Adam Crosser [Tue, 17 Mar 2026 12:25:28 +0000 (19:25 +0700)]
gpib: fix use-after-free in IO ioctl handlers
The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor
pointer after board->big_gpib_mutex has been released. A concurrent
IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during
this window, causing a use-after-free.
The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly
release big_gpib_mutex before calling their handler. wait_ioctl() is
called with big_gpib_mutex held, but ibwait() releases it internally
when wait_mask is non-zero. In all four cases, the descriptor pointer
obtained from handle_to_descriptor() becomes unprotected.
Fix this by introducing a kernel-only descriptor_busy reference count
in struct gpib_descriptor. Each handler atomically increments
descriptor_busy under file_priv->descriptors_mutex before releasing the
lock, and decrements it when done. close_dev_ioctl() checks
descriptor_busy under the same lock and rejects the close with -EBUSY
if the count is non-zero.
A reference count rather than a simple flag is necessary because
multiple handlers can operate on the same descriptor concurrently
(e.g. IBRD and IBWAIT on the same handle from different threads).
A separate counter is needed because io_in_progress can be cleared from
unprivileged userspace via the IBWAIT ioctl (through general_ibstatus()
with set_mask containing CMPL), which would allow an attacker to bypass
a check based solely on io_in_progress. The new descriptor_busy
counter is only modified by the kernel IO paths.
The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex)
and the handlers only hold descriptors_mutex briefly during the lookup,
so there is no deadlock risk and no impact on IO throughput.
Signed-off-by: Adam Crosser <adam.crosser@praetorian.com> Cc: stable <stable@kernel.org> Reviewed-by: Dave Penkler <dpenkler@gmail.com> Tested-by: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 10 Mar 2026 10:51:27 +0000 (11:51 +0100)]
gpib: lpvo_usb: fix memory leak on disconnect
The driver iterates over the registered USB interfaces during GPIB
attach and takes a reference to their USB devices until a match is
found. These references are never released which leads to a memory leak
when devices are disconnected.
Fix the leak by dropping the unnecessary references.
Fixes: fce79512a96a ("staging: gpib: Add LPVO DIY USB GPIB driver") Cc: stable <stable@kernel.org> # 6.13 Cc: Dave Penkler <dpenkler@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260310105127.17538-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Penkler [Mon, 2 Feb 2026 09:47:55 +0000 (10:47 +0100)]
gpib: Fix fluke driver s390 compile issue
The following errors were reported for a s390 randconfig build
of the fluke gpib driver:
>> drivers/gpib/eastwood/fluke_gpib.c:1002:23: error: call to undeclared function 'ioremap'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1002 | nec_priv->mmiobase = ioremap(e_priv->gpib_iomem_res->start,
| ^
>> drivers/gpib/eastwood/fluke_gpib.c:1002:21: error: incompatible integer to pointer conversion assigning to 'void *' from 'int' [-Wint-conversion]
1002 | nec_priv->mmiobase = ioremap(e_priv->gpib_iomem_res->start,
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1003 | resource_size(e_priv->gpib_iomem_res));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpib/eastwood/fluke_gpib.c:1036:33: error: incompatible integer to pointer conversion assigning to 'void *' from 'int' [-Wint-conversion]
1036 | e_priv->write_transfer_counter = ioremap(e_priv->write_transfer_counter_res->start,
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1037 | resource_size(e_priv->write_transfer_counter_res));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add HAS_IOMEM dependency to Kconfig for fluke driver option
Merge tag 'counter-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 7.0
Two fixes for rz-mut3-cnt: synchronize runtime PM usage count to toggle
state of the counter, and set counter->parent during probe to ensure the
current dev pointer is accessed during driver operation.
* tag 'counter-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member
counter: rz-mtu3-cnt: prevent counter from being toggled multiple times
Ard Biesheuvel [Thu, 26 Mar 2026 18:04:36 +0000 (19:04 +0100)]
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
The lis3lv02d started triggering a WARN in the IRQ code because it
passes IRQF_ONESHOT to request_threaded_irq() even when thread_fn is
NULL, which is an invalid combination.
Randy Dunlap [Thu, 12 Mar 2026 05:14:00 +0000 (22:14 -0700)]
lis3lv02d: fix kernel-doc warnings
Use the correct kernel-doc format to avoid kernel-doc warnings:
Warning: include/linux/lis3lv02d.h:125 struct member 'st_min_limits' not
described in 'lis3lv02d_platform_data'
Warning: include/linux/lis3lv02d.h:125 struct member 'st_max_limits' not
described in 'lis3lv02d_platform_data'
misc/mei: INTEL_MEI should depend on X86 or DRM_XE
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
After commit 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
some devices started to show long resume times (5-7 seconds).
This happens as mei falsely detects unready hardware,
starts parallel link reset flow and triggers link reset timeouts
in the resume callback.
Address it by performing detection of unready hardware only
when driver is in the MEI_DEV_ENABLED state instead of blacklisting
states as done in the original patch.
This eliminates active waitqueue check as in MEI_DEV_ENABLED state
there will be no active waitqueue.
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221023 Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Fixes: 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260330083830.536056-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alice Ryhl [Sat, 14 Mar 2026 11:19:51 +0000 (11:19 +0000)]
rust_binder: use AssertSync for BINDER_VM_OPS
When declaring an immutable global variable in Rust, the compiler checks
that it looks thread safe, because it is generally safe to access said
global variable. When using C bindings types for these globals, we don't
really want this check, because it is conservative and assumes pointers
are not thread safe.
In the case of BINDER_VM_OPS, this is a challenge when combined with the
patch 'userfaultfd: introduce vm_uffd_ops' [1], which introduces a
pointer field to vm_operations_struct. It previously only held function
pointers, which are considered thread safe.
Rust Binder should not be assuming that vm_operations_struct contains no
pointer fields, so to fix this, use AssertSync (which Rust Binder has
already declared for another similar global of type struct
file_operations with the same problem). This ensures that even if
another commit adds a pointer field to vm_operations_struct, this does
not cause problems.
Merge tag 'iio-fixes-for-7.0c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 3rd set of fixes for the 7.0 cycle.
Note that this pull is in addition to the 2nd set of such fixes that are
waiting to be picked up. Absolutely fine to queue these for the merge
window if that makes more sense.
Usual mixed back of ancient issues surfacing and newer problems.
adi,ad57770r
- Stop eating an error in read_raw.
adi,adxl313
- Check return of regmap_write() instead of ignoring it in one place.
adi,adxl355
- Fix the description of the temperature channel to be unsigned rather
than signed.
bosch,bmi160
- Avoid use of uninitialized data.
- Fix validation of small reference voltages.
hid-sensor-rotation:
- The timestamp location in this driver has unfortunately been broken for
a long time. Given it was correct for 6 years and then broken for the
next 6 years, use a one off hack to duplicate it in both locations.
The issue was as a result of the unique nature of quaternion
representation combined with large precision resulting in an
128 bit aligned channel.
nxp,sar-adc
- Avoid leaking a dma channel.
rfdigital,rfd77402
- Close a race between reinit_completion() and the irq happening.
ti,adc161s626
- Fix up buffer handling on big endian hosts which was broken due to
casting of pointers to different sized integers.
- Ensure a DMA safe buffer is used.
vishay,vcnl4035
- Fix up buffer handling on big endian hosts which was broken due to
casting of pointers to different sized integers.
vishay,veml6070
- Fix return value mess up that occurred when doing a guard() conversion.
