Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sean Wang [Tue, 24 Feb 2026 06:13:18 +0000 (00:13 -0600)]
mmc: sdio: add MediaTek MT7902 SDIO device ID
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Thorsten Blum [Mon, 23 Feb 2026 23:33:42 +0000 (00:33 +0100)]
Bluetooth: btintel_pcie: Use struct_size to improve hci_drv_read_info
Use struct_size(), which provides additional compile-time checks for
structures with flexible array members (e.g., __must_be_array()), to
determine the allocation size for a new 'struct hci_drv_rp_read_info'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dylan Eray [Thu, 19 Feb 2026 19:32:09 +0000 (20:32 +0100)]
Bluetooth: btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
Add USB device ID (04ca:3807) for a Lite-On Wireless_Device containing
a MediaTek MT7921 (MT7920) Bluetooth chipset found in Acer laptops.
Without this entry, btusb binds via the generic USB class-based wildcard
match but never sets the BTUSB_MEDIATEK flag. This means btmtk never
triggers firmware loading, and the driver sends a raw HCI Reset that
the uninitialized chip cannot respond to, resulting in:
Bluetooth: hci0: Opcode 0x0c03 failed: -110
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Dylan Eray <dylan.eray6@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hans de Goede [Thu, 12 Feb 2026 14:17:21 +0000 (15:17 +0100)]
Bluetooth: hci_qca: Fix BT not getting powered-off on rmmod
The BT core skips calling the hci_dev's shutdown method when the HCI
is unregistered. This means that qca_power_off() was not getting called
leaving BT powered on.
This causes regulators / pwrseq providers to not get disabled which also
causes problem when re-loading the module because regulators and pwrseq
providers have an enablecount which now has never dropped to 0, causing
the BT to not get properly reset between rmmod and re-load which causes
initialization failure on the re-load.
Fix this by calling qca_power_off() from qca_close() when BT has not
already been powered off through a qca_hci_shutdown() call.
hci_ldisc.c will call qca_close() after freeing the hdev, so this
means that qca_power_off() can now no longer deref hu->hdev, change
the logging in qca_power_off() to no longer use hu->hdev.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hans de Goede [Thu, 12 Feb 2026 14:17:20 +0000 (15:17 +0100)]
Bluetooth: hci_qca: Fix confusing shutdown() and power_off() naming
The function called qca_power_off() is actually the hci_dev shutdown
handler, rename it to qca_hci_shutdown() to make this clear.
While the qca_power_shutdown() function is actually the counter-part
of qca_power_on() rename it to qca_power_off() to make this clear.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Marek Vasut [Mon, 9 Feb 2026 17:11:48 +0000 (18:11 +0100)]
Bluetooth: btbcm: Add entry for BCM4343A2 UART Bluetooth
This patch adds the device ID for the BCM4343A2 module, found e.g.
in the muRata 1YN WiFi+BT combined device. The required firmware
file is named 'BCM4343A2.hcd'.
Signed-off-by: Marek Vasut <marex@nabladev.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Vivek Sahu [Tue, 10 Feb 2026 12:01:01 +0000 (17:31 +0530)]
Bluetooth: qca: Refactor code on the basis of chipset names
Whenever new chipset support is added to the driver code,
we ended up adding chipset name to the last of the switch case
arising code readability issue because of improper sorting of
the chipset names in various places of the code.
Refactor code such a way that new chipset can be added easily
in the code without compromising code readability.
Signed-off-by: Vivek Sahu <vivek.sahu@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Tue, 3 Feb 2026 06:25:10 +0000 (14:25 +0800)]
Bluetooth: btmtk: Add reset mechanism if downloading firmware failed
Add a new flag 'BTMTK_FIRMWARE_DL_RETRY'.
If an error occurs during mt79xx firmware download process, this flag
will be set and cleared after a reset. If the flag is already set and
firmware still cannot be loaded successfully after a reset, no further
reset attempts will be made. In other words, if there is a problem during
firmware download, only one reset will be attempted.
Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Tue, 3 Feb 2026 06:25:09 +0000 (14:25 +0800)]
Bluetooth: btmtk: add status check in mt79xx firmware setup
To prevent abnormal controller states, it is necessary to check
status in another part of the mt79xx firmware setup. During this
process, receiving the 'BTMTK_WMT_PATCH_PROGRESS' status is unexpected.
If this occurs, it should be treated as an error, and driver must be
prevented from continuing execution.
Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If retries are exhausted, driver should not do futher operation.
During mt79xx firmware download process, if the retry count reaches0,
driver will return an -EIO error and release the firmware resources.
Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Dongyang Jin [Tue, 3 Feb 2026 07:10:48 +0000 (15:10 +0800)]
Bluetooth: btbcm: remove done label in btbcm_patchram
There is no point in having the label since all it does is return the
value in the 'err' variable. Instead make every goto return directly
and remove the label.
Signed-off-by: Dongyang Jin <jindongyang@kylinos.cn> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Tue, 3 Feb 2026 19:57:21 +0000 (21:57 +0200)]
Bluetooth: hci_core: Rate limit the logging of invalid ISO handle
Some controller firmwares (eg for MT7925) continuously send invalid ISO
packet, which result to "ISO unknown handle" error spam in logs. It's
not important to show all of them to the user.
Rate limit these ISO error messages, similarly as we do for SCO.
Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Hangbin Liu [Wed, 8 Apr 2026 07:19:05 +0000 (15:19 +0800)]
tools: ynl: tests: fix leading space on Makefile target
The ../generated/protos.a rule had a spurious leading space before the
target name. In make, target rules must start at column 0; only recipe
lines are indented with a tab. The extra space caused make to misparse
the rule.
Remove the leading space to match the style of the adjacent
../lib/ynl.a rule.
People (do people still write code or is it all AI?) seem to not
get that ksft_run() can only be called once. If we call it
multiple times KTAP parsers will likely cut off after the first
batch has finished.
Kevin Hao [Tue, 7 Apr 2026 00:45:39 +0000 (08:45 +0800)]
net: macb: Use napi_schedule_irqoff() in IRQ handler
For non-PREEMPT_RT kernels, the IRQ handler runs with interrupts
disabled, allowing the use of napi_schedule_irqoff() to save a pair of
local_irq_{save,restore} operations. For PREEMPT_RT kernels,
napi_schedule_irqoff() behaves identically to napi_schedule().
Qingfang Deng [Tue, 7 Apr 2026 09:40:56 +0000 (17:40 +0800)]
ppp: consolidate refcount decrements
ppp_destroy_{channel,interface} are always called after
refcount_dec_and_test().
