- Remove broken Intel wiki link; add Intel SDM download page link
- Fix description of tempX_max to clarify it is not Core2-only
- Correct tempX_label string for package temperature (changed in commit 2bc0e6d07ee5 ("hwmon: (coretemp) rearrange tjmax handing code"))
Hassan Maazu [Sat, 16 May 2026 22:09:26 +0000 (22:09 +0000)]
Documentation: hwmon: fix typo in heading for max31730
Generated heading & link to driver doc for max31730 wrongly named
max31790 under hwmon docs. This patch fixes typo so link to max31730
is easily identifiable without confusion with max31790.
The Murata D1U74T-W series are hot-pluggable 1U AC/DC front-end
power supplies in the Intel CRPS-185 / OCP M-CRPS form factor.
Each variant delivers a 12 V main output plus a 12 V standby output
from a wide AC input (90-264 Vac) or HVDC supply, and includes an
internal variable-speed cooling fan and on-board voltage, current,
power, fan-speed, and temperature telemetry.
The host-side digital interface is a PMBus 1.2 port on I2C. The
PSU's other electrical signals (status, alert, current-share) live
on the CRPS edge connector and are consumed by the chassis
controller rather than the host SoC, so there are no host-described
supplies, GPIOs, clocks, or interrupts. Add the compatible to
trivial-devices.yaml rather than carrying a standalone binding file.
Roman Bakshansky [Sat, 16 May 2026 11:42:52 +0000 (14:42 +0300)]
hwmon: (coretemp) replace hardcoded core count with dynamic value
The hardcoded maximum of 512 cores per package was first defined by commit 34cf8c657cf0 ("hwmon: (coretemp) Enlarge per package core count limit")
and later kept as a fallback with a TODO in commit 1a793caf6f69 ("hwmon:
(coretemp) Use dynamic allocated memory for core temp_data") because the
actual per-package core count was not reliably available at the time.
Now that topology_num_cores_per_package() is stable and suitable for use,
it's time to complete the TODO and allocate only the needed amount of
memory for core_data.
The adt7411 driver exposes additional standard hwmon attributes beyond
the ones currently listed in Documentation/hwmon/adt7411.rst.
Document voltage min/max/alarm attributes, temperature min/max and
min_alarm/max_alarm attributes, and the temp2_fault attribute for the
external temperature channel.
Also update the documentation to clarify that analog inputs in1 and in2
are not available when the external temperature sensor is enabled, and
remove the outdated statement claiming that external temperature support
and limit registers are unsupported.
The ADM1266 reports its firmware revision via the IC_DEVICE_REV
manufacturer-specific block-read command (0xAE, datasheet Rev. D
Table 80). The first three returned bytes are the firmware
major.minor.patch fields. This is useful when correlating field
behaviour against ADI release notes; expose it through debugfs
alongside the existing sequencer_state entry.
The standard PMBus MFR_REVISION (0x9B) register is already exposed
by pmbus_core's debugfs auto-create path and reports the
manufacturer revision, which is a separate thing from the firmware
running on the device.
Ronan Dalton [Thu, 14 May 2026 00:34:04 +0000 (12:34 +1200)]
hwmon: (nct7802) Add time step attributes for tweaking responsiveness
The nct7802 chip exposes two registers that allow setting the time
interval between successive duty increases or decreases in Smart Fan
mode. The units are intervals of 0.1 second. The default value at power
on is 10, so 1 second.
Add sysfs attributes for step_up_time and step_down_time to allow
controlling the responsiveness of the fan speed. Values are represented
as milliseconds to the user. When set, the value is clamped to the valid
range of 100 to 25500 (0.1 to 25.5 seconds), and rounded to the nearest
multiple of 100.
hwmon: Use named initializers for arrays of i2c_device_data
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify indention and usage of commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Flaviu Nistor [Sun, 10 May 2026 09:25:43 +0000 (12:25 +0300)]
hwmon: (tmp102) Use device_property_read_string API
Replace of_property_read_string() with the preferded
device_property_read_string() in the probe function to
read the device label property, improving the driver
compatibility since this method is not limited to
Device Tree only.
Also drop the now unnecessary __maybe_unused from tmp102_of_match.
Add hwmon driver for the ARCTIC Fan Controller, a USB HID device
(VID 0x3904, PID 0xF001) with 10 fan channels. Exposes fan speed in
RPM (read-only) and PWM duty cycle (0-255, read/write) via sysfs.
The device pushes IN reports at ~1 Hz containing RPM readings. PWM is
set via OUT reports; the device applies the new duty cycle and sends
back a 2-byte ACK (Report ID 0x02). The driver waits up to 1 s for
the ACK using a completion. Measured device latency: max ~563 ms over
500 iterations. PWM control is manual-only: the device never changes
duty cycle autonomously.
raw_event() may run in hardirq context, so fan_rpm[] is protected by
a spinlock with irq-save. pwm_duty[] is also protected by this spinlock
because reset_resume() clears it outside the hwmon core lock. The OUT
report buffer is built and write_pending is armed under the same lock so
that no reset_resume() can race with the pwm_duty[] snapshot. priv->buf
is exclusively accessed by write(), which the hwmon core serializes.
Add support for MAX20830 step-down DC-DC switching regulator with
PMBus interface. It allows monitoring of input/output voltage,
output current and temperature through the PMBus serial interface.
LM75 devices supported by this driver support configurable active-high
alert polarity. This is already documented in the devicetree description.
Add support for it to the driver.
Follow documentation and defensively enforce active-low if property is
not set. This avoids possible inconsistencies for future devices with
wrong parametrization. No API breakage as all current devices have
their parameters set to active-low.
The LM75 alert pin is asserted based on the value of alert polarity bit
of the configuration register. The device/driver default is 0 which means
alert pin is configured to be active-low. A value of 1 maps to inverted
(active-high).
