Dave Airlie [Tue, 17 Mar 2026 01:27:01 +0000 (11:27 +1000)]
Merge tag 'drm-intel-next-2026-03-16' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
[airlied: fixed conflict with xe tree]
drm/i915 feature pull for v7.1:
Features and functionality:
- C10/C20/LT PHY PLL divider verification (Mika)
- Use trans push mechanism to generate PSR frame change event on LNL+ (Jouni)
- Account for DSC bubble overhead for horizontal slices (Ankit, Chaitanya)
Refactoring and cleanups:
- Refactor DP DSC slice config computation (Imre)
- Use GVT versions of register helper macros for GVT MMIO table (Ankit)
- C10/C20/LT PHY PLL computation refactoring (Mika)
- VGA decode refactoring and related fixes/cleanups (Ville)
- Move DSB buffer buffer implementation to display parent interface (Jani)
- Move error interrupt capture to display irq snapshot (Jani)
- Move pcode calls to display parent interface (Jani)
- Reduce GVT dependency on display headers (Jani)
- Compute config and mode valid refactoring for DSC (Ankit)
- Stop using i915 core register headers in display (Uma)
- Refactor DPT, move i915 parts to display parent interface (Jani)
- Refactor gen2-4 overlay, move to display parent interface (Ville)
- Refactor masked field register macro helpers, move to shared headers (Jani)
- Convert a number of workaround checks to the new workaround framework (Luca)
- Refactor and move frontbuffer calls to display parent interface (Jani)
- Add VMA calls to display parent interface (Jani)
- Refactor stolen memory allocation decisions (Vinod, Ville)
- Clean up and unify workqueue usage (Marco Crivellari)
- Preparation for UHBR DP tunnels (Imre)
- Allow DSC passthrough modes during DP MST mode validation (Imre)
- Move framebuffer bo interface to display parent interface (Jani)
Fixes:
- Plenty of DP SST HPD IRQ handling fixes (Imre)
- DP AUX backlight and luminance control fixes (Suraj)
- Respect VBT pipe joiner disable for eDP (Ankit)
- Do not use CASF with joiner (Nemesa)
- Clear C10/C20 PHY response read and error bit to avoid PHY hangs (Suraj)
- Xe3p_LPD DMG clock gating, CDCLK, port sync workarounds (Suraj, Gustavo, Mitul)
- Fix GVT error path (Michał)
- Handle errors on DP DSC receiver cap reads (Suraj)
- DSS clock gating workaround on MTL+ to avoid DSC corruption (Mika)
- Skip state verification for LT PHY in TBT mode (Suraj)
- Fix NULL pointer dereference on suspend when uc firmware not loaded (Rahul Bukte)
- Fix an unlikely DMC state related NULL pointer dereference at probe (Imre)
- Handle error returns from vga_get_uninterruptible() (Simon Richter)
- Increase C10/C20/LT PHY timeouts to include SOC/OS turnaround (Arun)
- Fix BIOS FB vs. stolen memory size check (Ville)
- Fix LOBF to use computed guardband and set context latency (Ankit)
- Handle modeset WW mutex lock failures due to contention properly (Imre)
- Fix pipe BPP clamping due to HDR (Imre)
- Fix stale state usage in DSC state computation (Imre)
- Take HDCP 1.4 vs 2.x into account during link check (Suraj)
- Fix forced link retrain handling in MST HPD IRQ handler (Imre)
- Remove redundant warning on vcpi < 0 (Jonathan)
Core changes:
- iopoll: fix function parameter names in read_poll_timeout_atomic() (Randy Dunlap)
Jani Nikula [Wed, 11 Mar 2026 14:18:18 +0000 (16:18 +0200)]
drm/{i915,xe}: move framebuffer bo to parent interface
Add .framebuffer_init, .framebuffer_fini and .framebuffer_lookup to the
bo parent interface. While they're about framebuffers, they're
specifically about framebuffer objects, so the bo interface is a good
enough fit, and there's no need to add another interface struct.
Jani Nikula [Wed, 11 Mar 2026 14:18:16 +0000 (16:18 +0200)]
drm/{i915, xe}/bo: move display bo calls to parent interface
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].
Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.
Dave Airlie [Mon, 16 Mar 2026 06:50:47 +0000 (16:50 +1000)]
Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-12:
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
Dave Airlie [Mon, 16 Mar 2026 02:21:06 +0000 (12:21 +1000)]
Merge tag 'drm-xe-next-2026-03-12' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- add VM_BIND DECOMPRESS support and on-demand decompression (Nitin)
- Allow per queue programming of COMMON_SLICE_CHICKEN3 bit13 (Lionel)
Cross-subsystem Changes:
- Introduce the DRM RAS infrastructure over generic netlink (Riana, Rodrigo)
Dave Airlie [Sun, 15 Mar 2026 23:10:13 +0000 (09:10 +1000)]
Merge tag 'drm-intel-gt-next-2026-03-12' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
Fixes/improvements/new stuff:
- Fix potential overflow of shmem scatterlist length (Janusz Krzysztofik)
Miscellaneous:
- Keep mock file open during unfaultable migrate with fill [selftests] (Krzysztof Karas)
- Test for imported buffers with drm_gem_is_imported() (Thomas Zimmermann)
- Fix corrupted copyright symbols in selftest files [guc] (Konstantin Khorenko)
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
ttm:
- fix fence signalling
Driver Changes:
amdxdna:
- provide NPU power estimate
- support sensor for column utilization
bridge:
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
ivpu:
- fixes
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
mxsfb:
- lcdif: report probing errors with dev_err_probe()
panel:
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- renesas: Clean up
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- clean up DT bindings of various drivers
panthor:
- fix fence handling
vc4:
- check return value of platform_get_irq_byname()
Imre Deak [Wed, 11 Mar 2026 15:31:52 +0000 (17:31 +0200)]
drm/i915/dp: Simplify forcing a link retraining
Since both the DP SST and MST HPD IRQ handlers call
intel_dp_handle_link_service_irq() with LINK_STATUS_CHANGED set in
irq_mask if intel_dp->link.force_retrain is set, checking for the former
flag is sufficient to determine if the link status needs to be checked
(which includes retraining the link if this is forced); remove checking
for the latter flag.
