Eric Dumazet [Tue, 19 May 2026 19:32:48 +0000 (19:32 +0000)]
ipv4: use WARN_ON_ONCE() in ip_rt_bug()
It turns out ip_rt_bug() can be called more than expected.
syzbot will still panic (because of panic_on_warn=1), but non debug
kernels will no longer die while repeating stack traces on the console.
Fixes: c378a9c019cf ("ipv4: Give backtrace in ip_rt_bug().") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260519193248.4018872-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change __icmp_send() to not send ICMP to broadcast/multicast destinations.
Fixes: c378a9c019cf ("ipv4: Give backtrace in ip_rt_bug().") Reported-by: syzbot+c13a57c2639c2c0d03a6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a0cc169.170a0220.1f6c2d.0004.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260519200836.4141061-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Carlier [Tue, 19 May 2026 20:35:30 +0000 (21:35 +0100)]
net: devmem: reject dma-buf bind with non-page-aligned size or SG length
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions.
Fixes: bd61848900bf ("net: devmem: Implement TX path") Cc: stable@vger.kernel.org Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20260519203530.66310-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 21 May 2026 00:26:55 +0000 (17:26 -0700)]
Merge tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
- L2CAP: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
- ISO: drop ISO_END frames received without prior ISO_START
- MGMT: validate Add Extended Advertising Data length
- bnep: Fix UAF read of dev->name
- btmtk: fix urb->setup_packet leak in error paths
- btintel_pcie: Fix incorrect MAC access programming
- hci_uart: fix UAFs and race conditions in close and init paths
* tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Bluetooth: MGMT: validate Add Extended Advertising Data length
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
Bluetooth: btintel_pcie: Fix incorrect MAC access programming
Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
Bluetooth: bnep: Fix UAF read of dev->name
====================
====================
bpf, skmsg: fix verdict sk_data_ready racing with ktls rx
sk_psock_verdict_data_ready() lacks the tls_sw_has_ctx_rx() guard that
sk_psock_strp_data_ready() gained in e91de6afa81c. When a socket is
inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured,
the missing guard causes tcp_read_skb() to drain sk_receive_queue without
advancing copied_seq, leaving a dangling frag_list pointer that
tls_decrypt_sg() walks — a use-after-free.
Patch 1 mirrors the fix from e91de6afa81c: add the tls_sw_has_ctx_rx()
check to sk_psock_verdict_data_ready() so that when a TLS RX context is
present the function defers to psock->saved_data_ready (sock_def_readable)
instead of calling tcp_read_skb().
Patch 2 adds a selftest that drives the vulnerable sequence end-to-end
and verifies recv() returns the correct decrypted data.
====================
Xingwang Xiang [Sun, 17 May 2026 14:56:27 +0000 (23:56 +0900)]
selftests/bpf: add regression test for ktls+sockmap verdict UAF
Test the scenario where a socket is inserted into a sockmap with a
BPF_SK_SKB_VERDICT program before TLS RX is configured. Previously
sk_psock_verdict_data_ready() would call tcp_read_skb() and drain the
receive queue without advancing copied_seq, causing tls_decrypt_sg()
to walk a dangling frag_list pointer (use-after-free).
The test drives the full vulnerable sequence and verifies that after
the fix recv() returns the correct decrypted data.
Xingwang Xiang [Sun, 17 May 2026 14:56:26 +0000 (23:56 +0900)]
bpf, skmsg: fix verdict sk_data_ready racing with ktls rx
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg().
====================
rxrpc: Better fix for DATA/RESPONSE decrypt vs splice()
Here are two patches containing better fixes for the in-place decryption of
DATA and RESPONSE packets that can corrupt pagecache spliced into UDP
packets and sent to an AF_RXRPC server [CVE-2026-43500], plus a patch to
precheck the length of rxgk-secured DATA packets.
Of the main patches, one patch fixes DATA decryption by having recvmsg
unconditionally extract the data into a flat bounce buffer and, if need be,
decrypt it there. It doesn't seem to cause a performance problem to do
this even on unencrypted packets; for encrypted packets it makes sure the
content is correctly aligned for crypto which seems to get a small
performance gain.
Further, it means that DATA packets are no longer copied in the I/O thread,
avoiding a slowdown of the protocol engine that runs there.
The other main patch fixes RESPONSE decryption by having the connection
event handler worker copy the data to a flat buffer and, again, decrypt it
there. This simplifies RESPONSE handling.
With these two fixes, the data content of the received sk_buff no longer
gets altered.
====================
David Howells [Fri, 15 May 2026 23:05:15 +0000 (00:05 +0100)]
rxrpc: Fix RESPONSE packet verification to extract skb to a linear buffer
This improves the fix for CVE-2026-43500.
Fix the verification of RESPONSE packets to avoid the problem of
overwriting a RESPONSE packet sent via splice to a local address by
extracting the contents of the UDP packet into a kmalloc'd linear buffer
rather than decrypting the data in place in the sk_buff (which may corrupt
the original buffer).
Fixes: 24481a7f5733 ("rxrpc: Fix conn-level packet handling to unshare RESPONSE packets") Reported-by: Hyunwoo Kim <imv4bel@gmail.com> Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/ Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> Link: https://patch.msgid.link/20260515230516.2718212-4-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Fri, 15 May 2026 23:05:14 +0000 (00:05 +0100)]
rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff.
Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Reported-by: Hyunwoo Kim <imv4bel@gmail.com> Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/ Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> Link: https://patch.msgid.link/20260515230516.2718212-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 15 May 2026 22:13:25 +0000 (15:13 -0700)]
net: shaper: rework the VALID marking (again)
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner.
Reported-by: Sashiko <sashiko-bot@kernel.org> Fixes: 93954b40f6a4 ("net-shapers: implement NL set and delete operations") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260515221325.1685455-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 15 May 2026 22:13:24 +0000 (15:13 -0700)]
net: shaper: annotate the data races
As previously discussed we don't care about making the shaper
state fully RCU-compliant because the hierarchy itself can't
be dumped in one go over Netlink. Let's annotate the reads
and writes to make that clear.
The field-by-field assignments will also be useful for the
next commit which adds explicit "valid" field (which we don't
want to override with the current full struct assignment).
net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock.
Fixes: 22239eb258bc ("net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed") Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260510225903.13184-1-prathameshdeshpande7@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
udp: gso: Fix __udp_gso_segment() after GSO_PARTIAL UDP length change
This series fixes two issues introduced by commit b10b446ce7ad ("udp:
gso: Use single MSS length in UDP header for GSO_PARTIAL"), which
switched __udp_gso_segment() to write the single MSS length into the UDP
header for GSO_PARTIAL skbs.
Patch 1 (from Alice) fixes the UDP checksum adjustment in
__udp_gso_segment().
The patch adjusts the checksum by the correct delta, and since msslen
and newlen become equivalent before the loop, drops one of the two
variables to simplify the code.
