuf = dmabuf; @@ -10206,7 +10206,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) goto read_cfg_out; } - /* search for fc_fcoe resrouce descriptor */ + /* search for fc_fcoe resource descriptor */ get_func_cfg = &pmb->u.mqe.un.get_func_cfg; pdesc_0 = (char *)&get_func_cfg->func_cfg.desc[0]; @@ -10414,7 +10414,7 @@ lpfc_alloc_io_wq_cq(struct lpfc_hba *phba, int idx) * * Return codes * 0 - successful - * -ENOMEM - No availble memory + * -ENOMEM - No available memory * -EIO - The mailbox failed to complete successfully. **/ int @@ -12490,7 +12490,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors) /* If so, find a new_cpup that is on the SAME * phys_id as cpup. start_cpu will start where we - * left off so all unassigned entries don't get assgined + * left off so all unassigned entries don't get assigned * the IRQ of the first entry. */ new_cpu = start_cpu; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 1dce33b79beb..f2cab134af7f 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -2497,7 +2497,7 @@ lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, /* * If we are in DIF Type 1 mode every data block has a 8 byte - * DIF (trailer) attached to it. Must ajust FCP data length + * DIF (trailer) attached to it. Must adjust FCP data length * to account for the protection data. */ fcpdl += (fcpdl / scsi_prot_interval(sc)) * 8; @@ -2596,7 +2596,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, lpfc_cmd->prot_seg_cnt = protsegcnt; /* - * There is a minimun of 4 BPLs used for every + * There is a minimum of 4 BPLs used for every * protection data segment. */ if ((lpfc_cmd->prot_seg_cnt * 4) > @@ -2678,7 +2678,7 @@ err: /* * This function calcuates the T10 DIF guard tag - * on the specified data using a CRC algorithmn + * on the specified data using a CRC algorithm * using crc_t10dif. */ static uint16_t @@ -2694,7 +2694,7 @@ lpfc_bg_crc(uint8_t *data, int count) /* * This function calcuates the T10 DIF guard tag - * on the specified data using a CSUM algorithmn + * on the specified data using a CSUM algorithm * using ip_compute_csum. */ static uint16_t @@ -3378,7 +3378,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, lpfc_cmd->prot_seg_cnt = protsegcnt; /* - * There is a minimun of 3 SGEs used for every + * There is a minimum of 3 SGEs used for every * protection data segment. */ if (((lpfc_cmd->prot_seg_cnt * 3) > @@ -5712,7 +5712,7 @@ lpfc_taskmgmt_name(uint8_t task_mgmt_cmd) * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_io_buf data structure. * - * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeded + * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeeded * * Return code : * 0x2003 - Error diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 0e56e7034566..62a30a92b792 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1155,9 +1155,9 @@ lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, * * This function takes the hbalock. * The active bit is always set in the active rrq xri_bitmap even - * if there is no slot avaiable for the other rrq information. + * if there is no slot available for the other rrq information. * - * returns 0 rrq actived for this xri + * returns 0 rrq activated for this xri * < 0 No memory or invalid ndlp. **/ int @@ -4827,11 +4827,11 @@ lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask) } /** - * lpfc_sli_brdready - Wrapper func for checking the hba readyness + * lpfc_sli_brdready - Wrapper func for checking the hba readiness * @phba: Pointer to HBA context object. * @mask: Bit mask to be checked. * - * This routine wraps the actual SLI3 or SLI4 hba readyness check routine + * This routine wraps the actual SLI3 or SLI4 hba readiness check routine * from the API jump table function pointer from the lpfc_hba struct. **/ int @@ -8512,7 +8512,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) if (unlikely(rc)) return -ENODEV; - /* Check the HBA Host Status Register for readyness */ + /* Check the HBA Host Status Register for readiness */ rc = lpfc_sli4_post_status_check(phba); if (unlikely(rc)) return -ENODEV; @@ -9984,7 +9984,7 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) phba->sli.mbox_active = mboxq; spin_unlock_irqrestore(&phba->hbalock, iflag); - /* wait for bootstrap mbox register for readyness */ + /* wait for bootstrap mbox register for readiness */ rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq); if (rc) goto exit; @@ -13955,7 +13955,7 @@ unplug_error: * device-level interrupt handler. When the PCI slot is in error recovery * or the HBA is undergoing initialization, the interrupt handler will not * process the interrupt. The SCSI FCP fast-path ring event are handled in - * the intrrupt context. This function is called without any lock held. + * the interrupt context. This function is called without any lock held. * It gets the hbalock to access and update SLI data structures. * * This function returns IRQ_HANDLED when interrupt is handled else it @@ -15561,7 +15561,7 @@ lpfc_sli4_dly_hba_process_cq(struct work_struct *work) * device-level interrupt handler. When the PCI slot is in error recovery * or the HBA is undergoing initialization, the interrupt handler will not * process the interrupt. The SCSI FCP fast-path ring event are handled in - * the intrrupt context. This function is called without any lock held. + * the interrupt context. This function is called without any lock held. * It gets the hbalock to access and update SLI data structures. Note that, * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is * equal to that of FCP CQ index. @@ -16003,7 +16003,7 @@ lpfc_dpp_wc_map(struct lpfc_hba *phba, uint8_t dpp_barset) * On success this function will return a zero. If unable to allocate * enough memory this function will return -ENOMEM. If a mailbox command * fails this function will return -ENXIO. Note: on ENXIO, some EQs may - * have had their delay multipler changed. + * have had their delay multiplier changed. **/ void lpfc_modify_hba_eq_delay(struct lpfc_hba *phba, uint32_t startq, @@ -20452,7 +20452,7 @@ lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *phba) /* * If next fcf index is not found check if there are lower * Priority level fcf's in the fcf_priority list. - * Set up the rr_bmask with all of the avaiable fcf bits + * Set up the rr_bmask with all of the available fcf bits * at that level and continue the selection process. */ } while (lpfc_check_next_fcf_pri_level(phba)); @@ -21696,7 +21696,7 @@ void lpfc_adjust_high_watermark(struct lpfc_hba *phba, u32 hwqid) * @phba: pointer to lpfc hba data structure. * @hwqid: belong to which HWQ. * - * This routine is called from hearbeat timer when pvt_pool is idle. + * This routine is called from heartbeat timer when pvt_pool is idle. * All free XRIs are moved from private to public pool on hwqid with 2 steps. * The first step moves (all - low_watermark) amount of XRIs. * The second step moves the rest of XRIs. diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index e2b95fb50d55..cf61370ad025 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -336,7 +336,7 @@ struct lpfc_fcf { #define FCF_AVAILABLE 0x01 /* FCF available for discovery */ #define FCF_REGISTERED 0x02 /* FCF registered with FW */ #define FCF_SCAN_DONE 0x04 /* FCF table scan done */ -#define FCF_IN_USE 0x08 /* Atleast one discovery completed */ +#define FCF_IN_USE 0x08 /* At Least one discovery completed */ #define FCF_INIT_DISC 0x10 /* Initial FCF discovery */ #define FCF_DEAD_DISC 0x20 /* FCF DEAD fast FCF failover discovery */ #define FCF_ACVL_DISC 0x40 /* All CVL fast FCF failover discovery */