Since LINK_STATUS_CHANGED is currently set unconditionally for DP SST,
extend the related comment to note that it must be set if
intel_dp->link.force_retrain is set (in case setting LINK_STATUS_CHANGED
becomes conditional on DPCD_REV).
Imre Deak [Wed, 11 Mar 2026 15:31:51 +0000 (17:31 +0200)]
drm/i915/dp_mst: Fix forced link retrain handling in MST HPD IRQ handler
Handling of a forced link retraining debugfs request via the DP MST HPD
IRQ handler is incorrectly skipped, if the IRQ handler doesn't see any
HPD IRQs raised by the sink. Fix this by ensuring that the request is
always handled (in the Fixes: commit below by directly calling
intel_dp_check_link_state(), later by the same call moved to
intel_dp_handle_link_service_irq()).
Cc: Luca Coelho <luciano.coelho@intel.com> Fixes: db4855d90363 ("drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler") Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patch.msgid.link/20260311153152.133744-1-imre.deak@intel.com
Suraj Kandpal [Wed, 25 Feb 2026 06:50:45 +0000 (12:20 +0530)]
drm/i915/hdcp: Take force_hdcp14 into account during check_link
During intel_hdcp_check_link phase we need to take into account
if we are currently forcing HDCP 1.4 or not. This is because
we check for HDCP 2.x Link first and only if HDCP 2.x is not being
used check for HDCP 1.4. With force_hdcp14 in picture we should not
be going into intel_hdcp2_check_link because of which we may end
up trying to disable HDCP2.x even if HDCP 1.4 was enabled causing
a lot of issues while IGT tests this.
Mika Kuoppala [Wed, 4 Mar 2026 21:17:28 +0000 (23:17 +0200)]
drm/xe: Fix overflow in guc_ct_snapshot_capture
snapshot->ctb is u32*, so pointer arithmetic on it scales
the byte offset from xe_bo_size() by 4, overshooting the
intended start of the g2h portion and writing past the
allocated buffer.
Fix this by using void * to get the arithmetic right and
prevent future mishaps.
v2: s/u8/void for memcpy and iosys_map consistency (Matt)
Fixes: af3de6cf06f9 ("drm/xe: Split H2G and G2H into separate buffer objects") Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-xe@lists.freedesktop.org Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260304211728.249104-1-mika.kuoppala@linux.intel.com
Nitin Gote [Wed, 4 Mar 2026 12:38:02 +0000 (18:08 +0530)]
drm/xe: implement VM_BIND decompression in vm_bind_ioctl
Implement handling of VM_BIND(..., DECOMPRESS) in xe_vm_bind_ioctl.
Key changes:
- Parse and record per-op intent (op->map.request_decompress) when the
DECOMPRESS flag is present.
- Use xe_pat_index_get_comp_en() helper to check if a PAT index
has compression enabled via the XE2_COMP_EN bit.
- Validate DECOMPRESS preconditions in the ioctl path:
- Only valid for MAP ops.
- The provided pat_index must select the device's "no-compression" PAT.
- Only meaningful on devices with flat CCS and the required XE2+
otherwise return -EOPNOTSUPP.
- Use XE_IOCTL_DBG for uAPI sanity checks.
- Implement xe_bo_decompress():
For VRAM BOs run xe_bo_move_notify(), reserve one fence slot,
schedule xe_migrate_resolve(), and attach the returned fence
with DMA_RESV_USAGE_KERNEL. Non-VRAM cases are silent no-ops.
- Wire scheduling into vma_lock_and_validate() so VM_BIND will schedule
decompression when request_decompress is set.
- Handle fault-mode VMs by performing decompression synchronously during
the bind process, ensuring that the resolve is completed before the bind
finishes.
This schedules an in-place GPU resolve (xe_migrate_resolve) for
decompression.
v7: Rebase on latest drm-tip and add compute and igt pr info
v6: (Matt Auld)
- Rebase as xe_pat_index_get_comp_en() is added in separate
patch
- Drop vm param from xe_bo_decompress(), instead of it
extract tile from bo
- Reject decompression on igpu instead of silent skipping
to avoid any failure on Xe2+igpu as xe_device_has_flat_ccs()
can sometimes be false on igpu due some setting in the BIOS
to turn off compression on igpu.
- Nits
v5: (Matt)
- Correct the condition check of xe_pat_index_get_comp_en
v4: (Matt)
- Introduce xe_pat_index_get_comp_en(), which checks
XE2_COMP_EN for the pat_index
- .interruptible should be true, everything else false
v3: (Matt)
- s/xe_bo_schedule_decompress/xe_bo_decompress
- skip the decrompress step if the BO isn't in VRAM
- start/size not required in xe_bo_schedule_decompress
- Use xe_bo_move_notify instead of xe_vm_invalidate_vma
with respect to invalidation.
