ALSA: usb-audio: Exclude Scarlett 2i2 1st Gen from SKIP_IFACE_SETUP
The Focusrite Scarlett 2i2 1st Gen (1235:8006) produces
distorted/silent audio when QUIRK_FLAG_SKIP_IFACE_SETUP is active, as
that flag causes the feedback format to be detected as 17.15 instead
of 16.16.
Add a DEVICE_FLG entry for this device before the Focusrite VENDOR_FLG
entry so that it gets no quirk flags, overriding the vendor-wide
SKIP_IFACE_SETUP. This device doesn't have the internal mixer, Air, or
Safe modes that the quirk was designed to protect.
ALSA: firewire-lib: fix uninitialized local variable
Similar to commit d8dc8720468a ("ALSA: firewire-lib: fix uninitialized
local variable"), the local variable `curr_cycle_time` in
process_rx_packets() is declared without initialization.
When the tracepoint event is not probed, the variable may appear to be
used without being initialized. In practice the value is only relevant
when the tracepoint is enabled, however initializing it avoids potential
use of an uninitialized value and improves code safety.
Zhang Heng [Mon, 16 Mar 2026 02:28:43 +0000 (10:28 +0800)]
ALSA: hda/realtek: add quirk for ASUS Strix G16 G615JMR
The machine is equipped with ALC294 and requires the
ALC287_FIXUP_TXNW2781_I2C_ASUS quirk for the amplifier to work properly.
Since the machine's PCI SSID is also 1043:1204, HDA_CODEC_QUIRK is
used to retain the previous quirk.
Sean Rhodes [Sun, 15 Mar 2026 20:11:27 +0000 (20:11 +0000)]
ALSA: hda/realtek: Sequence GPIO2 on Star Labs StarFighter
The initial StarFighter quirk fixed the runtime suspend pop by muting
speakers in the shutup callback before power-down. Further hardware
validation showed that the speaker path is controlled directly by LINE2
EAPD on NID 0x1b together with GPIO2 for the external amplifier.
Replace the shutup-delay workaround with explicit sequencing of those
controls at playback start and stop:
- assert LINE2 EAPD and drive GPIO2 high on PREPARE
- deassert LINE2 EAPD and drive GPIO2 low on CLEANUP
This avoids the runtime suspend pop without a sleep, and also fixes pops
around G3 entry and display-manager start that the original workaround
did not cover.
Fixes: 1cb3c20688fc ("ALSA: hda/realtek: Fix speaker pop on Star Labs StarFighter") Tested-by: Sean Rhodes <sean@starlabs.systems> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Link: https://patch.msgid.link/20260315201127.33744-1-sean@starlabs.systems Signed-off-by: Takashi Iwai <tiwai@suse.de>
Andrii Kovalchuk [Sun, 15 Mar 2026 01:08:51 +0000 (01:08 +0000)]
ALSA: hda/realtek: Add HP ENVY Laptop 13-ba0xxx quirk
Add a PCI quirk for HP ENVY Laptop 13-ba0xxx (PCI device ID 0x8756)
to enable proper mute LED and mic mute behavior using the
ALC245_FIXUP_HP_X360_MUTE_LEDS fixup.
Zhang Heng [Fri, 13 Mar 2026 08:06:24 +0000 (16:06 +0800)]
ALSA: hda/realtek: add quirk for Lenovo Yoga 7 2-in-1 16AKP10
This machine is equipped with ALC287 and requires the quirk
ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN to fix the issue
where the bass speakers are not configured and the speaker
volume cannot be controlled.
Takashi Iwai [Thu, 12 Mar 2026 11:59:28 +0000 (12:59 +0100)]
Merge tag 'asoc-fix-v7.0-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
Quite a large pull request, but nothing too concerning here - everything
is fairly small. We've got a couple of smaller core fixes for races on
card teardown from Matteo Cotifava, a fix for handling dodgy DMI
information generated by u-boot, some driver specific fixes and some new
device IDs for Tegra.
Chen Ni [Tue, 10 Mar 2026 04:43:27 +0000 (12:43 +0800)]
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition.
Fixes: 8b7256266848 ("ASoC: amd: acp: Add support for RT5682-VS codec") Fixes: d4c750f2c7d4 ("ASoC: amd: acp: Add generic machine driver support for ACP cards") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://patch.msgid.link/20260310044327.2582018-1-nichen@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org>
Casey Connolly [Fri, 6 Mar 2026 17:47:07 +0000 (18:47 +0100)]
ASoC: detect empty DMI strings
Some bootloaders like recent versions of U-Boot may install some DMI
properties with empty values rather than not populate them. This manages
to make its way through the validator and cleanup resulting in a rogue
hyphen being appended to the card longname.
Lianqin Hu [Wed, 11 Mar 2026 07:22:38 +0000 (07:22 +0000)]
ALSA: usb-audio: Add iface reset and delay quirk for SPACETOUCH USB Audio
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0666, idProduct=0880
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Audio
usb 1-1: Manufacturer: SPACETOUCH
usb 1-1: SerialNumber: 000000000
Peter Ujfalusi [Tue, 10 Mar 2026 06:53:50 +0000 (08:53 +0200)]
ASoC: codecs: rt1011: Use component to get the dapm context in spk_mode_put
The correct helper to use in rt1011_recv_spk_mode_put() to retrieve the
DAPM context is snd_soc_component_to_dapm(), from kcontrol we will
receive NULL pointer.
Closes: https://github.com/thesofproject/linux/issues/5691 Fixes: 5b35bb517f27 ("ASoC: codecs: rt1011: convert to snd_soc_dapm_xxx()") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20260310065350.18921-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 9 Mar 2026 10:46:27 +0000 (11:46 +0100)]
ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces
The Scarlett2 mixer quirk in USB-audio driver may hit a NULL
dereference when a malformed USB descriptor is passed, since it
assumes the presence of an endpoint in the parsed interface in
scarlett2_find_fc_interface(), as reported by fuzzer.
For avoiding the NULL dereference, just add the sanity check of
bNumEndpoints and skip the invalid interface.
Sen Wang [Mon, 9 Mar 2026 04:21:09 +0000 (23:21 -0500)]
ASoC: simple-card-utils: fix graph_util_is_ports0() for DT overlays
graph_util_is_ports0() identifies DPCM front-end (ports@0) vs back-end
(ports@1) by calling of_get_child_by_name() to find the first "ports"
child and comparing pointers. This relies on child iteration order
matching DTS source order.
