Ben Dooks [Tue, 24 Mar 2026 13:34:03 +0000 (13:34 +0000)]
ASoC: SOF: sof-audio: pcm_id is __le32
The pcm_id value is __le32 so convert it before passing to the dev_dbg
function to be printed. Also fixup some other uses of __le32 data and
a couple of places where %u should have been used instead of %d
Picked up by sparse prototype for variadic and printf
function checking. Fixes a large number of sparse warnings, such as:
sound/soc/sof/pcm.c:84:25: warning: incorrect type in argument 4 (different base types)
sound/soc/sof/pcm.c:84:25: expected unsigned int
sound/soc/sof/pcm.c:84:25: got restricted __le32 [usertype] pcm_id
Niranjan H Y [Tue, 24 Mar 2026 04:12:59 +0000 (09:42 +0530)]
ASoC: sdw_utils: add vendor_id to asoc_sdw_codec_info
struct asoc_sdw_codec_info has part_id which is not
sufficient to uniquely identify devices. This change
adds the vendor_id field and updates the codec_info
list with the corresponding vendor id as per the
Manufacturer's id in https://mid.mipi.org/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260324041300.784-1-niranjan.hy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
Chen-Yu Tsai [Mon, 23 Mar 2026 17:24:48 +0000 (01:24 +0800)]
ASoC: sun4i-spdif: Make reset control non-optional and check for all errors
The logic around the reset control is weird. The driver already has
quirks describing which compatible strings require a reset control, but
the reset control is acquired using the "optional" API. Then any errors
other than deferred probe are ignored.
Instead, switch to the non-optional variant. Also use the deassered
variant to simplify the code. This also fixes a missing reset assert
upon removal.
Last, clean up the error message printing with dev_err_probe().
Ben Dooks [Mon, 23 Mar 2026 17:56:04 +0000 (17:56 +0000)]
ASoC: soc-topology: fix __le32 conversion in printed values
A number of dev_dbg() and dev_err() calls get passed values that are
of __le32 type which does not get noticed by sparse until my variadic
checking patches.
There are a number of these, and we should probably fix these up.
The sparse warnings are numerous so the first few are listed here that
this patch fixes:
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 4 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] get
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 5 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] put
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 6 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] info
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 4 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] get
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 5 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] put
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 6 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] info
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 4 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] get
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 5 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] put
sound/soc/soc-topology.c:226:9: warning: incorrect type in argument 6 (different base types)
sound/soc/soc-topology.c:226:9: expected int
sound/soc/soc-topology.c:226:9: got restricted __le32 [usertype] info
Kexin Sun [Sat, 21 Mar 2026 11:50:18 +0000 (19:50 +0800)]
ASoC: generic: update outdated comment for removed soc_bind_dai_link()
The function soc_bind_dai_link() was first merged into
snd_soc_add_dai_link() by commit 63dc47da1f39 ("ASoC: soc-core: merge
snd_soc_add_dai_link() and soc_bind_dai_link()"), and later renamed to
snd_soc_add_pcm_runtime() by commit 0c04800424c4 ("ASoC: soc-core:
rename snd_soc_add_dai_link() to snd_soc_add_pcm_runtime()").
In simple-card.c, also adjust the wording since snd_soc_add_pcm_runtime()
no longer uses "xxx_of_node" fields but matches components by of_node
through snd_soc_find_dai() and snd_soc_is_matching_component().
In simple-card-utils.c, simply update the function name to its
successor snd_soc_add_pcm_runtime().
Arnd Bergmann [Fri, 20 Mar 2026 15:17:31 +0000 (16:17 +0100)]
ASoC: wm_adsp: select CONFIG_SND_SOC_WM_ADSP from all users
The addition of the kunit test made it possible to enable the WM_ADSP
driver even when there are no users. However, an unintended side-effect
was that it is also possible to turn it off when it is actually required,
leading to build failures:
Reverse the logic to replace the ununual list of 'default y if ....' with
the regular 'select' that do the same thing but prevent it from being
disabled if that would break the build.