- Nits
v2:
- Move decompression work out of vm_bind ioctl. (Matt)
- Put that work in a small helper at the BO/migrate layer invoke it
from vma_lock_and_validate which already runs under drm_exec.
- Move lightweight checks to vm_bind_ioctl_check_args (Matthew Auld)
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patch.msgid.link/20260304123758.3050386-8-nitin.r.gote@intel.com
Nitin Gote [Wed, 4 Mar 2026 12:38:01 +0000 (18:08 +0530)]
drm/xe: add xe_migrate_resolve wrapper and is_vram_resolve support
Introduce an internal __xe_migrate_copy(..., is_vram_resolve) path and
expose a small wrapper xe_migrate_resolve() that calls it with
is_vram_resolve=true.
For resolve/decompression operations we must ensure the copy code uses
the compression PAT index when appropriate; this change centralizes that
behavior and allows callers to schedule a resolve (decompress) operation
via the migrate API.
v3: Fix kernel-doc warnings
v2: (Matt)
- Simplify xe_migrate_resolve(), use single BO/resource;
remove copy_only_ccs argument as it's always false.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patch.msgid.link/20260304123758.3050386-7-nitin.r.gote@intel.com
Nitin Gote [Wed, 4 Mar 2026 12:38:00 +0000 (18:08 +0530)]
drm/xe: add VM_BIND DECOMPRESS uapi flag
Add a new VM_BIND flag, DRM_XE_VM_BIND_FLAG_DECOMPRESS, that lets userspace
express intent for the driver to perform on-device in-place decompression
for the GPU mapping created by a MAP bind operation.
This flag is used by subsequent driver changes to trigger scheduling of
GPU work that resolves compressed VRAM pages into an uncompressed PAT
VM mapping.
Behavior and semantics:
- Valid only for DRM_XE_VM_BIND_OP_MAP. IOCTLs using this flag on other ops
are rejected (-EINVAL).
- The bind's pat_index must select the device "no-compression" PAT entry;
otherwise the ioctl is rejected (-EINVAL).
- Only meaningful for VRAM-backed BOs on devices that support Flat CCS and
the required hardware generation (driver will return -EOPNOTSUPP if not).
- On success the driver schedules a migrate/resolve and installs the
returned dma_fence into the BO's kernel reservation
(DMA_RESV_USAGE_KERNEL).
v3: Rebase on latest drm-tip and add compute pr info
v2: Add kernel doc (Matt)
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mrozek, Michal <michal.mrozek@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patch.msgid.link/20260304123758.3050386-6-nitin.r.gote@intel.com
accel/amdxdna: Support sensors for column utilization
The AMD PMF driver provides realtime column utilization (npu_busy)
metrics for the NPU. Extend the DRM_IOCTL_AMDXDNA_GET_INFO sensor
query to expose these metrics to userspace.
Add AMDXDNA_SENSOR_TYPE_COLUMN_UTILIZATION to the sensor type enum
and update aie2_get_sensors() to return both the total power and up
to 8 column utilization sensors if the user buffer permits.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
[lizhi: support legacy tool which uses small buffer. checkpatch cleanup] Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260311171842.473453-1-lizhi.hou@amd.com
Lizhi Hou [Sat, 28 Feb 2026 06:10:57 +0000 (00:10 -0600)]
accel/amdxdna: Add IOCTL to retrieve realtime NPU power estimate
The AMD PMF driver provides an interface to obtain realtime power
estimates for the NPU. Expose this information to userspace through a
new DRM_IOCTL_AMDXDNA_GET_INFO parameter, allowing applications to query
the current NPU power level.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
(Update comment to indicate power and utilization) Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260228061109.361239-2-superm1@kernel.org
Gustavo Sousa [Tue, 3 Mar 2026 20:46:17 +0000 (17:46 -0300)]
drm/xe/pat: Extract gt_pta_entry()
Avoid code duplication by extracting the logic for selection of the
correct PAT_PTA entry for a GT into function gt_pta_entry() and using
that function whenever necessary.
Christian König [Tue, 20 Jan 2026 12:09:52 +0000 (13:09 +0100)]
drm/amdgpu: revert to old status lock handling v4
It turned out that protecting the status of each bo_va with a
spinlock was just hiding problems instead of solving them.
Revert the whole approach, add a separate stats_lock and lockdep
assertions that the correct reservation lock is held all over the place.
This not only allows for better checks if a state transition is properly
protected by a lock, but also switching back to using list macros to
iterate over the state of lists protected by the dma_resv lock of the
root PD.
v2: re-add missing check
v3: split into two patches
v4: re-apply by fixing holding the VM lock at the right places.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Set num IP blocks to 0 if discovery fails
If discovery has failed for any reason (such as no support for a block)
then there is no need to unwind all the IP blocks in fini. In this
condition there can actually be failures during the unwind too.