When the DPCM topology comes from a DT overlay, __of_attach_node()
inserts new children at the head of the sibling list, reversing the
order. of_get_child_by_name() then returns ports@1 instead of ports@0,
causing all front-end links to be classified as back-ends. The card
registers with no PCM devices.
Fix this by matching the unit address directly from the node name
instead of relying on sibling order.
Fixes: 92939252458f ("ASoC: simple-card-utils: add asoc_graph_is_ports0()") Signed-off-by: Sen Wang <sen@ti.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260309042109.2576612-1-sen@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 10 Mar 2026 00:57:27 +0000 (00:57 +0000)]
ASoC: tegra: Add Tegra238 sound card support
Merge series from "Sheetal ." <sheetal@nvidia.com>:
Add Tegra238 sound card support in the Tegra audio graph card driver,
as Tegra238 requires different PLLA and PLLA_OUT0 clock rates compared
to other Tegra platforms.
matteo.cotifava [Mon, 9 Mar 2026 21:54:12 +0000 (22:54 +0100)]
ASoC: soc-core: flush delayed work before removing DAIs and widgets
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses).
matteo.cotifava [Mon, 9 Mar 2026 21:54:11 +0000 (22:54 +0100)]
ASoC: soc-core: drop delayed_work_pending() check before flush
The delayed_work_pending() check before flush_delayed_work() in
soc_free_pcm_runtime() is unnecessary and racy. flush_delayed_work()
is safe to call unconditionally - it is a no-op when no work is
pending. Remove the check.
The original check was added by commit 9c9b65203492 ("ASoC: core:
only flush inited work during free") but delayed_work_pending()
followed by flush_delayed_work() has a time-of-check/time-of-use
window where work can become pending between the two calls.
Sheetal [Tue, 3 Mar 2026 10:02:49 +0000 (15:32 +0530)]
ASoC: tegra: Add support for Tegra238 soundcard
Tegra238 platforms use different clock rates for plla and
plla_out0 clocks. Add Tegra238 support in the Tegra
sound card driver to apply specific clock configurations.
Uzair Mughal [Sat, 7 Mar 2026 01:29:06 +0000 (06:29 +0500)]
ALSA: hda/realtek: Add headset jack quirk for Thinkpad X390
The Lenovo ThinkPad X390 (ALC257 codec, subsystem ID 0x17aa2288)
does not report headset button press events. Headphone insertion is
detected (SW_HEADPHONE_INSERT), but pressing the inline microphone
button on a headset produces no input events.
Add a SND_PCI_QUIRK entry that maps this subsystem ID to
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK, which enables
headset jack button detection through alc_fixup_headset_jack()
and ThinkPad ACPI integration. This is the same fixup used by
similar ThinkPad models (P1 Gen 3, X1 Extreme Gen 3).
Liucheng Lu [Sat, 7 Mar 2026 03:27:27 +0000 (11:27 +0800)]
ALSA: hda/realtek: add HP Laptop 14s-dr5xxx mute LED quirk
HP Laptop 14s-dr5xxx with ALC236 codec does not handle the toggling of
the mute LED.
This patch adds a quirk entry for subsystem ID 0x8a1f using
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2 fixup, enabling correct mute LED
behavior.
Zhang Heng [Fri, 6 Mar 2026 12:33:17 +0000 (20:33 +0800)]
ALSA: hda/realtek: add quirk for ASUS UM6702RC
The sound card of this machine cannot adjust the volume, it can only
be 0 or 100%. The reason is that the DAC with pin 0x17 is connected
to 0x06. Testing found that connecting 0x02 can fix this problem.
Mehul Rao [Thu, 5 Mar 2026 19:35:07 +0000 (14:35 -0500)]
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released.
firmware: cs_dsp: Fix fragmentation regression in firmware download
Use vmalloc() instead of kmalloc(..., GFP_DMA) to alloc the temporary
buffer for firmware download blobs. This avoids the problem that a
heavily fragmented system cannot allocate enough physically-contiguous
memory for a large blob.
The redundant alloc buffer mechanism was removed in commit 900baa6e7bb0
("firmware: cs_dsp: Remove redundant download buffer allocator").
While doing that I was overly focused on the possibility of the
underlying bus requiring DMA-safe memory. So I used GFP_DMA kmalloc()s.
I failed to notice that the code I was removing used vmalloc().
This creates a regression.
Way back in 2014 the problem of fragmentation with kmalloc()s was fixed
by commit cdcd7f728753 ("ASoC: wm_adsp: Use vmalloc to allocate firmware
download buffer").
Although we don't need physically-contiguous memory, we don't know if the
bus needs some particular alignment of the buffers. Since the change in
2014, the firmware download has always used whatever alignment vmalloc()
returns. To avoid introducing a new problem, the temporary buffer is still
used, to keep the same alignment of pointers passed to regmap_raw_write().
Ravi Hothi [Fri, 27 Feb 2026 14:45:34 +0000 (20:15 +0530)]
ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start
During ADSP stop and start, the kernel crashes due to the order in which
ASoC components are removed.
On ADSP stop, the q6apm-audio .remove callback unloads topology and removes
PCM runtimes during ASoC teardown. This deletes the RTDs that contain the
q6apm DAI components before their removal pass runs, leaving those
components still linked to the card and causing crashes on the next rebind.
Fix this by ensuring that all dependent (child) components are removed
first, and the q6apm component is removed last.
Linus Torvalds [Sun, 8 Mar 2026 19:13:09 +0000 (12:13 -0700)]
Merge tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Fix for the x86 EFI workaround keeping boot services code and data
regions reserved until after SetVirtualAddressMap() completes:
deferred struct page initialization may result in some of this memory
being lost permanently"
* tag 'efi-fixes-for-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efi: defer freeing of boot services memory
Linus Torvalds [Sun, 8 Mar 2026 01:12:06 +0000 (17:12 -0800)]
Merge tag 'x86-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix SEV guest boot failures in certain circumstances, due to
very early code relying on a BSS-zeroed variable that isn't
actually zeroed yet an may contain non-zero bootup values
Move the variable into the .data section go gain even earlier
zeroing
- Expose & allow the IBPB-on-Entry feature on SNP guests, which
was not properly exposed to guests due to initial implementational
caution
- Fix O= build failure when CONFIG_EFI_SBAT_FILE is using relative
file paths
- Fix the various SNC (Sub-NUMA Clustering) topology enumeration
bugs/artifacts (sched-domain build errors mostly).