* tag 'iio-fixes-for-7.0c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: light: veml6070: fix veml6070_read() return value
iio: adc: nxp-sar-adc: Fix DMA channel leak in trigger mode
iio: accel: adxl313: add missing error check in predisable
iio: dac: ad5770r: fix error return in ad5770r_read_raw()
iio: accel: fix ADXL355 temperature signature value
iio: light: vcnl4035: fix scan buffer on big-endian
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
iio: adc: ti-adc161s626: fix buffer read on big-endian
iio: dac: mcp47feb02: Fix Vref validation [1-999] case
iio: imu: bmi160: Remove potential undefined behavior in bmi160_config_pin()
iio: orientation: hid-sensor-rotation: add timestamp hack to not break userspace
iio: proximity: rfd77402: Fix completion race condition in IRQ mode
Merge tag 'iio-fixes-for-7.0b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linux
Jonathan writes:
IIO: 2nd set of fixes for the 7.0 cycle
Usual mixed bag of fixes for recent code and much older issues that have
surfaced. Biggest group are continued resolution of IRQF_ONE_SHOT
being used incorrectly (which now triggers a warning)
adi,ad4062
- Replace IRQF_ONESHOT (as no threaded handler) with IRQF_NO_THREAD as
the caller makes use of iio_trigger_poll() which cannot run from a
thread.
adi,ade9000
- Move mutex_init() earlier to ensure it is available if spurious IRQ
occurs.
adi,adis16550
- Fix swapped gyro and accel filter functions.
adi,adxl3380
- Fix some bit manipulation that was always resulting in 0.
- Fix incorrect register map for calibbias on the active power channel.
- Fix returning IRQF_HANDLED from a function that should return 0 or
-ERRNO.
aspeed,adc
- Clear a reference voltage bit that might be set prior to driver load.
bosch,bno055
- Off by one channel buffer sizing. Benine due to padding prior to the
subsequent timestamp.
hid-sensors
- A more complex fix to IRQF_ONESHOT warning as this driver had a trigger
that was never actually used but the ABI that exposed had to be
maintained to avoid regressions.
hid-sensors-rotation
- An obscure buffer alignment case that applies to quaternions only was
recently broken resulting in writes beyond the end of the channel buffer.
Add a new core macro and apply it in this driver to make it very clear
what was going on.
honeywell,abp2030pa
- Remove meaningless IRQF_ONESHOT from a non threaded IRQ handler.
Warning fix only.
invense,mpu3050
- Fix token passed to free_irq() to match the one used at setup.
- Fix an irq resource leak in error path.
- Reorder probe so that userspace interfaces are exposed only after
everything else has finished.
- Reorder remove slightly to cleanup the buffer only after irq removed
ensuring reverse of probe sequence.
microchip,mcp47feb02
- Fix use of mutex before it was initialized by not performing unnecessary
lock that was early enough in probe that all code was serial.
st,lsm6dsx
- Ensure that FIFO ODR is only controllable for accel and gyro channels
avoiding incorrect register accesses.
- Restrict separation of buffer sampling from main sampling rate to
accelerometer. It is only useful for running event detection faster
than the fifo and the only events are on the accelerometer.
ti,ads1018
- Fix overflow of u8 which wasn't big enough to store max data rate value.
ti,ads1119:
- Fix unbalanced pm in an error path.
- IRQF_ONESHOT (as no threaded handler) replaced with IRQF_NO_THREAD
(needed for iio_trigger_poll()).
- Ensure complete reinitialized before reuse. Previously it would have
completed immediate after the first time.
ti,ads7950
- Fix return value of gpio_get() to be 0 or 1.
- Avoid accidental overwrite of state resulting in gpio_get() only
returning 0 or -ERRNO but never 1.
* tag 'iio-fixes-for-7.0b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (25 commits)
iio: imu: adis16550: fix swapped gyro/accel filter functions
iio: adc: aspeed: clear reference voltage bits before configuring vref
iio: adc: ti-ads1119: Reinit completion before wait_for_completion_timeout()
iio: adc: ti-ads1018: fix type overflow for data rate
iio: adc: ti-ads7950: do not clobber gpio state in ti_ads7950_get()
iio: adc: ti-ads7950: normalize return value of gpio_get
iio: orientation: hid-sensor-rotation: fix quaternion alignment
iio: add IIO_DECLARE_QUATERNION() macro
iio: adc: ti-ads1119: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: imu: bno055: fix BNO055_SCAN_CH_COUNT off by one
iio: hid-sensors: Use software trigger
iio: adc: ad4062: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: gyro: mpu3050: Fix out-of-sequence free_irq()
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio: gyro: mpu3050: Fix irq resource leak
iio: gyro: mpu3050: Fix incorrect free_irq() variable
iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only
iio: imu: st_lsm6dsx: Set FIFO ODR for accelerometer and gyroscope only
iio: dac: mcp47feb02: Fix mutex used before initialization
iio: adc: ade9000: fix wrong return type in streaming push
...
Merge tag 'icc-7.0-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
interconnect fix for v7.0-rc
This contains one driver fix for the current cycle.
- interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes()
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.0-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes()
Felix Gu [Sun, 22 Feb 2026 09:45:39 +0000 (17:45 +0800)]
iio: adc: nxp-sar-adc: Fix DMA channel leak in trigger mode
The DMA channel was requested in nxp_sar_adc_buffer_postenable() but
was only released in nxp_sar_adc_buffer_software_do_predisable().
This caused a DMA channel resource leak when operating in trigger mode.
Fix this by moving dma_request_chan() from
nxp_sar_adc_buffer_postenable() into
nxp_sar_adc_buffer_software_do_postenable(), ensuring the DMA channel
is only requested in software mode.
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Valek Andrej [Fri, 13 Mar 2026 09:24:13 +0000 (10:24 +0100)]
iio: accel: fix ADXL355 temperature signature value
Temperature was wrongly represented as 12-bit signed, confirmed by checking
the datasheet. Even if the temperature is negative, the value in the
register stays unsigned.
Fixes: 12ed27863ea3 iio: accel: Add driver support for ADXL355 Signed-off-by: Valek Andrej <andrej.v@skyrain.eu> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cosmin Tanislav [Fri, 30 Jan 2026 12:23:53 +0000 (14:23 +0200)]
counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member
The counter driver can use HW channels 1 and 2, while the PWM driver can
use HW channels 0, 1, 2, 3, 4, 6, 7.
The dev member is assigned both by the counter driver and the PWM driver
for channels 1 and 2, to their own struct device instance, overwriting
the previous value.
The sub-drivers race to assign their own struct device pointer to the
same struct rz_mtu3_channel's dev member.
The dev member of struct rz_mtu3_channel is used by the counter
sub-driver for runtime PM.
Depending on the probe order of the counter and PWM sub-drivers, the
dev member may point to the wrong struct device instance, causing the
counter sub-driver to do runtime PM actions on the wrong device.
To fix this, use the parent pointer of the counter, which is assigned
during probe to the correct struct device, not the struct device pointer
inside the shared struct rz_mtu3_channel.
At the same time, hardware registers end up being accessed with clocks
off in rz_mtu3_terminate_counter() to disable an already disabled
channel.
If user writes 1 to the sysfs enable file multiple times, runtime PM
usage count will be incremented each time, requiring the same number of
0 writes to get it back to 0.
If user writes 0 to the sysfs enable file while PWM is in progress, PWM
is stopped without counter being the owner of the underlying MTU3
channel.
Check against the cached count_is_enabled value and exit if the user
is trying to set the same enable value.
David Lechner [Sat, 14 Mar 2026 22:18:10 +0000 (17:18 -0500)]
iio: light: vcnl4035: fix scan buffer on big-endian
Rework vcnl4035_trigger_consumer_handler() so that we are not passing
what should be a u16 value as an int * to regmap_read(). This won't
work on bit endian systems.
Instead, add a new unsigned int variable to pass to regmap_read(). Then
copy that value into the buffer struct.
The buffer array is replaced with a struct since there is only one value
being read. This allows us to use the correct u16 data type and has a
side-effect of simplifying the alignment specification.
Also fix the endianness of the scan format from little-endian to CPU
endianness. Since we are using regmap to read the value, it will be
CPU-endian.
Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: David Lechner <dlechner@baylibre.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
David Lechner [Sat, 14 Mar 2026 23:13:32 +0000 (18:13 -0500)]
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately.