Patch 2 handles the case where the last segment of a GSO_PARTIAL skb is
itself a GSO skb. This happens when the original packet size is an exact
multiple of MSS, so the post-loop segment is not a remainder skb but a
full GSO chunk and must also carry the single MSS length in its UDP
header.
====================
Gal Pressman [Mon, 18 May 2026 06:22:50 +0000 (09:22 +0300)]
udp: Fix UDP length on last GSO_PARTIAL segment
Following the cited commit, __udp_gso_segment() writes single MSS length
in the UDP header.
The cited patch doesn't account for the fact that the last segment could
be a GSO skb by itself. This could happen when the size of the packet is
a multiple of MSS, hence the first segment is also the last one (there
is no need for a remainder skb).
When the post-loop segment is a GSO skb, assign the single MSS length in
the UDP header.
Fixes: b10b446ce7ad ("udp: gso: Use single MSS length in UDP header for GSO_PARTIAL") Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev> Closes: https://lore.kernel.org/all/6c3fb15e-711d-4b8d-b152-e03d9b05293f@linux.dev/ Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260518062250.3019914-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp: gso: Fix handling checksum in __udp_gso_segment
The cited commit started using msslen for uh->len, but still uses newlen
to adjust uh->check. Although the checksum is ignored in most cases due
to the hardware offload, __udp_gso_segment attempts to maintain the
correct one. Fix uh->check and adjust it by the right value.
Additionally, after the fix, newlen becomes assigned and unused before
the loop. The code can be simplified a bit if mss adjustment is dropped,
so that newlen becomes equal to msslen before the loop, and msslen can
be also dropped, saving a few lines of code.
This brings us back to one variable, drops an unneeded arithmetic for
mss, and fixes the UDP checksum.
Fixes: b10b446ce7ad ("udp: gso: Use single MSS length in UDP header for GSO_PARTIAL") Signed-off-by: Alice Mikityanska <alice@isovalent.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260518062250.3019914-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Safa Karakuş [Sat, 16 May 2026 18:15:04 +0000 (21:15 +0300)]
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
bt_accept_dequeue() unlinks a not-yet-accepted child from the parent
accept queue and release_sock()s it before returning, so the returned
sk has no caller reference and is unlocked.
l2cap_sock_cleanup_listen() walks these children on listening-socket
close. A concurrent HCI disconnect drives hci_rx_work ->
l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and
frees the child sk and its l2cap_chan; cleanup_listen() then uses both:
This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the
accept_q list/poll and takes temporary refs inside bt_accept_dequeue(),
and CVE-2025-39860 serialises the userspace close()/accept() race by
calling cleanup_listen() under lock_sock() in l2cap_sock_release().
Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF
still reproduces on current bluetooth/master.
Take the reference at the source: bt_accept_dequeue() does sock_hold()
while sk is still locked, before release_sock(); callers sock_put().
cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under
a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops
it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on
SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under
the parent sk lock and that would invert
conn->lock -> chan->lock -> sk_lock (lockdep).
KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced
12 use-after-free reports per run before this change; 0, and no lockdep
report, over 1600+ raced iterations after it on bluetooth/master.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang <oss@fourdim.xyz> Reviewed-by: Siwei Zhang <oss@fourdim.xyz> Signed-off-by: Safa Karakuş <safa.karakus@secunnix.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mingyu Wang [Mon, 18 May 2026 02:49:49 +0000 (10:49 +0800)]
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities.
Fixes: 3b799254cf6f ("Bluetooth: hci_uart: Cancel init work before unregistering") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.
Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jiajia Liu [Mon, 18 May 2026 02:24:02 +0000 (10:24 +0800)]
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths.
Fixes: a1c49c434e150 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
David Carlier [Fri, 15 May 2026 06:25:25 +0000 (07:25 +0100)]
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
ISO data PDUs carry a packet-boundary flag indicating START, CONT, END
or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing
ISO_START by checking conn->rx_len before touching conn->rx_skb, but
ISO_END does not.
If a peer sends an ISO_END as the first packet on a fresh ISO
connection, conn->rx_skb is still NULL and conn->rx_len is zero, so
skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,
where receivers sync to a broadcaster without pairing, any broadcaster
on the air can trigger this.
Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment
is logged and dropped instead of crashing the host.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier <devnexen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Kiran K [Thu, 14 May 2026 19:02:48 +0000 (00:32 +0530)]
Bluetooth: btintel_pcie: Fix incorrect MAC access programming
btintel_pcie_get_mac_access() and btintel_pcie_release_mac_access()
were programming STOP_MAC_ACCESS_DIS and XTAL_CLK_REQ in addition to
the MAC_ACCESS_REQ handshake. These bits are not part of the host
MAC-access handshake on the supported parts; the driver was
programming them incorrectly. Drop the writes so the register update
contains only the bits the controller actually consumes.
Fixes: b9465e6670a2 ("Bluetooth: btintel_pcie: Read hardware exception data") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
This fixes not setting the bit for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
when extended features bit is set otherwise the controller may not
generate HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE causing
hci_le_read_all_remote_features_sync to timeout waiting for it.
Also remove dead code.
Fixes: a106e50be74b ("Bluetooth: HCI: Add support for LL Extended Feature Set") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jann Horn [Tue, 12 May 2026 20:15:39 +0000 (22:15 +0200)]
Bluetooth: bnep: Fix UAF read of dev->name
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)
Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Nikhil P. Rao [Fri, 15 May 2026 21:29:07 +0000 (21:29 +0000)]
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash.
Nikhil P. Rao [Fri, 15 May 2026 21:29:05 +0000 (21:29 +0000)]
pds_core: fix error handling in pdsc_devcmd_wait
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery.
In an internal review from Airoha, it was notice that the RX DMA descriptor
bits and mask are wrong. These values probably refer to an old NPU firmware
never published. The previous value works correctly but it was reported
that in some specific condition in mixed scenario with both Ethernet and
WiFi offload it's possible that RX DMA descriptor signal wrong value with
the problem to the RX ring or packets getting dropped.
To handle these specific scenario, apply the new suggested bits mask from
Airoha.
Correct functionality of both AN7581 NPU and MT7996 variant were verified
and confirmed working.
Fixes: a7fc8c641cab ("net: airoha: Fix npu rx DMA definitions") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260518134530.3683-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jann Horn [Mon, 18 May 2026 16:51:30 +0000 (18:51 +0200)]
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71bea ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c62486e ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5.
Justin Iurman [Sun, 17 May 2026 18:30:59 +0000 (20:30 +0200)]
ipv6: ioam: add NULL check for idev in ipv6_hop_ioam()
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman <justin.iurman@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: phy: honor eee_disabled_modes when advertising EEE
While debugging why ethtool --show-eee reports "not supported" on a
Raspberry Pi CM4 with eee-broken-1000t / eee-broken-100tx set on the
PHY node, I noticed two phylib helpers copy phydev->supported_eee
into phydev->advertising_eee without applying
phydev->eee_disabled_modes: phy_support_eee() and
phy_advertise_eee_all(). That undoes the filtering phy_probe() set
up after of_set_phy_eee_broken(), so the PHY ends up advertising EEE
for modes that were marked broken in DT (or by the driver via
eee_disabled_modes).