SNC enumeration data got more complicated with Granite Rapids X
(GNR) and Clearwater Forest X (CWF), which exposed these bugs
and made their effects more serious
- Also use the now sane(r) SNC code to fix resctrl SNC detection bugs
- Work around a historic libgcc unwinder bug in the vdso32 sigreturn
code (again), which regressed during an overly aggressive recent
cleanup of DWARF annotations
* tag 'x86-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/vdso32: Work around libgcc unwinder bug
x86/resctrl: Fix SNC detection
x86/topo: Fix SNC topology mess
x86/topo: Replace x86_has_numa_in_package
x86/topo: Add topology_num_nodes_per_package()
x86/numa: Store extra copy of numa_nodes_parsed
x86/boot: Handle relative CONFIG_EFI_SBAT_FILE file paths
x86/sev: Allow IBPB-on-Entry feature for SNP guests
x86/boot/sev: Move SEV decompressor variables into the .data section
Linus Torvalds [Sun, 8 Mar 2026 01:09:15 +0000 (17:09 -0800)]
Merge tag 'timers-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Make clock_adjtime() syscall timex validation slightly more permissive
for auxiliary clocks, to not reject syscalls based on the status field
that do not try to modify the status field.
This makes the ABI behavior in clock_adjtime() consistent with
CLOCK_REALTIME"
* tag 'timers-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix timex status validation for auxiliary clocks
Linus Torvalds [Sun, 8 Mar 2026 01:07:13 +0000 (17:07 -0800)]
Merge tag 'sched-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a DL scheduler bug that may corrupt internal metrics during PI and
setscheduler() syscalls, resulting in kernel warnings and misbehavior.
Found during stress-testing"
* tag 'sched-urgent-2026-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting
Linus Torvalds [Sat, 7 Mar 2026 22:04:50 +0000 (14:04 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes and the rest in drivers, one core change to quirk the
behaviour of the Iomega Zip drive and one to fix a hang caused by tag
reallocation problems, which has mostly been seen by the iscsi client.
Note the latter fixes the problem but still has a slight sysfs memory
leak, so will be amended in the next pull request (once we've run the
fix for the fix through our testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix recursive locking in __configfs_open_file()
scsi: devinfo: Add BLIST_SKIP_IO_HINTS for Iomega ZIP
scsi: mpi3mr: Clear reset history on ready and recheck state after timeout
scsi: core: Fix refcount leak for tagset_refcnt
Linus Torvalds [Sat, 7 Mar 2026 20:38:16 +0000 (12:38 -0800)]
Merge tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"While testing Sasha Levin's 'kallsyms: embed source file:line info in
kernel stack traces' patch series, which increases the typical kernel
image size, I found some issues with the parisc initial kernel mapping
which may prevent the kernel to boot.
The three small patches here fix this"
* tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix initial page table creation for boot
parisc: Check kernel mapping earlier at bootup
parisc: Increase initial mapping to 64 MB with KALLSYMS
- Fix precision backtracking with linked registers (Eduard Zingerman)
- Fix linker flags detection for resolve_btfids (Ihor Solodrai)
- Fix race in update_ftrace_direct_add/del (Jiri Olsa)
- Fix UAF in bpf_trampoline_link_cgroup_shim (Lang Xu)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
resolve_btfids: Fix linker flags detection
selftests/bpf: add reproducer for spurious precision propagation through calls
bpf: collect only live registers in linked regs
Revert "selftests/bpf: Update reg_bound range refinement logic"
selftests/bpf: test refining u32/s32 bounds when ranges cross min/max boundary
bpf: Fix u32/s32 bounds when ranges cross min/max boundary
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
ftrace: Add missing ftrace_lock to update_ftrace_direct_add/del
Linus Torvalds [Sat, 7 Mar 2026 19:56:55 +0000 (11:56 -0800)]
Merge tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU selftest fixes from Boqun Feng:
"Fix a regression in RCU torture test pre-defined scenarios caused by
commit 7dadeaa6e851 ("sched: Further restrict the preemption modes")
which limits PREEMPT_NONE to architectures that do not support
preemption at all and PREEMPT_VOLUNTARY to those architectures that do
not yet have PREEMPT_LAZY support.
Since major architectures (e.g. x86 and arm64) no longer support
CONFIG_PREEMPT_NONE and CONFIG_PREEMPT_VOLUNTARY, using them in
rcutorture, rcuscale, refscale, and scftorture pre-defined scenarios
causes config checking errors.
Switch these kconfigs to PREEMPT_LAZY"
* tag 'rcu-fixes.v7.0-20260307a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
scftorture: Update due to x86 not supporting none/voluntary preemption
refscale: Update due to x86 not supporting none/voluntary preemption
rcuscale: Update due to x86 not supporting none/voluntary preemption
rcutorture: Update due to x86 not supporting none/voluntary preemption
Linus Torvalds [Sat, 7 Mar 2026 17:50:54 +0000 (09:50 -0800)]
Merge tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible NULL pointer dereference in trace_data_alloc()
On the trace_data_alloc() error path, it can call trigger_data_free()
with a NULL pointer. This used to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue
is that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
will only enable sched_waking whereas:
trace_event=sched_switch,sched_waking
will enable both.
The bootconfig makes it even worse as the second way is the more
common method.
The issue is that a temporary buffer is used to store the events to
enable later in boot. Each time the cmdline callback is called, it
overwrites what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size
parameter in the command line code causing overflow issues if more
that 2G is specified.
* tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix trace_buf_size= cmdline parameter with sizes >= 2G
tracing: Fix enabling multiple events on the kernel command line and bootconfig
tracing: Add NULL pointer check to trigger_data_free()
Ihor Solodrai [Thu, 5 Mar 2026 01:47:30 +0000 (17:47 -0800)]
resolve_btfids: Fix linker flags detection
The "|| echo -lzstd" default makes zstd an unconditional link
dependency of resolve_btfids. On systems where libzstd-dev is not
installed and pkg-config fails, the linker fails:
ld: cannot find -lzstd: No such file or directory
libzstd is a transitive dependency of libelf, so the -lzstd flag is
strictly necessary only for static builds [1].
Remove ZSTD_LIBS variable, and instead set LIBELF_LIBS depending on
whether the build is static or not. Use $(HOSTPKG_CONFIG) as primary
source of the flags list.
Also add a default value for HOSTPKG_CONFIG in case it's not built via
the toplevel Makefile. Pass it from selftests/bpf too.