Fixes: 4d671b71beef ("iio: adc: ti-adc161s626: add support for TI 1-channel differential ADCs") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
David Lechner [Sat, 14 Mar 2026 23:13:31 +0000 (18:13 -0500)]
iio: adc: ti-adc161s626: fix buffer read on big-endian
Rework ti_adc_trigger_handler() to properly handle data on big-endian
architectures. The scan data format is 16-bit CPU-endian, so we can't
cast it to a int * on big-endian and expect it to work. Instead, we
introduce a local int variable to read the data into, and then copy it
to the buffer.
Since the buffer isn't passed to any SPI functions, we don't need it to
be DMA-safe. So we can drop it from the driver data struct and just
use stack memory for the scan data.
Since there is only one data value (plus timestamp), we don't need an
array and can just declare a struct with the correct data type instead.
Also fix alignment of iio_get_time_ns() to ( while we are touching this.
Fixes: 4d671b71beef ("iio: adc: ti-adc161s626: add support for TI 1-channel differential ADCs") Signed-off-by: David Lechner <dlechner@baylibre.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Torvalds [Sun, 15 Mar 2026 20:15:39 +0000 (13:15 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The one core change is a re-roll of the tag allocation fix from the
last pull request that uses the correct goto to unroll all the
allocations. The remianing fixes are all small ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix NULL pointer exception during user_scan()
scsi: qla2xxx: Completely fix fcport double free
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
scsi: core: Fix error handling for scsi_alloc_sdev()
Linus Torvalds [Sun, 15 Mar 2026 20:08:05 +0000 (13:08 -0700)]
Merge tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Avoid crash when rmmod/insmod after ftrace killed
This fixes a kernel crash caused by kprobes on the symbol in a module
which is unloaded after ftrace_kill() is called.
- Remove unneeded warnings from __arm_kprobe_ftrace()
Remove unneeded WARN messages which can be triggered if the kprobe is
using ftrace and it fails to enable the ftrace. Since kprobes
correctly handle such failure, we don't need to warn it.
* tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Remove unneeded warnings from __arm_kprobe_ftrace()
kprobes: avoid crash when rmmod/insmod after ftrace killed
Linus Torvalds [Sun, 15 Mar 2026 19:50:05 +0000 (12:50 -0700)]
Merge tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- fix off-by-one in xbc_verify_tree() unclosed brace error. This fixes
a wrong error place in unclosed brace error message
- check bounds before writing in __xbc_open_brace(). This fixes to
check the array index before setting array, so that the bootconfig
can support 16th-depth nested brace correctly
- fix snprintf truncation check in xbc_node_compose_key_after(). This
fixes to handle the return value of snprintf() correctly in case of
the return value == size
- Add bootconfig tests about braces Add test cases for checking error
position about unclosed brace and ensuring supporting 16th depth
nested braces correctly
* tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Add bootconfig tests about braces
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
lib/bootconfig: check bounds before writing in __xbc_open_brace()
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
Linus Torvalds [Sun, 15 Mar 2026 19:22:10 +0000 (12:22 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Linus Torvalds [Sun, 15 Mar 2026 18:36:11 +0000 (11:36 -0700)]
Merge tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KUAP warning in VMX usercopy path
- Fix lockdep warning during PCI enumeration
- Fix to move CMA reservations to arch_mm_preinit
- Fix to check current->mm is alive before getting user callchain
Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák,
Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar
Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor
Malik.
* tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: fix lockdep warning during PCI enumeration
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
powerpc: fix KUAP warning in VMX usercopy path
powerpc, perf: Check that current->mm is alive before getting user callchain
powerpc/mem: Move CMA reservations to arch_mm_preinit
Linus Torvalds [Sun, 15 Mar 2026 18:26:36 +0000 (11:26 -0700)]
Merge tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Work around S2RAM hang if the firmware unexpectedly re-enables the
x2apic hardware while it was disabled by the kernel.
Force-disable it again and issue a warning into the syslog"
* tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Disable x2apic on resume if the kernel expects so
- Fix CID hangs due to a race between concurrent forks
- Fix vfork()/CLONE_VM MMCID bug causing hangs
- Remove pointless preemption guard
- Fix CID task list walk performance regression on large systems
by removing the known-flaky and slow counting logic using
for_each_process_thread() in mm_cid_*fixup_tasks_to_cpus(), and
implementing a simple sched_mm_cid::node list instead"
* tag 'sched-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Avoid full tasklist walks
sched/mmcid: Remove pointless preempt guard
sched/mmcid: Handle vfork()/CLONE_VM correctly
sched/mmcid: Prevent CID stalls due to concurrent forks
- Fix another objtool stack overflow in validate_branch()
* tag 'objtool-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix another stack overflow in validate_branch()
objtool: Handle Clang RSP musical chairs
objtool: Fix ERROR_INSN() error message
objtool: Fix data alignment in elf_add_data()
objtool: Use HOSTCFLAGS for HAVE_XXHASH test
objtool/klp: Avoid NULL pointer dereference when printing code symbol name
objtool/klp: Disable unsupported pr_debug() usage
objtool/klp: Fix detection of corrupt static branch/call entries
Linus Torvalds [Sun, 15 Mar 2026 17:32:57 +0000 (10:32 -0700)]
Merge tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes for the riscv-aplic irqchip driver:
- Fix probing dependency bug on probing failure
- Fix double register_syscore() bug"
* tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Register syscore operations only once
irqchip/riscv-aplic: Do not clear ACPI dependencies on probe failure
Ariana Lazar [Tue, 10 Mar 2026 11:56:44 +0000 (13:56 +0200)]
iio: dac: mcp47feb02: Fix Vref validation [1-999] case
Store reference voltages in uV instead of mV to avoid invalid error code
in dev_err_probe() call. Vref variables store the actual value returned by
devm_regulator_get_enable_read_voltage() function instead of the results of
dividing it by MILLI. The corner case [1-999] divided by MILLI of the
voltage reference variable value would become 0 is covered too.
Fixes: bf394cc80369 ("iio: dac: adding support for Microchip MCP47FEB02") Link: https://lore.kernel.org/all/aYXvP5FLA5BvkoVX@stanley.mountain/ Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Josh Poimboeuf [Tue, 10 Mar 2026 03:45:45 +0000 (20:45 -0700)]
iio: imu: bmi160: Remove potential undefined behavior in bmi160_config_pin()
If 'pin' is not one of its expected values, the value of
'int_out_ctrl_shift' is undefined. With UBSAN enabled, this causes
Clang to generate undefined behavior, resulting in the following
warning:
drivers/iio/imu/bmi160/bmi160_core.o: warning: objtool: bmi160_setup_irq() falls through to next function __cfi_bmi160_core_runtime_resume()
Prevent the UB and improve error handling by returning an error if 'pin'
has an unexpected value.
While at it, simplify the code a bit by moving the 'pin_name' assignment
to the first switch statement.
Linus Torvalds [Sat, 14 Mar 2026 23:25:10 +0000 (16:25 -0700)]
Merge tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Alexandre Belloni:
"This introduces the I3C_OR_I2C symbol which is not a fix per se but is
affecting multiple subsystems so it is included to ease
synchronization.
Apart from that, Adrian is mostly fixing the mipi-i3c-hci driver DMA
handling, and I took the opportunity to add two fixes for the dw-i3c
driver.
