usb: xhci: split core allocation and initialization
Separate allocation and initialization in the xHCI core:
* xhci_mem_init() now only handles memory allocation.
* xhci_init() now only handles initialization.
This split allows xhci_init() to be reused when resuming from S4
suspend-to-disk.
usb: xhci: move initialization for lifetime objects
Initialize objects that exist for the lifetime of the driver only once,
rather than repeatedly. These objects do not require re-initialization
after events such as S4 (suspend-to-disk).
Move ring initialization from xhci_ring_alloc() to xhci_ring_init().
Call xhci_ring_init() after xhci_ring_alloc(); in the future,
it can also be used to re-initialize the ring during resume.
Additionally, remove xhci_dbg_trace() from xhci_mem_init(). The command
ring's first segment DMA address is now printed during the trace call in
xhci_ring_init().
This refactoring lays also the groundwork for eventually replacing:
* xhci_dbc_ring_init()
* xhci_clear_command_ring()
Introduce xhci_rh_bw_cleanup() to release all bandwidth tracking
structures associated with xHCI roothub ports.
The new helper clears:
* TT bandwidth entries
* Per-interval endpoint lists
This refactors and consolidates the existing per-port cleanup logic
previously embedded in xhci_mem_cleanup(), reducing duplication and
making the teardown sequence easier to follow.
The helper will also be reused for upcoming S4 resume handling.
A Restore Error or Host Controller Error indicates that the host controller
failed to resume after suspend. In such cases, the xhci driver is fully
re-initialized, similar to a post-hibernation scenario.
The existing error check is only relevant when 'power_lost' is false.
If 'power_lost' is true, a Restore or Controller error has no effect:
no warning is printed and the 'power_lost' state remains unchanged.
Move the entire error check into the if '!power_lost' condition
to make this dependency explicit and simplify the resume logic.
The function compliance_mode_recovery_timer_init() is called from
xhci_init() because the Compliance Mode Recovery Timer (CMRT) must be set
up before xhci_run() when the xhci driver is re-initialized.
To handle this case, the boolean flag 'comp_timer_running' was introduced
to track whether xhci_run() had already been called, ensuring that
xhci_resume() would not invoke compliance_mode_recovery_timer_init()
a second time.
This can be simplified by moving the 'done' label in xhci_resume() to
after the compliance_mode_recovery_timer_init() call. With this change,
the timer initialization runs only when the xhci driver has not been
re-initialized, making the 'comp_timer_running' flag unnecessary and
allowing it to be removed.
Michal Pecio [Thu, 2 Apr 2026 13:13:20 +0000 (16:13 +0300)]
usb: xhci: Fix debugfs bandwidth reporting
Replace kernel USB speed numbers with xHCI protocol IDs expected by HW.
They are numerically equal up to high speed, but instead of SuperSpeed
we were querying SuperSpeed+.
Gen1 hardware rejects such commands with TRB Error, which resulted in
zero available bandwidth being shown.
While at that, report failures properly. No attempt made at "tunneling"
all possible comp codes through errno, debugfs users may inspect the
result through event-ring/trbs.
Michal Pecio [Thu, 2 Apr 2026 13:13:19 +0000 (16:13 +0300)]
usb: xhci: Simplify clearing the Event Interrupt bit
USBSTS is mostly RW1C, so to clear EINT we should write just this
one bit. Remove pointless code which ORs the bit with current value
of the register, even though the bit is already known to be set,
and writes the result back, which clears all active RW1C flags.
We used to inadvertently clear PCD and SRE in this way. PCD isn't
used by the driver and SRE is only used at resume, so clearing them
should make no difference. Don't clear them anymore.
Tested by connecting and mounting a storage device on a few HCs.
Kelvin Mbogo [Wed, 25 Mar 2026 10:36:40 +0000 (13:36 +0300)]
usb: usbip: fix OOB read/write in usbip_pad_iso()
usbip_pad_iso() repositions ISO frame data within the transfer buffer
via memmove(). Neither the source offset (actualoffset, derived by
subtracting wire-supplied actual_length values) nor the destination
offset (iso_frame_desc[i].offset, taken directly from the wire) is
bounds-checked.
If a crafted actual_length wraps actualoffset negative through the
subtraction (see patch 2/3 for the root cause), the memmove source
points before the allocation - slab OOB read, data returned to
userspace.
Independently, iso_frame_desc[i].offset is never validated against
transfer_buffer_length. Setting offset past the end of the buffer
gives a fully controlled OOB write into whatever sits next in the
slab - confirmed with offset=400 on a 392-byte buffer, 64-byte write.
Add bounds checks for both the source and destination ranges before
each memmove call. Use unsigned comparisons after the sign check on
actualoffset to avoid signed/unsigned conversion surprises.