The visible effect on MAC drivers that call phy_support_eee() after
probe (bcmgenet, fec, lan743x, lan78xx, r8169) is that ethtool on the
local interface reports "not supported" (because supported is masked
by eee_disabled_modes and ends up empty), while the link partner
happily sees EEE negotiated and active.
Patch 1 fixes phy_support_eee(). Patch 2 fixes phy_advertise_eee_all(),
which is also reached from genphy_c45_ethtool_set_eee() when user
space passes an empty advertisement.
I went through the other users of supported_eee as suggested by Andrew
and they look fine:
- phy_probe() already masks via eee_disabled_modes after
of_set_phy_eee_broken().
- genphy_c45_ethtool_get_eee() masks supported_eee with
eee_disabled_modes when reporting to user space.
- genphy_c45_ethtool_set_eee() masks user-supplied adv against
eee_disabled_modes, and the empty-adv path is now covered by
patch 2.
- genphy_c45_read_eee_abilities(), read_eee_cap1/cap2 populate
supported_eee from PHY registers (source of truth).
- genphy_c45_read_eee_adv(), read_eee_lpa() and write_eee_adv() use
supported_eee only to gate which MMD registers to access, not to
construct an advertisement.
====================
Nicolai Buchwitz [Mon, 18 May 2026 08:23:10 +0000 (10:23 +0200)]
net: phy: honor eee_disabled_modes in phy_advertise_eee_all()
phy_advertise_eee_all() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. genphy_c45_ethtool_set_eee() calls this helper
when user space passes an empty advertisement, undoing the filtering.
Apply the same eee_disabled_modes mask in phy_advertise_eee_all() so
the filtering survives the copy, matching the pattern in phy_probe()
and phy_support_eee().
Nicolai Buchwitz [Mon, 18 May 2026 08:23:09 +0000 (10:23 +0200)]
net: phy: honor eee_disabled_modes in phy_support_eee()
phy_support_eee() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. MAC drivers that call phy_support_eee() after
probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY
to advertise EEE for modes the user marked as broken.
The symptom is that ethtool --show-eee on the local interface reports
"not supported" (supported & ~eee_disabled_modes is empty) while the
link partner sees EEE negotiated and active.
phy_probe() already filters advertising_eee via eee_disabled_modes
after calling of_set_phy_eee_broken(). Apply the same mask in
phy_support_eee() so the filtering survives the copy.
net: phy: skip EEE advertisement write when autoneg is disabled
genphy_c45_an_config_eee_aneg() writes the EEE advertisement to the
auto-negotiation device's MMD register space (MDIO_MMD_AN, register
MDIO_AN_EEE_ADV). These registers are read by the link partner only
during auto-negotiation, so writing them while autoneg is disabled
cannot influence the link. On some PHYs (e.g. Broadcom BCM54213PE)
the write nevertheless reaches the chip and disturbs the receive
datapath.
Concretely, running
ethtool -s eth0 speed 100 duplex full autoneg off
ethtool --set-eee eth0 eee off
leaves eth0 with TX working and RX completely silent on a
Raspberry Pi 4 / CM4 board (bcmgenet + BCM54213PE in rgmii-rxid).
Switching back to autoneg recovers the link.
Prior to commit f26a29a038ee ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled"),
the disable path was effectively a no-op because the helper read
the stale eee_cfg.eee_enabled, so the underlying PHY behavior never
surfaced.
====================
bridge: mcast: Fix a possible use-after-free when removing a bridge port
Patch #1 fixes a possible use-after-free when removing a bridge port.
Patch #2 adds a test case that triggers the problem.
In net-next we can:
1. Add DEBUG_NET_WARN_ON_ONCE() when a port multicast context is
de-initialized while enabled.
2. When de-initializing a port multicast context, synchronously shutdown
all the timers that were initialized when the context was initialized.
====================
Ido Schimmel [Sun, 17 May 2026 12:11:22 +0000 (15:11 +0300)]
selftests: bridge_vlan_mcast: Test toggling of multicast snooping
Test toggling of multicast snooping when per-VLAN multicast snooping is
enabled. The test always passes, but without "bridge: mcast: Fix
possible use-after-free when removing a bridge port" it results in a
splat.
Ido Schimmel [Sun, 17 May 2026 12:11:21 +0000 (15:11 +0300)]
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
Dawei Feng [Fri, 15 May 2026 15:18:26 +0000 (23:18 +0800)]
octeontx2-pf: avoid double free of pool->stack on AQ init failure
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware.
Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues") Fixes: d322fbd17203 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonas Jelonek [Fri, 15 May 2026 14:31:03 +0000 (14:31 +0000)]
net: pse-pd: fix sign on -ENOENT check in of_load_pse_pis()
of_count_phandle_with_args() returns the count on success and a negative
errno on failure, including -ENOENT when the "pairsets" property is
absent. The existing comparison in of_load_pse_pis() checks against
ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any
error return: legitimate DTs that omit "pairsets" trigger a spurious
"wrong number of pairsets" error and probe fails with -EINVAL.
Compare against -ENOENT so a missing "pairsets" property is correctly
treated as "this PI has no pairsets, continue".
Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs") Cc: stable@vger.kernel.org Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 19 May 2026 13:36:38 +0000 (15:36 +0200)]
Merge branch 'mptcp-misc-fixes-for-v7-1-rc4'
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc4
Here are various unrelated fixes:
- Patch 1: avoid dropping partial packets. A previous version has been
sent a few week ago. A fix for 5.10.
- Patches 2-3: stop ADD_ADDR timer when an ADD_ADDR can never been sent
due to insufficient option space. A fix for v5.10.
- Patch 4: reset rcv_wnd_sent on disconnect, just in case the next
connection falls back to TCP. A fix for 5.17.
- Patch 5: update window_clamp when SO_RCVBUF is set during the
connection. A fix similar to a recent one on TCP side, for v6.6.
- Patch 6: avoid wrong time being displayed in the selftests when using
uutils 0.8.0 which contains a regression with 'date +%3N'. It doesn't
fix an issue in the kernel selftests, but having the fix is helpful
for those using uutils 0.8.0.
selftests: mptcp: drop nanoseconds width specifier
Using the format specifier +%s%3N with GNU date is honoured, and only
prints 3 digits of the nanoseconds portion of the seconds since epoch,
which corresponds to the milliseconds.
The uutils implementation of date currently does not honour this, and
always prints all 9 digits. This is a known issue [1], but can be worked
around by adapting this test to use nanoseconds instead of microseconds,
and then divide it by 1e6.
This fix is similar to what has been done on systemd side [2], and it is
needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0.