Fixes: bf2d44d07de7 ("ASoC: wm_adsp: Add kunit test for firmware file search") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260320151752.3439218-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
This patchset adds new snd_soc_component_regmap_val_bytes(),
and remove component->val_bytes / snd_soc_component_setup_regmap().
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
ASoC: soc-ops: use snd_soc_component_regmap_val_bytes()
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
ASoC: tegra: use snd_soc_component_regmap_val_bytes()
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
Charles Keepax [Wed, 18 Mar 2026 10:38:13 +0000 (10:38 +0000)]
ASoC: wm_adsp: Fix crash in kunit tests on arm64
Several of the wm_adsp kunit tests failed by only on arm64. This
turns out to be passing things to release_firmware which were not
allocated with request_firmware. This does actually drop some
errors on other platforms but somehow doesn't cause the tests to
fail, and kunit hides a lot of the output for passing tests.
There is a comment in the code regarding this exact thing in
wm_adsp_fw_find_test_case_exit(), but then it goes on and
does it anyway. I suspect maybe there was a plan to override
wm_adsp_release_firmware_files() that got forgotten, as the
function appears to have hooks for kunit that aren't used. Anyway
for now implement a simple fix of freeing the filenames
locally. It is likely a more detailed fix will be implemented in
the near future but this should get things moving again.
James Calligeros [Sat, 14 Mar 2026 00:27:11 +0000 (10:27 +1000)]
ASoC: codecs: cs42l84: set up PLL for more sample rates
Previously, this driver only advertised support for 48 kHz and
96 kHz sample rates, as there was no PLL configuration data
specified for any other sample rate/BCLK.
The CS42L84 is an Apple-specific variant of CS42L42. The PLL
configuration parameters for a variety of common BCLKs are
available in the latter's datasheet. What happens if we just
use those? As it turns out, they work just fine.
Fill out more PLL config parameters in the PLL config lookup
table, and advertise the corresponding sample rates to userspace.
This enables 44.1, 88.2, 176.4 and 192 kHz output and input.
Mark Brown [Mon, 16 Mar 2026 18:45:30 +0000 (18:45 +0000)]
ASoC: Handle edge case on SDCA jack control naming
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Normally the SDCA jack detection controls will be named after the GE
widget that represents the grouping of everything in the topology
controlled by the jack selection. However, in the case that the jack
selection only controls a single widget the control will be named after
the SU widget that implements that. It is rather confusing to have the
jack detection controls change naming scheme between devices. Add a new
widget type, similar to mixer widgets, to force use of the control name
rather than falling back to the widget names.
Charles Keepax [Tue, 3 Mar 2026 15:53:08 +0000 (15:53 +0000)]
ASoC: SDCA: Use named control mux for GE/SU controls
Most of the time a GE Entity will control many SU Entities and thus the
generated control will use the control name, since the control is
shared. However, in rare cases the GE Entity will only control a single
SU Entity. In this case the control is only linked to a single SU widget
and will thus inherit the name from that. This leads to the naming for
the Selected Mode control to be unpredictable. Update to use the new
named control muxes to always force the use of the control name.
Charles Keepax [Tue, 3 Mar 2026 15:53:07 +0000 (15:53 +0000)]
ASoC: dapm: Add a named controls variant of a mux widget
There is already a version of the mixer widget that forces use of the
specified control name, rather than factoring in the widget name. Add
the same feature for mux widgets.
ASoC: codecs: wcd-clsh: Always update buck/flyback on transitions on transitions
The WCD934x audio outputs (earpiece, headphone, speaker) share two power
supply converters, a buck and a flyback, managed by reference counters
(buck_users, flyback_users) in the Class-H controller.
The early return in wcd_clsh_ctrl_set_state() when nstate == ctrl->state
prevented _wcd_clsh_ctrl_set_state() from being called when switching
between outputs sharing the same state value. As a result, the buck and
flyback reference counters were never decremented on disable, leaving the
converters active and their counters out of sync with the actual hardware
state.
This caused audible distortion on the earpiece output and spurious MBHC
over-current protection interrupts on HPHL/HPHR during output switching.