Add an optional boolean property "ti,alert-polarity-active-high" to
override the alert pin polarity. When absent, the default active-low
polarity is kept.
hwmon: Move MODULE_DEVICE_TABLE next to the table itself
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Tabrez Ahmed [Sat, 2 May 2026 02:08:44 +0000 (07:38 +0530)]
hwmon: (ads7871) Use DMA-safe buffer for SPI writes
The driver currently passes a stack-allocated buffer to spi_write(),
which is incompatible with DMA on systems with CONFIG_VMAP_STACK
enabled.
Move the transfer buffer into the driver's private data structure
to ensure it is DMA-safe. Since this shared buffer now requires
serialization, this change depends on the previous commit which
migrated the driver to the hwmon 'with_info' API.
While moving the logic, also:
- Corrected the sign extension for 14-bit data by casting to s16.
- Scaled the output to millivolts (2500mV full scale
) to comply with the hwmon ABI.
Tabrez Ahmed [Sat, 2 May 2026 02:08:43 +0000 (07:38 +0530)]
hwmon: (ads7871) Convert to hwmon_device_register_with_info
Convert the ads7871 driver from the legacy hwmon_device_register() to the
modern hwmon_device_register_with_info() API. This migration simplifies
the driver by using the structured hwmon_channel_info approach and
prepares the codebase for the transition to a shared DMA-safe buffer.
While at it, fix checkpatch violations.
hwmon: emc2305: Support configurable fan PWM at shutdown
Some systems require fans to enter in a defined safe state during system
shutdown or reboot handoff.
Add support for the optional Device Tree property "fan-shutdown-percent"
to configure the shutdown PWM duty cycle per fan output.
If the property is present for a fan channel, the driver converts the
configured percentage value to the corresponding PWM duty cycle and
applies it during driver shutdown.
If the property is not present, the fan state remains unchanged.
The EMC2305 fan controller supports multiple independent PWM fan
outputs. Some systems require fans to enter a defined safe state
during system shutdown or reboot handoff, until firmware or the next
boot stage reconfigures the controller.
Add an optional "fan-shutdown-percent" property to fan child nodes
allowing the PWM duty cycle applied during shutdown to be configured
per fan output.
The fan channel index is used to access per-channel data structures.
Validate the index against the number of available channels
before use to prevent out-of-bounds access if an invalid
value is provided.
The thermal registration path currently uses a sequential child index,
which may not match the validated channel from DT. Use the DT "reg"
property when registering cooling devices to ensure consistent
channel handling
Linus Torvalds [Sun, 24 May 2026 19:50:36 +0000 (12:50 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Fix ITS EventID sanitisation when restoring an interrupt
translation table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
RISC-V:
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info() and
pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
s390:
- Fix bugs in vSIE (nested virtualization) and UCONTROL, caused by
the page table rewrite.
x86:
- Apply erratum #1235 workaround (disable AVIC IPI virtualization) on
Hygon Family 18h, just like on AMD Family 17h.
- When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM,
return the VM's configured APIC bus frequency instead of the
default. This is less confusing (read: not wrong) and makes it
easier to fill in CPUID information that communicates the APIC bus
frequency to the guest.
Selftests:
- Do not include glibc-internal <bits/endian.h>; it worked by chance
and broke building KVM selftests with musl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
KVM: selftests: Verify that KVM returns the configured APIC cycle length
KVM: x86: Return the VM's configured APIC bus frequency when queried
KVM: selftests: elf: Include <endian.h> instead of <bits/endian.h>
KVM: s390: Properly reset zero bit in PGSTE
KVM: s390: vsie: Fix redundant rmap entries
KVM: s390: vsie: Fix unshadowing logic
KVM: s390: Fix leaking kvm_s390_mmu_cache in case of errors
KVM: s390: vsie: Fix memory leak when unshadowing
KVM: arm64: Fix nVHE/pKVM hyp tracing error on invalid desc
KVM: arm64: vgic: Free private_irqs when init fails after allocation
KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits
RISC-V: KVM: Fix sign extension for MMIO loads
RISC-V: KVM: Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
riscv: kvm: return SBI_ERR_FAILURE for pmu_event_info() when OOM
riscv: kvm: return SBI_ERR_FAILURE for pmu_snapshot_set_shmem() when OOM
RISC-V: KVM: Fix invalid HVA warning in steal-time recording
Linus Torvalds [Sun, 24 May 2026 18:00:45 +0000 (11:00 -0700)]
Merge tag 'x86-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- On SEV guests, handle set_memory_{encrypted,decrypted}() failures
more conservatively by assuming that all affected pages are
unencrypted (Carlos López)
- Disable broadcast TLB flush when PCID is disabled (Tom Lendacky)
- Fix VMX vs. hrtimer_rearm_deferred() regression (Peter Zijlstra)
- Move IRQ/NMI dispatch code from KVM into x86 core, to prepare for a
KVM x2apic fix (Peter Zijlstra)
* tag 'x86-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sev-guest: Explicitly leak pages in unknown state
x86/mm: Disable broadcast TLB flush when PCID is disabled
x86/kvm/vmx: Fix VMX vs hrtimer_rearm_deferred()
x86/kvm/vmx: Move IRQ/NMI dispatch from KVM into x86 core
x86/vdso: Fix incorrect size in munmap() on map_vdso() failure
Linus Torvalds [Sun, 24 May 2026 17:55:21 +0000 (10:55 -0700)]
Merge tag 'irq-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irqchip driver fixes from Ingo Molnar:
- Fix the hardware probing error path of the renesas-rzt2h
irqchip driver
- Fix the exynos-combiner irqchip driver on -rt kernels
by turning the IRQ controller spinlock into a raw spinlock
* tag 'irq-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzt2h: Use pm_runtime_put_sync() in probe error path
irqchip/exynos-combiner: Switch to raw_spinlock
Linus Torvalds [Sun, 24 May 2026 17:48:55 +0000 (10:48 -0700)]
Merge tag 'core-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Ingo Molnar::
- Fix debugobjects regression on -rt kernels: don't fill the pool
(which uses a coarse lock) if ->pi_blocked_on, because that messes up
the priority inheritance of callers
* tag 'core-urgent-2026-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Do not fill_pool() if pi_blocked_on
Linus Torvalds [Sun, 24 May 2026 17:37:55 +0000 (10:37 -0700)]
Merge tag 'hwmon-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- adm1266: Various fixes from Abdurrahman Hussain
The fixed issues were reported by Sashiko as part of a code review of
a functional change in the driver.