A malicious server can send actual_length = 0xFFFFFFFC for one frame
and a small value for the other, making the signed sum wrap around to
match urb->actual_length. The sanity check passes, and usbip_pad_iso()
later computes a negative actualoffset, feeding it to memmove() as a
source pointer - reads before the allocation, leaked to userspace via
USBDEVFS_REAPURB.
Reject any frame whose actual_length exceeds transfer_buffer_length
(one frame can't carry more data than the whole buffer), and widen the
accumulator to u32 so that many moderately-large frames can't wrap it
either.
Kelvin Mbogo [Wed, 25 Mar 2026 10:36:38 +0000 (13:36 +0300)]
usb: usbip: fix integer overflow in usbip_recv_iso()
usbip_recv_iso() computes the iso descriptor buffer size as:
int size = np * sizeof(*iso);
where np comes straight from the wire (urb->number_of_packets, set by
usbip_pack_ret_submit() before we get here). With np = 0x10000001 and
sizeof(*iso) == 16 the product is 0x100000010 which truncates to 16 on
a 32-bit int. kzalloc(16) succeeds but the following receive loop
writes np * 16 bytes into it - game over.
USBIP_MAX_ISO_PACKETS (1024) already exists in usbip_common.h for the
submit path but was never enforced on the receive side.
Clamp np to [1, USBIP_MAX_ISO_PACKETS] and switch to kcalloc() so
the allocator itself can catch overflows in the future. Fold the
existing np == 0 early return into the new bounds check.
usbip_pack_ret_submit() already copied the bogus np into
urb->number_of_packets before we run, so just returning -EPROTO is
not enough - processcompl() in the HCD will still iterate that many
iso_frame_desc entries when it completes the failed URB. Zero out
urb->number_of_packets before bailing to prevent that secondary crash
(confirmed on 6.12.0, processcompl+0x63 with CR2 in unmapped slab).
Pawel Laszczak [Tue, 31 Mar 2026 08:19:11 +0000 (10:19 +0200)]
usb: cdnsp: Add support for device-only configuration
This patch introduces support for operating the Cadence USBSSP (cdnsp)
controller in a peripheral-only mode, bypassing the Dual-Role Device (DRD)
logic.
The change in BAR indexing (from BAR 2 to BAR 1) is a direct
consequence of switching from 64-bit to 32-bit addressing in the
Peripheral-only configuration.
Tested on PCI platform with Device-only configuration. Platform-side
changes are included to support the PCI glue layer's property injection.
usb: gadget: f_hid: don't call cdev_init while cdev in use
When calling unbind, then bind again, cdev_init reinitialized the cdev,
even though there may still be references to it. That's the case when
the /dev/hidg* device is still opened. This obviously unsafe behavior
like oopes.
This fixes this by using cdev_alloc to put the cdev on the heap. That
way, we can simply allocate a new one in hidg_bind.
usb: typec: tcpm/tcpci_maxim: deprecate WAR for setting charger mode
TCPCI maxim driver directly writes to the charger's register space to
set charger mode depending on the power role. As MAX77759 chg driver
exists, this WAR is not required.
Instead, use a regulator interface to source vbus when typec is in
source power mode. In other power modes, this regulator will be turned
off if active.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20260325-max77759-charger-v9-6-4486dd297adc@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MAX77759 battery charger driver. This is a 4A 1-Cell
Li+/LiPoly dual input switch mode charger. While the device can support
USB & wireless charger inputs, this implementation only supports USB
input. This implementation supports both buck and boost modes.
Add a helper function to find the selector for a given value in a linear
range array. The selector should be such that the value it represents
should be higher or equal to the given value.
mfd: max77759: add register bitmasks and modify irq configs for charger
Add register bitmasks for charger function.
In addition split the charger IRQs further such that each bit represents
an IRQ downstream of charger regmap irq chip. In addition populate the
ack_base to offload irq ack to the regmap irq chip framework.
dt-bindings: usb: maxim,max33359: Add supply property for vbus
Add a regulator supply property for vbus. This notifies the regulator
provider to source vbus when Type-C operates in Source power mode,
while turn off sourcing vbus when operating in Sink mode or
disconnected.
dt-bindings: mfd: maxim,max77759: reference power-supply schema and add regulator property
Extend the max77759 binding to reference power-supply schema, so that
PMIC node can reference its supplier. Also, add regulator property to
control CHGIN (OTG) voltage.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20260325-max77759-charger-v9-1-4486dd297adc@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Wed, 25 Mar 2026 14:55:20 +0000 (15:55 +0100)]
usb: translate ENOSPC for user space
In case of insufficient bandwidth usb_submit_urb()
returns -ENOSPC. Translating this to -EIO is not
optimal. There are insufficient resources not
an error. EBUSY is a better fit.
Oliver Neukum [Thu, 19 Mar 2026 14:46:23 +0000 (15:46 +0100)]
usb: uapi: add usb 3.0 authentication declarations
This adds the USB authentication extensions to the
uapi chapter 9 declarations, so that user space tools
correctly operate on the descriptor and commands.