Remove the early return so that CLSH_REQ_ENABLE and CLSH_REQ_DISABLE are
always dispatched, keeping the buck and flyback reference counters
consistent on every state transition.
Mark Brown [Mon, 16 Mar 2026 18:14:41 +0000 (18:14 +0000)]
ASoC: soc_sdw_utils: remove snd_soc_sdca codec name index
Bard Liao <yung-chuan.liao@linux.intel.com> says:
The index could change if any endpoint is not present. Remove the index
and let the machine driver get the right codec name from the registered
components.
Bard Liao [Mon, 16 Mar 2026 01:03:08 +0000 (09:03 +0800)]
ASoC: soc_sdw_utils: remove codec name index of snd_soc_sdca codecs
The index could change if any endpoint is not present. Remove the index
and let the machine driver get the right codec name from the registered
components.
Bard Liao [Mon, 16 Mar 2026 01:03:07 +0000 (09:03 +0800)]
ASoC: soc_sdw_utils: remove cs42l45 SmartMic codec name index
Currently the index is 0. In theory, it will not change even if any
other endpoint is not present. But to be consistent and avoid surprise,
remove the index and let the machine driver match the codec name
partially.
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066007 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502787 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Because it has no functional significance, 1 patch is for 1 vender.
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066007 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502787 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Linus Walleij [Sat, 14 Mar 2026 22:56:49 +0000 (23:56 +0100)]
ASoC: codec: arizona: Convert to use GPIO descriptors
This converts the Arizona driver to use GPIO descriptors
exclusively, deletes the legacy code path an updates the
in-tree user of legacy GPIO.
The GPIO lines for mic detect polarity and headphone ID
detection are made exclusively descriptor-oriented. The
headphone ID detection could actually only be used by
the legacy GPIO code, but I converted it to use a
descriptor if someone would actually need it so we don't
just drop useful code.
The compatible "wlf,hpdet-id-gpio" is not in the device
tree bindings and only intended to be used by software
nodes if any. If someone insists I can try to add a
binding for it, but I doubt there is any real user so
it seems pointless.
Signed-off-by: Linus Walleij <linusw@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260314-asoc-arizona-v1-1-ecc9a165307c@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 16 Mar 2026 01:13:07 +0000 (01:13 +0000)]
ASoC: basic support for configuring bus keepers
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces some infrastructure to allow platform drivers
to specify what a DAI should be doing when it is not active on the
bus. The primary use case for this is configuring bus keepers which
may be integrated into various codecs. The instigating use case for
this functionality is an interesting bus topology on Apple Silicon
laptops with multiple codecs.
Most Apple Silicon laptops have six codecs split into groups of
three, driving a pair of dual opposed woofers and a tweeter for
L/R stereo sound. These codecs report the voltage and current across
their connected voice coils back to the SoC via the SDOUT pin,
represented as PCM data sent via configurable TDM slots. This data is
used in conjunction with the connected speaker's Thiele/Small Parameters
to ensure that the speaker is not being driven to levels that would
permanently damage them. This is integrated into CoreAudio on macOS.
speakersafetyd[1] handles this for Linux.
All of the codec SDOUT pins are attached to a single receiver port
on the SoC's I2S peripheral, however are split across two physical
data lines (one each for the left and right codec groups). The receiver
has an OR gate in front of it, which is used to sum the two lines.
If at any point a codec is trying to transmit data, and the "opposite"
line ends up floating high, the transmitting codec's data will be
corrupted. We need to guarantee that the idle line stays idle.
In the downstream Asahi Linux kernel[2], we set up one codec in each
group to zero-fill or pull down its line while a codec on the opposite
line is actively transmitting. This is done entirely in the codec
driver, however this approach is over-fit for this one use case. This
sort of functionality may also be of use for other hardware, so following
previous mailing list discussions[3], I have tried to expose the
functionality in a more configurable and generic way.
I have integrated this approach into our downstream platform driver
and select Devicetrees as an example of how this mechanism is intended
to be used[4].
ASoC: tas2770: expose SDOUT bus keeper via set_tdm_idle
TAS2770 includes a bus keeper which can be used to control the behaviour
of the SDOUT pin during specified TDM slots. The chip can either pull
the pin to ground, actively transmit zeroes, or keep the pin floating
(default/uninitialised behaviour).