To reduce boilerplate code, consolidate the decrements by moving them
into the two functions. To reflect this change in semantics, rename the
functions to ppp_release_*.
Marek Vasut [Sun, 5 Apr 2026 23:29:58 +0000 (01:29 +0200)]
net: phy: realtek: Add property to enable SSC
Add support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. The implementation
follows EMI improvement application note Rev. 1.2 for these PHYs.
The current implementation enables SSC for both RXC and SYSCLK clock
signals. Introduce DT properties 'realtek,clkout-ssc-enable',
'realtek,rxc-ssc-enable' and 'realtek,sysclk-ssc-enable' which control
CLKOUT, RXC and SYSCLK SSC spread spectrum clocking enablement on these
signals.
Document support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. Introduce DT properties
'realtek,clkout-ssc-enable', 'realtek,rxc-ssc-enable' and
'realtek,sysclk-ssc-enable' which control CLKOUT, RXC and SYSCLK
SSC spread spectrum clocking enablement on these signals. These
clock are not exposed via the clock API, therefore assigned-clock-sscs
property does not apply.
IFA_F_PERMANENT addresses require the allocation of a bunch of percpu
pointers, currently in atomic scope.
Similar to commit 51454ea42c1a ("ipv6: fix locking issues with loops
over idev->addr_list"), move fixup_permanent_addr() outside the
&idev->lock scope, and do the allocations with GFP_KERNEL. With such
change fixup_permanent_addr() is invoked with the BH enabled, and the
ifp lock acquired there needs the BH variant.
Note that we don't need to acquire a reference to the permanent
addresses before releasing the mentioned write lock, because
addrconf_permanent_addr() runs under RTNL and ifa removal always happens
under RTNL, too.
Also the PERMANENT flag is constant in the relevant scope, as it can be
cleared only by inet6_addr_modify() under the RTNL lock.
David Carlier [Tue, 7 Apr 2026 15:07:58 +0000 (16:07 +0100)]
net: use get_random_u{16,32,64}() where appropriate
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Skipped sites writing into __be16 (netdevsim) and __le64
(ceph) fields where a direct assignment would trigger
sparse endianness warnings.
Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260407150758.5889-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 8 Apr 2026 22:12:51 +0000 (15:12 -0700)]
net: remove the netif_get_rx_queue_lease_locked() helpers
The netif_get_rx_queue_lease_locked() API hides the locking
and the descend onto the leased queue. Making the code
harder to follow (at least to me). Remove the API and open
code the descend a bit. Most of the code now looks like:
if (!leased)
return __helper(x);
hw_rxq = ..
netdev_lock(hw_rxq->dev);
ret = __helper(x);
netdev_unlock(hw_rxq->dev);
return ret;
Of course if we have more code paths that need the wrapping
we may need to revisit. For now, IMHO, having to know what
netif_get_rx_queue_lease_locked() does is not worth the 20LoC
it saves.
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
David Wei [Thu, 2 Apr 2026 23:10:31 +0000 (01:10 +0200)]
selftests/net: Add queue leasing tests with netkit
Add extensive selftests for netkit queue leasing, using io_uring zero
copy test binary inside of a netns with netkit. This checks that memory
providers can be bound against virtual queues in a netkit within a
netns that are leasing from a physical netdev in the default netns.
Also add various test cases around corner cases for the queue creation
itself as well as queue info dumping and teardown in case of netkit in
device pair and single mode.
Daniel Borkmann [Thu, 2 Apr 2026 23:10:30 +0000 (01:10 +0200)]
netkit: Add xsk support for af_xdp applications
Enable support for AF_XDP applications to operate on a netkit device.
The goal is that AF_XDP applications can natively consume AF_XDP
from network namespaces. The use-case from Cilium side is to support
Kubernetes KubeVirt VMs through QEMU's AF_XDP backend. KubeVirt is a
virtual machine management add-on for Kubernetes which aims to provide
a common ground for virtualization. KubeVirt spawns the VMs inside
Kubernetes Pods which reside in their own network namespace just like
regular Pods.
Raw QEMU AF_XDP backend example with eth0 being a physical device with
16 queues where netkit is bound to the last queue (for multi-queue RSS
context can be used if supported by the driver):
# ethtool -X eth0 start 0 equal 15
# ethtool -X eth0 start 15 equal 1 context new
# ethtool --config-ntuple eth0 flow-type ether \
src 00:00:00:00:00:00 \
src-mask ff:ff:ff:ff:ff:ff \
dst $mac dst-mask 00:00:00:00:00:00 \
proto 0 proto-mask 0xffff action 15
[ ... setup BPF/XDP prog on eth0 to steer into shared xsk map ... ]
# ip netns add foo
# ip link add numrxqueues 2 nk type netkit single
# ynl --family netdev --output-json --do queue-create \
--json "{"ifindex": $(ifindex nk), "type": "rx", \
"lease": { "ifindex": $(ifindex eth0), \
"queue": { "type": "rx", "id": 15 } } }"
{'id': 1}
# ip link set nk netns foo
# ip netns exec foo ip link set lo up
# ip netns exec foo ip link set nk up
# ip netns exec foo qemu-system-x86_64 \
-kernel $kernel \
-drive file=${image_name},index=0,media=disk,format=raw \
-append "root=/dev/sda rw console=ttyS0" \
-cpu host \
-m $memory \
-enable-kvm \
-device virtio-net-pci,netdev=net0,mac=$mac \
-netdev af-xdp,ifname=nk,id=net0,mode=native,queues=1,start-queue=1,inhibit=on,map-path=$dir/xsks_map \
-nographic
We have tested the above against a dual-port Nvidia ConnectX-6 (mlx5)
100G NIC with successful network connectivity out of QEMU. An earlier
iteration of this work was presented at LSF/MM/BPF [0] and more
recently at LPC [1].
For getting to a first starting point to connect all things with
KubeVirt, bind mounting the xsk map from Cilium into the VM launcher
Pod which acts as a regular Kubernetes Pod while not perfect, is not
a big problem given its out of reach from the application sitting
inside the VM (and some of the control plane aspects are baked in
the launcher Pod already), so the isolation barrier is still the VM.
Eventually the goal is to have a XDP/XSK redirect extension where
there is no need to have the xsk map, and the BPF program can just
derive the target xsk through the queue where traffic was received
on.