Reset num_ip_blocks to zero during failure path and skip the unnecessary
cleanup path.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 9 Feb 2026 20:08:54 +0000 (04:08 +0800)]
drm/amdgpu: New interface to get IP discovery binary v3
Implement a driver path to read the IP discovery
binary offset and size from DRIVER_SCRATCH registers
BIOS signals usage by setting a feature flag that
instructs the driver to use this method. Otherwise,
fallback to legacy approach.
v2: Simplify discovery offset/size retrieval in
get_tmr_info
v3: Update get_tmr_info to cover discovery offset
and size retrieval for both bare-metal and sriov
Philip Yang [Tue, 9 Dec 2025 20:13:23 +0000 (15:13 -0500)]
drm/amdkfd: Unreserve bo if queue update failed
Error handling path should unreserve bo then return failed.
Fixes: 305cd109b761 ("drm/amdkfd: Validate user queue update") Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Alex Sierra <alex.sierra@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Fri, 27 Feb 2026 22:40:05 +0000 (17:40 -0500)]
drm/amd/display: Promote DC to 3.2.373
This version brings along the following updates:
- [FW Promotion] Release 0.1.50.0
- Sync DCN42 with DC 3.2.373
- Add DML support for dcn42
- Enable dcn42 DC clk_mgr
- Clean up unused code
- Add back missing memory type in array
- Fix compile warnings in dml2_0
- Check for S0i3 to be done before DCCG init on DCN21
- Add documentation and cleanup DMUB HW lock manager
- Add new types to replay config
- Fix HWSS v3 fast path determination
- Add missing DCCG register entries for DCN20-DCN316
- Add ESD detection for replay recovery
- Update underflow detection
- Add COLOR_ENCODING/COLOR_RANGE to overlay planes
- Add NV12/P010 formats to primary plane
- Set chroma taps to 1 if luma taps are 1
- Add min clock init for DML21 mode programming
- Return early from vesa replay enable function
- Clean up NULL pointer warnings in dml2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 5 Mar 2026 17:56:09 +0000 (12:56 -0500)]
drm/amd/display: Sync dcn42 with DC 3.2.373
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 3 Mar 2026 17:00:55 +0000 (12:00 -0500)]
drm/amd/display: Add DML support for dcn42
DML support for DCN 4.2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 20 Feb 2026 21:48:14 +0000 (16:48 -0500)]
drm/amd/display: Enable dcn42 DC clk_mgr
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clay King [Fri, 27 Feb 2026 17:34:34 +0000 (12:34 -0500)]
drm/amd/display: Clean up unused code
[WHAT]
Silence warning by cleaning up unused code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Chung [Thu, 26 Feb 2026 08:16:19 +0000 (16:16 +0800)]
drm/amd/display: Add back missing memory type in array
[WHY & HOW]
Add back some missing memory type in window_memory_type.
It should be aligned with enum dmub_window_id.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ivan Lipski [Thu, 26 Feb 2026 02:48:36 +0000 (21:48 -0500)]
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
[WHY]
On DCN21, dccg2_init() is called in dcn10_init_hw() before
bios_golden_init(). During S0i3 resume, BIOS sets MICROSECOND_TIME_BASE_DIV
to 0x00120464 as a marker. dccg2_init() overwrites this to 0x00120264,
causing dcn21_s0i3_golden_init_wa() to misdetect the state and skip golden
init.
Eventually during the resume sequence, a flip timeout occurs.
[HOW]
Skip DCCG on dccg2_is_s0i3_golden_init_wa_done() on DCN21.
Fixes: 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ChunTao Tso [Fri, 6 Feb 2026 07:41:54 +0000 (15:41 +0800)]
drm/amd/display: Add new types to replay config
[WHAT]
Add FRAME_SKIPPING_ERROR_STATUS to dpcd_replay_configuration.
Add received_frame_skipping_error_hpd to replay_config.
Add REPLAY_GENERAL_CMD_SET_COASTING_VTOTAL_WITHOUT_FRAME_UPDATE to
dmub_cmd_replay_general_subtype.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix HWSS v3 fast path determination
[WHY]
We're checking surface and stream updates after they've been applied to
their respective states within `update_planes_and_stream_state`.
Medium updates under the HWSS V3 fast path that are not supported or
tested are getting implicitly if they don't trigger a DML validation
and getting updated in place on the dc->current_state context.
[HOW]
Fix this issue by moving up the fast path determination check prior
to `update_planes_and_stream_state`. This is how the V2 path works
and how the V3 path used to work prior to the refactors in this area.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ivan Lipski [Tue, 24 Feb 2026 21:28:00 +0000 (16:28 -0500)]
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
Commit 4c595e75110e ("drm/amd/display: Migrate DCCG registers access
from hwseq to dccg component.") moved register writes from hwseq to
dccg2_*() functions but did not add the registers to the DCCG register
list macros. The struct fields default to 0, so REG_WRITE() targets
MMIO offset 0, causing a GPU hang on resume (seen on DCN21/DCN30
during IGT kms_cursor_crc@cursor-suspend).
Add
- MICROSECOND_TIME_BASE_DIV
- MILLISECOND_TIME_BASE_DIV
- DCCG_GATE_DISABLE_CNTL
- DCCG_GATE_DISABLE_CNTL2
- DC_MEM_GLOBAL_PWR_REQ_CNTL
to macros in dcn20_dccg.h, dcn301_dccg.h, dcn31_dccg.h, and dcn314_dccg.h.