Drivers:
- dw: handle 2C properly, fix possible race condition
- mipi-i3c-hci: many DMA related fixes"
* tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach
i3c: master: dw-i3c: Fix missing of_node for virtual I2C adapter
i3c: mipi-i3c-hci: Fallback to software reset when bus disable fails
i3c: mipi-i3c-hci: Fix handling of shared IRQs during early initialization
i3c: mipi-i3c-hci: Fix race in DMA error handling in interrupt context
i3c: mipi-i3c-hci: Consolidate common xfer processing logic
i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort
i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
i3c: mipi-i3c-hci: Fix race between DMA ring dequeue and interrupt handler
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
i3c: mipi-i3c-hci: Fix race in DMA ring enqueue for parallel xfers
i3c: mipi-i3c-hci: Consolidate spinlocks
i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path
i3c: mipi-i3c-hci: Fix Hot-Join NACK
i3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errors
i3c: simplify combined i3c/i2c dependencies
Linus Torvalds [Sat, 14 Mar 2026 19:35:16 +0000 (12:35 -0700)]
Merge tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Remap paths to avoid absolute ones starting with the upcoming Rust
1.95.0 release. This improves build reproducibility, avoids leaking
the exact path and avoids having the same path appear in two forms
The approach here avoids remapping debug information as well, in
order to avoid breaking tools that used the paths to access source
files, which was the previous attempt that needed to be reverted
- Allow 'unused_features' lint for the upcoming Rust 1.96.0 release.
While well-intentioned, we do not benefit much from the new lint
- Emit dependency information into '$(depfile)' directly to avoid a
temporary '.d' file (it was an old approach)
'kernel' crate:
- 'str' module: fix warning under '!CONFIG_BLOCK' by making
'NullTerminatedFormatter' public
- Remove '#[disable_initialized_field_access]' attribute which was
unsound. This means removing the support for structs with unaligned
fields (through the 'repr(packed)' attribute), for now
And document the load-bearing fact of field accessors (i.e. that
they are required for soundness)
- Replace shadowed return token by 'unsafe'-to-create token in order
to remain sound in the face of the likely upcoming Type Alias Impl
Trait (TAIT) and the next trait solver in upstream Rust"
* tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: allow `unused_features`
rust: cpufreq: suppress clippy::double_parens in Policy doctest
rust: pin-init: replace shadowed return token by `unsafe`-to-create token
rust: pin-init: internal: init: document load-bearing fact of field accessors
rust: pin-init: internal: init: remove `#[disable_initialized_field_access]`
rust: build: remap path to avoid absolute path
rust: kbuild: emit dep-info into $(depfile) directly
rust: str: make NullTerminatedFormatter public
Linus Torvalds [Sat, 14 Mar 2026 16:33:58 +0000 (09:33 -0700)]
Merge tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 7.0-rc4 that resolve
some reported problems. They are:
- two rtl8723bs data validation bugfixes
- sm750fb removal path bugfix
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
staging: sm750fb: add missing pci_release_region on error and removal
David Lechner [Sun, 8 Mar 2026 01:44:09 +0000 (19:44 -0600)]
iio: orientation: hid-sensor-rotation: add timestamp hack to not break userspace
Add a hack to push two timestamps in the hid-sensor-rotation scan data
to avoid breaking userspace applications that depend on the timestamp
being at the incorrect location in the scan data due to unintentional
misalignment in older kernels.
When this driver was written, the timestamp was in the correct location
because of the way iio_compute_scan_bytes() was implemented at the time.
(Samples were 24 bytes each.) Then commit 883f61653069 ("iio: buffer:
align the size of scan bytes to size of the largest element") changed
the computed scan_bytes to be a different size (32 bytes), which caused
iio_push_to_buffers_with_timestamp() to place the timestamp at an
incorrect offset.
There have been long periods of time (6 years each) where the timestamp
was in either location, so to not break either case, we open-code the
timestamps to be pushed to both locations in the scan data.
Reported-by: Jonathan Cameron <jic23@kernel.org> Closes: https://lore.kernel.org/linux-iio/20260215162351.79f40b32@jic23-huawei/ Fixes: 883f61653069 ("iio: buffer: align the size of scan bytes to size of the largest element") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Felix Gu [Wed, 4 Mar 2026 14:14:32 +0000 (22:14 +0800)]
iio: proximity: rfd77402: Fix completion race condition in IRQ mode
In IRQ mode, the completion was being reinitialized after the
measurement command had already been sent to the hardware. This
created a race condition where the IRQ handler could call complete()
before reinit_completion() was executed. Consequently,
wait_for_completion_timeout() would fail to see the signal and wait
until it timed out.
Move reinit_completion() to occur before the measurement command is
triggered to ensure the synchronization primitive is ready to
capture the interrupt.
interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes()
The change to dynamic IDs for SM8450 platform interconnects left two links
unconverted, fix it to avoid the NULL pointer dereference in runtime,
when a pointer to a destination interconnect is not valid:
Linus Torvalds [Fri, 13 Mar 2026 22:38:55 +0000 (15:38 -0700)]
Merge tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
Linus Torvalds [Fri, 13 Mar 2026 22:11:05 +0000 (15:11 -0700)]
Merge tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id()
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity
* tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Rename show_cpu_pool{s,}_hog{s,}() to reflect broadened scope
workqueue: Add stall detector sample module
workqueue: Show all busy workers in stall diagnostics
workqueue: Show in-flight work item duration in stall diagnostics
workqueue: Rename pool->watchdog_ts to pool->last_progress_ts
workqueue: Use POOL_BH instead of WQ_BH when checking pool flags
Linus Torvalds [Fri, 13 Mar 2026 22:06:31 +0000 (15:06 -0700)]
Merge tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains
* tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Don't expose dead tasks in cgroup
cgroup/cpuset: Call rebuild_sched_domains() directly in hotplug
Linus Torvalds [Fri, 13 Mar 2026 21:54:56 +0000 (14:54 -0700)]
Merge tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
Linus Torvalds [Fri, 13 Mar 2026 21:18:13 +0000 (14:18 -0700)]
Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
Linus Torvalds [Fri, 13 Mar 2026 21:03:58 +0000 (14:03 -0700)]
Merge tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
Linus Torvalds [Fri, 13 Mar 2026 17:49:15 +0000 (10:49 -0700)]
Merge tag 'xfs-fixes-7.0-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A couple race fixes found on the new healthmon mechanism, and another
flushing dquots during filesystem shutdown"
* tag 'xfs-fixes-7.0-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix integer overflow in bmap intent sort comparator
xfs: fix undersized l_iclog_roundoff values
xfs: ensure dquot item is deleted from AIL only after log shutdown
xfs: remove redundant set null for ip->i_itemp
xfs: fix returned valued from xfs_defer_can_append
xfs: Remove redundant NULL check after __GFP_NOFAIL
xfs: fix race between healthmon unmount and read_iter
xfs: remove scratch field from struct xfs_gc_bio
Linus Torvalds [Fri, 13 Mar 2026 17:46:32 +0000 (10:46 -0700)]
Merge tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix reconnect when using non-default port
- Fix default retransmission behavior
- Fix open handle reuse in cifs_open
- Fix export for smb2-mapperror-test
- Fix potential corruption on write retry
- Fix potentially uninitialized superblock flags
- Fix missing O_DIRECT and O_SYNC flags on create
* tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make default value of retrans as zero
smb: client: fix open handle lookup in cifs_open()
smb: client: fix iface port assignment in parse_server_interfaces
smb/client: only export symbol for 'smb2maperror-test' module
smb: client: fix in-place encryption corruption in SMB2_write()
smb: client: fix sbflags initialization
smb: client: fix atomic open with O_DIRECT & O_SYNC
Linus Torvalds [Fri, 13 Mar 2026 17:31:10 +0000 (10:31 -0700)]
Merge tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of device ID and quirk updates, plus a bunch of small fixes
most of which (other than the Cadence one) are unremarkable error
handling fixes"
* tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atcspi200: Handle invalid buswidth and fix compiler warning
spi: dt-bindings: sun6i: Allow Dual SPI and Quad SPI for newer SoCs