The exposure through netkit is because Cilium should not act as a
proxy handing out xsk sockets. Existing applications expect a netdev
from kernel side and should not need to rewrite just to implement
against a CNI's protocol. Also, all the memory should not be accounted
against Cilium but rather the application Pod itself which is consuming
AF_XDP. Further, on up/downgrades we expect the data plane to being
completely decoupled from the control plane; if Cilium would own the
sockets that would be disruptive. Another use-case which opens up and
is regularly asked from users would be to have DPDK applications on
top of AF_XDP in regular Kubernetes Pods.
Daniel Borkmann [Thu, 2 Apr 2026 23:10:29 +0000 (01:10 +0200)]
netkit: Add netkit notifier to check for unregistering devices
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei [Thu, 2 Apr 2026 23:10:28 +0000 (01:10 +0200)]
netkit: Implement rtnl_link_ops->alloc and ndo_queue_create
Implement rtnl_link_ops->alloc that allows the number of rx queues to be
set when netkit is created. By default, netkit has only a single rxq (and
single txq). The number of queues is deliberately not allowed to be changed
via ethtool -L and is fixed for the lifetime of a netkit instance.
For netkit device creation, numrxqueues with larger than one rxq can be
specified. These rxqs are leasable to real rxqs in physical netdevs:
ip link add type netkit peer numrxqueues 64 # for device pair
ip link add numrxqueues 64 type netkit single # for single device
The limit of numrxqueues for netkit is currently set to 1024, which allows
leasing multiple real rxqs from physical netdevs.
The implementation of ndo_queue_create() adds a new rxq during the queue
lease operation. We allow to create queues either in single device mode
or for the case of dual device mode for the netkit peer device which gets
placed into the target network namespace. For dual device mode the lease
against the primary device does not make sense for the targeted use cases,
and therefore gets rejected.
We also need to add a lockdep class for netkit, such that lockdep does
not trip over us, similarly done as in commit 0bef512012b1 ("net: add
netdev_lockdep_set_classes() to virtual drivers").
This is also the last missing bit to netkit for supporting io_uring with
zero-copy mode [0]. Up until this point it was not possible to consume the
latter out of containers or Kubernetes Pods where applications are in their
own network namespace.
io_uring example with eth0 being a physical device with 16 queues where
netkit is bound to the last queue, iou-zcrx.c is binary from selftests;
ethtool configuration (tcp-data-split, hds_thresh, RSS, flow steering)
is done on the physical device by the control plane; here, flow steering
to that queue is based on the service VIP:port of the server utilizing
io_uring:
# ethtool -X eth0 start 0 equal 15
# ethtool -X eth0 start 15 equal 1 context new
# ethtool --config-ntuple eth0 flow-type tcp4 dst-ip 1.2.3.4 dst-port 5000 action 15
# ip netns add foo
# ip link add type netkit peer numrxqueues 2
# ynl --family netdev --output-json --do queue-create \
--json "{"ifindex": $(ifindex nk0), "type": "rx", \
"lease": { "ifindex": $(ifindex eth0), \
"queue": { "type": "rx", "id": 15 } } }"
{'id': 1}
# ip link set nk0 netns foo
# ip link set nk1 up
# ip netns exec foo ip link set lo up
# ip netns exec foo ip link set nk0 up
# ip netns exec foo ip addr add 1.2.3.4/32 dev nk0
[ ... setup routing etc to get external traffic into the netns ... ]
# ip netns exec foo ./iou-zcrx -s -p 5000 -i nk0 -q 1
For Cilium, the plan is to open up support for the various memory providers
for regular Kubernetes Pods when Cilium is configured with netkit datapath
mode.
Daniel Borkmann [Thu, 2 Apr 2026 23:10:27 +0000 (01:10 +0200)]
netkit: Add single device mode for netkit
Add a single device mode for netkit instead of netkit pairs. The primary
target for the paired devices is to connect network namespaces, of course,
and support has been implemented in projects like Cilium [0]. For the rxq
leasing the plan is to support two main scenarios related to single device
mode:
* For the use-case of io_uring zero-copy, the control plane can either
set up a netkit pair where the peer device can perform rxq leasing which
is then tied to the lifetime of the peer device, or the control plane
can use a regular netkit pair to connect the hostns to a Pod/container
and dynamically add/remove rxq leasing through a single device without
having to interrupt the device pair. In the case of io_uring, the memory
pool is used as skb non-linear pages, and thus the skb will go its way
through the regular stack into netkit. Things like the netkit policy when
no BPF is attached or skb scrubbing etc apply as-is in case the paired
devices are used, or if the backend memory is tied to the single device
and traffic goes through a paired device.
* For the use-case of AF_XDP, the control plane needs to use netkit in the
single device mode. The single device mode currently enforces only a
pass policy when no BPF is attached, and does not yet support BPF link
attachments for AF_XDP. skbs sent to that device get dropped at the
moment. Given AF_XDP operates at a lower layer of the stack tying this
to the netkit pair did not make sense. In future, the plan is to allow
BPF at the XDP layer which can: i) process traffic coming from the AF_XDP
application (e.g. QEMU with AF_XDP backend) to filter egress traffic or
to push selected egress traffic up to the single netkit device to the
local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the
single netkit into the AF_XDP application (e.g. DHCP replies). Also,
the control-plane can dynamically manage rxq leasing for the single
netkit device without having to interrupt (e.g. down/up cycle) the main
netkit pair for the Pod which has traffic going in and out.
Daniel Borkmann [Thu, 2 Apr 2026 23:10:26 +0000 (01:10 +0200)]
xsk: Proxy pool management for leased queues
Similarly to the netif_mp_{open,close}_rxq handling for leased queues, proxy
the xsk_{reg,clear}_pool_at_qid via netif_get_rx_queue_lease_locked such
that in case a virtual netdev picked a leased rxq, the request gets through
to the real rxq in the physical netdev. The proxying is only relevant for
queue_id < dev->real_num_rx_queues since right now it's only supported for
rxqs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-10-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Thu, 2 Apr 2026 23:10:25 +0000 (01:10 +0200)]
xsk: Extend xsk_rcv_check validation
xsk_rcv_check tests for inbound packets to see whether they match
the bound AF_XDP socket. Refactor the test into a small helper
xsk_dev_queue_valid and move the validation against xs->dev and
xs->queue_id there.