Fixes: 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") Reported-by: Rafael Passos <rafael@rcpassos.me> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Weiguang Li [Mon, 8 Dec 2025 06:13:20 +0000 (14:13 +0800)]
drm/amd/display: Add ESD detection for replay recovery
[HOW]
Add Replay recovery flow so that when HPD occurs and ESD is detected,
Replay can restore the system back to normal.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Weiguang Li <wei-guang.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Mon, 23 Feb 2026 19:28:14 +0000 (14:28 -0500)]
drm/amd/display: Update underflow detection
[WHY]
Add underflow detection for later ASICs.
Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 15 Jan 2026 19:12:46 +0000 (14:12 -0500)]
drm/amd/display: Add COLOR_ENCODING/COLOR_RANGE to overlay planes
Extend COLOR_ENCODING and COLOR_RANGE property creation to overlay
planes in addition to primary planes. This allows overlay planes to
use YUV formats with proper color space configuration when the
hardware supports NV12/P010 formats.
These properties control the YUV-to-RGB conversion matrix selection
(BT.601/BT.709/BT.2020) and range handling (limited/full range).
Assisted-by: Claude: claude-sonnet-4.5 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 15 Jan 2026 19:12:05 +0000 (14:12 -0500)]
drm/amd/display: Add NV12/P010 formats to primary plane
Add NV12, NV21, and P010 YUV formats to the primary plane's supported
format list, enabling YUV content to be scanned out directly from the
primary plane.
Assisted-by: Claude: claude-sonnet-4.5 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 16 Jan 2026 14:39:05 +0000 (09:39 -0500)]
drm/amd/display: Set chroma taps to 1 if luma taps are 1
When luma is unscaled we also want chroma to be pixel-perfect.
When luma taps are > 1 the result will be a blurred luma plane,
even when the image isn't scaled.
This makes IGT tests for CSC colorop pass.
Assisted-by: Claude: claude-sonnet-4.5 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peichen Huang [Fri, 6 Feb 2026 07:10:25 +0000 (15:10 +0800)]
drm/amd/display: Return early from vesa replay enable function
[WHY & HOW]
If the enable state is already as expect then just return.
Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Clean up NULL pointer warnings in dml2
This commit addresses multiple warnings by adding defensive
checks for NULL pointers before dereferencing them. The changes ensure
that pointers such as are validated, preventing potential undefined
behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Imre Deak [Mon, 9 Mar 2026 16:48:03 +0000 (18:48 +0200)]
drm/i915/dmc: Fix an unlikely NULL pointer deference at probe
intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been
initialized, and dmc is thus NULL.
That would be the case when the call path is
intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() ->
gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as
intel_power_domains_init_hw() is called *before* intel_dmc_init().
However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count()
conditionally, depending on the current and target DC states. At probe,
the target is disabled, but if DC6 is enabled, the function is called,
and an oops follows. Apparently it's quite unlikely that DC6 is enabled
at probe, as we haven't seen this failure mode before.
It is also strange to have DC6 enabled at boot, since that would require
the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and
the driver stopping / reprogramming the firmware is a poorly specified
sequence and as such unlikely an intentional BIOS behaviour. It's more
likely that BIOS is leaving an unintentionally enabled DC6 HW state
behind (without actually loading the required DMC firmware for this).
The tracking of the DC6 allowed counter only works if starting /
stopping the counter depends on the _SW_ DC6 state vs. the current _HW_
DC6 state (since stopping the counter requires the DC5 counter captured
when the counter was started). Thus, using the HW DC6 state is incorrect
and it also leads to the above oops. Fix both issues by using the SW DC6
state for the tracking.
This is v2 of the fix originally sent by Jani, updated based on the
first Link: discussion below.
Do away with the redundant intel_frontbuffer_get(),
intel_frontbuffer_put(), and intel_frontbuffer_ref() functions, and call
the parent interface functions directly.
Jani Nikula [Mon, 2 Mar 2026 18:17:37 +0000 (20:17 +0200)]
drm/{i915, xe}/frontbuffer: move frontbuffer handling to parent interface
Move the get/put/ref/flush_for_display calls to the display parent
interface.
For i915, move the hooks next to the other i915 core frontbuffer code in
i915_gem_object_frontbuffer.c. For xe, add new file xe_frontbuffer.c for
the same.
Note: The intel_frontbuffer_flush() calls from
i915_gem_object_frontbuffer.c will partially route back to i915 core via
the parent interface. This is less than stellar.
Jani Nikula [Mon, 2 Mar 2026 18:17:35 +0000 (20:17 +0200)]
drm/i915/overlay: convert from struct intel_frontbuffer to i915_frontbuffer
The intel_frontbuffer_get() and intel_frontbuffer_put() calls are routed
through intel_frontbuffer.c to i915_gem_object_frontbuffer.c. We might
as well call the functions directly, instead of going through display
code. This would only get worse with get/put being moved to the parent
interface.
To make this easier, convert overlay code from struct intel_frontbuffer
to struct i915_frontbuffer, and add a
i915_gem_object_frontbuffer_track() wrapper for clarity.
Jani Nikula [Mon, 2 Mar 2026 18:17:34 +0000 (20:17 +0200)]
drm/i915/gem: unify i915 gem object frontbuffer function names
Many of the i915 gem object frontbuffer function names follow the file
name as prefix. Follow suit with the remaining functions, renaming them
i915_gem_object_frontbuffer_*().
Move __i915_gem_object_{flush,invalidate}_frontbuffer() to
i915_gem_object_frontbuffer.c. All the other i915 gem object frontbuffer
functions are there already, and the relevant declarations are in
i915_gem_object_frontbuffer.h too.