Linus Torvalds [Sat, 7 Mar 2026 16:16:48 +0000 (08:16 -0800)]
Merge tag 'driver-core-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Danilo Krummrich:
- Revert "driver core: enforce device_lock for driver_match_device()":
When a device is already present in the system and a driver is
registered on the same bus, we iterate over all devices registered on
this bus to see if one of them matches. If we come across an already
bound one where the corresponding driver crashed while holding the
device lock (e.g. in probe()) we can't make any progress anymore.
Thus, revert and clarify that an implementer of struct bus_type must
not expect match() to be called with the device lock held.
* tag 'driver-core-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Revert "driver core: enforce device_lock for driver_match_device()"
====================
bpf: Fix precision backtracking bug with linked registers
Emil Tsalapatis reported a verifier bug hit by the scx_lavd sched_ext
scheduler. The essential part of the verifier log looks as follows:
436: ...
// checkpoint hit for 438: (1d) if r7 == r8 goto ...
frame 3: propagating r2,r7,r8
frame 2: propagating r6
mark_precise: frame3: last_idx ...
mark_precise: frame3: regs=r2,r7,r8 stack= before 436: ...
mark_precise: frame3: regs=r2,r7 stack= before 435: ...
mark_precise: frame3: regs=r2,r7 stack= before 434: (85) call bpf_trace_vprintk#177
verifier bug: backtracking call unexpected regs 84
The log complains that registers r2 and r7 are tracked as precise
while processing the bpf_trace_vprintk() call in precision backtracking.
This can't be right, as r2 is reset by the call and there is nothing
to backtrack it to. The precision propagation is triggered when
a checkpoint is hit at instruction 438, r2 is dead at that instruction.
This happens because of the following sequence of events:
- Instruction 438 is first reached with registers r2 and r7 having
the same id via a path that does not call bpf_trace_vprintk():
- Checkpoint is created at 438.
- The jump at 438 is predicted, hence r7 and registers linked to it
(r2) are propagated as precise, marking r2 and r7 precise in the
checkpoint.
- Instruction 438 is reached a second time with r2 undefined and via
a path that calls bpf_trace_vprintk():
- Checkpoint is hit.
- propagate_precision() picks registers r2 and r7 and propagates
precision marks for those up to the helper call.
The root cause is the fact that states_equal() and
propagate_precision() assume that the precision flag can't be set for a
dead register (as computed by compute_live_registers()).
However, this is not the case when linked registers are at play.
Fix this by accounting for live register flags in
collect_linked_regs().
---
====================
selftests/bpf: add reproducer for spurious precision propagation through calls
Add a test for the scenario described in the previous commit:
an iterator loop with two paths where one ties r2/r7 via
shared scalar id and skips a call, while the other goes
through the call. Precision marks from the linked registers
get spuriously propagated to the call path via
propagate_precision(), hitting "backtracking call unexpected
regs" in backtrack_insn().
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Linus Torvalds [Sat, 7 Mar 2026 04:27:13 +0000 (20:27 -0800)]
Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Split out .modinfo section from ELF_DETAILS macro, as that macro may
be used in other areas that expect to discard .modinfo, breaking
certain image layouts
- Adjust genksyms parser to handle optional attributes in certain
declarations, necessary after commit 07919126ecfc ("netfilter:
annotate NAT helper hook pointers with __rcu")
- Include resolve_btfids in external module build created by
scripts/package/install-extmod-build when it may be run on external
modules
- Avoid removing objtool binary with 'make clean', as it is required
for external module builds
* tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Leave objtool binary around with 'make clean'
kbuild: install-extmod-build: Package resolve_btfids if necessary
genksyms: Fix parsing a declarator with a preceding attribute
kbuild: Split .modinfo out from ELF_DETAILS
Linus Torvalds [Sat, 7 Mar 2026 03:57:03 +0000 (19:57 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are a fix to the way in which we manage the access
flag setting for mappings using the contiguous bit and a fix for a
hang on the kexec/hibernation path.
Summary:
- Fix kexec/hibernation hang due to bogus read-only mappings
- Fix sparse warnings in our cmpxchg() implementation
- Prevent runtime-const being used in modules, just like x86
- Fix broken elision of access flag modifications for contiguous
entries on systems without support for hardware updates
- Fix a broken SVE selftest that was testing the wrong instruction"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
selftest/arm64: Fix sve2p1_sigill() to hwcap test
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
arm64: make runtime const not usable by modules
arm64: mm: Add PTE_DIRTY back to PAGE_KERNEL* to fix kexec/hibernation
arm64: Silence sparse warnings caused by the type casting in (cmp)xchg
Calvin Owens [Sat, 7 Mar 2026 03:19:25 +0000 (19:19 -0800)]
tracing: Fix trace_buf_size= cmdline parameter with sizes >= 2G
Some of the sizing logic through tracer_alloc_buffers() uses int
internally, causing unexpected behavior if the user passes a value that
does not fit in an int (on my x86 machine, the result is uselessly tiny
buffers).
Fix by plumbing the parameter's real type (unsigned long) through to the
ring buffer allocation functions, which already use unsigned long.
It has always been possible to create larger ring buffers via the sysfs
interface: this only affects the cmdline parameter.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/bff42a4288aada08bdf74da3f5b67a2c28b761f8.1772852067.git.calvin@wbinvd.org Fixes: 73c5162aa362 ("tracing: keep ring buffer to minimum size till used") Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
====================
bpf: Fix u32/s32 bounds when ranges cross min/max boundary
Cover the following cases in range refinement logic for 32-bit ranges:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range.
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range.
These cases are already handled for 64-bit range refinement.
Without the fix the test in patch 2 is rejected by the verifier.
The test was reduced from sched-ext program.
Changelog:
- v2 -> v3:
- Reverted da653de268d3 (Paul)
- Removed !BPF_F_TEST_REG_INVARIANTS flag from
crossing_32_bit_signed_boundary_2() (Paul)
- v1 -> v2:
- Extended commit message and comments (Emil)
- Targeting 'bpf' tree instead of bpf-next (Alexei)
Revert "selftests/bpf: Update reg_bound range refinement logic"
This reverts commit da653de268d32a80e135c9eb960a8147c186f1bc.
Removed logic is now covered by range_refine_in_halves()
which handles both 32-bit and 64-bit refinements.
selftests/bpf: test refining u32/s32 bounds when ranges cross min/max boundary
Two test cases for signed/unsigned 32-bit bounds refinement
when s32 range crosses the sign boundary:
- s32 range [S32_MIN..1] overlapping with u32 range [3..U32_MAX],
s32 range tail before sign boundary overlaps with u32 range.