The fast-path case stays in place and allows for quick return in
xsk_dev_queue_valid. If it fails, the validation is extended to
check whether the AF_XDP socket is bound against a leased queue,
and if so, the test is redone.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-9-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei [Thu, 2 Apr 2026 23:10:24 +0000 (01:10 +0200)]
net: Proxy netdev_queue_get_dma_dev for leased queues
Extend netdev_queue_get_dma_dev to return the physical device of the
real rxq for DMA in case the queue was leased. This allows memory
providers like io_uring zero-copy or devmem to bind to the physically
leased rxq via virtual devices such as netkit.
Signed-off-by: David Wei <dw@davidwei.uk> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-8-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei [Thu, 2 Apr 2026 23:10:23 +0000 (01:10 +0200)]
net: Proxy netif_mp_{open,close}_rxq for leased queues
When a process in a container wants to setup a memory provider, it will
use the virtual netdev and a leased rxq, and call netif_mp_{open,close}_rxq
to try and restart the queue. At this point, proxy the queue restart on
the real rxq in the physical netdev.
For memory providers (io_uring zero-copy rx and devmem), it causes the
real rxq in the physical netdev to be filled from a memory provider that
has DMA mapped memory from a process within a container.
Signed-off-by: David Wei <dw@davidwei.uk> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-7-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Thu, 2 Apr 2026 23:10:22 +0000 (01:10 +0200)]
net: Slightly simplify net_mp_{open,close}_rxq
net_mp_open_rxq is currently not used in the tree as all callers are
using __net_mp_open_rxq directly, and net_mp_close_rxq is only used
once while all other locations use __net_mp_close_rxq.
Consolidate into a single API, netif_mp_{open,close}_rxq, using the
netif_ prefix to indicate that the caller is responsible for locking.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-6-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Thu, 2 Apr 2026 23:10:21 +0000 (01:10 +0200)]
net, ethtool: Disallow leased real rxqs to be resized
Similar to AF_XDP, do not allow queues in a physical netdev to be resized
by ethtool -L when they are leased. Cover channel resize paths (both
netlink and ioctl) to reject resizing when the queues would be affected.
Given we need to have different checks for RX vs TX, detangle the code into
a two-loop version rather than the range of new_combined + min(new_rx, new_tx)
to old_combined + max(old_rx, old_tx).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-5-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Thu, 2 Apr 2026 23:10:20 +0000 (01:10 +0200)]
net: Add lease info to queue-get response
Populate nested lease info to the queue-get response that returns the
ifindex, queue id with type and optionally netns id if the device
resides in a different netns.
Example with ynl client when using AF_XDP via queue leasing:
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp/id:24 qdisc mq state UP group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
inet6 fe80::eaeb:d3ff:fea3:43f6/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ip netns exec foo ip a
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet6 fe80::200:ff:fe00:0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ip netns exec foo ethtool -i nk
driver: netkit
[...]
# ip netns exec foo ls /sys/class/net/nk/queues/
rx-0 rx-1 tx-0
Note that the caller of netdev_nl_queue_fill_one() holds the netdevice
lock. For the queue-get we do not lock both devices. When queues get
{un,}leased, both devices are locked, thus if __netif_get_rx_queue_lease()
returns a lease pointer, it points to a valid device. The netns-id is
fetched via peernet2id_alloc() similarly as done in OVS.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-4-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260402231031.447597-3-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Thu, 2 Apr 2026 23:10:18 +0000 (01:10 +0200)]
net: Add queue-create operation
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel") 78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()") d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Merge tag 'net-7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, IPsec and wireless. This is again
considerably bigger than the old average. No known outstanding
regressions.
Current release - regressions:
- net: increase IP_TUNNEL_RECURSION_LIMIT to 5
- eth: ice: fix PTP timestamping broken by SyncE code on E825C
Current release - new code bugs:
- eth: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure
Previous releases - regressions:
- core: fix cross-cache free of KFENCE-allocated skb head
- sched: act_csum: validate nested VLAN headers
- rxrpc: fix call removal to use RCU safe deletion
- xfrm:
- wait for RCU readers during policy netns exit
- fix refcount leak in xfrm_migrate_policy_find
- wifi: rt2x00usb: fix devres lifetime
- mptcp: fix slab-use-after-free in __inet_lookup_established
- ipvs: fix NULL deref in ip_vs_add_service error path
- eth:
- airoha: fix memory leak in airoha_qdma_rx_process()
- lan966x: fix use-after-free and leak in lan966x_fdma_reload()
Previous releases - always broken:
- ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group
dump
- bridge: guard local VLAN-0 FDB helpers against NULL vlan group
- xsk: tailroom reservation and MTU validation
- rxrpc:
- fix to request an ack if window is limited
- fix RESPONSE authenticator parser OOB read
- netfilter: nft_ct: fix use-after-free in timeout object destroy
- batman-adv: hold claim backbone gateways by reference
- eth:
- stmmac: fix PTP ref clock for Tegra234
- idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
- ipa: fix GENERIC_CMD register field masks for IPA v5.0+"
* tag 'net-7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (104 commits)
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
net: lan966x: fix page pool leak in error paths
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
nfc: pn533: allocate rx skb before consuming bytes
l2tp: Drop large packets with UDP encap
net: ipa: fix event ring index not programmed for IPA v5.0+
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
MAINTAINERS: Add Prashanth as additional maintainer for amd-xgbe driver
devlink: Fix incorrect skb socket family dumping
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Revert "mptcp: add needs_id for netlink appending addr"
mptcp: fix slab-use-after-free in __inet_lookup_established
net: txgbe: leave space for null terminators on property_entry
net: ioam6: fix OOB and missing lock
rxrpc: proc: size address buffers for %pISpc output
rxrpc: only handle RESPONSE during service challenge
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
rxrpc: Fix integer overflow in rxgk_verify_response()
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
...
Merge tag 'iommu-fixes-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull IOMMU fix from Will Deacon:
- Fix regression introduced by the empty MMU gather fix in -rc7, where
the ->iotlb_sync() callback can be elided incorrectly, resulting in
boot failures (hangs), crashes and potential memory corruption.
* tag 'iommu-fixes-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Ensure .iotlb_sync is called correctly
Merge tag 'platform-drivers-x86-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
- asus-armoury: Add support for FA607NU, GU605MU, and GV302XU.