This is necessary for sniffing and debugging in gadget
mode to correctly work, even though the kernel
does not use these requests in host mode.
Terminus FE1.1s is USB2.0 protocol compliant 4-port USB HUB, It support
MTT (Multiple Transaction Translator) mode, the upstream port supports
high-speed 480MHz and full-speed 12MHz modes, also it has integrated 5V
to 3.3V/1.8V regulator and Power-On-Reset circuit.
Yixun Lan [Thu, 19 Mar 2026 07:51:03 +0000 (07:51 +0000)]
dt-bindings: usb: Add support for Terminus FE1.1s USB2.0 Hub controller
Terminus FE1.1s is USB2.0 protocol compliant 4-port USB HUB, It support
MTT (Multiple Transaction Translator) mode, the upstream port supports
high-speed 480MHz and full-speed 12MHz modes, also has integrated 5V to
3.3V, 1.8V regulator and Power-On-Reset circuit.
dt-bindings: usb: qcom,snps-dwc3: Add constraints for IPQ5424 and IPQ9574
The qcom,ipq5424-dwc3 and qcom,ipq9574-dwc3 are already documented in
top level part, but they miss specific constraints for clocks (IPQ5424)
and interrupts (both).
dt-bindings: usb: qcom,snps-dwc3: Add constraints for SM4250
The qcom,sm4250-dwc3 is already documented in top level part, but it
misses specific constraints for clocks. The SoC is derivative of SM6115
(or vice versa), so the interrupts part is incorrectly placed and should
be same as for SM6115.
dt-bindings: usb: qcom,snps-dwc3: Add missing clocks and interrupts constraints
The top-level part defines variable number of clocks and interrupts, and
each "if:then:" block narrows them. It however narrows only the
maxItems leaving minItems undefined, which then takes different values
depending on dtschema being used.
Recommended style is to avoid ambiguity in such case, thus if top-level
part has broad constraints, then each "if:then:" must specify both upper
and lower limits.
Add missing constraints, mostly minItems but also maxItems for one
variant.
Peter Chen [Mon, 16 Mar 2026 06:48:31 +0000 (14:48 +0800)]
usb: cdns3: Add USBSSP platform driver support
The Cadence USBSSP (CDNSP) controller was previously only accessible
through PCI, coupling the gadget driver with the PCI glue layer into a
single monolithic module (cdnsp-udc-pci). This prevented using the
CDNSP IP on SoC/platform designs that expose the controller through
device tree. It restructures the driver to decouple the CDNSP gadget
from PCI.
- Introduce CONFIG_USB_CDNSP as a standalone tristate (analogous to
CONFIG_USB_CDNS3), with USB_CDNSP_GADGET and USB_CDNSP_HOST as
bool sub-options. The gadget code builds as a separate cdnsp.ko
module.
- Regroup USBSSP and CDNS3 Kconfig options under the USB_CDNS_SUPPORT
menu so they appear properly grouped in menuconfig.
- Refactor cdnsp-pci.c into a thin PCI-to-platform wrapper (similar
to cdns3-pci-wrap.c) that registers a platform device and passes
PCI resources and platform data to the common platform driver.
- Auto-detect the controller version (USBSS vs USBSSP) at runtime by
reading the DRD/OTG Device ID register in cdns_drd_init(), and select
the appropriate gadget init function (cdns3_gadget_init or
cdnsp_gadget_init) based on cdns->version. This follows the same
pattern already used for host initialization.
- Fix gadget-export.h to use IS_REACHABLE() keyed on the tristate
module config (CONFIG_USB_CDNS3/CONFIG_USB_CDNSP) instead of
IS_ENABLED() on the bool gadget config. The bool configs are always
'y' when enabled, causing IS_ENABLED/IS_REACHABLE to always return
true and resulting in link errors when cdns-usb-common is built-in
but the gadget module is loadable.
- Add missing MODULE_LICENSE()/MODULE_DESCRIPTION() and
EXPORT_SYMBOL_GPL() to the cdns3 and cdnsp gadget modules, required
by modpost.
- Pass override_apb_timeout through cdns3_platform_data so the PCI
wrapper can communicate PCI-specific APB timeout values to the
common driver.
Peter Chen [Mon, 16 Mar 2026 06:48:30 +0000 (14:48 +0800)]
dt-bindings: usb: cdns,usb3: document USBSSP controller support
Update the Cadence USBSS DRD binding to document that it also covers
the USBSSP (SuperSpeed Plus, USB 3.1 gen2x1) controller. Both USBSS
and USBSSP share the same DRD/OTG register interface, so the driver
auto-detects the controller version at runtime — no additional
compatible string is needed.