- lenovo-ec-sensors: Convert to devm_request_region() to fix
release_region cleanup, and fix EC "MCHP" signature validation logic,
from Kean Ren
* tag 'hwmon-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/adm1266) serialize sequencer_state debugfs read with pmbus_lock
hwmon: (pmbus/adm1266) serialize NVMEM blackbox read with pmbus_lock
hwmon: (pmbus/adm1266) serialize GPIO PMBus accesses with pmbus_lock
hwmon: (pmbus/adm1266) register the nvmem device after pmbus_do_probe()
hwmon: (pmbus/adm1266) register the gpio_chip after pmbus_do_probe()
hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors
hwmon: (pmbus/adm1266) don't clobber GPIO bits before PDIO read in get_multiple
hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
hwmon: (pmbus/adm1266) include adapter number in GPIO line label
hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer
hwmon: (pmbus/adm1266) reject implausible blackbox record_count
hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX
hwmon: (pmbus/adm1266) seed timestamp from the real-time clock
hwmon: (lenovo-ec-sensors): Fix EC "MCHP" signature validation logic
hwmon: (lenovo-ec-sensors): Convert to devm_request_region()
drm/msm: Restore second parameter name in purge() and evict()
After commit 3392291fc509 ("drm/msm: Fix shrinker deadlock"), all
supported versions of clang warn (or error with CONFIG_WERROR=y):
drivers/gpu/drm/msm/msm_gem_shrinker.c:105:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions]
105 | purge(struct drm_gem_object *obj, struct ww_acquire_ctx *)
| ^
drivers/gpu/drm/msm/msm_gem_shrinker.c:117:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions]
117 | evict(struct drm_gem_object *obj, struct ww_acquire_ctx *)
| ^
2 errors generated.
With older but supported versions of GCC, this is an unconditional hard error:
drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'purge':
drivers/gpu/drm/msm/msm_gem_shrinker.c:105:35: error: parameter name omitted
purge(struct drm_gem_object *obj, struct ww_acquire_ctx *)
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'evict':
drivers/gpu/drm/msm/msm_gem_shrinker.c:117:35: error: parameter name omitted
evict(struct drm_gem_object *obj, struct ww_acquire_ctx *)
^~~~~~~~~~~~~~~~~~~~~~~
Restore the parameter name to clear up the warnings, renaming it
"unused" to make it clear it is only needed to satisfy the prototype of
drm_gem_lru_scan().
Linus Torvalds [Sun, 24 May 2026 16:53:17 +0000 (09:53 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix bpf_throw() and global subprog combination (Kumar Kartikeya
Dwivedi)
- Fix out of bounds access in BPF interpreter (Yazhou Tang)
- Fix potential out of bounds access in inner per-cpu array map
(Guannan Wang)
- Reject NULL data/sig in bpf_verify_pkcs7_signature (KP Singh)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: fix off-by-one in emit_signature_match jump offset
bpf: Reject NULL data/sig in bpf_verify_pkcs7_signature
selftests/bpf: Cover global subprog exception leaks
bpf: Check global subprog exception paths
bpf: make bpf_session_is_return() reference optional
bpf: Use array_map_meta_equal for percpu array inner map replacement
selftests/bpf: Add test for large offset bpf-to-bpf call
bpf: Fix s16 truncation for large bpf-to-bpf call offsets
bpf: Fix out-of-bounds read in bpf_patch_call_args()
Linus Torvalds [Sat, 23 May 2026 23:59:02 +0000 (16:59 -0700)]
Merge tag 'v7.1-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix for creating tmpfiles
- fix durable reconnect error path
- validate SID in security descriptor when inheriting DACL
* tag 'v7.1-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb/server: promote S_DEL_ON_CLS to S_DEL_PENDING when close
ksmbd: validate SID in parent security descriptor during ACL inheritance
ksmbd: fix durable reconnect error path file lifetime
Linus Torvalds [Sat, 23 May 2026 23:54:48 +0000 (16:54 -0700)]
Merge tag 'for-7.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A batch of fixes to simple quotas:
- add conditional rescheduling point not dependent on the lock during
inode iterations to avoid delays with PREEMPT_NONE enabled
- fix subvolume deletion so it does not break the squota invariants
- properly handle enabling squota, tracking extents in the initial
transaction
- catch and warn about underflows, clamp to zero to avoid further
problems
And one fix to inode size handling:
- fix handling of preallocated extents beyond i_size when not using
the no-holes feature"
* tag 'for-7.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: swallow btrfs_record_squota_delta() ENOENT
btrfs: clamp to avoid squota underflow
btrfs: fix squota accounting during enable generation
btrfs: check for subvolume before deleting squota qgroup
btrfs: always drop root->inodes lock before cond_resched()
btrfs: mark file extent range dirty after converting prealloc extents
Linus Torvalds [Sat, 23 May 2026 23:51:22 +0000 (16:51 -0700)]
Merge tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Carlos Maiolino:
"A single fix for a race in xfs buffer cache which may lead to
filesystem shutdown due to inconsistent metadata if the buffer
lookup happens to find an old dead buffer still in the cache"
* tag 'xfs-fixes-7.1-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix a buffer lookup against removal race
Linus Torvalds [Sat, 23 May 2026 16:21:08 +0000 (09:21 -0700)]
Merge tag 'nios2_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull nios2 fixes from Dinh Nguyen:
- Implement _THIS_IP_ for inline asm
- Add Simon Schuster as a maintainer and mark the NIOS2 as Supported
* tag 'nios2_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Implement _THIS_IP_ using inline asm
MAINTAINERS: arch/nios2: Add Simon Schuster as co-maintainer
Linus Torvalds [Sat, 23 May 2026 16:13:00 +0000 (09:13 -0700)]
Merge tag 'loongarch-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Rework KASLR to avoid initrd overlap, remove some unused code to avoid
a build warning, fix some bugs in kprobes and KVM"
* tag 'loongarch-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Move some variable declarations to paravirt.h
LoongArch: kprobes: Fix handling of fatal unrecoverable recursions
LoongArch: kprobes: Use larch_insn_text_copy() to patch instructions
LoongArch: Remove unused code to avoid build warning
LoongArch: Avoid initrd overlap during kernel relocation
LoongArch: Skip relocation-time KASLR if already applied
efi/loongarch: Randomize kernel preferred address for KASLR
KP Singh [Fri, 22 May 2026 21:53:36 +0000 (23:53 +0200)]
libbpf: fix off-by-one in emit_signature_match jump offset
The offset for the cleanup-label jump is computed before the MOV R7
instruction is emitted, but the JMP lands after it. Account for the
extra insn in the offset calculation (-2 instead of -1). Drop the
redundant self-loop in the else branch; gen->error = -ERANGE already
marks the generation as failed.