Expose the bus keeper via the set_tdm_idle DAI op so that it can be
configured by consumers.
ASoC: tas2764: expose SDOUT bus keeper via set_tdm_idle operation
TAS2764, and the Apple-exclusive variant SN012776, include bus keepers
on the SDOUT pin that can be configured to alter the behaviour of the
SDOUT pin during specified TDM slots. The chip can either leave the
bus floating (default/uninitialised behaviour) or fill the specified
slots with zeroes.
Expose the SDOUT bus keeper and allow it to be configured using the
set_tdm_idle DAI op. The mask must be cropped to only cover slots
valid for the configured BCLK ratio, so introduce a set_bclk_ratio
op that properly configures this.
ASoC: soc-dai: add common operation to set TDM idle mode
Some audio devices, like certain Texas Instruments codecs, integrate
configurable bus keepers that dictate the codec's behaviour during
idle TDM slots. Now that we have definitions for various idle modes,
add a snd_soc_dai_set_tdm_idle() operation to control this in a
standardised way.
This is useful on Apple Silicon laptops, where a single I2S bus is
comprised of two physical lines which are ORed just before the
receiving port. When a codec on one line is transmitting, we must
guarantee that the other line is low. We can achieve this by
configuring one codec on each line to use its bus keeper to fill
its line with zeroes during the active slots of the other line.
ASoC: soc-dai: define possible idle TDM slot modes
Some audio devices, such as certain Texas Instruments codecs,
include configurable bus keepers. We currently don't have
a standardised way to configure such hardware, and instead
rely on the hardware initialising setting itself up into a
sane state. There are situations where this is insufficient,
however, and some platforms require more concrete guarantees
as to the state of the bus, and being able to explicitly
configure bus keepers enables this.
For example, some Apple Silicon machines have an odd bus topology where
the SDOUT pins of all codecs are split across two data lines, which
are summed via an OR gate in front of the receiving port on the
SoC's I2S peripheral. Each line must transmit 0 while a codec
on the other line is actively transmitting data, or the SoC
will receive garbage data. To do this, one codec on each line
must be configured to transmit zeroes during the other line's
active TDM slots.
Thus, we define seven possible bus-keeping modes that a device can
be in: NONE (UB/as initialised), OFF (explicitly disabled), ZERO
(actively transmit a 0), PULLDOWN, HIZ (floating), PULLUP, and
DRIVE_HIGH.
These will be consumed by CODEC/CPU drivers via a common DAI
op, enabling the explicit configuration of bus keepers where
required.
Add properties to describe TDM slot idle behaviour. These properties can
be used to describe how a DAI is supposed to behave when not active.
For example, Apple Silicon laptops split a single I2S bus between two
physical lines which are combined at an OR gate in front of the
receiving port. One codec on each line is expected to transmit zeroes
during the active TDM slots of the opposite line, or we will have corrupted
data at the receiver.
Mark Brown [Mon, 16 Mar 2026 01:11:23 +0000 (01:11 +0000)]
ASoC: amd: Move to GPIO descriptors
Linus Walleij <linusw@kernel.org> says:
After a quick look and test-compile I can determine that
all of these drivers include <linux/gpio.h> for no reason
whatsoever, so fixing it is low hanging fruit.
Charles Keepax [Fri, 13 Mar 2026 16:08:58 +0000 (16:08 +0000)]
ASoC: sdw_utils: Add codec_info for cs42l49
The cs42l49 is an audio codec with integrated MIPI SoundWire interface
(Version 1.2.1 compliant) with SDCA v1.0 support, I2C, and I2S/TDM
interfaces designed for portable applications.
Charles Keepax [Fri, 13 Mar 2026 16:08:57 +0000 (16:08 +0000)]
ASoC: SDCA: Add support for the Cirrus Logic cs42l49
The cs42l49 is an audio codec with integrated MIPI SoundWire interface
(Version 1.2.1 compliant) with SDCA v1.0 support, I2C, and I2S/TDM
interfaces designed for portable applications.