Changes to the binding:
- Update title and add description
- maximum-speed: add super-speed-plus
Alexey Charkov [Wed, 18 Mar 2026 14:32:56 +0000 (18:32 +0400)]
usb: typec: tcpci_rt1711h: Drop unnecessary VID/PID/DID checks
Existing checks for VID/PID/DID in the driver are redundant since the
driver is already matched to the device via I2C device ID and OF
compatible strings, and they preclude the use of fallback compatibles.
Remove them to make the driver slimmer and adding new clones easier.
Alexey Charkov [Wed, 18 Mar 2026 14:32:54 +0000 (18:32 +0400)]
dt-bindings: usb: richtek,rt1711h: Switch ETEK ET7304 to use a fallback compatible
As stated in [1], ETEK ET7304 is identical to Richtek RT1715, except for
the VID value in its registers, so reflect it in the bindings via a
fallback compatible.
As there are various TCPCI chips by different vendors reimplementing the
registers and behavior of the RT1711H/RT1715, fallback compatibles will
scale better.
Chukun Pan [Thu, 26 Mar 2026 10:00:10 +0000 (18:00 +0800)]
usb: dwc3: Add optional VBUS regulator support to SpacemiT K1
Some SpacemiT K1 boards (like OrangePi R2S) provide USB VBUS
through a controllable regulator. Add support for the optional
vbus-supply property so the regulator can be properly managed
in host mode instead of left always-on. Note that this doesn't
apply to USB Hub downstream ports with different VBUS supplies.
The enabled and disabled actions of the regulator are handled
automatically by devm_regulator_get_enable_optional().
Yixun Lan [Fri, 20 Mar 2026 07:15:37 +0000 (07:15 +0000)]
dt-bindings: usb: dwc3: spacemit: add support for K3 SoC
Add compatible string for DWC3 USB controller found in SpacemiT K3 SoC.
The USB2.0 host controller in K3 SoC actually use DWC3 IP but only support
USB2.0 functionality, thus in the hardware layer, it has only one USB2 PHY.
While in K1 SoC, the USB controller has both USB2 and USB3 Combo PHY
connected, but able to work in a reduced USB2.0 mode which requres only
one USB2 PHY, leaves the USB3 Combo PHY to PCIe controller. So both K1
and K3 SoC are able to work in the USB2.0 mode which requires one PHY.
Explicitly reduce number of phy property to minimal one.
Kexin Sun [Sat, 21 Mar 2026 11:00:06 +0000 (19:00 +0800)]
usb: gadget: udc: update outdated comment for renamed usb_gadget_udc_start()
The function usb_gadget_udc_start() was renamed to
usb_gadget_udc_start_locked() by commit 286d9975a838 ("usb: gadget:
udc: core: Prevent soft_connect_store() race"). Update the comment
in usb_gadget_udc_set_speed() accordingly.
Xu Yang [Thu, 19 Mar 2026 09:48:49 +0000 (17:48 +0800)]
usb: typec: tcpci: support setting orientation via GPIO
If the chip indicates its "Connection Orientation" standard output control
in STANDARD_OUTPUT_CAPABILITIES register, it can do the thing by
programming CONFIG_STANDARD_OUTPUT register. Due to the optional feature,
the chip which not present this capability currently doesn't have a way to
correctly set the data path. This add the support to set orientation via
a simple GPIO.
The Type-C chip know the cable orientation and then normally will set the
switch channel to correctly configure the data path. Some chips itself
support to output the control signal by indicating the capability in
bit[0] of STANDARD_OUTPUT_CAPABILITIES register and do it in
CONFIG_STANDARD_OUTPUT register. For PTN5110 which doesn't present this
capability currently there is no way to achieve the orientation setting.
Add an optional "orientation-gpios" property to achieve the same purpose.
Alexander Stein [Fri, 13 Mar 2026 14:12:19 +0000 (15:12 +0100)]
dt-bindings: usb: ti,usb8041: Support nested USB hubs
Onboard USB hubs might be nested. Add the reference for the generic
usb-hub.yaml binding and lift the restriction on peer-hub.
A (downstream) hub might only be connected on USB High-Speed lines.
Abel Vesa [Wed, 18 Mar 2026 08:13:22 +0000 (10:13 +0200)]
dt-bindings: usb: qcom,snps-dwc3: Document the Eliza compatible
Document the compatible for the Qualcomm Synopsys DWC3 glue controller
found on Eliza SoC.
It follows the same binding requirements as other recent Qualcomm
SoCs, so add it to the existing schema conditionals covering the
required properties.
Pengpeng Hou [Mon, 23 Mar 2026 12:17:30 +0000 (20:17 +0800)]
usb: gadget: bdc: validate status-report endpoint indices
bdc_sr_xsf() decodes a 5-bit endpoint number from the hardware status
report and uses it to index bdc->bdc_ep_array[] directly. The array is
only allocated to bdc->num_eps for the current controller instance, so a
status report can carry an endpoint number that still fits the 5-bit
field but does not fit the runtime-sized endpoint table.