Linus Torvalds [Sat, 23 May 2026 14:49:05 +0000 (07:49 -0700)]
Merge tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Remove the software node on platform device release(); without this,
the software node remains registered after the device is gone and a
subsequent platform_device_register_full() reusing the same node
fails with -EBUSY
- In sysfs_update_group(), do not remove a pre-existing directory when
create_files() fails; the previous code would silently destroy a
sysfs group that the caller did not create
- Set fwnode->secondary to NULL in fwnode_init() to avoid dereferencing
uninitialized memory (e.g. in dev_to_swnode()) when the firmware node
is allocated on the stack or via a non-zeroing allocator
* tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
device property: set fwnode->secondary to NULL in fwnode_init()
sysfs: don't remove existing directory on update failure
driver core: platform: remove software node on release()
Linus Torvalds [Sat, 23 May 2026 14:17:27 +0000 (07:17 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- syzbot triggred crash in rxe due to concurrent plug/unplug
- Possible non-zero'd memory exposed to userspace in bnxt_re
- Malicous 'magic packet' with SIW causes a buffer overflow
- Tighten the new uAPI validation code to not crash in debugging prints
and have the right module dependencies in drivers
- mana was missing the max_msg_sz report to userspace
- UAF in rtrs on an error path
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rtrs: Fix use-after-free in path file creation cleanup
RDMA/mana_ib: Report max_msg_sz in mana_ib_query_port
RDMA/core: Do not read wild stack memory in uverbs_get_handler_fn()
RDMA/core: Move the _ib_copy_validate_udata* functions to ib_core_uverbs
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
RDMA/bnxt_re: zero shared page before exposing to userspace
selftests/rdma: explicitly skip tests when required modules are missing
RDMA/nldev: Add mutual exclusion in nldev_dellink()
Tina Zhang [Fri, 22 May 2026 04:00:14 +0000 (12:00 +0800)]
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated.
Fixes: 8de4a1c8164e ("KVM: SVM: Disable (x2)AVIC IPI virtualization if CPU has erratum #1235") Cc: <stable@vger.kernel.org> Signed-off-by: Tina Zhang <zhang_wei@open-hieco.net>
Message-ID: <20260522040014.3380201-1-zhang_wei@open-hieco.net>
KVM: selftests: Verify that KVM returns the configured APIC cycle length
Add checks in the APIC bus clock test to verify that querying
KVM_CAP_X86_APIC_BUS_CYCLES_NS on the VM after changing the frequency
returns the VM's actual APIC cycle length, not KVM's default. For
giggles, verify that KVM still returns its default frequency for the
system-scoped check.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Return the VM's configured APIC bus frequency when queried
When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM, return the
VM's configured APIC bus frequency, not KVM's default. Aside from the fact
that returning the default frequency is blatantly wrong if userspace has
changed the frequency, returning the configured frequency means userspace
can blindly trust the result, e.g. when filling PV CPUID information that
communicates the APIC bus frequency to the guest.
Fixes: 6fef518594bc ("KVM: x86: Add a capability to configure bus frequency for APIC timer") Reported-by: David Woodhouse <dwmw2@infradead.org> Closes: https://lore.kernel.org/all/ab84153e33fbe7c25667f595c56b310d4d5a93ef.camel@infradead.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sat, 23 May 2026 08:04:35 +0000 (10:04 +0200)]
Merge tag 'kvm-riscv-fixes-7.1-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 7.1, take #1
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info()
and pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
Linus Torvalds [Fri, 22 May 2026 23:43:33 +0000 (16:43 -0700)]
Merge tag 'sched_ext-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Spurious WARN in ops_dequeue() racing with concurrent dispatch
- Self-deadlock between scheduler disable and a concurrent sub-sched
enable
* tag 'sched_ext-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix spurious WARN on stale ops_state in ops_dequeue()
sched_ext: Fix deadlock between scx_root_disable() and concurrent forks
Linus Torvalds [Fri, 22 May 2026 23:28:47 +0000 (16:28 -0700)]
Merge tag 'cgroup-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Two rstat fixes:
- Out-of-bounds access in the css_rstat_updated() BPF kfunc when
called with an unchecked user-supplied cpu
- Over-strict NMI guard after the recent switch to try_cmpxchg left
sparc and ppc64 unable to queue rstat updates from NMI"
* tag 'cgroup-for-7.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: rstat: relax NMI guard after switch to try_cmpxchg
cgroup/rstat: validate cpu before css_rstat_cpu() access
Linus Torvalds [Fri, 22 May 2026 23:15:32 +0000 (16:15 -0700)]
Merge tag 'drm-fixes-2026-05-23' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes pull, amdgpu/xe being the usual, with bonus msm content
to bulk things out, otherwise it has the usual scattered changes, with
amdxdna dropping a badly thought out userspace api.