spi: intel-pci: Add support for Nova Lake mobile SPI flash
spi: cadence-qspi: Fix requesting of APB and AHB clocks on JH7110
spi: rockchip-sfc: Fix double-free in remove() callback
spi: atcspi200: Fix double-free in atcspi_configure_dma()
spi: amlogic: spifc-a4: Fix DMA mapping error handling
Linus Torvalds [Fri, 13 Mar 2026 17:29:45 +0000 (10:29 -0700)]
Merge tag 'regulator-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small driver specific fixes for pca9450, cleaning up
logging and fixing warnings due to confusion with interrupt type"
* tag 'regulator-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pca9450: Correct probed name for PCA9452
regulator: pca9450: Correct interrupt type
USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed
Add USB_QUIRK_NO_BOS for ezcap401 capture card, without it dmesg will show
"unable to get BOS descriptor or descriptor too short" and "unable to
read config index 0 descriptor/start: -71" errors and device will not
able to work at full speed at 10gbs
Linus Torvalds [Fri, 13 Mar 2026 17:15:14 +0000 (10:15 -0700)]
Merge tag 'sound-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There have been continuous flux but most of them are device-specific
small fixes, while we see a few core fixes at this time (minor PCM fix
for linked streams and a few ASoC core fixes for delayed work, etc)
Core:
- PCM: Fix use-after-free in linked stream drain
ASoC:
- core: Fixes for delayed works, empty DMI string handling and DT overlay
- qcom: qdsp6: Fix ADSP stop/start crash via component removal ordering
- tegra: Add support for Tegra238 audio graph card
- amd: Fix missing error checks for clock acquisition
- rt1011: Fix incorrect DAPM context retrieval helper
HD-audio:
- Add quirk for Gigabyte H610M, ASUS UM6702RC, HP 14s-dr5xxx, and
ThinkPad X390
USB-audio:
- Scarlett2: Fix NULL dereference for malformed endpoint descriptors
- Add quirk for SPACETOUCH"
* tag 'sound-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
ASoC: detect empty DMI strings
ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition
ALSA: usb-audio: Add iface reset and delay quirk for SPACETOUCH USB Audio
ASoC: codecs: rt1011: Use component to get the dapm context in spk_mode_put
ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces
ASoC: simple-card-utils: fix graph_util_is_ports0() for DT overlays
ASoC: soc-core: flush delayed work before removing DAIs and widgets
ASoC: soc-core: drop delayed_work_pending() check before flush
ASoC: tegra: Add support for Tegra238 soundcard
ALSA: hda/realtek: Add headset jack quirk for Thinkpad X390
ALSA: hda/realtek: add HP Laptop 14s-dr5xxx mute LED quirk
ALSA: hda/realtek: add quirk for ASUS UM6702RC
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
ALSA: hda/realtek: Add quirk for Gigabyte Technology to fix headphone
firmware: cs_dsp: Fix fragmentation regression in firmware download
ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start
Linus Torvalds [Fri, 13 Mar 2026 17:13:06 +0000 (10:13 -0700)]
Merge tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix nvme-pci IRQ race and slab-out-of-bounds access
- Fix recursive workqueue locking for target async events
- Various cleanups
- Fix a potential NULL pointer dereference in ublk on size setting
- ublk automatic partition scanning fix
- Two s390 dasd fixes
* tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme: Annotate struct nvme_dhchap_key with __counted_by
nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue()
nvme-pci: Fix race bug in nvme_poll_irqdisable()
nvmet: move async event work off nvmet-wq
nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
s390/dasd: Copy detected format information to secondary device
s390/dasd: Move quiesce state with pprc swap
ublk: don't clear GD_SUPPRESS_PART_SCAN for unprivileged daemons
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
Linus Torvalds [Fri, 13 Mar 2026 17:09:35 +0000 (10:09 -0700)]
Merge tag 'io_uring-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix an inverted true/false comment on task_no_new_privs, from the
BPF filtering changes merged in this release
- Use the migration disabling way of running the BPF filters, as the
io_uring side doesn't do that already
- Fix an issue with ->rings stability under resize, both for local
task_work additions and for eventfd signaling
- Fix an issue with SQE mixed mode, where a bounds check wasn't correct
for having a 128b SQE
- Fix an issue where a legacy provided buffer group is changed to to
ring mapped one while legacy buffers from that group are in flight
* tag 'io_uring-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/kbuf: check if target buffer list is still legacy on recycle
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
io_uring/eventfd: use ctx->rings_rcu for flags checking
io_uring: ensure ctx->rings is stable for task work flags manipulation
io_uring/bpf_filter: use bpf_prog_run_pin_on_cpu() to prevent migration
io_uring/register: fix comment about task_no_new_privs
Linus Torvalds [Fri, 13 Mar 2026 17:07:33 +0000 (10:07 -0700)]
Merge tag 'slab-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for a memory leak that can occur when already so low on memory
that we can't allocate a new slab anymore (Qing Wang)
- Fix for a case where slabobj_ext array for a slab might be allocated
from the same slab, making it permanently non-freeable (Harry Yoo)
* tag 'slab-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: fix memory leak when refill_sheaf() fails
mm/slab: fix an incorrect check in obj_exts_alloc_size()
Linus Torvalds [Fri, 13 Mar 2026 17:06:00 +0000 (10:06 -0700)]
Merge tag 'pwrseq-fixes-for-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
- fix OF-node reference leak in pwrseq-pcie-m2
* tag 'pwrseq-fixes-for-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: Fix device node reference leak in probe
Josh Law [Thu, 12 Mar 2026 19:11:43 +0000 (19:11 +0000)]
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
snprintf() returns the number of characters that would have been
written excluding the NUL terminator. Output is truncated when the
return value is >= the buffer size, not just > the buffer size.
When ret == size, the current code takes the non-truncated path,
advancing buf by ret and reducing size to 0. This is wrong because
the output was actually truncated (the last character was replaced by
NUL). Fix by using >= so the truncation path is taken correctly.
Josh Law [Thu, 12 Mar 2026 19:11:42 +0000 (19:11 +0000)]
lib/bootconfig: check bounds before writing in __xbc_open_brace()
The bounds check for brace_index happens after the array write.
While the current call pattern prevents an actual out-of-bounds
access (the previous call would have returned an error), the
write-before-check pattern is fragile and would become a real
out-of-bounds write if the error return were ever not propagated.
Move the bounds check before the array write so the function is
self-contained and safe regardless of caller behavior.
Link: https://lore.kernel.org/all/20260312191143.28719-3-objecting@objecting.org/ Fixes: ead1e19ad905 ("lib/bootconfig: Fix a bug of breaking existing tree nodes") Cc: stable@vger.kernel.org Signed-off-by: Josh Law <objecting@objecting.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Nilay Shroff [Tue, 10 Mar 2026 08:21:24 +0000 (13:51 +0530)]
powerpc/iommu: fix lockdep warning during PCI enumeration
Commit a75b2be249d6 ("iommu: Add iommu_driver_get_domain_for_dev()
helper") introduced iommu_driver_get_domain_for_dev() for driver
code paths that hold iommu_group->mutex while attaching a device
to an IOMMU domain.
The same commit also added a lockdep assertion in
iommu_get_domain_for_dev() to ensure that callers do not hold
iommu_group->mutex when invoking it.
On powerpc platforms, when PCI device ownership is switched from
BLOCKED to the PLATFORM domain, the attach callback
spapr_tce_platform_iommu_attach_dev() still calls
iommu_get_domain_for_dev(). This happens while iommu_group->mutex
is held during domain switching, which triggers the lockdep warning
below during PCI enumeration:
Fix this by using iommu_driver_get_domain_for_dev() instead of
iommu_get_domain_for_dev() in spapr_tce_platform_iommu_attach_dev(),
which is the appropriate helper for callers holding the group mutex.
Josh Law [Thu, 12 Mar 2026 19:11:41 +0000 (19:11 +0000)]
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
__xbc_open_brace() pushes entries with post-increment
(open_brace[brace_index++]), so brace_index always points one past
the last valid entry. xbc_verify_tree() reads open_brace[brace_index]
to report which brace is unclosed, but this is one past the last
pushed entry and contains stale/zero data, causing the error message
to reference the wrong node.
Use open_brace[brace_index - 1] to correctly identify the unclosed
brace. brace_index is known to be > 0 here since we are inside the
if (brace_index) guard.