Reject status reports whose endpoint number is outside bdc->num_eps
before indexing the endpoint array.
If a runtime suspend is executed followed by a system suspend, the driver
may invoke dwc3_imx_suspend() twice, which causes enable_irq() to be
called twice as well. This leads to an unbalanced IRQ state and may
trigger warnings or malfunction. Prevent this by checking the pm_suspended
flag before running the imx suspend/resume path.
Fixes: 76fc9452a6bf ("usb: dwc3: introduce flatten model driver of i.MX Soc") Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://patch.msgid.link/20260317030546.1665206-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcpm: Implement sink support for PD SPR AVS negotiation
Add support to enable TCPM to negotiate with
USB PD Standard Power Range Adjustable Voltage Supply (SPR AVS) when
acting as a power sink.
* Added support to the tcpm power supply properties, allowing userspace
to enable and control the dynamic limits (voltage and current)
specific to the SPR AVS contract.
* Implemented tcpm_pd_select_spr_avs_apdo() to select the appropriate
APDO and validate the requested voltage/current against both the
Source and Sink capabilities.
* Implemented tcpm_pd_build_spr_avs_request() to construct the
Request Data Object (RDO) for SPR AVS.
* Added SNK_NEGOTIATE_SPR_AVS_CAPABILITIES state to the state machine to
handle negotiation for SPR AVS.
* Updated the SNK_TRANSITION_SINK state to implement the SPR
AVS-specific VBUS transition rules, including reducing current draw to
PD_I_SNK_STBY_MA for large voltage changes, as required by USB PD spec.
power: supply: Add PD SPR AVS support to USB type enum
Add two new members to the power_supply_usb_type to represent the
USB Power Delivery (PD) Standard Power Range (SPR) Adjustable Voltage
Supply (AVS) charging types:
POWER_SUPPLY_USB_TYPE_PD_SPR_AVS: For devices supporting only the
PD SPR AVS type.
POWER_SUPPLY_USB_TYPE_PD_PPS_SPR_AVS: For devices that support both
PD Programmable Power Supply (PPS) and PD SPR AVS.
USB Power Delivery 3.2 introduces a new power supply type SPR AVS.
Add macro definitions for the USB Power Delivery (PD)
Standard Power Range (SPR) Adjustable Voltage Supply (AVS) as a
Sink Augmented Power Data Object (APDO) in the device tree bindings.
Aldo Conte [Wed, 11 Mar 2026 16:33:20 +0000 (17:33 +0100)]
usb: typec: Document priority and mode_selection fields in struct typec_altmode
The fields 'priority' and 'mode_selection' in struct typec_altmode are
missing from the kernel-doc comment, which results in warnings when
building the documentation with 'make htmldocs'.
WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'priority' not described in 'typec_altmode'
WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'mode_selection' not described in 'typec_altmode'
Document both fields to keep the kernel-doc comment aligned with the
structure definition.
Static structure "ti_tusb8041_data" is exactly the same as
"ti_tusb8020b_data" and "cypress_hx2vl_data" is the same as
"microchip_usb424_data". Drop the duplicated structures to reduce
driver size and memory usage without affecting functionality.
That's because the ps883x_retimer_remove() retrieves the driver data
from i2c_get_clientdata() which was never set at probe. So, add
i2c_set_clientdata() at the end of the probe.
Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer") Link: https://patch.msgid.link/20260313155534.1916773-1-smostafa@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xu Yang [Mon, 16 Mar 2026 09:50:42 +0000 (17:50 +0800)]
usb: port: add delay after usb_hub_set_port_power()
When a port is disabled, an attached device will be disconnected. This
causes a port-status-change event, which will race with hub autosuspend
(if the disabled port was the only connected port on its hub), causing
an immediate resume and a second autosuspend. Both of these can be
avoided by adding a short delay after the call to
usb_hub_set_port_power().
Below log shows what is happening:
$ echo 1 > usb1-port1/disable
[ 37.958239] usb 1-1: USB disconnect, device number 2
[ 37.964101] usb 1-1: unregistering device
[ 37.970070] hub 1-0:1.0: hub_suspend
[ 37.971305] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 37.974412] usb usb1: bus auto-suspend, wakeup 1
[ 37.988175] usb usb1: suspend raced with wakeup event <---
[ 37.993947] usb usb1: usb auto-resume
[ 37.998401] hub 1-0:1.0: hub_resume
[ 38.105688] usb usb1-port1: status 0000, change 0000, 12 Mb/s
[ 38.112399] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 38.118645] hub 1-0:1.0: hub_suspend
[ 38.122963] usb usb1: bus auto-suspend, wakeup 1
[ 38.200368] usb usb1: usb wakeup-resume
[ 38.204982] usb usb1: usb auto-resume
[ 38.209376] hub 1-0:1.0: hub_resume
[ 38.213676] usb usb1-port1: status 0101 change 0001
[ 38.321552] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 38.327978] usb usb1-port1: status 0101, change 0000, 12 Mb/s
[ 38.457429] usb 1-1: new high-speed USB device number 3 using ci_hdrc
Then, port change bit will be fixed to the final state and
usb_clear_port_feature() can correctly clear it after this period. This
will also avoid usb runtime suspend routine to run because
usb_autopm_put_interface() not run yet.