Note that the Fixes tag is there even if this patch doesn't fix an issue
in the kernel selftests, but it is useful for those using uutils 0.8.0.
Gang Yan [Fri, 15 May 2026 04:27:36 +0000 (06:27 +0200)]
mptcp: update window_clamp on subflows when SO_RCVBUF is set
Add __mptcp_subflow_set_rcvbuf() helper to write the subflow sk_rcvbuf,
but also to call the recently added tcp_set_rcvbuf() helper to update
window_clamp. This is needed because the window clap is updated when
scaling_ratio changes, in tcp_measure_rcv_mss(). Until scaling_ratio
changes, the subflow is stuck with the old window clamp which may be
based on a small initial buffer.
Use this new helper in both mptcp_sol_socket_sync_intval() (setsockopt
path) and sync_socket_options() (new subflow creation path).
Note that this patch depends on commit b025461303d8 ("tcp: update
window_clamp when SO_RCVBUF is set"): it fixes the issue on TCP side,
but the same fix is needed on MPTCP side as well.
Paolo Abeni [Fri, 15 May 2026 04:27:35 +0000 (06:27 +0200)]
mptcp: reset rcv wnd on disconnect
If the MPTCP socket fallback to TCP before the MP handshake completion,
the IASN remain 0, and the rcv_wnd_sent field is not explicitly
initialized, just incremented over time with the data transfer.
At disconnect time such value is not cleared. If the next connection falls
back to TCP before the MP handshake completion, the data transfer will
keep incrementing the receive window end sequence starting from the last
value used in the previous connection: the announced window will be
unrelated from the actual receiver buffer size and likely too big.
Address the issue zeroing the field at disconnect time.
Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-4-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Li Xiasong [Fri, 15 May 2026 04:27:33 +0000 (06:27 +0200)]
mptcp: pm: fix ADD_ADDR timer infinite retry on option space insufficient
When TCP option space is insufficient (e.g., when sending ADD_ADDR with an
IPv6 address and port while tcp_timestamps is enabled), the original code
jumped to out_unlock without clearing the addr_signal flag. This caused
mptcp_pm_add_timer to keep rescheduling indefinitely, not sending ADD_ADDR,
preventing subsequent addresses in the endpoint list from being announced.
Handle this case by clearing the ADD_ADDR signal and skipping the matching
ADD_ADDR retransmission entry. The skip path cancels the matching timer
(with id check) and advances PM state progression, preserving forward
progress to subsequent PM work.
This cancellation is inherently best-effort. A concurrent add_timer
callback may already be running and may acquire pm.lock before the
cancel path updates entry state. In that case, one final ADD_ADDR
transmit attempt can still be executed.
Once the cancel path sets entry->retrans_times to ADD_ADDR_RETRANS_MAX,
the callback-side retrans_times check suppresses further ADD_ADDR
retransmissions.
Note that when an ADD_ADDR is being prepared, a pure-ACK is queued. On
the output side, it means that it is fine to skip non-pure-ACK packets,
when drop_other_suboptions is set: a pure-ACK will be processed soon
after.
Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Signed-off-by: Li Xiasong <lixiasong1@huawei.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-2-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shardul Bankar [Fri, 15 May 2026 04:27:32 +0000 (06:27 +0200)]
mptcp: do not drop partial packets
When a packet arrives with map_seq < ack_seq < end_seq, the beginning
of the packet has already been acknowledged but the end contains new
data. Currently the entire packet is dropped as "old data," forcing
the sender to retransmit.
Instead, skip the already-acked bytes by adjusting the skb offset and
enqueue only the new portion. Update bytes_received and ack_seq to
reflect the new data consumed.
A previous attempt at this fix has been sent by Paolo Abeni [1], but had
issues [2]: it also added a zero-window check and changed rcv_wnd_sent
initialization, which caused test regressions. This version addresses
only the partial packet handling without modifying receive window
accounting.
Paolo Abeni [Tue, 19 May 2026 11:51:08 +0000 (13:51 +0200)]
Merge tag 'ovpn-net-20260514' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Included fixes:
* fix TCP selftest failures by reducing number of attempted pings
* fix RCU ptr deref outside of RCU read section
* fix UAF in case of TCP peer failed to be added to hashtable
* fix race condition between iface teardown and new peer being added
* ensure dstats are updated with BH disabled to avoid concurrency
* tag 'ovpn-net-20260514' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: disable BHs when updating device stats
ovpn: fix race between deleting interface and adding new peer
ovpn: respect peer refcount in CMD_NEW_PEER error path
ovpn: tcp - use cached peer pointer in ovpn_tcp_close()
selftests: ovpn: reduce remaining ping flood counts
====================
net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer
In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from
DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp()
re-reads the same field from the same DMA buffer for test_bit() and
pointer arithmetic.
DMA-coherent memory is mapped uncacheable on x86 and is shared,
unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes
directly to host-visible memory. A H/W can modify the value
between the check and the use, bypassing the bounds validation.
Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a
stack-local variable in mana_hwc_rx_event_handler(), and passing the
validated value as a parameter to mana_hwc_handle_resp().
A batch of small, independent fixes for the MediaTek MT7530 family DSA
driver, addressing long-standing correctness issues that surface on
hardware with bridge VLAN filtering enabled, on link-local frame
reception, and during bridge join/leave transitions.
====================
Edward Parker [Thu, 14 May 2026 14:05:12 +0000 (15:05 +0100)]
net: dsa: mt7530: untag VLAN-aware bridge PVID
With bridge VLAN filtering enabled on a port configured as untagged
member of the bridge PVID, ingress untagged frames do not reach the
corresponding bridge VLAN upper interface (br-lan.<vid>). ARP and
similar traffic is visible on the physical port but not delivered
to the VLAN sub-interface.
The MT7530/MT7531 forwards frames to the CPU port with the user
port's PVID tag applied even when the frame ingressed untagged on
the wire, because the CPU port is set to MT7530_VLAN_EG_CONSISTENT
and is a tagged member of the VLAN entry created for the bridge
VLAN. The DSA core then sees a hwaccel-tagged frame whose VID
matches the port's PVID, which the bridge does not treat as the
untagged-on-the-wire frame that the user expects.
Set ds->untag_vlan_aware_bridge_pvid in the mt7530 and mt7531
setup paths so the DSA core strips that hwaccel tag in software
when the parsed VID matches the bridge port's PVID, restoring the
on-the-wire frame as the bridge expects to see it.
Daniel Golle [Thu, 14 May 2026 14:04:50 +0000 (15:04 +0100)]
net: dsa: mt7530: fix CPU port VLAN not being reset to unaware
After a VLAN-aware bridge is destroyed, creating any VLAN-unaware
bridge loses all connectivity. The VID 0 VLAN table entry used by
VLAN-unaware ports in FALLBACK mode gets corrupted during VLAN-aware
operation: mt7530_hw_vlan_add() overwrites its EG_CON flag with
VTAG_EN and bridge teardown removes ports from its PORT_MEM.