Link: https://lore.kernel.org/all/20260312191143.28719-2-objecting@objecting.org/ Fixes: ead1e19ad905 ("lib/bootconfig: Fix a bug of breaking existing tree nodes") Cc: stable@vger.kernel.org Signed-off-by: Josh Law <objecting@objecting.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Dave Airlie [Thu, 12 Mar 2026 22:32:14 +0000 (08:32 +1000)]
Merge tag 'drm-misc-fixes-2026-03-12' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A pixel byte swap fix for st7586, a null pointer dereference fix for
gud, two timings fixes for ti-sn65dsi83, an initialization fix for ivpu,
and a runtime suspend deadlock fix for amdxdna.
Jens Axboe [Thu, 12 Mar 2026 21:15:53 +0000 (15:15 -0600)]
Merge tag 'nvme-7.0-2026-03-12' of git://git.infradead.org/nvme into block-7.0
Pull NVMe fixes from Keith:
"- Fix nvme-pci IRQ race and slab-out-of-bounds access (Sungwoo Kim)
- Fix recursive workqueue locking for target async events (Chaitanya)
- Various cleanups (Maurizio Lombardi, Thorsten Blum)"
* tag 'nvme-7.0-2026-03-12' of git://git.infradead.org/nvme:
nvme: Annotate struct nvme_dhchap_key with __counted_by
nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue()
nvme-pci: Fix race bug in nvme_poll_irqdisable()
nvmet: move async event work off nvmet-wq
nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
Linus Torvalds [Thu, 12 Mar 2026 20:01:37 +0000 (13:01 -0700)]
Merge tag 'pm-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- Make the idle loop skip the cpuidle governor .reflect() callback
after it has skipped the .select() one (Rafael Wysocki)
- Fix swapped power/energy unit labels in cpupower (Kaushlendra Kumar)
- Add support for setting EPP via systemd service and intel_pstate
turbo boost support to cpupower (Jan Kiszka, Zhang Rui)
* tag 'pm-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
sched: idle: Make skipping governor callbacks more consistent
cpupower: Add intel_pstate turbo boost support for Intel platforms
cpupower: Add support for setting EPP via systemd service
cpupower: fix swapped power/energy unit labels
Linus Torvalds [Thu, 12 Mar 2026 19:43:19 +0000 (12:43 -0700)]
Merge tag 'acpi-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
- On some platforms, the ACPI companion object of the ACPI video bus
platform device is shared with multiple other platform devices which
leads to driver probe issues, so replace that device with an
auxiliary one (which arguably is a better match for the given use
case) and update the ACPI video bus driver accordingly (Rafael
Wysocki)
- Address sparse warnings in acpi_os_initialize() by adding __iomem to
a local variable declaration (Ben Dooks)
* tag 'acpi-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: OSL: fix __iomem type on return from acpi_os_map_generic_address()
ACPI: video: Switch over to auxiliary bus type
Linus Torvalds [Thu, 12 Mar 2026 19:38:17 +0000 (12:38 -0700)]
Merge tag 'nfs-for-7.0-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix NFS KConfig typos
- Decrement re_receiving on the early exit paths
- return EISDIR on nfs3_proc_create if d_alias is a dir
* tag 'nfs-for-7.0-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix NFS KConfig typos
xprtrdma: Decrement re_receiving on the early exit paths
nfs: return EISDIR on nfs3_proc_create if d_alias is a dir
Linus Torvalds [Thu, 12 Mar 2026 19:15:27 +0000 (12:15 -0700)]
Merge tag 'for-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- detect possible file name hash collision earlier so it does not lead
to transaction abort
- handle b-tree leaf overflows when snapshotting a subvolume with set
received UUID, leading to transaction abort
- in zoned mode, reorder relocation block group initialization after
the transaction kthread start
- fix orphan cleanup state tracking of subvolume, this could lead to
invalid dentries under some conditions
- add locking around updates of dynamic reclain state update
- in subpage mode, add missing RCU unlock when trying to releae extent
buffer
- remap tree fixes:
- add missing description strings for the newly added remap tree
- properly update search key when iterating backrefs
* tag 'for-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove duplicated definition of btrfs_printk_in_rcu()
btrfs: remove unnecessary transaction abort in the received subvol ioctl
btrfs: abort transaction on failure to update root in the received subvol ioctl
btrfs: fix transaction abort on set received ioctl due to item overflow
btrfs: fix transaction abort when snapshotting received subvolumes
btrfs: fix transaction abort on file creation due to name hash collision
btrfs: read key again after incrementing slot in move_existing_remaps()
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
btrfs: zoned: move btrfs_zoned_reserve_data_reloc_bg() after kthread start
btrfs: hold space_info->lock when clearing periodic reclaim ready
btrfs: print-tree: add remap tree definitions
Linus Torvalds [Thu, 12 Mar 2026 18:33:35 +0000 (11:33 -0700)]
Merge tag 'net-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and netfilter.
Current release - regressions:
- eth: mana: Null service_wq on setup error to prevent double destroy
Previous releases - regressions:
- nexthop: fix percpu use-after-free in remove_nh_grp_entry
- sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
- bpf: fix nd_tbl NULL dereference when IPv6 is disabled
- neighbour: restore protocol != 0 check in pneigh update
- tipc: fix divide-by-zero in tipc_sk_filter_connect()
- eth:
- mlx5:
- fix crash when moving to switchdev mode
- fix DMA FIFO desync on error CQE SQ recovery
- iavf: fix PTP use-after-free during reset
- bonding: fix type confusion in bond_setup_by_slave()
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- core: add xmit recursion limit to tunnel xmit functions
- net-shapers: don't free reply skb after genlmsg_reply()
- netfilter:
- fix stack out-of-bounds read in pipapo_drop()
- fix OOB read in nfnl_cthelper_dump_table()
- mctp:
- fix device leak on probe failure
- i2c: fix skb memory leak in receive path
- can: keep the max bitrate error at 5%
- eth:
- bonding: fix nd_tbl NULL dereference when IPv6 is disabled
- bnxt_en: fix RSS table size check when changing ethtool channels
- amd-xgbe: prevent CRC errors during RX adaptation with AN disabled
- octeontx2-af: devlink: fix NIX RAS reporter recovery condition"
* tag 'net-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: prevent NULL deref in ip[6]tunnel_xmit()
octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status
octeontx2-af: devlink: fix NIX RAS reporter recovery condition
net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support
net/mana: Null service_wq on setup error to prevent double destroy
selftests: rtnetlink: add neighbour update test
neighbour: restore protocol != 0 check in pneigh update
net: dsa: realtek: Fix LED group port bit for non-zero LED group
tipc: fix divide-by-zero in tipc_sk_filter_connect()
net: dsa: microchip: Fix error path in PTP IRQ setup
bpf: bpf_out_neigh_v6: Fix nd_tbl NULL dereference when IPv6 is disabled
bpf: bpf_out_neigh_v4: Fix nd_tbl NULL dereference when IPv6 is disabled
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
ipv6: move the disable_ipv6_mod knob to core code
net: bcmgenet: fix broken EEE by converting to phylib-managed state
net-shapers: don't free reply skb after genlmsg_reply()
net: dsa: mxl862xx: don't set user_mii_bus
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
page_pool: store detach_time as ktime_t to avoid false-negatives
net: macb: Shuffle the tx ring before enabling tx
...
Merge cpupower utility updates, including a fix and improvements of the
existing functionality, for 7.0-rc4.