Linus Walleij [Tue, 10 Mar 2026 08:53:12 +0000 (09:53 +0100)]
dma-buf: heaps: Clear CMA highages using helper
Currently the CMA allocator clears highmem pages using
kmap()->clear_page()->kunmap(), but there is a helper
static inline in <linux/highmem.h> that does the same for
us so use clear_highpage() instead of open coding this.
Suggested-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260310-cma-heap-clear-pages-v2-2-ecbbed3d7e6d@kernel.org
Linus Walleij [Tue, 10 Mar 2026 08:53:11 +0000 (09:53 +0100)]
dma-buf: heaps: Clear CMA pages with clear_pages()
As of commit 62a9f5a85b98
"mm: introduce clear_pages() and clear_user_pages()" we can
clear a range of pages with a potentially assembly-optimized
call.
Instead of using a memset, use this helper to clear the whole
range of pages from the CMA allocation.
Boris Brezillon [Mon, 9 Mar 2026 12:43:18 +0000 (13:43 +0100)]
drm/panthor: Fix the "done_fence is initialized" detection logic
After commit 541c8f2468b9 ("dma-buf: detach fence ops on signal v3"),
dma_fence::ops == NULL can't be used to check if the fence is initialized.
Use dma_fence_was_initialized() instead.
v2:
- Use dma_fence_was_initialized() instead of open-coding it
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Philipp Stanner <phasta@kernel.org> Cc: Christian König <christian.koenig@amd.com> Reported-by: Steven Price <steven.price@arm.com> Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Fixes: 541c8f2468b9 ("dma-buf: detach fence ops on signal v3") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patch.msgid.link/20260309124318.222902-1-boris.brezillon@collabora.com
Amin GATTOUT [Sun, 8 Mar 2026 10:15:57 +0000 (11:15 +0100)]
drm/loongson: use drm_gem_ttm_dumb_map_offset()
Replace the open-coded lsdc_dumb_map_offset() with the generic
drm_gem_ttm_dumb_map_offset() helper, which is functionally identical.
This removes unnecessary boilerplate and aligns with the DRM convention
for TTM-based drivers.
drm/gem-shmem: Track folio accessed/dirty status in vmap
On successful vmap, set the page_mark_accessed_on_put and _dirty_on_put
flags in the gem-shmem object. Signals that the contained pages require
LRU and dirty tracking when they are being released back to SHMEM. Clear
these flags on put, so that the buffer remains quiet until the next call
to vmap. There's no means of handling dirty status in vmap as there's no
write-only mapping available.
Both flags, _accessed_on_put and _dirty_on_put, have always been part of
the gem-shmem object, but never used much. So most drivers did not track
the page status correctly.
Only the v3d and imagination drivers make limited use of _dirty_on_put. In
the case of imagination, move the flag setting from init to cleanup. This
ensures writeback of modified pages but does not interfere with the
internal vmap/vunmap calls. V3d already implements this behaviour.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # gem-shmem Acked-by: Frank Binns <frank.binns@imgtec.com> # imagination Tested-by: Frank Binns <frank.binns@imgtec.com> # imagination Link: https://patch.msgid.link/20260227114509.165572-7-tzimmermann@suse.de
drm/gem-shmem: Track folio accessed/dirty status in mmap
Invoke folio_mark_accessed() in mmap page faults to add the folio to
the memory manager's LRU list. Userspace invokes mmap to get the memory
for software rendering. Compositors do the same when creating the final
on-screen image, so keeping the pages in LRU makes sense. Avoids paging
out graphics buffers when under memory pressure.
In pfn_mkwrite, further invoke the folio_mark_dirty() to add the folio
for writeback should the underlying file be paged out from system memory.
This rarely happens in practice, yet it would corrupt the buffer content.
This has little effect on a system's hardware-accelerated rendering, which
only mmaps for an initial setup of textures, meshes, shaders, etc.
v4:
- test for VM_FAULT_NOPAGE before marking folio as accessed (Boris)
- test page-array bounds in mkwrite handler (Boris)
v3:
- rewrite for VM_PFNMAP
v2:
- adapt to changes in drm_gem_shmem_try_mmap_pmd()
The current mmap page-fault handler requires some changes before it
can track folio access.
Call to folio_test_pmd_mappable() into the mmap page-fault handler
before calling drm_gem_shmem_try_map_pmd(). The folio will become
useful for tracking the access status.
Also rename drm_gem_shmem_try_map_pmd() to _try_insert_pfn_pmd()
and only pass the page fault and page-frame number. The new name and
parameters make it similar to vmf_insert_pfn_pmd().
No functional changes. If PMD mapping fails or is not supported,
insert a regular PFN as before.
drm/gem-shmem: Return vm_fault_t from drm_gem_shmem_try_map_pmd()
Return the exact VM_FAULT_ mask from drm_gem_shmem_try_map_pmd(). Gives
the caller better insight into the result. Return 0 if nothing was done.
If the caller sees VM_FAULT_NOPAGE, drm_gem_shmem_try_map_pmd() added a
PMD entry to the page table. As before, return early from the page-fault
handler in that case.
drm/gem-shmem: Test for existence of page in mmap fault handler
Not having a page pointer in the mmap fault handler is an error. Test
for this situation and return VM_FAULT_SIGBUS if so. Also replace several
lookups of the page with a local variable.
drm/xe/userptr: Defer Waiting for TLB invalidation to the second pass if possible
Now that the two-pass notifier flow uses xe_vma_userptr_do_inval() for
the fence-wait + TLB-invalidate work, extend it to support a further
deferred TLB wait:
- xe_vma_userptr_do_inval(): when the embedded finish handle is free,
submit the TLB invalidation asynchronously (xe_vm_invalidate_vma_submit)
and return &userptr->finish so the mmu_notifier core schedules a third
pass. When the handle is occupied by a concurrent invalidation, fall
back to the synchronous xe_vm_invalidate_vma() path.