Linus Torvalds [Sun, 15 Mar 2026 20:15:39 +0000 (13:15 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The one core change is a re-roll of the tag allocation fix from the
last pull request that uses the correct goto to unroll all the
allocations. The remianing fixes are all small ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix NULL pointer exception during user_scan()
scsi: qla2xxx: Completely fix fcport double free
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
scsi: core: Fix error handling for scsi_alloc_sdev()
Linus Torvalds [Sun, 15 Mar 2026 20:08:05 +0000 (13:08 -0700)]
Merge tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Avoid crash when rmmod/insmod after ftrace killed
This fixes a kernel crash caused by kprobes on the symbol in a module
which is unloaded after ftrace_kill() is called.
- Remove unneeded warnings from __arm_kprobe_ftrace()
Remove unneeded WARN messages which can be triggered if the kprobe is
using ftrace and it fails to enable the ftrace. Since kprobes
correctly handle such failure, we don't need to warn it.
* tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Remove unneeded warnings from __arm_kprobe_ftrace()
kprobes: avoid crash when rmmod/insmod after ftrace killed
Linus Torvalds [Sun, 15 Mar 2026 19:50:05 +0000 (12:50 -0700)]
Merge tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- fix off-by-one in xbc_verify_tree() unclosed brace error. This fixes
a wrong error place in unclosed brace error message
- check bounds before writing in __xbc_open_brace(). This fixes to
check the array index before setting array, so that the bootconfig
can support 16th-depth nested brace correctly
- fix snprintf truncation check in xbc_node_compose_key_after(). This
fixes to handle the return value of snprintf() correctly in case of
the return value == size
- Add bootconfig tests about braces Add test cases for checking error
position about unclosed brace and ensuring supporting 16th depth
nested braces correctly
* tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Add bootconfig tests about braces
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
lib/bootconfig: check bounds before writing in __xbc_open_brace()
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
Linus Torvalds [Sun, 15 Mar 2026 19:22:10 +0000 (12:22 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Linus Torvalds [Sun, 15 Mar 2026 18:36:11 +0000 (11:36 -0700)]
Merge tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KUAP warning in VMX usercopy path
- Fix lockdep warning during PCI enumeration
- Fix to move CMA reservations to arch_mm_preinit
- Fix to check current->mm is alive before getting user callchain
Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák,
Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar
Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor
Malik.
* tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: fix lockdep warning during PCI enumeration
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
powerpc: fix KUAP warning in VMX usercopy path
powerpc, perf: Check that current->mm is alive before getting user callchain
powerpc/mem: Move CMA reservations to arch_mm_preinit
Linus Torvalds [Sun, 15 Mar 2026 18:26:36 +0000 (11:26 -0700)]
Merge tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Work around S2RAM hang if the firmware unexpectedly re-enables the
x2apic hardware while it was disabled by the kernel.
Force-disable it again and issue a warning into the syslog"
* tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Disable x2apic on resume if the kernel expects so
- Fix CID hangs due to a race between concurrent forks
- Fix vfork()/CLONE_VM MMCID bug causing hangs
- Remove pointless preemption guard
- Fix CID task list walk performance regression on large systems
by removing the known-flaky and slow counting logic using
for_each_process_thread() in mm_cid_*fixup_tasks_to_cpus(), and
implementing a simple sched_mm_cid::node list instead"
* tag 'sched-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Avoid full tasklist walks
sched/mmcid: Remove pointless preempt guard
sched/mmcid: Handle vfork()/CLONE_VM correctly
sched/mmcid: Prevent CID stalls due to concurrent forks
- Fix another objtool stack overflow in validate_branch()
* tag 'objtool-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix another stack overflow in validate_branch()
objtool: Handle Clang RSP musical chairs
objtool: Fix ERROR_INSN() error message
objtool: Fix data alignment in elf_add_data()
objtool: Use HOSTCFLAGS for HAVE_XXHASH test
objtool/klp: Avoid NULL pointer dereference when printing code symbol name
objtool/klp: Disable unsupported pr_debug() usage
objtool/klp: Fix detection of corrupt static branch/call entries
Linus Torvalds [Sun, 15 Mar 2026 17:32:57 +0000 (10:32 -0700)]
Merge tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes for the riscv-aplic irqchip driver:
- Fix probing dependency bug on probing failure
- Fix double register_syscore() bug"
* tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Register syscore operations only once
irqchip/riscv-aplic: Do not clear ACPI dependencies on probe failure
Linus Torvalds [Sat, 14 Mar 2026 23:25:10 +0000 (16:25 -0700)]
Merge tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Alexandre Belloni:
"This introduces the I3C_OR_I2C symbol which is not a fix per se but is
affecting multiple subsystems so it is included to ease
synchronization.