- intel-uncore-freq: Handle autonomous UFS status bit
- ISST: Handle cases with less than max buckets correctly
- intel-uncore-freq & ISST: Mark minor version 3 supported (no
additional driver changes required)
* tag 'platform-drivers-x86-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-armoury: add support for GU605MU
platform/x86: asus-armoury: add support for FA607NU
platform/x86: asus-armoury: add support for GV302XU
platform/x86/amd: pmc: Add Thinkpad L14 Gen3 to quirk_s2idle_bug
platform/x86/intel-uncore-freq: Increase minor version
platform/x86: ISST: Increase minor version
platform/x86/intel-uncore-freq: Handle autonomous UFS status bit
platform/x86: ISST: Reset core count to 0
====================
net: lan966x: fix page_pool error handling and error paths
This series fixes error handling around the lan966x page pool:
1/3 adds the missing IS_ERR check after page_pool_create(), preventing
a kernel oops when the error pointer flows into
xdp_rxq_info_reg_mem_model().
2/3 plugs page pool leaks in the lan966x_fdma_rx_alloc() and
lan966x_fdma_init() error paths, now reachable after 1/3.
3/3 fixes a use-after-free and page pool leak in the
lan966x_fdma_reload() restore path, where the hardware could
resume DMA into pages already returned to the page pool.
====================
David Carlier [Sun, 5 Apr 2026 05:52:41 +0000 (06:52 +0100)]
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path.
Fixes: 89ba464fcf54 ("net: lan966x: refactor buffer reload function") Cc: stable@vger.kernel.org Signed-off-by: David Carlier <devnexen@gmail.com> Link: https://patch.msgid.link/20260405055241.35767-4-devnexen@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Carlier [Sun, 5 Apr 2026 05:52:40 +0000 (06:52 +0100)]
net: lan966x: fix page pool leak in error paths
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths.
David Carlier [Sun, 5 Apr 2026 05:52:39 +0000 (06:52 +0100)]
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
page_pool_create() can return an ERR_PTR on failure. The return value
is used unconditionally in the loop that follows, passing the error
pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),
which dereferences it, causing a kernel oops.
Add an IS_ERR check after page_pool_create() to return early on failure.
Robin Murphy [Wed, 8 Apr 2026 14:40:57 +0000 (15:40 +0100)]
iommu: Ensure .iotlb_sync is called correctly
Many drivers have no reason to use the iotlb_gather mechanism, but do
still depend on .iotlb_sync being called to properly complete an unmap.
Since the core code is now relying on the gather to detect when there
is legitimately something to sync, it should also take care of encoding
a successful unmap when the driver does not touch the gather itself.
Fixes: 90c5def10bea ("iommu: Do not call drivers for empty gathers") Reported-by: Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/r/8800a38b-8515-4bbe-af15-0dae81274bf7@nvidia.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Will Deacon <will@kernel.org>
nfc: pn533: allocate rx skb before consuming bytes
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
====================
r8152: Add support for the RTL8157 5Gbit USB Ethernet chip
Add support for the RTL8157, which is a 5GBit USB-Ethernet adapter
chip in the RTL815x family of chips.
The RTL8157 uses a different frame descriptor format, and different
SRAM/ADV access methods, plus offers 5GBit/s Ethernet, so support for these
features is added in addition to chip initialization and configuration.
The module was tested with an OEM RTL8157 USB adapter:
[25758.328238] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[25758.345565] usb 4-1: New USB device found, idVendor=0bda, idProduct=8157, bcdDevice=30.00
[25758.345585] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[25758.345593] usb 4-1: Product: USB 10/100/1G/2.5G/5G LAN
[25758.345599] usb 4-1: Manufacturer: Realtek
[25758.345605] usb 4-1: SerialNumber: 000300E04C68xxxx
[25758.534241] r8152-cfgselector 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[25758.603511] r8152 4-1:1.0: skip request firmware
[25758.653351] r8152 4-1:1.0 eth0: v1.12.13
[25758.689271] r8152 4-1:1.0 enx00e04c68xxxx: renamed from eth0
[25763.271682] r8152 4-1:1.0 enx00e04c68xxxx: carrier on
The RTL8157 adapter was tested against an AQC107 PCIe-card supporting
10GBit/s and an RTL8126 5Gbit PCIe-card supporting 5GBit/s for
performance, link speed and EEE negotiation. Using USB3.2 Gen 1 with
the RTL8157 USB adapter and running iperf3 against the AQC107 PCIe
card resulted in 3.47 Gbits/sec, whereas using USB3.2 Gen2 resulted
in 4.70 Gbits/sec, speeds against the RTL8126-card were the same.
As the code integrates the RTL8157-specific code with existing RTL8156 code
in order to improve code maintainability (instead of adding RTL8157-specific
functions duplicaing most of the RTL8156 code), regression tests were done
with an Edimax EU-4307 V1.0 USB-Ethernet adapter with RTL8156.
The code is based on the out-of-tree r8152 driver published by Realtek under
the GPL.
This patch is on top of linux-next as the code re-uses the 2.5 Gbit EEE
recently added in r8152.c.
The RTL8157 uses a different packet descriptor format compared to the
previous generation of chips. Add support for this format by adding a
descriptor format structure into the r8152 structure and corresponding
desc_ops functions which abstract the vlan-tag, tx/rx len and
tx/rx checksum algorithms.
Also, add support for the ADV indirect access interface of the RTL8157
and PHY setup.
For initialization of the RTL8157, combine the existing RTL8156B and
RTL8156 init functions and add RTL8157-specific functinality in order
to improve code readability and maintainability.
r8156_init() is now called with RTL_VER_10 and RTL_VER_11 for the RTL8156,
with RTL_VER_12, RTL_VER_13 and RTL_VER_15 for the RTL8156B and with
RTL_VER_16 for the RTL8157 and checks the version for chip-specific code.
Also add USB power control functions for the RTL8157.
Add support for the USB device ID of Realtek RTL8157-based adapters. Detect
the RTL8157 as RTL_VER_16 and set it up.
The RTL8157 supports 5GBit Link speeds. Add support for this speed
in the setup and setting/getting through ethtool. Also add 5GBit EEE.
Add functionality for setup and ethtool get/set methods.
syzbot reported a WARN on my patch series [1]. The actual issue is an
overflow of 16-bit UDP length field, and it exists in the upstream code.
My series added a debug WARN with an overflow check that exposed the
issue, that's why syzbot tripped on my patches, rather than on upstream
code.
It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP
encapsulation, and l2tp_xmit_core doesn't check for overflows when it
assigns the UDP length field. The value gets trimmed to 16 bites.
Add an overflow check that drops oversized packets and avoids sending
packets with trimmed UDP length to the wire.
net: ipa: fix event ring index not programmed for IPA v5.0+
For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to
CH_C_CNTXT_1. The v5.0 register definition intended to define this
field in the CH_C_CNTXT_1 fmask array but used the old identifier of
ERINDEX instead of CH_ERINDEX.