- xe_vma_userptr_complete_tlb_inval(): new helper called from
invalidate_finish when tlb_inval_submitted is set. Waits for the
previously submitted batch and unmaps the gpusvm pages.
xe_vma_userptr_invalidate_finish() dispatches between the two helpers
via tlb_inval_submitted, making the three possible flows explicit:
In multi-GPU scenarios this allows TLB flushes to be submitted on all
GPUs in one pass before any of them are waited on.
Also adds xe_vm_invalidate_vma_submit() which submits the TLB range
invalidation without blocking, populating a xe_tlb_inval_batch that
the caller waits on separately.
v3:
- Add locking asserts and notifier state asserts (Matt Brost)
- Update the locking documentation of the notifier
state members (Matt Brost)
- Remove unrelated code formatting changes (Matt Brost)
drm/xe: Split TLB invalidation into submit and wait steps
xe_vm_range_tilemask_tlb_inval() submits TLB invalidation requests to
all GTs in a tile mask and then immediately waits for them to complete
before returning. This is fine for the existing callers, but a
subsequent patch will need to defer the wait in order to overlap TLB
invalidations across multiple VMAs.
Introduce xe_tlb_inval_range_tilemask_submit() and
xe_tlb_inval_batch_wait() in xe_tlb_inval.c as the submit and wait
halves respectively. The batch of fences is carried in the new
xe_tlb_inval_batch structure. Remove xe_vm_range_tilemask_tlb_inval()
and convert all three call sites to the new API.
v3:
- Don't wait on TLB invalidation batches if the corresponding batch
submit returns an error. (Matt Brost)
- s/_batch/batch/ (Matt Brost)
drm/xe/userptr: Convert invalidation to two-pass MMU notifier
In multi-GPU scenarios, asynchronous GPU job latency is a bottleneck if
each notifier waits for its own GPU before returning. The two-pass
mmu_interval_notifier infrastructure allows deferring the wait to a
second pass, so all GPUs can be signalled in the first pass before
any of them are waited on.
Convert the userptr invalidation to use the two-pass model:
Use invalidate_start as the first pass to mark the VMA for repin and
enable software signalling on the VM reservation fences to start any
gpu work needed for signaling. Fall back to completing the work
synchronously if all fences are already signalled, or if a concurrent
invalidation is already using the embedded finish structure.
Use invalidate_finish as the second pass to wait for the reservation
fences to complete, invalidate the GPU TLB in fault mode, and unmap
the gpusvm pages.
Embed a struct mmu_interval_notifier_finish in struct xe_userptr to
avoid dynamic allocation in the notifier callback. Use a finish_inuse
flag to prevent two concurrent invalidations from using it
simultaneously; fall back to the synchronous path for the second caller.
v3:
- Add locking asserts in notifier components (Matt Brost)
- Clean up newlines (Matt Brost)
- Update the userptr notifier state member locking documentation
(Matt Brost)
GPU use-cases for mmu_interval_notifiers with hmm often involve
starting a gpu operation and then waiting for it to complete.
These operations are typically context preemption or TLB flushing.
With single-pass notifiers per GPU this doesn't scale in
multi-gpu scenarios. In those scenarios we'd want to first start
preemption- or TLB flushing on all GPUs and as a second pass wait
for them to complete.
One can do this on per-driver basis multiplexing per-driver
notifiers but that would mean sharing the notifier "user" lock
across all GPUs and that doesn't scale well either, so adding support
for multi-pass in the core appears to be the right choice.
Implement two-pass capability in the mmu_interval_notifier. Use a
linked list for the final passes to minimize the impact for
use-cases that don't need the multi-pass functionality by avoiding
a second interval tree walk, and to be able to easily pass data
between the two passes.
v1:
- Restrict to two passes (Jason Gunthorpe)
- Improve on documentation (Jason Gunthorpe)
- Improve on function naming (Alistair Popple)
v2:
- Include the invalidate_finish() callback in the
struct mmu_interval_notifier_ops.
- Update documentation (GitHub Copilot:claude-sonnet-4.6)
- Use lockless list for list management.
v3:
- Update kerneldoc for the struct mmu_interval_notifier_finish::list member
(Matthew Brost)
- Add a WARN_ON_ONCE() checking for NULL invalidate_finish() op if
if invalidate_start() is non-NULL. (Matthew Brost)
v4:
- Addressed documentation review comments by David Hildenbrand.