* pm-tools:
cpupower: Add intel_pstate turbo boost support for Intel platforms
cpupower: Add support for setting EPP via systemd service
cpupower: fix swapped power/energy unit labels
Linus Torvalds [Thu, 12 Mar 2026 17:58:02 +0000 (10:58 -0700)]
Merge tag 'apparmor-pr-mainline-2026-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull AppArmor fixes from John Johansen:
- fix race between freeing data and fs accessing it
- fix race on unreferenced rawdata dereference
- fix differential encoding verification
- fix unconfined unprivileged local user can do privileged policy management
- Fix double free of ns_name in aa_replace_profiles()
- fix missing bounds check on DEFAULT table in verify_dfa()
- fix side-effect bug in match_char() macro usage
- fix: limit the number of levels of policy namespaces
- replace recursive profile removal with iterative approach
- fix memory leak in verify_header
- validate DFA start states are in bounds in unpack_pdb
* tag 'apparmor-pr-mainline-2026-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix race between freeing data and fs accessing it
apparmor: fix race on rawdata dereference
apparmor: fix differential encoding verification
apparmor: fix unprivileged local user can do privileged policy management
apparmor: Fix double free of ns_name in aa_replace_profiles()
apparmor: fix missing bounds check on DEFAULT table in verify_dfa()
apparmor: fix side-effect bug in match_char() macro usage
apparmor: fix: limit the number of levels of policy namespaces
apparmor: replace recursive profile removal with iterative approach
apparmor: fix memory leak in verify_header
apparmor: validate DFA start states are in bounds in unpack_pdb
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Add "do no harm" testing of EFER, CR0, CR4, and CR8 for SEV+ guests to
verify that the guest can read and write the registers, without hitting
e.g. a #VC on SEV-ES guests due to KVM incorrectly trying to intercept a
register.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260310211841.2552361-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jens Axboe [Thu, 12 Mar 2026 14:59:25 +0000 (08:59 -0600)]
io_uring/kbuf: check if target buffer list is still legacy on recycle
There's a gap between when the buffer was grabbed and when it
potentially gets recycled, where if the list is empty, someone could've
upgraded it to a ring provided type. This can happen if the request
is forced via io-wq. The legacy recycling is missing checking if the
buffer_list still exists, and if it's of the correct type. Add those
checks.
Cc: stable@vger.kernel.org Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers") Reported-by: Keenan Dong <keenanat2000@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Miguel Ojeda [Thu, 12 Mar 2026 11:10:14 +0000 (12:10 +0100)]
rust: kbuild: allow `unused_features`
Starting with the upcoming Rust 1.96.0 (to be released 2026-05-28),
`rustc` introduces the new lint `unused_features` [1], which warns [2]:
warning: feature `used_with_arg` is declared but not used
--> <crate attribute>:1:93
|
1 | #![feature(asm_const,asm_goto,arbitrary_self_types,lint_reasons,offset_of_nested,raw_ref_op,used_with_arg)]
| ^^^^^^^^^^^^^
|
= note: `#[warn(unused_features)]` (part of `#[warn(unused)]`) on by default
The original goal of using `-Zcrate-attr` automatically was that there
is a consistent set of features enabled and managed globally for all
Rust kernel code (modulo exceptions like the `rust/` crated).
While we could require crates to enable features manually (even if we
still keep the `-Zallow-features=` list, i.e. removing the `-Zcrate-attr`
list), it is not really worth making all developers worry about it just
for a new lint.
The features are expected to eventually become stable anyway (most already
did), and thus having to remove features in every file that may use them
is not worth it either.
Thus just allow the new lint globally.
The lint actually existed for a long time, which is why `rustc` does
not complain about an unknown lint in the stable versions we support,
but it was "disabled" years ago [3], and now it was made to work again.
For extra context, the new implementation of the lint has already been
improved to avoid linting about features that became stable thanks to
Benno's report and the ensuing discussion [4] [5], but while that helps,
it is still the case that we may have features enabled that are not used
for one reason or another in a particular crate.
Takashi Iwai [Thu, 12 Mar 2026 11:59:28 +0000 (12:59 +0100)]
Merge tag 'asoc-fix-v7.0-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
Quite a large pull request, but nothing too concerning here - everything
is fairly small. We've got a couple of smaller core fixes for races on
card teardown from Matteo Cotifava, a fix for handling dodgy DMI
information generated by u-boot, some driver specific fixes and some new
device IDs for Tegra.
John Hubbard [Thu, 12 Mar 2026 04:19:34 +0000 (21:19 -0700)]
rust: cpufreq: suppress clippy::double_parens in Policy doctest
The kernel fmt! proc macro wraps each format argument as &(arg). Passing a
tuple such as (a, b) produces &((a, b)) after expansion. Clippy flags that
as double_parens, but it is a false positive fixed in Clippy 1.92 [1] [2].
Suppress the warning on the affected doctest function with a reason
attribute so it can be removed once the minimum toolchain moves past 1.92.
[ We may end up deciding to support per-version Clippy lints, in which
case we will need [3].
In the future, if [4] gets fixed, we may be able to use
`Delimiter::None` as Gary suggested in [5].
Benno Lossin [Wed, 11 Mar 2026 10:50:49 +0000 (11:50 +0100)]
rust: pin-init: replace shadowed return token by `unsafe`-to-create token
We use a unit struct `__InitOk` in the closure generated by the
initializer macros as the return value. We shadow it by creating a
struct with the same name again inside of the closure, preventing early
returns of `Ok` in the initializer (before all fields have been
initialized).
In the face of Type Alias Impl Trait (TAIT) and the next trait solver,
this solution no longer works [1]. The shadowed struct can be named
through type inference. In addition, there is an RFC proposing to add
the feature of path inference to Rust, which would similarly allow [2].
Thus remove the shadowed token and replace it with an `unsafe` to create
token.
The reason we initially used the shadowing solution was because an
alternative solution used a builder pattern. Gary writes [3]:
In the early builder-pattern based InitOk, having a single InitOk
type for token is unsound because one can launder an InitOk token
used for one place to another initializer. I used a branded lifetime
solution, and then you figured out that using a shadowed type would
work better because nobody could construct it at all.
The laundering issue does not apply to the approach we ended up with
today.
With this change, the example by Tim Chirananthavat in [1] no longer
compiles and results in this error:
error: cannot construct `pin_init::__internal::InitOk` with struct literal syntax due to private fields
--> src/main.rs:26:17
|
26 | InferredType {}
| ^^^^^^^^^^^^
|
= note: private field `0` that was not provided
help: you might have meant to use the `new` associated function
|
26 - InferredType {}
26 + InferredType::new()
|
Applying the suggestion of using the `::new()` function, results in
another expected error:
error[E0133]: call to unsafe function `pin_init::__internal::InitOk::new` is unsafe and requires unsafe block
--> src/main.rs:26:17
|
26 | InferredType::new()
| ^^^^^^^^^^^^^^^^^^^ call to unsafe function
|
= note: consult the function's documentation for information on how to avoid undefined behavior
Sayali Patil [Wed, 4 Mar 2026 12:22:01 +0000 (17:52 +0530)]
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
The new PowerPC VMX fast path (__copy_tofrom_user_power7_vmx) is not
exercised by existing copyloops selftests. This patch updates
the selftest to exercise the VMX variant, ensuring the VMX copy path
is validated.
Changes include:
- COPY_LOOP=test___copy_tofrom_user_power7_vmx with -D VMX_TEST is used
in existing selftest build targets.
- Inclusion of ../utils.c to provide get_auxv_entry() for hardware
feature detection.
- At runtime, the test skips execution if Altivec is not available.
- Copy sizes above VMX_COPY_THRESHOLD are used to ensure the VMX
path is taken.
This enables validation of the VMX fast path without affecting systems
that do not support Altivec.
Sayali Patil [Wed, 4 Mar 2026 12:22:00 +0000 (17:52 +0530)]
powerpc: fix KUAP warning in VMX usercopy path
On powerpc with PREEMPT_FULL or PREEMPT_LAZY and function tracing enabled,
KUAP warnings can be triggered from the VMX usercopy path under memory
stress workloads.
KUAP requires that no subfunctions are called once userspace access has
been enabled. The existing VMX copy implementation violates this
requirement by invoking enter_vmx_usercopy() from the assembly path after
userspace access has already been enabled. If preemption occurs
in this window, the AMR state may not be preserved correctly,
leading to unexpected userspace access state and resulting in
KUAP warnings.