gem:
- clean up LRU locking
msm:
- Core:
- Fixed bindings for SM8650, SM8750 and Eliza
- Don't use UTS_RELEASE directly
- Fix typo in clock-names property
- DPU:
- Fixed CWB description on Kaanapali
- Fixed scanline strides for YUV UBWC formats
- Stopped DSI register dumping to access past the end of region
- DSI:
- Fix dumping unaligned regions
- GPU:
- Fix GMEM_BASE for a6xx gen3
- Fix userspace reachable crash on a2xx-a4xx
- Fix sysprof_active for counter collection with IFPC enabled GPUs
- Fix shrinker lockdep
xe:
- SRIOV related fixes
- Fix leak and double-free
- Multi-cast register fixes
- Multi-queue fix
i915:
- Fix joiner color pipeline selection [display]
- Fix readback for target_rr in Adaptive Sync SDP [dp]
- Apply Intel DPCD workaround when SDP on prior line used [psr]
amdxdna:
- remove mmap and export for ubuf
bridge:
- chipone-icn6211: managed bridge cleanup
- lt66121: acquire reset GPIO
- megachips: fix clean up on failed IRQ requests
v3d:
- fix UAF in error code paths
- release GEM-object ref on free'd jobs
virtio:
- use uninterruptible resv locking in plane updates
mediatek:
- fix sparse warnings"
* tag 'drm-fixes-2026-05-23' of https://gitlab.freedesktop.org/drm/kernel: (78 commits)
drm/xe/oa: Fix exec_queue leak on width check in stream open
drm/virtio: use uninterruptible resv lock for plane updates
drm/amdgpu: fix handling in amdgpu_userq_create
drm/radeon/evergreen_cs: Add missing NULL prefix check in surface check
drm/amdgpu: userq_va_mapped should remain true once done
drm/amdgpu: avoid integer overflow in VA range check
drm/amd/ras: Fix UMC error address allocation leak
drm/amdgpu: unmap all user mappings of framebuffer and doorbell before mode1 reset
drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async
drm/amd/display: Validate GPIO pin LUT table size before iterating
drm/amd/display: Fix integer overflow in bios_get_image()
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
drm/amdgpu: use atomic operation to achieve lockless serialization
drm/amdkfd: Check bounds on allocate_doorbell
drm/amdgpu/vce3: Fix VCE 3 firmware size and offsets
drm/amdgpu/vce2: Fix VCE 2 firmware size and offsets
drm/amdgpu/vce1: Stop using amdgpu_vce_resume
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
drm/amdgpu/vce1: Don't repeat GTT MGR node allocation
drm/amdgpu/vce1: Check if VRAM address is lower than GART.
...
Linus Torvalds [Fri, 22 May 2026 23:08:06 +0000 (16:08 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small fixes, two in drivers and the remaining a sign conversion probem
in sd with no user visible consequences (non-zero is error)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: tcm_loop: Fix NULL ptr dereference
scsi: isci: Fix use-after-free in device removal path
scsi: sd: Fix return code handling in sd_spinup_disk()
- hp-wmi:
- Add thermal support for Omen 16-c0xxx (board 8902)
- intel/vsec:
- Fix enable_cnt imbalance due to PCIe error recovery
- surface/aggregator_registry:
- Remove battery & AC nodes on Surface Laptop 7 to avoid duplicated
devices
- uniwill-laptop:
- Handle uninitialized and invalid charging threshold values
- Accept charging threshold of 0 through power supply sysfs ABI and
clamp it to 1
- Make 'force' parameter to work also when device descriptor is
found
- Do not enable charging limit despite the 'force' parameter to
avoid permanent damage to battery
* tag 'platform-drivers-x86-v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (35 commits)
platform/x86: bitland-mifs-wmi: add CONFIG_LEDS_CLASS dependency
platform/x86: wireless-hotkey: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_haps: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_bluetooth: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_acpi: Check ACPI_COMPANION() against NULL
platform/x86: system76: Check ACPI_COMPANION() against NULL
platform/x86: sony-laptop: Check ACPI_COMPANION() against NULL
platform/x86: panasonic-laptop: Check ACPI_COMPANION() against NULL
platform/x86: lg-laptop: Check ACPI_COMPANION() against NULL
platform/x86: intel/smartconnect: Check ACPI_HANDLE() against NULL
platform/x86: intel/rst: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu-tablet: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu: Check ACPI_COMPANION() against NULL
platform/x86: eeepc-laptop: Check ACPI_COMPANION() against NULL
platform/x86: dell/dell-rbtn: Check ACPI_COMPANION() against NULL
platform/x86: asus-laptop: Check ACPI_COMPANION() against NULL
platform/x86: acer-wireless: Check ACPI_COMPANION() against NULL
platform/x86: asus-armoury: add support for GU605CP
platform/x86: asus-armoury: add support for FA401EA
platform/x86: asus-armoury: add support for G614FR
...