Apart from that, Adrian is mostly fixing the mipi-i3c-hci driver DMA
handling, and I took the opportunity to add two fixes for the dw-i3c
driver.
Drivers:
- dw: handle 2C properly, fix possible race condition
- mipi-i3c-hci: many DMA related fixes"
* tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach
i3c: master: dw-i3c: Fix missing of_node for virtual I2C adapter
i3c: mipi-i3c-hci: Fallback to software reset when bus disable fails
i3c: mipi-i3c-hci: Fix handling of shared IRQs during early initialization
i3c: mipi-i3c-hci: Fix race in DMA error handling in interrupt context
i3c: mipi-i3c-hci: Consolidate common xfer processing logic
i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort
i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
i3c: mipi-i3c-hci: Fix race between DMA ring dequeue and interrupt handler
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
i3c: mipi-i3c-hci: Fix race in DMA ring enqueue for parallel xfers
i3c: mipi-i3c-hci: Consolidate spinlocks
i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path
i3c: mipi-i3c-hci: Fix Hot-Join NACK
i3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errors
i3c: simplify combined i3c/i2c dependencies
Linus Torvalds [Sat, 14 Mar 2026 19:35:16 +0000 (12:35 -0700)]
Merge tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Remap paths to avoid absolute ones starting with the upcoming Rust
1.95.0 release. This improves build reproducibility, avoids leaking
the exact path and avoids having the same path appear in two forms
The approach here avoids remapping debug information as well, in
order to avoid breaking tools that used the paths to access source
files, which was the previous attempt that needed to be reverted
- Allow 'unused_features' lint for the upcoming Rust 1.96.0 release.
While well-intentioned, we do not benefit much from the new lint
- Emit dependency information into '$(depfile)' directly to avoid a
temporary '.d' file (it was an old approach)
'kernel' crate:
- 'str' module: fix warning under '!CONFIG_BLOCK' by making
'NullTerminatedFormatter' public
- Remove '#[disable_initialized_field_access]' attribute which was
unsound. This means removing the support for structs with unaligned
fields (through the 'repr(packed)' attribute), for now
And document the load-bearing fact of field accessors (i.e. that
they are required for soundness)
- Replace shadowed return token by 'unsafe'-to-create token in order
to remain sound in the face of the likely upcoming Type Alias Impl
Trait (TAIT) and the next trait solver in upstream Rust"
* tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: allow `unused_features`
rust: cpufreq: suppress clippy::double_parens in Policy doctest
rust: pin-init: replace shadowed return token by `unsafe`-to-create token
rust: pin-init: internal: init: document load-bearing fact of field accessors
rust: pin-init: internal: init: remove `#[disable_initialized_field_access]`
rust: build: remap path to avoid absolute path
rust: kbuild: emit dep-info into $(depfile) directly
rust: str: make NullTerminatedFormatter public
Linus Torvalds [Sat, 14 Mar 2026 16:33:58 +0000 (09:33 -0700)]
Merge tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 7.0-rc4 that resolve
some reported problems. They are:
- two rtl8723bs data validation bugfixes
- sm750fb removal path bugfix
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
staging: sm750fb: add missing pci_release_region on error and removal
Linus Torvalds [Fri, 13 Mar 2026 22:38:55 +0000 (15:38 -0700)]
Merge tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
Linus Torvalds [Fri, 13 Mar 2026 22:11:05 +0000 (15:11 -0700)]
Merge tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id()
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity
* tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Rename show_cpu_pool{s,}_hog{s,}() to reflect broadened scope
workqueue: Add stall detector sample module
workqueue: Show all busy workers in stall diagnostics