- s32 range [-3..5] overlapping with u32 range [0..S32_MIN+3],
s32 range head after the sign boundary overlaps with u32 range.
This covers both branches added in the __reg32_deduce_bounds().
Also, crossing_32_bit_signed_boundary_2() no longer triggers invariant
violations.
bpf: Fix u32/s32 bounds when ranges cross min/max boundary
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
Linus Torvalds [Sat, 7 Mar 2026 00:07:22 +0000 (16:07 -0800)]
Merge tag 'v7.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix potential oops on open failure
- Fix unmount to better free deferred closes
- Use proper constant-time MAC comparison function
- Two buffer allocation size fixes
- Two minor cleanups
- make SMB2 kunit tests a distinct module
* tag 'v7.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix oops due to uninitialised var in smb2_unlink()
cifs: open files should not hold ref on superblock
smb: client: Compare MACs in constant time
smb/client: remove unused SMB311_posix_query_info()
smb/client: fix buffer size for smb311_posix_qinfo in SMB311_posix_query_info()
smb/client: fix buffer size for smb311_posix_qinfo in smb2_compound_op()
smb: update some doc references
smb/client: make SMB2 maperror KUnit tests a separate module
tracing: Fix enabling multiple events on the kernel command line and bootconfig
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
Linus Torvalds [Fri, 6 Mar 2026 21:37:52 +0000 (13:37 -0800)]
Merge tag 'pci-v7.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Initialize msi_addr_mask for OF-created PCI devices to fix sparc and
powerpc probe regressions (Nilay Shroff)
- Orphan the Altera PCIe controller driver (Dave Hansen)
* tag 'pci-v7.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Orphan Altera PCIe controller driver
sparc/PCI: Initialize msi_addr_mask for OF-created PCI devices
powerpc/pci: Initialize msi_addr_mask for OF-created PCI devices
Linus Torvalds [Fri, 6 Mar 2026 21:29:12 +0000 (13:29 -0800)]
Merge tag 'drm-fixes-2026-03-07' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull.
There is one mm fix in here for a HMM livelock triggered by the xe
driver tests. Otherwise it's a pretty wide range of fixes across the
board, ttm UAF regression fix, amdgpu fixes, nouveau doesn't crash my
laptop anymore fix, and a fair bit of misc.
Seems about right for rc3.
mm:
- mm: Fix a hmm_range_fault() livelock / starvation problem
amdxdna:
- fix invalid payload for failed command
- fix NULL ptr dereference
- fix major fw version check
- avoid inconsistent fw state on error
i915/display:
- Fix for Lenovo T14 G7 display not refreshing
xe:
- Do not preempt fence signaling CS instructions
- Some leak and finalization fixes
- Workaround fix
nouveau:
- avoid runtime suspend oops when using dp aux
panthor:
- fix gem_sync argument ordering
solomon:
- fix incorrect display output
renesas:
- fix DSI divider programming
ethosu:
- fix job submit error clean-up refcount
- fix NPU_OP_ELEMENTWISE validation
- handle possible underflows in IFM size calcs"
* tag 'drm-fixes-2026-03-07' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
accel: ethosu: Handle possible underflow in IFM size calculations
accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar
accel: ethosu: Fix job submit error clean-up refcount underflows
accel/amdxdna: Split mailbox channel create function
drm/panthor: Correct the order of arguments passed to gem_sync
Revert "drm/syncobj: Fix handle <-> fd ioctls with dirty stack"
drm/ttm: Fix bo resource use-after-free
nouveau/dpcd: return EBUSY for aux xfer if the device is asleep
accel/amdxdna: Fix major version check on NPU1 platform
drm/amdgpu/userq: refcount userqueues to avoid any race conditions
drm/amdgpu/userq: Consolidate wait ioctl exit path
drm/amdgpu/psp: Use Indirect access address for GFX to PSP mailbox
drm/amdgpu: Fix use-after-free race in VM acquire
drm/amd/pm: remove invalid gpu_metrics.energy_accumulator on smu v13.0.x
drm/xe: Fix memory leak in xe_vm_madvise_ioctl
drm/xe/reg_sr: Fix leak on xa_store failure
drm/xe/xe2_hpg: Correct implementation of Wa_16025250150
drm/xe/gsc: Fix GSC proxy cleanup on early initialization failure
Revert "drm/pagemap: Disable device-to-device migration"
drm/i915/psr: Fix for Panel Replay X granularity DPCD register handling
...
Linus Torvalds [Fri, 6 Mar 2026 20:34:49 +0000 (12:34 -0800)]
Merge tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix rust warnings when CONFIG_PRINTK is disabled
- Reduce stack usage in kunit_run_tests() to fix warnings when
CONFIG_FRAME_WARN is set to a relatively low value
- Update email address for David Gow
- Copy caller args in kunit tool in run_kernel to prevent mutation
* tag 'linux_kselftest-kunit-fixes-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: reduce stack usage in kunit_run_tests()
kunit: tool: copy caller args in run_kernel to prevent mutation
rust: kunit: fix warning when !CONFIG_PRINTK
MAINTAINERS: Update email address for David Gow
Linus Torvalds [Fri, 6 Mar 2026 18:33:32 +0000 (10:33 -0800)]
Merge tag 'spi-fix-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One device specific fix here, it was possible we might end up trying
to dereference an invalid pointer while reporting a transfer timeout
on DesignWare controllers"
* tag 'spi-fix-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-dw-dma: fix print error log when wait finish transaction
Linus Torvalds [Fri, 6 Mar 2026 18:27:45 +0000 (10:27 -0800)]
Merge tag 'regulator-fix-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small, driver specific fixes which might not even have
much impact if you have the affected devices depending on your setup"
* tag 'regulator-fix-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pf9453: Respect IRQ trigger settings from firmware
regulator: mt6363: Fix incorrect and redundant IRQ disposal in probe
Linus Torvalds [Fri, 6 Mar 2026 18:06:04 +0000 (10:06 -0800)]
Merge tag 'sound-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of device-specific fixes. Most of changes are
fairly small device-specific quirks of fixes for HD- and USB-audio,
ASoC Intel, AMD, fsl, Cirrus and co.