Linus Torvalds [Fri, 22 May 2026 20:19:41 +0000 (13:19 -0700)]
Merge tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Another batch of driver fixes from Johan fixing error handling paths,
plus another from Felix. We also have a new device ID added in the DT
bindings for SpacemiT K3"
* tag 'spi-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: fsl-qspi: support SpacemiT K3
spi: ti-qspi: fix use-after-free after DMA setup failure
spi: sprd: fix error pointer deref after DMA setup failure
spi: qup: fix error pointer deref after DMA setup failure
spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache()
spi: ep93xx: fix error pointer deref after DMA setup failure
Linus Torvalds [Fri, 22 May 2026 20:17:29 +0000 (13:17 -0700)]
Merge tag 'regulator-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes here, one very minor Kconfig fix and a fix for a
nasty issue with error reporting in the tps65219 driver"
* tag 'regulator-fix-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: fix irq_data.rdev not being assigned
regulator: Kconfig: fix a typo in help
Linus Torvalds [Fri, 22 May 2026 19:28:47 +0000 (12:28 -0700)]
Merge tag 'gpio-fixes-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- propagate the error code from regulator_enable() in resume path in
gpio-pca953x
- take the device lock when calling device_is_bound() in virtual GPIO
drivers
- fix software node leak in remove path in gpio-aggregator
- fix a potential use-after-free in gpio-aggregator
- harden the GPIO character device uAPI: check that line config
attributes are correctly zeroed
* tag 'gpio-fixes-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: lock device when calling device_is_bound()
gpio: aggregator: lock device when calling device_is_bound()
gpio: sim: lock device when calling device_is_bound()
gpio: aggregator: remove the software node when deactivating the aggregator
gpio: aggregator: fix a potential use-after-free
gpio: cdev: check if uAPI v2 config attributes are correctly zeroed
gpio: pca953x: propagate regulator_enable() error from resume
Linus Torvalds [Fri, 22 May 2026 19:22:22 +0000 (12:22 -0700)]
Merge tag 'sound-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As expected, we still continue receiving lots of small fixes.
One major change is about HD-audio pending IRQ handling, but this
would influence only on odd machines or slow VMs. There are a few
other fixes for the core part, but most of them are not-too-serious
UAF fixes, while the rest are mostly device-specific fixes and quirks.
ALSA Core:
- Fix for PCM silencing with bogus iov_iter
- Fixes for past-the-end iterators in timer and seq
- Serialization of UMP output teardown
- Rate-limit ELD parsing errors
HD-audio:
- Fixes for IRQ work handling and SSID matching
- Various Realtek quirks for HP and ASUS laptops, including LED fixes
ASoC:
- Intel: ACPI match table updates for PTL, NVL, and ARL platforms
- Cirrus Logic: Fixes for cs-amp-lib and cs35l56 codecs
- Various platform fixes for AMD, FSL SAI, TI OMAP, and Qualcomm
- DT-binding fix for MediaTek
Others:
- USB ua101: Reject too-short USB descriptors
- Scarlett2: Fix for flash writes
- ASIHPI: Fix for potential OOB access
- AMD SPI: Fix for bus number in ACPI probe
MAINTAINERS:
- Updates for SOF and TI maintainers"
* tag 'sound-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (47 commits)
ASoC: codecs: pcm512x: fix null-ptr dereference in pcm512x_overclock_xxx_put()
ASoC: Intel: soc-acpi-intel-ptl-match: Remove unnecessary cs42l43 match
ASoC: soc-acpi-intel-ptl-match: Make Chrome matches conditional
ASoC: Intel: soc-acpi: Add entry for sof_es8336 in NVL match table.
ASoC: Intel: sof_sdw: Add support for nvlrvp in NVL platform
ASoC: cs-amp-lib: Fix typo in error message: write -> read
ASoC: cs-amp-lib: Fix missing dput() after debugfs_lookup()
ASoC: cs-amp-lib: Fix wrong sizeof() in _cs_amp_set_efi_calibration_data()
ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()
MAINTAINERS: ASoC: Intel/SOF: Remove Ranjani Sridharan as maintainer
ALSA: seq: Serialize UMP output teardown with event_input
ALSA: scarlett2: Allow flash writes ending at segment boundary
ALSA: hda/realtek: Add LED quirk for HP ProBook 430 G6
ALSA: hda/intel: Make sure to cancel irq-pending work at closing PCM stream
ALSA: hda: Move irq pending work into hda-intel stream
ASoC: soc-utils: Add missing va_end in snd_soc_ret()
ALSA: ua101: Reject too-short USB descriptors
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP 16 Piston OmniBook X
ALSA: seq: avoid past-the-end iterator in snd_seq_create_port()
ALSA: timer: avoid past-the-end iterator in snd_timer_dev_register()
...
Linus Torvalds [Fri, 22 May 2026 19:06:23 +0000 (12:06 -0700)]
Merge tag 'block-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix memory leak for peer-to-peer addresses
- Fix dma map leaks on resource errors
- Another bio integrity fix, fixing a recent regression
- Fix for an issue with the request pre-allocation and caching when IO
is queued, where if a bio split occurred and ended up blocking, the
list could be corrupted
* tag 'block-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: avoid use-after-free in disk_free_zone_resources()
blk-mq: pop cached request if it is usable
nvme-pci: fix dma mapping leak on data setup error
nvme-pci: fix dma_vecs leak on p2p memory
bio-integrity-fs: pass data iter to bio_integrity_verify()
Linus Torvalds [Fri, 22 May 2026 18:53:28 +0000 (11:53 -0700)]
Merge tag 'io_uring-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for an issue with IORING_OP_NOP and using injection results
- Fix for an issue in IORING_OP_WAITID, where the info state was
assumed cleared by the lower level syscall handler, but for some
cases it is not. Just clear the data upfront, so that non-initialized
data isn't copied back to userspace
- Fix for a lockdep reported issue, where IORING_OP_BIND enters file
create and hence hits mnt_want_write(), which creates a three part
lockdep cycle between the super lock, io_uring's uring_lock, and the
cred mutex
- Fix a regression introduced in this cycle with how linked timeouts
are deleted
- Ensure that the ->opcode nospec indexing on the opcode issue side
covers all the cases
* tag 'io_uring-7.1-20260522' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/nop: pass all errors to userspace
io_uring/timeout: splice timed out link in timeout handler
io_uring: propagate array_index_nospec opcode into req->opcode
io_uring/waitid: clear waitid info before copying it to userspace
io_uring/net: punt IORING_OP_BIND async if it needs file create
Linus Torvalds [Fri, 22 May 2026 17:52:26 +0000 (10:52 -0700)]
Merge tag 'v7.1-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix missing lock
- Fix dentry in use after unmounting
- cifs.upcall security fix
- require CAP_NET_ADMIN for swn netlink
- change allocation in DUP_CTX_STR to GFP_KERNEL
- minor smbdirect debug fix
- handle_read_data() folio fix
* tag 'v7.1-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: change allocation requirements in DUP_CTX_STR macro