Fixes: f061f43d7418 ("usb: hub: port: add sysfs entry to switch port power") Cc: stable@kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://patch.msgid.link/20260316095042.1559882-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Rhodes [Sun, 15 Mar 2026 22:34:33 +0000 (22:34 +0000)]
usb: core: allow ACPI-managed hard-wired ports to power off
USB core only relaxes the default PM_QOS_FLAG_NO_POWER_OFF policy when
an upstream hub reports switchable port power. That misses internal
ports whose power is managed by platform firmware instead of the USB
hub descriptor.
Allow the port-poweroff policy to be exposed for hard-wired ports with
an ACPI-managed power resource. The existing runtime PM path still
requires the child usage count to drop and remote wakeup to be clear
before it will power the port down.
This lets internal devices such as CNVi Bluetooth use the existing USB
ACPI runtime power path even when the root hub reports no USB-standard
port power switching.
Bence Csókás [Sun, 15 Mar 2026 11:24:44 +0000 (12:24 +0100)]
USB: core: Use krealloc() in usb_cache_string()
Instead of "shrinking" the allocation by kmalloc()ing a new, smaller
buffer, utilize krealloc() to shrink the existing allocation. This saves
a memcpy(), as well as eliminates the temporary `smallbuf` allocation,
which guards against allocation failure under extreme memory pressure.
Alexey Charkov [Wed, 11 Mar 2026 15:20:23 +0000 (19:20 +0400)]
usb: misc: onboard_usb_dev: Add Corechips SL6341 USB 2.0/3.0 hub
Add the ID entries and platform data for the Corechips SL6341 onboard
USB 2.0/3.0 hub controller, which requires a reset pin and a power supply
for proper operation.
Corechips SL6341 is a 4-port low-power USB 3.2 Gen 1x1 hub controller
supporting SS, HS, FS and LS connections and integrating a 5V to 3.3V
built-in LDO to enable its IO to be powered directly from the 5V USB VBUS.
External 1v1 VDD supply is still required for its core power.
Zhaoyang Yu [Thu, 12 Mar 2026 11:03:29 +0000 (11:03 +0000)]
USB: pxa27x_udc: check return value of clk_enable
clk_enable() may fail according to the API contract.
Previously, udc_enable() ignored its return value and returned void.
Modify udc_enable() to return the error code. Additionally, update
all of its callers (pxa_udc_pullup, pxa_udc_vbus_session,
pxa27x_udc_start, pxa_udc_probe, and pxa_udc_resume) to check
this return value and handle the failure properly with necessary
cleanups or rollbacks.
Krishna Kurapati [Thu, 12 Mar 2026 10:14:31 +0000 (15:44 +0530)]
usb: typec: ucsi: Add UCSI_USB4_IMPLIES_USB quirk for X1E80100
On X1E80100, when we connect a USB4 capable dock, the PARTNER_FLAGS
indicate USB4_GEN3 being set whilst keeping the PARTNER_FLAGS_USB
cleared. Due to this, during ucsi_partner_change call, the usb role
is marked as ROLE_NONE and passed to DWC3 controller the same way.
Fix this by adding UCSI_USB4_IMPLIES_USB quirk and check for it to
decide and pass on proper ROLE information to DWC3 layer.
Oliver Neukum [Thu, 12 Mar 2026 09:45:28 +0000 (10:45 +0100)]
iowarrior: use interruptible lock in iowarrior_write()
The function itself, if it has to wait to perform
IO, use interruptible sleep. Hence the sleep needed
to avoid the write code path racing with itself should also
use interruptible sleep.
Oliver Neukum [Thu, 12 Mar 2026 09:45:27 +0000 (10:45 +0100)]
usb: iowarrior: remove inherent race with minor number
The driver saves the minor number it gets upon registration
in its descriptor for debugging purposes. However, there is
inevitably a window between registration and saving the correct
minor in a descriptor. During this window the debugging output
will be wrong.
As wrong debug output is worse than no debug output, just
remove it.
Oliver Neukum [Thu, 12 Mar 2026 12:34:27 +0000 (13:34 +0100)]
USB: uas: give the error handler the correct name
A UAS device can in principle contain multiple busses.
A reset on the USB level will reset them all. We
cannot reset a single bus.
In practical terms this does not matter, as only
one method of reset is implemented, but we should
not lie.