The only large LOC is for plumbing ASoC ACP driver to add the Cirrus
Logic codec support, so this one is also just adding some tables"
* tag 'sound-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: us122l: drop redundant interface references
ASoC: amd: yc: Add DMI quirk for ASUS EXPERTBOOK PM1503CDA
ASoC: dt-bindings: renesas,rz-ssi: Document RZ/G3L SoC
ASoC: SDCA: Add allocation failure check for Entity name
ALSA: hda/senary: Ensure EAPD is enabled during init
ALSA: hda/senary: Use codec->core.afg for GPIO access
ALSA: doc: usb-audio: Add doc for QUIRK_FLAG_SKIP_IFACE_SETUP
ASoC: dt-bindings: tegra: Add compatible for Tegra238 sound card
ALSA: hda/hdmi: Add Tegra238 HDA codec device ID
ASoC: cs35l56: Suppress pointless warning about number of GPIO pulls
ASoC: amd: acp: Add ACP6.3 match entries for Cirrus Logic parts
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCD SKU
ASoC: rt1321: fix DMIC ch2/3 mask issue
ASoC: cs35l56: Only patch ASP registers if the DAI is part of a DAIlink
ASoC: fsl_easrc: Fix event generation in fsl_easrc_iec958_set_reg()
ASoC: fsl_easrc: Fix event generation in fsl_easrc_iec958_put_bits()
ALSA: firewire: dice: Fix printf warning with W=1
ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781
ALSA: hda/realtek: Add quirk for HP Pavilion 15-eh1xxx to enable mute LED
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
...
Guenter Roeck [Thu, 5 Mar 2026 19:33:39 +0000 (11:33 -0800)]
tracing: Add NULL pointer check to trigger_data_free()
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net Fixes: 0550069cc25f ("tracing: Properly process error handling in event_hist_trigger_parse()") Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Fri, 6 Mar 2026 18:00:58 +0000 (10:00 -0800)]
Merge tag 'hid-for-linus-2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few memory leaks (Günther Noack)
- fix potential kernel crashes in cmedia, creative-sb0540 and zydacron
(Greg Kroah-Hartman)
- fix NULL pointer dereference in pidff (Tomasz Pakuła)
- fix battery reporting for Apple Magic Trackpad 2 (Julius Lehmann)
- mcp2221 proper handling of failed read operation (Romain Sioen)
- various device quirks / device ID additions
* tag 'hid-for-linus-2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp2221: cancel last I2C command on read error
HID: asus: add xg mobile 2023 external hardware support
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
HID: multitouch: new class MT_CLS_EGALAX_P80H84
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
HID: pidff: Fix condition effect bit clearing
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
HID: asus: avoid memory leak in asus_report_fixup()
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
HID: apple: avoid memory leak in apple_report_fixup()
HID: Document memory allocation properties of report_fixup()
- touchscreen_dmi: Add quirk for y-inverted Goodix touchscreen on SUPI
S10
- uniwill-laptop:
- FN lock/super key lock attributes rename
- Fix crash on unexpected battery event
- A special key combination can alter FN lock status so mark it
volatile
- Handle FN lock event
* tag 'platform-drivers-x86-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (27 commits)
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
platform_data/mlxreg: mlxreg.h: fix all kernel-doc warnings
platform/x86: asus-armoury: add support for FA401UM
platform/x86: asus-armoury: add support for GX650RX
platform/x86: hp-bioscfg: Support allocations of larger data
platform/x86: oxpec: Add support for Aokzoe A2 Pro
platform/x86: oxpec: Add support for OneXPlayer X1 Air
platform/x86: oxpec: Add support for OneXPlayer X1z
platform/x86: oxpec: Add support for OneXPlayer APEX
platform/x86: uniwill-laptop: Handle FN lock event
platform/x86: uniwill-laptop: Mark FN lock status as being volatile
platform/x86: uniwill-laptop: Fix crash on unexpected battery event
platform/x86: uniwill-laptop: Rename FN lock and super key lock attrs
platform/x86: redmi-wmi: Add more hotkey mappings
platform/x86: alienware-wmi-wmax: Add G-Mode support to m18 laptops
platform/x86: hp-wmi: add Omen 14-fb1xxx (board 8E41) support
platform/x86: dell-wmi: Add audio/mic mute key codes
platform/x86: hp-wmi: Add Victus 16-d0xxx support
platform/x86: intel-hid: Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
platform/x86: int3472: Handle GPIO type 0x10 (DOVDD)
...
Linus Torvalds [Fri, 6 Mar 2026 17:22:51 +0000 (09:22 -0800)]
Merge tag 'slab-for-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for slab->stride truncation on 64k page systems due to short
type. It was not due to races and lack of barriers in the end. (Harry
Yoo)
- Fix for severe performance regression due to unnecessary sheaf refill
restrictions exposed by mempool allocation strategy. (Vlastimil
Babka)
- Stable fix for potential silent percpu sheaf flushing failures on
PREEMPT_RT. (Vlastimil Babka)
* tag 'slab-for-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: change stride type from unsigned short to unsigned int
mm/slab: allow sheaf refill if blocking is not allowed
slab: distinguish lock and trylock for sheaf_flush_main()
Linus Torvalds [Fri, 6 Mar 2026 17:16:39 +0000 (09:16 -0800)]
Merge tag 'pmdomain-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- rockchip: Fix PD_VCODEC for RK3588
- bcm: Fix broken reset status read for bcm2835
* tag 'pmdomain-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: rockchip: Fix PD_VCODEC for RK3588
pmdomain: bcm: bcm2835-power: Fix broken reset status read
Linus Torvalds [Fri, 6 Mar 2026 17:10:36 +0000 (09:10 -0800)]
Require (reasonably) normal mappings for MADV_DOFORK
This came up as a result of the tracing fix pull request, and commit e39bb9e02b68 ("tracing: Fix WARN_ON in tracing_buffers_mmap_close") in
particular.
The use of MADV_DOFORK confused the ring buffer mapping reference
counting just because it was unexpected, since the mapping was
originally done with VM_DONTCOPY.
The tracing code may well be the only case of this (and fixed it all by
just using the mmap open callback to unconfuse itself), but it's just
strange that we allow MADV_DOFORK on special mappings where the kernel
has set the "don't copy this" bit.
The code already disallowed it for VM_IO mappings (going back to the
original commit f822566165dd: "madvise MADV_DONTFORK/MADV_DOFORK"), so
just extend it to any of the VM_SPECIAL cases (which includes
VM_DONTEXPAND | VM_PFNMAP | VM_MIXEDMAP in addition to VM_IO).