smb: client: require net admin for CIFS SWN netlink
smb: smbdirect: divide, not multiply, milliseconds by 1000
cifs: Fix busy dentry used after unmounting
smb: client: use data_len for SMB2 READ encrypted folioq copy
smb: client: reject userspace cifs.spnego descriptions
smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked()
Linus Torvalds [Fri, 22 May 2026 14:13:13 +0000 (07:13 -0700)]
Merge tag 'pm-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix maximum frequency computation in the intel_pstate driver for
two processor models, update its documentation and fix issues related
to the dynamic EPP support (added during the current development
cycle) in the amd-pstate driver:
- Fix maximum frequency computation in the intel_pstate driver for
Raptor Lake-E and Bartlett Lake that are SMP platforms derived from
hybrid ones (Rafael Wysocki, Henry Tseng)
- Fix the description of asymmetric packing with SMT in the
intel_pstate driver documentation (Ricardo Neri)
- Fix multiple amd-pstate driver issues related to dynamic EPP
support added recently, including making it opt-in only (K Prateek
Nayak, Mario Limonciello)"
* tag 'pm-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Drop Kconfig option for dynamic EPP
cpufreq: intel_pstate: Use HYBRID_SCALING_FACTOR_ADL for Bartlett Lake
cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E
Documentation: intel_pstate: Fix description of asymmetric packing with SMT
cpufreq/amd-pstate-ut: Drop policy reference before driver switch
cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled
cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset
cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified
cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name
cpufreq/amd-pstate: Grab "amd_pstate_driver_lock" when toggling dynamic_epp
Linus Torvalds [Fri, 22 May 2026 14:06:21 +0000 (07:06 -0700)]
Merge tag 'acpi-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"Unbreak system wakeup on critical battery status in the ACPI battery
driver inadvertently broken during the 7.0 development cycle"
* tag 'acpi-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix system wakeup on critical battery status
Damien Le Moal [Fri, 22 May 2026 11:56:22 +0000 (20:56 +0900)]
block: avoid use-after-free in disk_free_zone_resources()
The function disk_update_zone_resources() may call
disk_free_zone_resources() in case of error, and following this,
blk_revalidate_disk_zones() will again calls disk_free_zone_resources() if
disk_update_zone_resources() failed. If a zone worker thread is being used
(which is the default for a rotational media zoned device),
disk_free_zone_resources() will try to stop the zone worker thread twice
because disk->zone_wplugs_worker is not reset to NULL when the worker
thread is stopped the first time.
In disk_free_zone_resources(), fix this by correctly clearing
disk->zone_wplugs_worker to NULL when the worker thread is stopped.
And while at it, since disk_free_zone_resources() is always called after a
failed call to disk_update_zone_resources(), remove the unnecessary call
to disk_free_zone_resources() in disk_update_zone_resources().
Fixes: 1365b6904fd0 ("block: allow submitting all zone writes from a single context") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260522115622.588535-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 22 May 2026 13:53:11 +0000 (06:53 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Handle probe on hinted conditional branch instructions.
BC.cond instructions can be simulated in the same way as B.cond
instructions, so extend the decode mask for B.cond to cover BC.cond
- Flush the walk cache when unsharing PMD tables. Recent changes to
huge_pmd_unshare() introduced mmu_gather::unshared_tables but the
arm64 code was still treating the TLB flushing as only targeting leaf
entries (TLBI VALE1IS).
Fix it by using non-leaf-only instructions (TLBI VAE1IS) when
tlb->unshared_tables is set
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Flush walk cache when unsharing PMD tables
arm64: probes: Handle probes on hinted conditional branch instructions
Linus Torvalds [Fri, 22 May 2026 13:40:31 +0000 (06:40 -0700)]
Merge tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PAI NNPA mismatch between counting and recording, where sampling
reports twice the value
- Fix loss of PAI counter increments during recording on systems with
many CPUs under heavy load, while counting is not affected
- On some supported machines, CHSC cannot access memory outside the DMA
zone, causing CHSC command failures. Restore GFP_DMA flag when
allocating memory for CHSC control blocks
- Align the numbering scheme for higher-level topology structures like
socket, book, drawer with other hardware identifiers e.g. in sysfs,
procfs and tools like lscpu
* tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: Use zero-based numbering for containing entities
s390/cio: Restore GFP_DMA for CHSC allocation
s390/pai: Fix missing PAI counter increments under heavy load
s390/pai: Disable duplicate read of kernel PAI counter value
Linus Torvalds [Fri, 22 May 2026 13:23:56 +0000 (06:23 -0700)]
Merge tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix for a missing cpus_read_lock in one of the cpu sheaves
flushing paths (Qing Wang)
* tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: hold cpus_read_lock around flush_rcu_sheaves_on_cache()
Linus Torvalds [Fri, 22 May 2026 13:16:00 +0000 (06:16 -0700)]
Merge tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two minor updates for the DMA-mapping code, mainly fixing some rare
corner cases (Petr Tesarik, Jianpeng Chang)"
* tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: move dma_map_resource() sanity check into debug code
dma-direct: fix use of max_pfn
Linus Torvalds [Fri, 22 May 2026 13:09:58 +0000 (06:09 -0700)]
Merge tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Avoid NULL return from hist_field_name()
The function hist_field_name() is directly passed to a strcat() which
does not handle "NULL" characters. Return a zero length string when
size is greater than the limit.
This is used only to output already created histograms and no field
currently is greater than the limit. But it should still not return
NULL.
- Do not call map->ops->elt_free() on allocation failure
When elt_alloc() fails, it should not call the map->ops->elt_free()
function if it exists, as that function may not be able to handle the
free on allocation failures. The ->elt_free() should only be called
when elt_alloc() succeeds.
* tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
tracing: Avoid NULL return from hist_field_name() on truncation
The newly added driver requires the LED classdev support
and causes a link failure when that is disabled:
x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe':
bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext'
Fixes: dc1ec4fa86b2 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
device property: set fwnode->secondary to NULL in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization.