Johan Hovold [Thu, 5 Mar 2026 13:38:51 +0000 (14:38 +0100)]
USB: usbip: drop redundant device reference
Driver core holds a reference to the USB device while it is bound to a
driver and there is no need to take additional references unless the
structure is needed after disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Johan Hovold [Thu, 5 Mar 2026 13:38:50 +0000 (14:38 +0100)]
USB: apple-mfi-fastcharge: drop redundant device reference
Driver core holds a reference to the USB device while it is bound to a
driver and there is no need to take additional references unless the
structure is needed after disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Linus Torvalds [Sun, 15 Mar 2026 20:15:39 +0000 (13:15 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The one core change is a re-roll of the tag allocation fix from the
last pull request that uses the correct goto to unroll all the
allocations. The remianing fixes are all small ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix NULL pointer exception during user_scan()
scsi: qla2xxx: Completely fix fcport double free
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
scsi: core: Fix error handling for scsi_alloc_sdev()
Linus Torvalds [Sun, 15 Mar 2026 20:08:05 +0000 (13:08 -0700)]
Merge tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Avoid crash when rmmod/insmod after ftrace killed
This fixes a kernel crash caused by kprobes on the symbol in a module
which is unloaded after ftrace_kill() is called.
- Remove unneeded warnings from __arm_kprobe_ftrace()
Remove unneeded WARN messages which can be triggered if the kprobe is
using ftrace and it fails to enable the ftrace. Since kprobes
correctly handle such failure, we don't need to warn it.
* tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Remove unneeded warnings from __arm_kprobe_ftrace()
kprobes: avoid crash when rmmod/insmod after ftrace killed
Linus Torvalds [Sun, 15 Mar 2026 19:50:05 +0000 (12:50 -0700)]
Merge tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- fix off-by-one in xbc_verify_tree() unclosed brace error. This fixes
a wrong error place in unclosed brace error message
- check bounds before writing in __xbc_open_brace(). This fixes to
check the array index before setting array, so that the bootconfig
can support 16th-depth nested brace correctly
- fix snprintf truncation check in xbc_node_compose_key_after(). This
fixes to handle the return value of snprintf() correctly in case of
the return value == size
- Add bootconfig tests about braces Add test cases for checking error
position about unclosed brace and ensuring supporting 16th depth
nested braces correctly
* tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Add bootconfig tests about braces
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
lib/bootconfig: check bounds before writing in __xbc_open_brace()
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
Linus Torvalds [Sun, 15 Mar 2026 19:22:10 +0000 (12:22 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Linus Torvalds [Sun, 15 Mar 2026 18:36:11 +0000 (11:36 -0700)]
Merge tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KUAP warning in VMX usercopy path
- Fix lockdep warning during PCI enumeration
- Fix to move CMA reservations to arch_mm_preinit
- Fix to check current->mm is alive before getting user callchain
Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák,
Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar
Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor
Malik.
* tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: fix lockdep warning during PCI enumeration
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
powerpc: fix KUAP warning in VMX usercopy path
powerpc, perf: Check that current->mm is alive before getting user callchain
powerpc/mem: Move CMA reservations to arch_mm_preinit
Linus Torvalds [Sun, 15 Mar 2026 18:26:36 +0000 (11:26 -0700)]
Merge tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Work around S2RAM hang if the firmware unexpectedly re-enables the
x2apic hardware while it was disabled by the kernel.
Force-disable it again and issue a warning into the syslog"
* tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Disable x2apic on resume if the kernel expects so
- Fix CID hangs due to a race between concurrent forks
- Fix vfork()/CLONE_VM MMCID bug causing hangs
- Remove pointless preemption guard
- Fix CID task list walk performance regression on large systems
by removing the known-flaky and slow counting logic using
for_each_process_thread() in mm_cid_*fixup_tasks_to_cpus(), and
implementing a simple sched_mm_cid::node list instead"
* tag 'sched-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Avoid full tasklist walks
sched/mmcid: Remove pointless preempt guard
sched/mmcid: Handle vfork()/CLONE_VM correctly
sched/mmcid: Prevent CID stalls due to concurrent forks
- Fix another objtool stack overflow in validate_branch()
* tag 'objtool-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix another stack overflow in validate_branch()
objtool: Handle Clang RSP musical chairs
objtool: Fix ERROR_INSN() error message
objtool: Fix data alignment in elf_add_data()
objtool: Use HOSTCFLAGS for HAVE_XXHASH test
objtool/klp: Avoid NULL pointer dereference when printing code symbol name
objtool/klp: Disable unsupported pr_debug() usage
objtool/klp: Fix detection of corrupt static branch/call entries
Linus Torvalds [Sun, 15 Mar 2026 17:32:57 +0000 (10:32 -0700)]
Merge tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes for the riscv-aplic irqchip driver:
- Fix probing dependency bug on probing failure
- Fix double register_syscore() bug"
* tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Register syscore operations only once
irqchip/riscv-aplic: Do not clear ACPI dependencies on probe failure
Linus Torvalds [Sat, 14 Mar 2026 23:25:10 +0000 (16:25 -0700)]
Merge tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Alexandre Belloni:
"This introduces the I3C_OR_I2C symbol which is not a fix per se but is
affecting multiple subsystems so it is included to ease
synchronization.