We could also allow MADV_DOFORK only on mappings that had been marked
DONTFORK by the user. But that would require us to track that
(presumably with another VM_xyz bit), so let's just do this trivial and
straightforward modifications.
If anybody notices, Lorenzo will be boarding Flying Pig Airlines.
Suggested-by: David Hildenbrand (Arm) <david@kernel.org> Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org> Link: https://lore.kernel.org/all/a8907468-d7e9-4727-af28-66d905093230@kernel.org/ Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 6 Mar 2026 16:44:20 +0000 (08:44 -0800)]
Merge tag 'v7.0-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix use-after-free in ccp
- Fix bug when SEV is disabled in ccp
- Fix tfm_count leak in atmel-sha204a
* tag 'v7.0-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: atmel-sha204a - Fix OOM ->tfm_count leak
crypto: ccp - Fix use-after-free on error path
crypto: ccp - allow callers to use HV-Fixed page API when SEV is disabled
Linus Torvalds [Fri, 6 Mar 2026 16:41:20 +0000 (08:41 -0800)]
Merge tag 'ata-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Fix a problem where the deferred non-NCQ command would incorrectly
get completed as a failed command, if there was another command that
timed out. Found by Gemini (Guenter)
- The deferred non-NCQ command work is only supposed to run after the
last NCQ command finishes. However, because the work was never
canceled on error (e.g. a timeout), the work could incorrectly run
when commands were still in flight. Found by syzbot (me)
- Add a quirk to make sure that QEMU harddrives can potentially use up
to 32 MiB I/Os (Pedro)
- Add a quirk to disable LPM on Seagate ST1000DM010-2EP102 (Maximilian)
* tag 'ata-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-eh: Fix detection of deferred qc timeouts
ata: libata-core: Add BRIDGE_OK quirk for QEMU drives
ata: libata: cancel pending work after clearing deferred_qc
ata: libata-core: Disable LPM on ST1000DM010-2EP102
Linus Torvalds [Fri, 6 Mar 2026 16:36:18 +0000 (08:36 -0800)]
Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
Linus Torvalds [Fri, 6 Mar 2026 16:31:36 +0000 (08:31 -0800)]
Merge tag 'io_uring-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a typo in the mock_file help text
- Fix a comment regarding IORING_SETUP_TASKRUN_FLAG in the
io_uring.h UAPI header
- Use READ_ONCE() for reading refill queue entries
- Reject SEND_VECTORIZED for fixed buffer sends, as it isn't
implemented. Currently this flag is silently ignored
This is in preparation for making these work, but first we
need a fixup so that older kernels will correctly reject them
- Ensure "0" means default for the rx page size
* tag 'io_uring-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: use READ_ONCE with user shared RQEs
io_uring/mock: Fix typo in help text
io_uring/net: reject SEND_VECTORIZED when unsupported
io_uring: correct comment for IORING_SETUP_TASKRUN_FLAG
io_uring/zcrx: don't set rx_page_size when not requested
kthread_exit became a macro to do_exit in commit 28aaa9c39945
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yifan Wu [Thu, 5 Mar 2026 01:36:37 +0000 (09:36 +0800)]
selftest/arm64: Fix sve2p1_sigill() to hwcap test
The FEAT_SVE2p1 is indicated by ID_AA64ZFR0_EL1.SVEver. However,
the BFADD requires the FEAT_SVE_B16B16, which is indicated by
ID_AA64ZFR0_EL1.B16B16. This could cause the test to incorrectly
fail on a CPU that supports FEAT_SVE2.1 but not FEAT_SVE_B16B16.
LD1Q Gather load quadwords which is decoded from SVE encodings and
implied by FEAT_SVE2p1.
Fixes: c5195b027d29 ("kselftest/arm64: Add SVE 2.1 to hwcap test") Signed-off-by: Yifan Wu <wuyifan50@huawei.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
contpte_ptep_set_access_flags() compared the gathered ptep_get() value
against the requested entry to detect no-ops. ptep_get() ORs AF/dirty
from all sub-PTEs in the CONT block, so a dirty sibling can make the
target appear already-dirty. When the gathered value matches entry, the
function returns 0 even though the target sub-PTE still has PTE_RDONLY
set in hardware.
For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may
set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered
across the CONT range. But page-table walkers that evaluate each
descriptor individually (e.g. a CPU without DBM support, or an SMMU
without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the
unchanged target sub-PTE, causing an infinite fault loop.
Gathering can therefore cause false no-ops when only a sibling has been
updated:
- write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)
- read faults: target still lacks PTE_AF
Fix by checking each sub-PTE against the requested AF/dirty/write state
(the same bits consumed by __ptep_set_access_flags()), using raw
per-PTE values rather than the gathered ptep_get() view, before
returning no-op. Keep using the raw target PTE for the write-bit unfold
decision.
Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT
range may become the effective cached translation and software must
maintain consistent attributes across the range.
Fixes: 4602e5757bcc ("arm64/mm: wire up PTE_CONT for user mappings") Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Breno Leitao <leitao@debian.org> Cc: stable@vger.kernel.org Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: James Houghton <jthoughton@google.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Breno Leitao <leitao@debian.org> Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com> Acked-by: Balbir Singh <balbirs@nvidia.com> Signed-off-by: Will Deacon <will@kernel.org>
Helge Deller [Wed, 4 Mar 2026 21:24:18 +0000 (22:24 +0100)]
parisc: Fix initial page table creation for boot
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or
64 MB) of the page table during bootup. Up until now the whole area was
initialized with PTE entries, but there was no check if we filled too
many entries. Change the code to fill up with so many entries that the
"_end" symbol can be reached by the kernel, but not more entries than
actually fit into the initial PTE tables.
Helge Deller [Tue, 3 Mar 2026 22:36:11 +0000 (23:36 +0100)]
parisc: Check kernel mapping earlier at bootup
The check if the initial mapping is sufficient needs to happen much
earlier during bootup. Move this test directly to the start_parisc()
function and use native PDC iodc functions to print the warning, because
panic() and printk() are not functional yet.
This fixes boot when enabling various KALLSYSMS options which need
much more space.
Dave Airlie [Fri, 6 Mar 2026 09:40:23 +0000 (19:40 +1000)]
Merge tag 'drm-misc-fixes-2026-03-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Another early drm-misc-fixes PR to revert the previous uapi fix sent in
drm-misc-fixes-2026-03-05, together with a UAF fix in TTM, an argument
order fix for panthor, a fix for the firmware getting stuck on
resource allocation error handling for amdxdna, and a few fixes for
ethosu (size calculation and reference underflows, and a validation
fix).