Without a valid event ring, GSI channels could never signal transfer
completions. This caused gsi_channel_trans_quiesce() to block
forever in wait_for_completion().
At least for IPA v5.2 this resolves an issue seen where runtime
suspend, system suspend, and remoteproc stop all hanged forever. It
also meant the IPA data path was completely non functional.
Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alexander Koskovich <akoskovich@pm.me> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260403-milos-ipa-v1-2-01e9e4e03d3e@fairphone.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Emil converts to use spinlock_t for virtchnl transactions to make
consistent use of the xn_bm_lock when accessing the free_xn_bm bitmap,
while also avoiding nested raw/bh spinlock issue on PREEMPT_RT kernels.
He also sets payload size before calling the async handler, to make sure
it doesn't error out prematurely due to invalid size check for idpf.
Kohei Enju changes WARN_ON for missing PTP control PF to a dev_info() on
ice as there are cases where this is expected and acceptable.
Petr Oros fixes conditions in which error paths failed to call
ice_ptp_port_phy_restart() breaking PTP functionality on ice.
Alex significantly reduces reporting of driver information, and time
under RTNL locl, on ixgbe e610 devices by reducing reads of flash info
only on events that could change it.
Michal Schmidt adds missing Hyper-V op on ixgbevf.
Alex Dvoretsky removes call to napi_synchronize() in igb_down() to
resolve a deadlock.
Agalakov Daniil adds error check on e1000 for failed EEPROM read.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: check return value of e1000_read_eeprom
igb: remove napi_synchronize() in igb_down()
ixgbevf: add missing negotiate_features op to Hyper-V ops table
ixgbe: stop re-reading flash on every get_drvinfo for e610
ice: fix PTP timestamping broken by SyncE code on E825C
ice: ptp: don't WARN when controlling PF is unavailable
idpf: set the payload size before calling the async handler
idpf: improve locking around idpf_vc_xn_push_free()
idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
====================
====================
devlink: add per-port resource support
This series by Or adds devlink per-port resource support:
Currently, devlink resources are only available at the device level.
However, some resources are inherently per-port, such as the maximum
number of subfunctions (SFs) that can be created on a specific PF port.
This limitation prevents user space from obtaining accurate per-port
capacity information.
This series adds infrastructure for per-port resources in devlink core
and implements it in the mlx5 driver to expose the max_SFs resource
on PF devlink ports.
Patch #1 refactors resource functions to be generic
Patch #2 adds port-level resource registration infrastructure
Patch #3 registers SF resource on PF port representor in mlx5
Patch #4 adds devlink port resource registration to netdevsim for testing
Patch #5 adds dump support for device-level resources
Patch #6 includes port resources in the resource dump dumpit path
Patch #7 adds port-specific option to resource dump doit path
Patch #8 adds selftest for devlink port resource doit
Patch #9 documents port-level resources and full dump
Patch #10 adds resource scope filtering to resource dump
Patch #11 adds selftest for resource dump and scope filter
Patch #12 documents resource scope filtering
====================
Or Har-Toov [Tue, 7 Apr 2026 19:41:06 +0000 (22:41 +0300)]
selftest: netdevsim: Add resource dump and scope filter test
Add resource_dump_test() which verifies dumping resources for all
devices and ports, and tests that scope=dev returns only device-level
resources and scope=port returns only port resources.
Skip if userspace does not support the scope parameter.
Or Har-Toov [Tue, 7 Apr 2026 19:41:05 +0000 (22:41 +0300)]
devlink: Add resource scope filtering to resource dump
Allow filtering the resource dump to device-level or port-level
resources using the 'scope' option.
Example - dump only device-level resources:
$ devlink resource show scope dev
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
Example - dump only port-level resources:
$ devlink resource show scope port
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
Or Har-Toov [Tue, 7 Apr 2026 19:41:02 +0000 (22:41 +0300)]
devlink: Add port-specific option to resource dump doit
Allow querying devlink resources per-port via the resource-dump doit
handler. When a port-index attribute is provided, only that port's
resources are returned. When no port-index is given, only device-level
resources are returned, preserving backward compatibility.
Or Har-Toov [Tue, 7 Apr 2026 19:41:01 +0000 (22:41 +0300)]
devlink: Include port resources in resource dump dumpit
Allow querying devlink resources per-port via the resource-dump dumpit
handler. Both device-level and all ports resources are included in the
reply.
For example:
$ devlink resource show
pci/0000:03:00.0:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
pci/0000:03:00.0/196608:
name max_SFs size 20 unit entry
pci/0000:03:00.1:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
pci/0000:03:00.1/262144:
name max_SFs size 20 unit entry
Or Har-Toov [Tue, 7 Apr 2026 19:41:00 +0000 (22:41 +0300)]
devlink: Add dump support for device-level resources
Add dumpit handler for resource-dump command to iterate over all devlink
devices and show their resources.
$ devlink resource show
pci/0000:08:00.0:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
pci/0000:08:00.1:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
Or Har-Toov [Tue, 7 Apr 2026 19:40:58 +0000 (22:40 +0300)]
net/mlx5: Register SF resource on PF port representor
The device-level "resource show" displays max_local_SFs and
max_external_SFs without indicating which port each resource belongs
to. Users cannot determine the controller number and pfnum associated
with each SF pool.
Register max_SFs resource on the host PF representor port to expose
per-port SF limits. Users can correlate the port resource with the
controller number and pfnum shown in 'devlink port show'.
Future patches will introduce an ECPF that manages multiple PFs,
where each PF has its own SF pool.
Example usage:
$ devlink resource show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608:
name max_SFs size 20 unit entry
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev pf0hpf flavour pcipf
controller 1 pfnum 0 external true splittable false
function:
hw_addr b8:3f:d2:e1:8f:dc roce enable max_io_eqs 120
We can create up to 20 SFs over devlink port pci/0000:03:00.0/196608,
with pfnum 0 and controller 1.
The current devlink resource infrastructure supports only device-level
resources. Some hardware resources are associated with specific ports
rather than the entire device, and today we have no way to show resource
per-port.
Add support for registering resources at the port level.
Or Har-Toov [Tue, 7 Apr 2026 19:40:56 +0000 (22:40 +0300)]
devlink: Refactor resource functions to be generic
Currently the resource functions take devlink pointer as parameter
and take the resource list from there.
Allow resource functions to work with other resource lists that will
be added in next patches and not only with the devlink's resource list.