The cleanup code that should restore it never runs because the current
port's dp->vlan_filtering flag is still true when checked (DSA updates
it only after the driver callback returns). Even when restored, the
deferred VLAN deletion events from the switchdev workqueue can corrupt
VID 0 again after the restoration.
Skip the current port in the all_user_ports_removed check, call
mt7530_setup_vlan0() to restore the VID 0 entry, and protect VID 0
from being modified by bridge VLAN operations in port_vlan_add and
port_vlan_del since it is managed exclusively by mt7530_setup_vlan0().
Remove the CPU port PCR and PVC register writes which were clobbering
PORT_VLAN mode and VLAN_ATTR with wrong values.
Daniel Golle [Thu, 14 May 2026 14:04:35 +0000 (15:04 +0100)]
net: dsa: mt7530: preserve VLAN tags on trapped link-local frames
The BPC, RGAC1 and RGAC2 registers control the handling of link-local
frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are
correctly trapped to the CPU port, but the egress VLAN tag attribute was
set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any
VLAN tags from trapped frames before they reach the CPU.
This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer
Delay Requests) to arrive at the CPU without their VLAN tag, so they
are delivered to the base network interface instead of the VLAN
sub-interface. The DSA local_termination selftest confirms this: all
link-local protocol tests on VLAN upper interfaces fail.
Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default)
so that the switch does not modify VLAN tags in trapped frames. This
way VLAN-tagged frames retain their original tag and are delivered to
the correct VLAN sub-interface, matching the behavior of non-trapped
frames which pass through without VLAN tag modification.
Daniel Golle [Thu, 14 May 2026 14:04:21 +0000 (15:04 +0100)]
net: dsa: mt7530: fix FDB entries not aging out with short timeout
The DSA forwarding selftests bridge_vlan_aware.sh and
bridge_vlan_unaware.sh configure the bridge with ageing_time set to
LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run
learning_test() in lib.sh, which expects a learned FDB entry to be
removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry
persisted past the deadline and the "Found FDB record when should
not" assertion failed.
With msecs=10000, the algorithm in mt7530_set_ageing_time() finds
AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the
search from tmp_age_count=0). The per-entry aging counter is
initialized to AGE_CNT when a MAC address is learned, so with
AGE_CNT=0 new entries start with a counter value of 0, which the
hardware treats as "already aged" and never removes, effectively
disabling aging.
Fix this by starting the search from tmp_age_count=1 to ensure
entries always have a non-zero initial aging counter. For a
10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead:
the timer ticks every 5 seconds and entries are removed after 2
ticks.
Starting the search at AGE_CNT=1 raises the minimum representable
ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time
of 1 second would now make the loop fall through without setting
age_count and age_unit, leaving them uninitialized when written to
the MT7530_AAC hardware register. Set ds->ageing_time_min and
ds->ageing_time_max so the DSA core validates the range before the
callback is invoked, and drop the now-redundant range check from
mt7530_set_ageing_time().
For ice:
Jake fixes a mismatch in locking around wait queue usage.
Jose Ignacio Tornos Martinez adjusts allowed lower bound for VF data
buffer size to accommodate low MTU sizes.
Marcin adjusts for -EEXIST to not trigger error path when the promisc
filter already exists as part of adding VLAN Ids.
Grzegorz fixes a few issues related to PTP. He adds locking to
ice_start_phy_timer_eth56g() to protect proper register programming.
Fixes the PTP lock used in 2xNAC configuration to always be the primary
and restores PTP configuration on ethtool channel changes.
For ixgbevf:
Michael Bommarito sets freed skb pointer to NULL to prevent
use-after-free.
For igc:
Kohei Enju resolves a couple of issues reported by Sashiko; setting
buffer type for an SMD skb and freeing skb on error of
igc_fpe_init_tx_descriptor().
====================
Kohei Enju [Fri, 15 May 2026 18:24:16 +0000 (11:24 -0700)]
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
Kohei Enju [Fri, 15 May 2026 18:24:15 +0000 (11:24 -0700)]
igc: set tx buffer type for SMD frames
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.
Fixes: 5422570c0010 ("igc: add support for frame preemption verification") Signed-off-by: Kohei Enju <kohei@enjuk.jp> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbevf: fix use-after-free in VEPA multicast source pruning
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible.
Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grzegorz Nitka [Fri, 15 May 2026 18:24:13 +0000 (11:24 -0700)]
ice: restore PTP Rx timestamp config after ethtool set-channels
When ethtool -L changes queue counts, ice_vsi_recfg_qs() closes and
rebuilds the VSI, reallocating Rx rings. The newly allocated rings have
ptp_rx cleared, so RX hardware timestamps are no longer attached to skb
until hwtstamp configuration is applied again.
Restore timestamp mode after ice_vsi_open() in the queue reconfiguration
path, matching reset/rebuild behavior and ensuring newly rebuilt Rx rings
have PTP RX timestamping re-enabled.
Testing hints:
- run ptp4l application in client synchronization mode:
ptp4l -i ethX -m -s
- run PTP traffic
- change queue number on ethX netdev interface:
ethtool -L ethX combined new_queue_size
- observe ptp4l output
- expected result: no "received DELAY_REQ without timestamp" messages
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Cc: stable@vger.kernel.org Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grzegorz Nitka [Fri, 15 May 2026 18:24:12 +0000 (11:24 -0700)]
ice: ptp: use primary NAC semaphore on E825
For E825 2xNAC configurations, PTP semaphore operations must hit the
primary NAC register block so both sides coordinate on the same lock.
Commit e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825
devices") updated other primary-only PTP register accesses to
use the primary NAC on non-primary functions, but left ice_ptp_lock()
and ice_ptp_unlock() operating on the local NAC. As a result, secondary
NAC PTP paths can take a different semaphore than the primary side.
Select the primary hardware in ice_ptp_lock() and ice_ptp_unlock() when
the current function is not primary, keeping semaphore operations
symmetric and consistent with the rest of the 2xNAC PTP register access
path.
Fixes: e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices") Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grzegorz Nitka [Fri, 15 May 2026 18:24:11 +0000 (11:24 -0700)]
ice: ptp: serialize E825 PHY timer start with PTP lock
ice_start_phy_timer_eth56g() programs TIMETUS registers and issues
INIT_INCVAL without holding the global PTP semaphore.
This allows concurrent PTP command paths to interleave with PHY timer
start, which can make the sequence fail and leave timer initialization
inconsistent.
Take the PTP lock around TIMETUS registers programming and INIT_INCVAL
command execution, and make sure the lock is released on all error paths.
Keep the subsequent sync step outside of this critical section, since
ice_sync_phy_timer_eth56g() takes the same semaphore internally.
Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Alexander Nowlin <alexander.nowlin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Szycik [Fri, 15 May 2026 18:24:10 +0000 (11:24 -0700)]
ice: fix setting promisc mode while adding VID filter
There are at least two paths through which VSI promiscuous mode can be
independently configured via ice_fltr_set_vsi_promisc():
- ice_vlan_rx_add_vid() (netdev op)
- ice_service_task() -> ... -> ice_set_promisc()
Both paths may try to program promiscuous mode concurrently. One such
scenario is:
1. Add ice netdev to bond
2. Add the bond netdev to bridge
3. ice netdev enters allmulticast mode (IFF_ALLMULTI)
4. Service task programs promisc mode filter
5. Bridge -> bond calls ice_vlan_rx_add_vid()
Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc()
returns any error, including -EEXIST. This causes VLAN filtering setup
to fail on the bond interface. ice_set_promisc() already handles -EEXIST
correctly.
Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the
promisc filter is already programmed, continue without returning error.
Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Cc: stable@vger.kernel.org Signed-off-by: Marcin Szycik <marcin.szycik@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice: fix VF queue configuration with low MTU values
The ice driver's VF queue configuration validation rejects
databuffer_size values below 1024 bytes, which prevents VFs from
using MTU values below 871 bytes.
The iavf driver calculates databuffer_size based on the MTU using:
databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128)
where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN).
For MTU values below 871:
MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected)
MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted)
The 1024-byte minimum seems unnecessarily restrictive, because the hardware
supports databuffer_size as low as 128 bytes (the alignment boundary),
which should allow MTU values down to the standard minimum of 68 bytes.
I haven't found the reason why the limit was configured in the commit 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so
with no more information and since it is working, change the minimum
databuffer_size validation from 1024 to 128 bytes to allow standard low
MTU values while still preventing invalid configurations.
Fixes: 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message")
cc: stable@vger.kernel.org Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller [Fri, 15 May 2026 18:24:08 +0000 (11:24 -0700)]
ice: fix locking around wait_event_interruptible_locked_irq
Commit 50327223a8bb ("ice: add lock to protect low latency interface")
introduced a wait queue used to protect the low latency timer interface.
The queue is used with the wait_event_interruptible_locked_irq macro, which
unlocks the wait queue lock while sleeping. The irq variant uses
spin_lock_irq and spin_unlock_irq to manage this. The wait queue lock was
previously locked using spin_lock_irqsave. This difference in lock variants
could lead to issues, since wait_event would unlock the wait queue and
restore interrupts while sleeping.
The ice_read_phy_tstamp_ll_e810() function is ultimately called through
ice_read_phy_tstamp, which is called from ice_ptp_process_tx_tstamp or
ice_ptp_clear_unexpected_tx_ready. The former is called through the
miscellaneous IRQ thread function, while the latter is called from the
service task work queue thread. Neither of these functions has interrupts
disabled, so use spin_lock_irq instead of spin_lock_irqsave.
Fixes: 50327223a8bb ("ice: add lock to protect low latency interface") Cc: stable@vger.kernel.org Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20250109181823.77f44c69@kernel.org/ Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20260515182419.1597859-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 18 May 2026 23:59:29 +0000 (16:59 -0700)]
Merge tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix small race windows in nf_ct_helper_log() when accessing helper,
from Florian Westphal.
2) Fix potential infinite loop and race conditions in IPVS caused by
frequent user-triggered service table changes, from Julia Anastasov.
3) Fix a race condition when dumping ipsets for restore,
from Jozsef Kadlecsik.
4) Fix inner transport offset in IPv6 in nft_inner when extension
headers come before the layer 4 transport header, from Yizhou Zhao.
5) Fix incorrect iteration over IPv4 ranges in several hash set types,
from Nan Li.
6) Fix incorrect order when restoring BH in nft_inner_restore_tun_ctx(),
from Florian Westphal.
7) Validate option array from ip6t_hbh checkpath() to fix an off-by-one
access, from Zhengchuan Liang.
8) Fix race condition between ipset list -terse and concurrent updates,
from Jozsef Kadlecisk.
9) Fix race condition when inserting elements into a hash bucket, also
from Jozsef.
10) Annotate access to first free slot in hashtable, from Jozsef Kadlecsik.
11) Ensure sufficient headroom in br_netfilter neigh transmission,
from Lorenzo Bianconi.
12) Hold reference on skb->dev in nfqueue exit path, bridge local input
is speciall since skb->dev != state->indev, allowing for net_device
to go away while packet is sitting in nfqueue. From Haoze Xie.
* tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_queue: hold bridge skb->dev while queued
netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge()
netfilter: ipset: annotate "pos" for concurrent readers/writers
netfilter: ipset: Fix data race between add and dump in all hash types
netfilter: ipset: Fix data race between add and list header in all hash types
netfilter: ip6t_hbh: reject oversized option lists
netfilter: nft_inner: release local_lock before re-enabling softirqs
netfilter: ipset: stop hash:* range iteration at end
netfilter: nft_inner: Fix IPv6 inner_thoff desync
netfilter: ipset: fix a potential dump-destroy race
ipvs: avoid possible loop in ip_vs_dst_event on resizing
netfilter: nf_conntrack_helper: fix possible null deref during error log
====================
Jakub Kicinski [Mon, 18 May 2026 23:40:04 +0000 (16:40 -0700)]
Merge tag 'for-net-2026-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- af_bluetooth: serialize accept_q access
- L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
- btmtk: accept too short WMT FUNC_CTRL events
- hci_qca: Convert timeout from jiffies to ms
* tag 'for-net-2026-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_qca: Convert timeout from jiffies to ms
Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
Bluetooth: serialize accept_q access
====================
Ilya Maximets [Thu, 14 May 2026 18:46:31 +0000 (20:46 +0200)]
openvswitch: vport: fix race between linking and the device notifier
Sashiko reports that it is technically possible that we got the device
reference, but by the time we're linking it to the OVS datapath, it
may be already in the process of being deleted. In this case if the
notifier wins the race for RTNL, it will see that the device is not
yet in the OVS datapath (ovs_netdev_get_vport() will fail in the
dp_device_event()) and will do nothing. Then the ovs_netdev_link()
will take the RTNL and link the unregistering device to OVS datapath.
Eventually, netdev_wait_allrefs_any() will re-broadcast the event and
the device will be properly detached, but it will take at least a
second before that happens, so it's not something we should rely on.
Let's avoid linking the non-registered device in the first place.
Note: As per documentation, RTNL doesn't protect the reg_state, but
it actually does for all the state transitions we care about here,
so it should not be necessary to use READ_ONCE or taking the instance
lock. We can still do that, but we have a few more places even in
this file where the reg_state is accessed without those while under
RTNL, and many more places like this across the kernel code, so it
might make more sense to change all of them in a more centralized
fashion in the future, if necessary.
Weiming Shi [Thu, 14 May 2026 12:25:12 +0000 (05:25 -0700)]
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Weiming Shi [Thu, 14 May 2026 12:38:08 +0000 (05:38 -0700)]
net: appletalk: fix NULL pointer dereference in aarp_send_ddp()
aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast
path without checking for NULL. When the device has no AppleTalk
interface configured (dev->atalk_ptr == NULL), this leads to a NULL
pointer dereference at the at->s_net access.