workqueue: Show in-flight work item duration in stall diagnostics
workqueue: Rename pool->watchdog_ts to pool->last_progress_ts
workqueue: Use POOL_BH instead of WQ_BH when checking pool flags
Linus Torvalds [Fri, 13 Mar 2026 22:06:31 +0000 (15:06 -0700)]
Merge tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains
* tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Don't expose dead tasks in cgroup
cgroup/cpuset: Call rebuild_sched_domains() directly in hotplug
Linus Torvalds [Fri, 13 Mar 2026 21:54:56 +0000 (14:54 -0700)]
Merge tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
Linus Torvalds [Fri, 13 Mar 2026 21:18:13 +0000 (14:18 -0700)]
Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
Linus Torvalds [Fri, 13 Mar 2026 21:03:58 +0000 (14:03 -0700)]
Merge tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
Linus Torvalds [Fri, 13 Mar 2026 17:49:15 +0000 (10:49 -0700)]
Merge tag 'xfs-fixes-7.0-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A couple race fixes found on the new healthmon mechanism, and another
flushing dquots during filesystem shutdown"
* tag 'xfs-fixes-7.0-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix integer overflow in bmap intent sort comparator
xfs: fix undersized l_iclog_roundoff values
xfs: ensure dquot item is deleted from AIL only after log shutdown
xfs: remove redundant set null for ip->i_itemp
xfs: fix returned valued from xfs_defer_can_append
xfs: Remove redundant NULL check after __GFP_NOFAIL
xfs: fix race between healthmon unmount and read_iter
xfs: remove scratch field from struct xfs_gc_bio
Linus Torvalds [Fri, 13 Mar 2026 17:46:32 +0000 (10:46 -0700)]
Merge tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix reconnect when using non-default port
- Fix default retransmission behavior
- Fix open handle reuse in cifs_open
- Fix export for smb2-mapperror-test
- Fix potential corruption on write retry
- Fix potentially uninitialized superblock flags
- Fix missing O_DIRECT and O_SYNC flags on create
* tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make default value of retrans as zero
smb: client: fix open handle lookup in cifs_open()
smb: client: fix iface port assignment in parse_server_interfaces
smb/client: only export symbol for 'smb2maperror-test' module
smb: client: fix in-place encryption corruption in SMB2_write()
smb: client: fix sbflags initialization
smb: client: fix atomic open with O_DIRECT & O_SYNC
Linus Torvalds [Fri, 13 Mar 2026 17:31:10 +0000 (10:31 -0700)]
Merge tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of device ID and quirk updates, plus a bunch of small fixes
most of which (other than the Cadence one) are unremarkable error
handling fixes"
* tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atcspi200: Handle invalid buswidth and fix compiler warning
spi: dt-bindings: sun6i: Allow Dual SPI and Quad SPI for newer SoCs
spi: intel-pci: Add support for Nova Lake mobile SPI flash
spi: cadence-qspi: Fix requesting of APB and AHB clocks on JH7110
spi: rockchip-sfc: Fix double-free in remove() callback
spi: atcspi200: Fix double-free in atcspi_configure_dma()
spi: amlogic: spifc-a4: Fix DMA mapping error handling
Linus Torvalds [Fri, 13 Mar 2026 17:29:45 +0000 (10:29 -0700)]
Merge tag 'regulator-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small driver specific fixes for pca9450, cleaning up
logging and fixing warnings due to confusion with interrupt type"
* tag 'regulator-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pca9450: Correct probed name for PCA9452
regulator: pca9450: Correct interrupt type
USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed
Add USB_QUIRK_NO_BOS for ezcap401 capture card, without it dmesg will show
"unable to get BOS descriptor or descriptor too short" and "unable to
read config index 0 descriptor/start: -71" errors and device will not
able to work at full speed at 10gbs
projects / thirdparty / kernel / linux.git / log