Cc: Matthew Brost <matthew.brost@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: David Hildenbrand <david@kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Vlastimil Babka <vbabka@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Simona Vetter <simona.vetter@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: <dri-devel@lists.freedesktop.org> Cc: <linux-mm@kvack.org> Cc: <linux-kernel@vger.kernel.org> Assisted-by: GitHub Copilot:claude-sonnet-4.6 # Documentation only. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: David Hildenbrand (Arm) <david@kernel.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/20260305093909.43623-2-thomas.hellstrom@linux.intel.com
Lukas Bulwahn [Wed, 11 Mar 2026 04:33:14 +0000 (05:33 +0100)]
MAINTAINERS: adjust file entry in GPU BUDDY ALLOCATOR
The commit 4a9671a03f2b ("gpu: Move DRM buddy allocator one level up (part
one)") and commit ba110db8e1bc ("gpu: Move DRM buddy allocator one level up
(part two)") split the majority of the file drivers/gpu/drm/drm_buddy.c
into drivers/gpu/buddy.c, with some pieces remaining in the original
location drivers/gpu/drm/drm_buddy.c.
The commits also adjust the file entries in the GPU BUDDY ALLOCATOR
section, but as part of that, change the file entry to the non-existing
file drivers/gpu/drm_buddy.c instead of keeping the reference to the
existing file drivers/gpu/drm/drm_buddy.c.
Make the file entry in GPU BUDDY ALLOCATOR refer to the intended existing
file. While at it, order the file entries in this section alphabetically.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Link: https://patch.msgid.link/20260311043314.265627-1-lukas.bulwahn@redhat.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Dmitry Baryshkov [Wed, 11 Feb 2026 09:17:27 +0000 (11:17 +0200)]
drm: bridge: anx7625: correctly detect if PD can be disabled
During initial checks the ANX7625 bridge can be powered on before
setting up the Type-C port. At this point, when
anx7625_ocm_loading_check() checks if it can disable PD or not, it will
notice that typec_port is not set and disable PD, breaking orientation
and HPD handling. Unify the check between anx7625_ocm_loading_check()
anx7625_i2c_probe() and anx7625_typec_register() and check for the
presence of the "connector" node.
Loic Poulain [Sun, 15 Feb 2026 01:30:02 +0000 (03:30 +0200)]
drm: bridge: anx7625: don't crash if Type-C port is not used
The typec_set_*() functions do not tolerate being passed the NULL
typec_port instance. However, if CONFIG_TYPEC is enabled, but anx7625
DT node doesn't have the usb-c connector fwnode, then typec_port remains
NULL, crashing the kernel. Prevent calling typec_set_foo() functions by
checking that ctx->typec_port is not NULL in anx7625_typec_set_status().
When CONFIG_TYPEC is enabled, but USB_ROLE_SWITCH=m, the anx7625 driver
fails to link as built-in:
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/anx7625.o: in function `anx7625_i2c_remove':
anx7625.c:(.text+0x6ec): undefined reference to `usb_role_switch_put'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/anx7625.o: in function `anx7625_typec_set_status':
anx7625.c:(.text+0x3080): undefined reference to `usb_role_switch_set_role'
aarch64-linux-ld: drivers/gpu/drm/bridge/analogix/anx7625.o: in function `anx7625_i2c_probe':
anx7625.c:(.text+0x5368): undefined reference to `fwnode_usb_role_switch_get'
The problem is that both dependencies are optional in the sense of allowing
the anx7625 driver to call the exported interfaces to be used from a loadable
module, but cannot work for built-in drivers. It would be possible to handle
all nine combinations of the CONFIG_TYPEC and CONFIG_USB_ROLE_SWITCH tristate
options, but that does add a lot of complexity that seems unnecessary when
in reality any user of this driver would have both enabled anyway.
Turn both dependencies into hard 'depends on' here to only allow configurations
where it's possible to actually use them, and remove the misguided IS_REACHABLE()
check that did nothing here.
Gustavo Sousa [Tue, 10 Mar 2026 00:42:12 +0000 (21:42 -0300)]
drm/xe: Translate C-state "reset value" into RC6
There are higher level sleep states that will cause RC6 state readout to
come back with an "in-reset" value. That is the case with NVL-P. As
those states are only possible if the GT is already in C6, let's just
translate the "reset value" into C6 when doing the readout.
Gustavo Sousa [Tue, 10 Mar 2026 00:42:11 +0000 (21:42 -0300)]
drm/xe/xe3p: Drop Wa_16028780921
Wa_16028780921 involves writing to a register that is locked by firmware
prior to driver loading and doesn't have any effect if implemented by
the KMD. Since the implementation of the workaround actually belongs
the firmware, just drop the ineffective implementation by the KMD.
Gustavo Sousa [Tue, 10 Mar 2026 00:42:10 +0000 (21:42 -0300)]
drm/xe/nvlp: Implement Wa_14026539277
Implement the KMD part of Wa_14026539277, which applies to NVL-P A0.
The KMD implementation is just one component of the workaround, which
also depends on Pcode to implement its part in order to be complete.
v2:
- Add FUNC(xe_rtp_match_not_sriov_vf) to skip applying the workaround
to SRIOV VFs. (Matt)
v3:
- Make Wa_14026539277 a device workaround instead of a GT workaround.
(Matt)
v4:
- Drop FUNC(xe_rtp_match_not_sriov_vf) and use a direct check with
IS_SRIOV_VF() in the workaround implementation. (Matt)
Gustavo Sousa [Tue, 10 Mar 2026 00:42:09 +0000 (21:42 -0300)]
drm/xe/rtp: Add support for matching platform-level stepping
Add support for matching platform-level stepping, which will be used for
an upcoming NVL-P workaround.
As support for reading platform-level stepping information is added only
as needed in the driver, add a warning when the rule finds a STEP_NONE
value, which is an indication that the driver is missing such a support.
projects / thirdparty / kernel / linux.git / log