Dragos Tatulea [Wed, 13 May 2026 06:46:13 +0000 (09:46 +0300)]
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
Haoze Xie [Fri, 15 May 2026 03:19:02 +0000 (11:19 +0800)]
netfilter: nf_queue: hold bridge skb->dev while queued
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling.
Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Lorenzo Bianconi [Thu, 14 May 2026 14:46:38 +0000 (16:46 +0200)]
netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge()
neigh_hh_bridge() assumes the skb always has sufficient headroom to copy
the aligned L2 header. This assumption can trigger the crash reported
below using the following netfilter setup:
Fix the issue reallocating the skb headroom if necessary in neigh_hh_bridge routine.
Fixes: e179e6322ac33 ("netfilter: bridge-netfilter: Fix MAC header handling with IP DNAT") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Thu, 14 May 2026 08:55:13 +0000 (10:55 +0200)]
netfilter: ipset: annotate "pos" for concurrent readers/writers
The "pos" structure member of struct hbucket stores the first
free slot in the hash bucket of a hash type of set and there
are concurrent readers/writers. Annotate accesses properly.
Fixes: 18f84d41d34f ("netfilter: ipset: Introduce RCU locking in hash:* types") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: ipset: Fix data race between add and dump in all hash types
When adding a new entry to the next position in the existing hash bucket,
the position index was incremented too early and parallel dump could
read it before the entry was populated with the value. Move the setting
of the position index after populating the entry.
v2: Position counting fixed, noticed by Florian Westphal.
Jozsef Kadlecsik [Thu, 14 May 2026 08:55:11 +0000 (10:55 +0200)]
netfilter: ipset: Fix data race between add and list header in all hash types
The "ipset list -terse" command is actually a dump operation which
may run parallel with "ipset add" commands, which can trigger an
internal resizing of the hash type of sets just being dumped. However,
dumping just the header part of the set was not protected against
underlying resizing. Fix it by protecting the header dumping part
as well.
Fixes: c4c997839cf9 ("netfilter: ipset: Fix parallel resizing and listing of the same set") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary.
Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Nan Li <tonanli66@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Yizhou Zhao [Mon, 11 May 2026 17:30:41 +0000 (01:30 +0800)]
netfilter: nft_inner: Fix IPv6 inner_thoff desync
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization.
Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Assisted-by: GLM:5.1 Z.ai Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Thu, 14 May 2026 08:55:10 +0000 (10:55 +0200)]
netfilter: ipset: fix a potential dump-destroy race
When dumping sets in order to create the proper order for restore,
the list type of sets dumped last. Therefore internally we run the
dumping loop twice: first with all non-list type of sets and skipping
the list type ones and then secondly for the list type of sets.
Sashiko noticed that there's a potential race between dump and destroy
if in the first loop the last set was a list type of set: its pointer
remains unreferenced and a concurrent destroy can free it.
Fix the issue by resetting the variable holding the pointer.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Julian Anastasov [Sun, 10 May 2026 10:46:05 +0000 (13:46 +0300)]
ipvs: avoid possible loop in ip_vs_dst_event on resizing
Sashiko points out that unprivileged user can frequently
call ip_vs_flush() or ip_vs_del_service() to trigger
svc_table_changes updates that can lead to infinite loop
in ip_vs_dst_event(). This can also happen if the user
triggers frequent table resizing without deleting all
services. We should also consider the possible effects
if the user triggers many NETDEV_DOWN events.
One way to solve it is to hold svc_resize_sem in
ip_vs_dst_event() but this can block the dev notifier
during the whole resizing process.
Instead, use new rw_semaphore svc_replace_sem to protect just
the svc_table replacement which is a short code section.
Then hold svc_replace_sem in ip_vs_dst_event() to serialize
with replacing the svc_table. As result, loop is avoided
as there is no need to repeat the table walking from the
start. By this way changes in svc_table_changes can happen
only when all services are removed and all dev references
dropped which allows us to abort the table walking.
As IP_VS_WORK_SVC_NORESIZE is the flag used to stop the
svc_resize_work under service_mutex, we should check only
this flag often but not while under service_mutex.
To remove the mutex_trylock() for service_mutex in the
second phase where the resizer installs the new table
after rehashing, we will avoid holding the service_mutex
there. As result, the code in configuration context which
is under service_mutex should access ipvs->svc_table under
RCU because it can be replaced at anytime and released
after a RCU grace period. As for ip_vs_zero_all(), it needs
different solution as a table walker which can escape
single RCU read-side critical section: to hold the
svc_replace_sem to prevent table to be replaced.
In ip_vs_status_show() prefer to hold svc_replace_sem
to avoid many loops, just detect if the svc_table is
removed.
Prefer the newly attached table for the u_thresh/l_thresh
checks to know when to grow/shrink while adding or deleting
services because the new table size is based on the latest
parameters.
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu().
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Closes: https://sashiko.dev/#/patchset/20260420132051.217589-1-sgarzare%40redhat.com Reported-by: Maher Azzouzi <maherazz04@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Link: https://patch.msgid.link/20260514092948.268720-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sam Daly [Wed, 13 May 2026 16:42:53 +0000 (18:42 +0200)]
octeontx2-af: CGX: add bounds check to cgx_speed_mbps index
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range.
Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs") Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Linu Cherian <lcherian@marvell.com> Cc: Geetha sowjanya <gakula@marvell.com> Cc: hariprasad <hkelam@marvell.com> Cc: Subbaraya Sundeep <sbhatta@marvell.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: stable <stable@kernel.org> Signed-off-by: Sam Daly <sam@samdaly.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea [Wed, 13 May 2026 12:45:18 +0000 (15:45 +0300)]
IB/IPoIB: ndo_set_rx_mode_async conversion
The commit in the fixes tag added a warning for devices
that are netdev ops locked that they should be converted
to .ndo_set_rx_mode_async. IPoIB for mlx5 is such a
driver which was missed during the conversion because the
flow is more complex:
- mlx5 part of IPoIB device was converted to ops-lock in commit [1].
- ipoib_intf_init() then overrides netdev_ops with
ipoib_netdev_ops_{pf,vf}, which still wired ndo_set_rx_mode to the
legacy sync path -- tripping the new warning on every probe.
So now we have the following splat:
netdevice: ib0 (uninitialized): ops-locked drivers should use ndo_set_rx_mode_async
WARNING: net/core/dev.c:11366 at register_netdevice+0x83c/0x21d0
...
register_netdev+0x1f/0x40
ipoib_add_one+0x35c/0x880 [ib_ipoib]
This patch implements .ndo_set_rx_mode_async but it simply schedules the
multicast restart task like before. This is done to maintain the
assumption that this task and others [2] must run on the same order
workqueue to avoid racing with themselves. The race between
ipoib_mcast_join_task() and ipoib_mcast_restart_task() would be the most
obvious example.