# NETIF=eth0 python3 xdp.py
TAP version 13
1..1
# CMD: ip link set dev eth0 xdpdrv obj /path/to/tools/testing/selftests/net/lib/xdp_dummy.bpf.o sec xdp.frags
# EXIT: 2
# STDERR: RTNETLINK answers: Invalid argument
ok 1 xdp.test_xdp_native_update_mb_to_sb # SKIP device does not support multi-buffer XDP
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
====================
dsa_loop and platform_data cleanups
While working to add some new features to dsa_loop, I gathered a number
of cleanup patches. They mostly remove some data structures that became
unused after the multi-switch platforms were migrated to the modern DT
bindings.
====================
Li RongQing [Tue, 7 Apr 2026 02:27:30 +0000 (22:27 -0400)]
devlink: Fix incorrect skb socket family dumping
The devlink_fmsg_dump_skb function was incorrectly using the socket
type (sk->sk_type) instead of the socket family (sk->sk_family)
when filling the "family" field in the fast message dump.
This patch fixes this to properly display the socket family.
Jiexun Wang [Tue, 7 Apr 2026 08:00:14 +0000 (16:00 +0800)]
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Exact UNIX diag lookups hold a reference to the socket, but not to
u->path. Meanwhile, unix_release_sock() clears u->path under
unix_state_lock() and drops the path reference after unlocking.
Read the inode and device numbers for UNIX_DIAG_VFS while holding
unix_state_lock(), then emit the netlink attribute after dropping the
lock.
This keeps the VFS data stable while the reply is being built.
Fixes: 5f7b0569460b ("unix_diag: Unix inode info NLA") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260407080015.1744197-1-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 9 Apr 2026 02:32:05 +0000 (19:32 -0700)]
Merge branch 'mptcp-autotune-related-improvement'
Matthieu Baerts says:
====================
mptcp: autotune related improvement
Here are two patches from Paolo that have been crafted a couple of
months ago, but needed more validation because they were indirectly
causing instabilities in the sefltests. The root cause has been fixed in
'net' recently in commit 8c09412e584d ("selftests: mptcp: more stable
simult_flows tests").
These patches refactor the receive space and RTT estimator, overall
making DRS more correct while avoiding receive buffer drifting to
tcp_rmem[2], which in turn makes the throughput more stable and less
bursty, especially with high bandwidth and low delay environments.
Note that the first patch addresses a very old issue. 'net-next' is
targeted because the change is quite invasive and based on a recent
backlog refactor. The 'Fixes' tag is then there more as a FYI, because
backporting this patch will quickly be blocked due to large conflicts.
====================
Paolo Abeni [Tue, 7 Apr 2026 08:45:17 +0000 (10:45 +0200)]
mptcp: better mptcp-level RTT estimator
The current MPTCP-level RTT estimator has several issues. On high speed
links, the MPTCP-level receive buffer auto-tuning happens with a
frequency well above the TCP-level's one. That in turn can cause
excessive/unneeded receive buffer increase.
On such links, the initial rtt_us value is considerably higher than the
actual delay, and the current mptcp_rcv_space_adjust() updates
msk->rcvq_space.rtt_us with a period equal to the such field previous
value. If the initial rtt_us is 40ms, its first update will happen after
40ms, even if the subflows see actual RTT orders of magnitude lower.
Additionally:
- setting the msk RTT to the maximum among all the subflows RTTs makes
DRS constantly overshooting the rcvbuf size when a subflow has
considerable higher latency than the other(s).
- during unidirectional bulk transfers with multiple active subflows,
the TCP-level RTT estimator occasionally sees considerably higher
value than the real link delay, i.e. when the packet scheduler reacts
to an incoming ACK on given subflow pushing data on a different
subflow.
- currently inactive but still open subflows (i.e. switched to backup
mode) are always considered when computing the msk-level RTT.
Address the all the issues above with a more accurate RTT estimation
strategy: the MPTCP-level RTT is set to the minimum of all the subflows
actually feeding data into the MPTCP receive buffer, using a small
sliding window.
While at it, also use EWMA to compute the msk-level scaling_ratio, to
that MPTCP can avoid traversing the subflow list is
mptcp_rcv_space_adjust().
Use some care to avoid updating msk and ssk level fields too often.
Fixes: a6b118febbab ("mptcp: add receive buffer auto-tuning") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260407-net-next-mptcp-reduce-rbuf-v2-1-0d1d135bf6f6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert "mptcp: add needs_id for netlink appending addr"
This commit was originally adding the ability to add MPTCP endpoints
with ID 0 by accident. The in-kernel PM, handling MPTCP endpoints at the
net namespace level, is not supposed to handle endpoints with such ID,
because this ID 0 is reserved to the initial subflow, as mentioned in
the MPTCPv1 protocol [1], a per-connection setting.
Note that 'ip mptcp endpoint add id 0' stops early with an error, but
other tools might still request the in-kernel PM to create MPTCP
endpoints with this restricted ID 0.
In other words, it was wrong to call the mptcp_pm_has_addr_attr_id
helper to check whether the address ID attribute is set: if it was set
to 0, a new MPTCP endpoint would be created with ID 0, which is not
expected, and might cause various issues later.
mptcp: fix slab-use-after-free in __inet_lookup_established
The ehash table lookups are lockless and rely on
SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability
during RCU read-side critical sections. Both tcp_prot and
tcpv6_prot have their slab caches created with this flag
via proto_register().
However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into
tcpv6_prot_override during inet_init() (fs_initcall, level 5),
before inet6_init() (module_init/device_initcall, level 6) has
called proto_register(&tcpv6_prot). At that point,
tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab
remains NULL permanently.
This causes MPTCP v6 subflow child sockets to be allocated via
kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab
cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so
when these sockets are freed without SOCK_RCU_FREE (which is
cleared for child sockets by design), the memory can be
immediately reused. Concurrent ehash lookups under
rcu_read_lock can then access freed memory, triggering a
slab-use-after-free in __inet_lookup_established.
Fix this by splitting the IPv6-specific initialization out of
mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called
from mptcp_proto_v6_init() before protocol registration. This
ensures tcpv6_prot_override.slab correctly inherits the
SLAB_TYPESAFE_BY_RCU slab cache.
sk_clone() initializes sk_tx_queue_mapping via sk_tx_queue_clear()
but does not initialize sk_rx_queue_mapping. Since this field is in
the sk_dontcopy region, it is neither copied from the parent socket
by sock_copy() nor zeroed by sk_prot_alloc() (called without
__GFP_ZERO from sk_clone).
Commit 03cfda4fa6ea ("tcp: fix another uninit-value
(sk_rx_queue_mapping)") attempted to fix this by introducing
sk_mark_napi_id_set() with force_set=true in tcp_child_process().