Apart from that, Adrian is mostly fixing the mipi-i3c-hci driver DMA
handling, and I took the opportunity to add two fixes for the dw-i3c
driver.
Drivers:
- dw: handle 2C properly, fix possible race condition
- mipi-i3c-hci: many DMA related fixes"
* tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach
i3c: master: dw-i3c: Fix missing of_node for virtual I2C adapter
i3c: mipi-i3c-hci: Fallback to software reset when bus disable fails
i3c: mipi-i3c-hci: Fix handling of shared IRQs during early initialization
i3c: mipi-i3c-hci: Fix race in DMA error handling in interrupt context
i3c: mipi-i3c-hci: Consolidate common xfer processing logic
i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort
i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
i3c: mipi-i3c-hci: Fix race between DMA ring dequeue and interrupt handler
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
i3c: mipi-i3c-hci: Fix race in DMA ring enqueue for parallel xfers
i3c: mipi-i3c-hci: Consolidate spinlocks
i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path
i3c: mipi-i3c-hci: Fix Hot-Join NACK
i3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errors
i3c: simplify combined i3c/i2c dependencies
Linus Torvalds [Sat, 14 Mar 2026 19:35:16 +0000 (12:35 -0700)]
Merge tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Remap paths to avoid absolute ones starting with the upcoming Rust
1.95.0 release. This improves build reproducibility, avoids leaking
the exact path and avoids having the same path appear in two forms
The approach here avoids remapping debug information as well, in
order to avoid breaking tools that used the paths to access source
files, which was the previous attempt that needed to be reverted
- Allow 'unused_features' lint for the upcoming Rust 1.96.0 release.
While well-intentioned, we do not benefit much from the new lint
- Emit dependency information into '$(depfile)' directly to avoid a
temporary '.d' file (it was an old approach)
'kernel' crate:
- 'str' module: fix warning under '!CONFIG_BLOCK' by making
'NullTerminatedFormatter' public
- Remove '#[disable_initialized_field_access]' attribute which was
unsound. This means removing the support for structs with unaligned
fields (through the 'repr(packed)' attribute), for now
And document the load-bearing fact of field accessors (i.e. that
they are required for soundness)
- Replace shadowed return token by 'unsafe'-to-create token in order
to remain sound in the face of the likely upcoming Type Alias Impl
Trait (TAIT) and the next trait solver in upstream Rust"
* tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: allow `unused_features`
rust: cpufreq: suppress clippy::double_parens in Policy doctest
rust: pin-init: replace shadowed return token by `unsafe`-to-create token
rust: pin-init: internal: init: document load-bearing fact of field accessors
rust: pin-init: internal: init: remove `#[disable_initialized_field_access]`
rust: build: remap path to avoid absolute path
rust: kbuild: emit dep-info into $(depfile) directly
rust: str: make NullTerminatedFormatter public
Linus Torvalds [Sat, 14 Mar 2026 16:33:58 +0000 (09:33 -0700)]
Merge tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 7.0-rc4 that resolve
some reported problems. They are:
- two rtl8723bs data validation bugfixes
- sm750fb removal path bugfix
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
staging: sm750fb: add missing pci_release_region on error and removal
Linus Torvalds [Fri, 13 Mar 2026 22:38:55 +0000 (15:38 -0700)]
Merge tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
Linus Torvalds [Fri, 13 Mar 2026 22:11:05 +0000 (15:11 -0700)]
Merge tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id()
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity
* tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Rename show_cpu_pool{s,}_hog{s,}() to reflect broadened scope
workqueue: Add stall detector sample module
workqueue: Show all busy workers in stall diagnostics
workqueue: Show in-flight work item duration in stall diagnostics
workqueue: Rename pool->watchdog_ts to pool->last_progress_ts
workqueue: Use POOL_BH instead of WQ_BH when checking pool flags
Linus Torvalds [Fri, 13 Mar 2026 22:06:31 +0000 (15:06 -0700)]
Merge tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains
* tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Don't expose dead tasks in cgroup
cgroup/cpuset: Call rebuild_sched_domains() directly in hotplug
Linus Torvalds [Fri, 13 Mar 2026 21:54:56 +0000 (14:54 -0700)]
Merge tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
Linus Torvalds [Fri, 13 Mar 2026 21:18:13 +0000 (14:18 -0700)]
Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
Linus Torvalds [Fri, 13 Mar 2026 21:03:58 +0000 (14:03 -0700)]
Merge tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
projects / thirdparty / kernel / linux.git / log