Fix this by restructuring the VMX usercopy flow so that VMX selection
and VMX state management are centralized in raw_copy_tofrom_user(),
which is invoked by the raw_copy_{to,from,in}_user() wrappers.
The new flow is:
- raw_copy_{to,from,in}_user() calls raw_copy_tofrom_user()
- raw_copy_tofrom_user() decides whether to use the VMX path
based on size and CPU capability
- Call enter_vmx_usercopy() before enabling userspace access
- Enable userspace access as per the copy direction
and perform the VMX copy
- Disable userspace access as per the copy direction
- Call exit_vmx_usercopy()
- Fall back to the base copy routine if the VMX copy faults
With this change, the VMX assembly routines no longer perform VMX state
management or call helper functions; they only implement the
copy operations.
The previous feature-section based VMX selection inside
__copy_tofrom_user_power7() is removed, and a dedicated
__copy_tofrom_user_power7_vmx() entry point is introduced.
This ensures correct KUAP ordering, avoids subfunction calls
while KUAP is unlocked, and eliminates the warnings while preserving
the VMX fast path.
Viktor Malik [Mon, 9 Mar 2026 14:40:45 +0000 (15:40 +0100)]
powerpc, perf: Check that current->mm is alive before getting user callchain
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
In addition, move storing the top-level stack entry to generic
perf_callchain_user to make sure the top-evel entry is always captured,
even if current->mm is NULL.
Fixes: 20002ded4d93 ("perf_counter: powerpc: Add callchain support") Signed-off-by: Viktor Malik <vmalik@redhat.com> Tested-by: Qiao Zhao <qzhao@redhat.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Reviewed-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
[Maddy: fixed message to avoid checkpatch format style error] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260309144045.169427-1-vmalik@redhat.com
powerpc/mem: Move CMA reservations to arch_mm_preinit
commit 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model"),
changed the initialization order of "pageblock_order" from...
start_kernel()
- setup_arch()
- initmem_init()
- sparse_init()
- set_pageblock_order(); // this sets the pageblock_order
- xxx_cma_reserve();
to...
start_kernel()
- setup_arch()
- xxx_cma_reserve();
- mm_core_init_early()
- free_area_init()
- sparse_init()
- set_pageblock_order() // this sets the pageblock_order.
So this means, pageblock_order is not initialized before these cma
reservation function calls, hence we are seeing CMA failures like...
[ 0.000000] kvm_cma_reserve: reserving 3276 MiB for global area
[ 0.000000] cma: pageblock_order not yet initialized. Called during early boot?
[ 0.000000] cma: Failed to reserve 3276 MiB
....
[ 0.000000][ T0] cma: pageblock_order not yet initialized. Called during early boot?
[ 0.000000][ T0] cma: Failed to reserve 1024 MiB
This patch moves these CMA reservations to arch_mm_preinit() which
happens in mm_core_init() (which happens after pageblock_order is
initialized), but before the memblock moves the free memory to buddy.
Dave Airlie [Thu, 12 Mar 2026 04:38:07 +0000 (14:38 +1000)]
Merge tag 'drm-msm-fixes-2026-03-06' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v7.0:
Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels with
compression enabled
DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
Alok Tiwari [Tue, 10 Mar 2026 18:48:17 +0000 (11:48 -0700)]
octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status
The NIX RAS health report path uses nix_af_rvu_err when handling the
NIX_AF_RVU_RAS case, so the report prints the ERR interrupt status rather
than the RAS interrupt status.
The NIX RAS health reporter recovery routine checks nix_af_rvu_int to
decide whether to re-enable NIX_AF_RAS interrupts. This is the RVU
interrupt status field and is unrelated to RAS events, so the recovery
flow may incorrectly skip re-enabling NIX_AF_RAS interrupts.
Check nix_af_rvu_ras instead before writing NIX_AF_RAS_ENA_W1S.
Chintan Vankar [Tue, 10 Mar 2026 16:09:40 +0000 (21:39 +0530)]
net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support
The "rx_filter" member of "hwtstamp_config" structure is an enum field and
does not support bitwise OR combination of multiple filter values. It
causes error while linuxptp application tries to match rx filter version.
Fix this by storing the requested filter type in a new port field.
Shiraz Saleem [Mon, 9 Mar 2026 17:24:43 +0000 (10:24 -0700)]
net/mana: Null service_wq on setup error to prevent double destroy
In mana_gd_setup() error path, set gc->service_wq to NULL after
destroy_workqueue() to match the cleanup in mana_gd_cleanup().
This prevents a use-after-free if the workqueue pointer is checked
after a failed setup.
Fixes: f975a0955276 ("net: mana: Fix double destroy_workqueue on service rescan PCI path") Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com> Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260309172443.688392-1-kotaranov@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 12 Mar 2026 02:12:59 +0000 (19:12 -0700)]
Merge tag 'nf-26-03-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
Due to large volume of backlogged patches its unlikely I will make the
2nd planned PR this week, so several legit fixes will be pushed back
to next week. Sorry for the inconvenience but I am out of ideas and
alternatives.
1) syzbot managed to add/remove devices to a flowtable, due to a bug in
the flowtable netdevice notifier this gets us a double-add and
eventually UaF when device is removed again (we only expect one
entry, duplicate remains past net_device end-of-life).
From Phil Sutter, bug added in 6.16.
2) Yiming Qian reports another nf_tables transaction handling bug:
in some cases error unwind misses to undo certain set elements,
resulting in refcount underflow and use-after-free, bug added in 6.4.
3) Jenny Guanni Qu found out-of-bounds read in pipapo set type.
While the value is never used, it still rightfully triggers KASAN
splats. Bug exists since this set type was added in 5.6.
4) a few x_tables modules contain copypastry tcp option parsing code which
can read 1 byte past the option area. This bug is ancient, fix from
David Dull.
5) nfnetlink_queue leaks kernel memory if userspace provides bad
NFQA_VLAN/NFQA_L2HDR attributes. From Hyunwoo Kim, bug stems from
from 4.7 days.
6) nfnetlink_cthelper has incorrect loop restart logic which may result
in reading one pointer past end of array. From 3.6 days, fix also from
Hyunwoo Kim.
7) xt_IDLETIMER v0 extension must reject working with timers added
by revision v1, else we get list corruption. Bug added in v5.7.
From Yifan Wu, Juefei Pu and Yuan Tan via Xin Lu.
* tag 'nf-26-03-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels
netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table()
netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path
netfilter: x_tables: guard option walkers against 1-byte tail reads
netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop()
netfilter: nf_tables: always walk all pending catchall elements
netfilter: nf_tables: Fix for duplicate device in netdev hooks
====================
Nikolay Aleksandrov changes return code of RDMA related ice devlink get
parameters when irdma is not enabled to -EOPNOTSUPP as current return
of -ENODEV causes issues with devlink output.
Petr Oros resolves a couple of issues in iavf; freeing PTP resources
before reset and disable. Fixing contention issues with the netdev lock
between reset and some ethtool operations.
Alok Tiwari corrects an incorrect comparison of cloud filter values and
adjust some passed arguments to sizeof() for consistency on i40e.
Matt Vollrath removes an incorrect decrement for DMA error on e1000 and
e1000e drivers.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000/e1000e: Fix leak in DMA error cleanup
i40e: fix src IP mask checks and memcpy argument names in cloud filter
iavf: fix incorrect reset handling in callbacks
iavf: fix PTP use-after-free during reset
drivers: net: ice: fix devlink parameters get without irdma
====================
====================
neighbour: fix update of proxy neighbour
While re-reading some "old" patches I ran into a small change of
behavior in commit dc2a27e524ac ("neighbour: Update pneigh_entry in
pneigh_create().").
The old behavior was not consistent between ->protocol and ->flags,
and didn't offer a way to clear protocol, so maybe it's better to
change that (7-years-old [1]) behavior. But then we should change
non-proxy neighbours as well to keep neigh/pneigh consistent.
projects / thirdparty / linux.git / log