However, sk_mark_napi_id_set() -> sk_rx_queue_set() only writes
when skb_rx_queue_recorded(skb) is true. If the 3-way handshake
ACK arrives through a device that does not record rx_queue (e.g.
loopback or veth), sk_rx_queue_mapping remains uninitialized.
When a subsequent data packet arrives with a recorded rx_queue,
sk_mark_napi_id() -> sk_rx_queue_update() reads the uninitialized
field for comparison (force_set=false path), triggering KMSAN.
This was reproduced by establishing a TCP connection over loopback
(which does not call skb_record_rx_queue), then attaching a BPF TC
program on lo ingress to set skb->queue_mapping on data packets:
selftests: forwarding: lib: rewrite processing of command line arguments
The piece of code which processes the command line arguments and
populates NETIFS based on them is really unobvious. Rewrite it so that
the intention is clear and the code is easy to follow.
net: phy: realtek: get rid of magic numbers in rtl8201_config_intr()
Replace the magic numbers with defines. Register names were obtained from
publicly available documentation[1]. This should make it clear what's going
on in the code.
1. RTL8201F/RTL8201FL/RTL8201FN Rev. 1.4 Datasheet Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Nicolai Buchwitz nb@tipi-net.de Link: https://patch.msgid.link/20260406201222.1043396-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: txgbe: leave space for null terminators on property_entry
Lists of struct property_entry are supposed to be terminated with an
empty property, this driver currently seems to be allocating exactly the
amount of entry used.
Change the struct definition to leave an extra element for all
property_entry.
Fixes: c3e382ad6d15 ("net: txgbe: Add software nodes to support phylink") Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Tested-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20260405222013.5347-1-fabio.baltieri@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here.
Fixes: b63c5478e9cb ("ipv6: ioam: Support for Queue depth data field") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20260403214418.2233266-2-kuba@kernel.org/ Signed-off-by: Justin Iurman <justin.iurman@gmail.com> Link: https://patch.msgid.link/20260404134137.24553-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiang Mei [Sat, 4 Apr 2026 22:04:12 +0000 (15:04 -0700)]
bonding: remove unused bond_is_first_slave and bond_is_last_slave macros
Since commit 2884bf72fb8f ("net: bonding: fix use-after-free in
bond_xmit_broadcast()"), bond_is_last_slave() was only used in
bond_xmit_broadcast(). After the recent fix replaced that usage with
a simple index comparison, bond_is_last_slave() has no remaining
callers. bond_is_first_slave() likewise has no callers.
Jakub Kicinski [Thu, 9 Apr 2026 01:58:08 +0000 (18:58 -0700)]
Merge tag 'nf-next-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Fix ancient sparse warnings in nf conntrack nat modules, from
Sun Jian.
2) Fix typo in enum description, from Jelle van der Waa.
3) remove redundant refetch of netns pointer in nf_conntrack_sip.
4) add a deprecation warning for dccp match.
We can extend the deadline later if needed, but plan atm is to
remove the feature.
5) remove nf_conntrack_h323 debug code that can read out-of-bounds
with malformed messages. This code was commented out, but better
remove this.
6+7) add more netlink policy validations in netfilter.
This could theoretically cause issues when a client sends e.g.
unsupported feature flags that were previously ignored, so we
may have to relax some changes. For now, try to be stricter and
reject upfront.
8+9) minor code cleanup in nft_set_pipapo (an nftables set backend).
10) Add nftables matching support fro double-tagged vlan and pppoe
frames, from Pablo Neira Ayuso.
11) Fix up indentation of debug messages in nf_conntrack_h323 conntrack
helper, from David Laight.
12) Add a helper to iterate to next flow action and bail out if the
maximum number of actions is reached, also from Pablo.
* tag 'nf-next-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables_offload: add nft_flow_action_entry_next() and use it
netfilter: nf_conntrack_h323: Correct indentation when H323_TRACE defined
netfilter: nft_meta: add double-tagged vlan and pppoe support
netfilter: nft_set_pipapo_avx2: remove redundant loop in lookup_slow
netfilter: nft_set_pipapo: increment data in one step
netfilter: nf_tables: add netlink policy based cap on registers
netfilter: add more netlink-based policy range checks
netfilter: nf_conntrack_h323: remove unreliable debug code in decode_octstr
netfilter: add deprecation warning for dccp support
netfilter: nf_conntrack_sip: remove net variable shadowing
netfilter: nf_tables: Fix typo in enum description
netfilter: use function typedefs for __rcu NAT helper hook pointers
====================
Jakub Kicinski [Thu, 9 Apr 2026 01:56:17 +0000 (18:56 -0700)]
Merge tag 'wireless-2026-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A few last-minute fixes:
- rfkill: prevent boundless event list
- rt2x00: fix USB resource management
- brcmfmac: validate firmware IDs
- brcmsmac: fix DMA free size
* tag 'wireless-2026-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
net: rfkill: prevent unlimited numbers of rfkill events from being created
wifi: rt2x00usb: fix devres lifetime
wifi: brcmfmac: validate bsscfg indices in IF events
wifi: brcmsmac: Fix dma_free_coherent() size
====================
1) Clear trailing padding in build_polexpire() to prevent
leaking unititialized memory. From Yasuaki Torimaru.
2) Fix aevent size calculation when XFRMA_IF_ID is used.
From Keenan Dong.
3) Wait for RCU readers during policy netns exit before
freeing the policy hash tables.
4) Fix dome too eaerly dropped references on the netdev
when uding transport mode. From Qi Tang.
5) Fix refcount leak in xfrm_migrate_policy_find().
From Kotlyarov Mihail.
6) Fix two fix info leaks in build_report() and
in build_mapping(). From Greg Kroah-Hartman.
7) Zero aligned sockaddr tail in PF_KEY exports.
From Zhengchuan Liang.
* tag 'ipsec-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
xfrm_user: fix info leak in build_report()
xfrm_user: fix info leak in build_mapping()
xfrm: fix refcount leak in xfrm_migrate_policy_find
xfrm: hold dev ref until after transport_finish NF_HOOK
xfrm: Wait for RCU readers during policy netns exit
xfrm: account XFRMA_IF_ID in aevent size calculation
xfrm: clear trailing padding in build_polexpire()
====================
projects / thirdparty / kernel / linux.git / log