Dave Airlie [Fri, 6 Mar 2026 07:45:47 +0000 (17:45 +1000)]
Merge tag 'drm-misc-fixes-2026-03-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A return type fix for ttm, a display fix for solomon, several misc fixes
for amdxdna, a DSI clock rate fix for rz-du, a uapi fix for syncobj, a
possible build failure fix for dma-buf, a doc warning fix for sched, a
build failure fix for ttm tests, and a crash fix when suspended for
nouveau.
Guenter Roeck [Fri, 6 Mar 2026 02:48:05 +0000 (18:48 -0800)]
ata: libata-eh: Fix detection of deferred qc timeouts
If the ata_qc_for_each_raw() loop finishes without finding a matching SCSI
command for any QC, the variable qc will hold a pointer to the last element
examined, which has the tag i == ATA_MAX_QUEUE - 1. This qc can match the
port deferred QC (ap->deferred_qc).
If that happens, the condition qc == ap->deferred_qc evaluates to true
despite the loop not breaking with a match on the SCSI command for this QC.
In that case, the error handler mistakenly intercepts a command that has
not been issued yet and that has not timed out, and thus erroneously
returning a timeout error.
Fix the problem by checking for i < ATA_MAX_QUEUE in addition to
qc == ap->deferred_qc.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro Fixes: eddb98ad9364 ("ata: libata-eh: correctly handle deferred qc timeouts") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[cassel: modified commit log as suggested by Damien] Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Paulo Alcantara [Fri, 6 Mar 2026 00:57:06 +0000 (21:57 -0300)]
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
Reported-by: Thiago Becker <tbecker@redhat.com> Fixes: 1cf9f2a6a544 ("smb: client: handle unlink(2) of files open by different clients") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Cc: David Howells <dhowells@redhat.com> Cc: linux-cifs@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
accel: ethosu: Handle possible underflow in IFM size calculations
If the command stream has larger padding sizes than the IFM and OFM
diminsions, then the calculations will underflow to a negative value.
The result is a very large region bounds which is caught on submit, but
it's better to catch it earlier.
Current mesa ethosu driver has a signedness bug which resulted in
padding of 127 (the max) and triggers this issue.
accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar
The NPU_OP_ELEMENTWISE instruction uses a scalar value for IFM2 if the
IFM2_BROADCAST "scalar" mode is set. It is a bit (7) on the u65 and
part of a field (bits 3:0) on the u85. The driver was hardcoded to the
u85.
If the job submit fails before adding the job to the scheduler queue
such as when the GEM buffer bounds checks fail, then doing a
ethosu_job_put() results in a pm_runtime_put_autosuspend() without the
corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are
also unnecessary, but seem to be harmless.
Split the ethosu_job_cleanup() function into 2 parts for the before
and after the job is queued.
scftorture: Update due to x86 not supporting none/voluntary preemption
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such scftorture scenarios
to CONFIG_PREEMPT_LAZY.
refscale: Update due to x86 not supporting none/voluntary preemption
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such refscale scenarios
to CONFIG_PREEMPT_LAZY.
rcuscale: Update due to x86 not supporting none/voluntary preemption
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcuscale scenarios
to CONFIG_PREEMPT_LAZY.
rcutorture: Update due to x86 not supporting none/voluntary preemption
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcutorture scenarios
to CONFIG_PREEMPT_LAZY.
Linus Torvalds [Thu, 5 Mar 2026 19:49:05 +0000 (11:49 -0800)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code
- Add a kunitconfig file for lib/crypto/
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib"
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Fix stale references to aes-generic
crypto: Clean up help text for CRYPTO_CRC32
crypto: Clean up help text for CRYPTO_CRC32C
crypto: Clean up help text for CRYPTO_XXHASH
crypto: Clean up help text for CRYPTO_SHA256
crypto: Clean up help text for CRYPTO_BLAKE2B
lib/crypto: tests: Add a .kunitconfig file
lib/crypto: tests: Depend on library options rather than selecting them
kunit: irq: Ensure timer doesn't fire too frequently
Linus Torvalds [Thu, 5 Mar 2026 19:37:27 +0000 (11:37 -0800)]
Merge tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
- Revert a commit related to ACPI device power management that was
not supposed to make any functional difference, but it did so and
introduced a regression (Rafael Wysocki)
- Update the _CPC object definition in ACPICA to match ACPI 6.6 and
prevent the kernel from printing a false-positive warning regarding
_CPC output package format on platforms shipping with firmware based
on ACPI 6.6 (Saket Dumbre)
* tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM"
ACPICA: Update the _CPC definition to match ACPI 6.6
Linus Torvalds [Thu, 5 Mar 2026 19:00:46 +0000 (11:00 -0800)]
Merge tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Merge a fix updating the _CPC object definition in ACPICA to avoid
printing a false-positive output package format warning on new
platforms (Saket Dumbre)
* acpica:
ACPICA: Update the _CPC definition to match ACPI 6.6
Lizhi Hou [Thu, 5 Mar 2026 06:20:41 +0000 (22:20 -0800)]
accel/amdxdna: Split mailbox channel create function
The management channel used for firmware control command submission is
currently created after the firmware is started. If channel creation
fails (for example, due to memory allocation failure or workqueue
creation interruption), the firmware remains in a pending state and is
unable to receive any control commands.
To avoid leaving the firmware in this inconsistent state, split
xdna_mailbox_create_channel() into two separate functions so that
resource allocation can be completed before interacting with the
hardware.
xdna_mailbox_alloc_channel()
Allocates memory and initializes the workqueue. This can be called
earlier, before interacting with the hardware.
xdna_mailbox_start_channel()
Performs the hardware interaction required to start the channel.
Rename xdna_mailbox_destroy_channel() to xdna_mailbox_free_channel().
Ensure that xdna_mailbox_stop_channel() and xdna_mailbox_free_channel()
properly unwind the corresponding start and allocation steps, respectively.
Akash Goel [Thu, 5 Mar 2026 11:07:23 +0000 (11:07 +0000)]
drm/panthor: Correct the order of arguments passed to gem_sync
This commit corrects the order of arguments passed to panthor_gem_sync()
function, called when the SYNC_WAIT condition has to be evaluated for a
blocked GPU queue.
Fixes: cd2c9c3015e6 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable") Signed-off-by: Akash Goel <akash.goel@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patch.msgid.link/20260305110723.2871733-1-akash.goel@arm.com Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
projects / thirdparty / linux.git / log