Cc: stable <stable@kernel.org> Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zeng Heng [Thu, 21 May 2026 07:30:11 +0000 (15:30 +0800)]
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only |
Claudio Imbrenda [Tue, 19 May 2026 15:01:14 +0000 (17:01 +0200)]
KVM: s390: Properly reset zero bit in PGSTE
In case of memory pressure, it's possible that a guest page gets freed
and then almost immediately reused by the guest. If CMMA is enabled,
_essa_clear_cbrl() will discard all pages that are either unused or
zero. If a discarded page is reused before _essa_clear_cbrl() is called,
and the pgste.zero bit is not cleared, the page will be discarded
despite not being unused.
When calling _gmap_ptep_xchg(), always clear the pgste.zero bit. This
prevents the page from being accidentally discarded when not unused.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Claudio Imbrenda [Tue, 19 May 2026 15:01:13 +0000 (17:01 +0200)]
KVM: s390: vsie: Fix redundant rmap entries
The address passed to the gmap rmap was not being masked. As a
consequence several different (but functionally equivalent) rmap
entries were being created for each shadowed table.
Fix this by properly masking the address depending on the table level.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Claudio Imbrenda [Tue, 19 May 2026 15:01:12 +0000 (17:01 +0200)]
KVM: s390: vsie: Fix unshadowing logic
In some cases (i.e. under extreme memory pressure on the host),
attempting to shadow memory will result in the same memory being
unshadowed, causing a loop.
Add a PGSTE bit to distinguish between shadowed memory and shadowed DAT
tables, fix the unshadowing logic in _gmap_ptep_xchg() to prevent
unnecessary unshadowing and perform better checks.
Also fix the unshadowing logic in _gmap_crstep_xchg_atomic() which did
not unshadow properly when the large page would become unprotected.
Opportunistically add a check in gmap_protect_rmap() to make sure it
won't be called with level == TABLE_TYPE_PAGE_TABLE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Bibo Mao [Fri, 22 May 2026 07:05:12 +0000 (15:05 +0800)]
LoongArch: KVM: Move some variable declarations to paravirt.h
Some variables relative with paravirt feature are declared in the header
file asm/qspinlock.h, however this file can be included only when option
CONFIG_SMP is on. There is compiling warnings if CONFIG_SMP is off since
variables are not declared.
Move these variable declarations to header file asm/paravirt.h to avoid
compiling warnings.
Fixes: c43dce6f13fb ("LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202605061313.O8Hswm2b-lkp@intel.com/ Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Fri, 22 May 2026 07:05:07 +0000 (15:05 +0800)]
LoongArch: kprobes: Fix handling of fatal unrecoverable recursions
KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that
can not be safely recovered in kprobes.
KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At
this point, the architecture-specific single-step context is already
active. Nested single-stepping would corrupt the state, as the kprobe
control block (kcb) and hardware registers cannot safely store multiple
levels of stepping state.
KPROBE_REENTER means that a third-level recursion occurs when a probe
is hit while the system is already handling a nested probe (second-
level). The kcb only provides a single slot (prev_kprobe) to backup the
state. When a third probe is hit, there is no more space to save the
state without corrupting the first-level backup.
Kprobes work by replacing instructions with breakpoints. In order to
execute the original instruction and continue, it must be moved to a
temporary "single-step" slot. Since there is no backup space left to
set up this slot safely, the CPU would be forced to return to the same
original breakpoint address, triggering an endless loop.
Currently, the code only prints a warning and returns. This leads to
an infinite re-entry loop as the CPU repeatedly hits the same trap and
a "stuck" CPU core because preemption was disabled at the start of the
handler and never re-enabled in this early return path.
Fix the logic by:
1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent
fatal recursions that cannot be safely recovered.
2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This
aligns LoongArch with other architectures (x86, arm64, riscv) and
prevents stack overflow while providing diagnostic information.
Tiezhu Yang [Fri, 22 May 2026 07:05:07 +0000 (15:05 +0800)]
LoongArch: kprobes: Use larch_insn_text_copy() to patch instructions
On SMP systems, kprobe handlers would occasionally fail to execute on
certain CPU cores. The issue is hard to reproduce and typically occurs
randomly under high system load.
The root cause is a software-side instruction hazard. According to the
LoongArch Reference Manual, while the cache coherency is maintained by
hardware, software must explicitly use the "IBAR" instruction to ensure
the instruction fetch unit (IFU) observes the effects of recent stores.
The current arch_arm_kprobe() and arch_disarm_kprobe() only execute the
"IBAR" barrier (via flush_insn_slot -> local_flush_icache_range) on the
local CPU. This leaves a vulnerable window where remote CPU cores may
continue executing stale instructions from their pipelines or prefetch
buffers, as they have not executed an "IBAR" since the code modification.
Switch to larch_insn_text_copy() to fix this:
1. Synchronization: It uses stop_machine_cpuslocked() to synchronize all
online CPUs, ensuring no CPU is executing the target code area during
modification.
2. Visibility: By passing cpu_online_mask to stop_machine_cpuslocked(),
the callback text_copy_cb() is executed on all online cores. Each CPU
core invokes local_flush_icache_range() to execute "IBAR", clearing
instruction hazards system-wide and ensuring the "break" instruction
is visible to the fetch units of all cores.
3. Robustness: It properly manages memory write permissions (ROX/RW) for
the kernel text segment during patching, ensuring compatibility with
CONFIG_STRICT_KERNEL_RWX.
Takashi Iwai [Fri, 22 May 2026 06:25:18 +0000 (08:25 +0200)]
Merge tag 'asoc-fix-v7.1-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
A bigger batch of fixes than usual due to -next not happeing last week,
this is mostly stuff for laptops - a lot of quirks and small fixes,
mainly for x86 and SoundWire. Nothing too big or exciting individually,
just two week's worth.
projects / thirdparty / kernel / linux.git / log