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.
Sven Eckelmann [Wed, 13 May 2026 08:43:54 +0000 (10:43 +0200)]
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone
Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann <sven@narfation.org>
Sven Eckelmann [Wed, 13 May 2026 07:01:36 +0000 (09:01 +0200)]
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process.
Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reviewed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org>
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry.
Or Har-Toov [Wed, 13 May 2026 06:36:40 +0000 (09:36 +0300)]
net/mlx5: Skip disabled vports when setting max TX speed
When setting vports max TX speed during LAG activation or bond state
changes, the code iterates over all eswitch vports. However, some
vports may not be enabled yet.
Skip vports that are not enabled to avoid sending FW commands for
uninitialized vports. Save the LAG aggregated speed in the vport
struct so it can be applied when the vport is enabled later.
Fixes: 50f1d188c580 ("net/mlx5: Propagate LAG effective max_tx_speed to vports") Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260513063640.334132-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeroen Massar [Wed, 13 May 2026 06:33:02 +0000 (09:33 +0300)]
net/mlx5: Do not restore destination-less TC rules
After IPsec policy/state TX rules are added, any TC flow rule, which
forwards packets to uplink, is modified to forward to IPsec TX tables.
As these tables are destroyed dynamically, whenever there is no
reference to them, the destinations of this kind of rules must be
restored to uplink, unless there is no destination for that rule.
The flow rules FLOW_ACTION_ACCEPT, DROP, TRAP, GOTO and SAMPLE do not
have a destination port, and thus out_count = 0.
At cleanup time of the rules in mlx5_esw_ipsec_modify_flow_dests
we call mlx5_eswitch_restore_ipsec_rule but as the above types
do not have a destination we get an underflow of out_count, as
the port is passed, which is esw_attr->out_count - 1.
This change avoids calling mlx5_eswitch_restore_ipsec_rule when
there are no output destinations and thus avoids the underflow.
Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules") Signed-off-by: Jeroen Massar <jmassar@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260513063302.333761-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Wed, 13 May 2026 06:27:37 +0000 (09:27 +0300)]
net/mlx5e: Don't leak RSS context in case of error
If mlx5e_rx_res_rss_set_rxfh() fails during mlx5e_create_rxfh_context(),
the RSS context is not cleaned up.
This leaves a stale entry in 'res->rss[rss_idx]' that occupies a context
slot.
Destroy the RSS context before returning the error.
Fixes: 6c2509d44636 ("net/mlx5e: Add error flow for ethtool -X command") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260513062737.333259-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chuck Lever [Wed, 13 May 2026 12:58:25 +0000 (08:58 -0400)]
tls: Preserve sk_err across recvmsg() when data has been copied
The sk_err check in tls_rx_rec_wait() consumes the error via
sock_error(), which clears sk_err atomically. When the caller
(tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already
has bytes copied to userspace, it returns those bytes and discards
the error from this call. sk_err is now zero on the socket, so the
next read syscall observes only RCV_SHUTDOWN and reports a clean
EOF instead of the actual error (typically -ECONNRESET).
The race is reachable when tls_read_flush_backlog()'s periodic
sk_flush_backlog() triggers tcp_reset() in the middle of a
multi-record read.
Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is
false, consume sk_err via sock_error() as before. When has_copied
is true, report the error from READ_ONCE() but leave sk_err set:
the caller returns the byte count and discards the err from this
call, and the next read syscall surfaces the preserved sk_err. This
mirrors the tcp_recvmsg() preserve-and-surface pattern.
The decrypt-abort path is unaffected: tls_err_abort() raises
sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing
on the caller's return path consumes it, so the EBADMSG surfaces
on the next read.
tls_sw_splice_read() passes has_copied=false: it processes
one record per call, so no bytes have been copied within the
function when tls_rx_rec_wait() runs. A reset that arrives
between iterations of splice_direct_to_actor() (the sendfile()
path) is still consumed by sock_error() in the later call, and the
outer loop returns the prior iterations' byte count and drops the
error. tcp_splice_read() exhibits the same pattern at the iteration
boundary; addressing it belongs at the splice_direct_to_actor()
layer and is out of scope here.
Fixes: c46b01839f7a ("tls: rx: periodically flush socket backlog") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dawei Feng [Wed, 13 May 2026 15:13:20 +0000 (23:13 +0800)]
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware.
William Bowling [Wed, 13 May 2026 04:16:35 +0000 (04:16 +0000)]
net: skbuff: preserve shared-frag marker during coalescing
skb_try_coalesce() can attach paged frags from @from to @to. If @from
has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same
externally-owned or page-cache-backed frags, but the shared-frag marker
is currently lost.
That breaks the invariant relied on by later in-place writers. In
particular, ESP input checks skb_has_shared_frag() before deciding
whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP
receive coalescing has moved shared frags into an unmarked skb, ESP can
see skb_has_shared_frag() as false and decrypt in place over page-cache
backed frags.
Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged
frags. The tailroom copy path does not need the marker because it copies
bytes into @to's linear data rather than transferring frag descriptors.
Fixes: cef401de7be8 ("net: fix possible wrong checksum generation") Fixes: f4c50a4034e6 ("xfrm: esp: avoid in-place decrypt on shared skb frags") Signed-off-by: William Bowling <vakzz@zellic.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260513041635.1289541-1-vakzz@zellic.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matt Fleming [Wed, 13 May 2026 11:22:26 +0000 (12:22 +0100)]
net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover
mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after
mlx5e_safe_reopen_channels() has torn down and freed the channel (and
its embedded SQs). Replace the three sq->netdev references with
priv->netdev which is safe because priv outlives channel teardown.
The netdev_err() call already used priv->netdev for this reason; make
the trylock/unlock and health_channel_eq_recover calls consistent.
This fixes the following KASAN splat:
BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277
Maoyi Xie [Tue, 12 May 2026 14:28:07 +0000 (22:28 +0800)]
rds_tcp: close NULL deref window in rds_tcp_set_callbacks
rds_tcp_set_callbacks() links a new rds_tcp_connection onto
rds_tcp_tc_list under rds_tcp_tc_list_lock. It releases the
lock, then assigns tc->t_sock = sock outside the lock.
rds_tcp_tc_info() and rds6_tcp_tc_info() walk rds_tcp_tc_list
under the same lock. Both dereference tc->t_sock->sk without
a NULL check.
A reader can acquire rds_tcp_tc_list_lock between the writer's
spin_unlock and the t_sock store. It then sees a list entry
whose t_sock is NULL. The dereference of tc->t_sock->sk is a
NULL access.
Move tc->t_sock = sock inside rds_tcp_tc_list_lock, before
list_add_tail. A reader holding the lock then observes the
linkage and the t_sock store together.
The restore path is safe. rds_tcp_restore_callbacks() does
list_del_init inside the lock. The matching tc->t_sock = NULL
after unlink is harmless to readers holding the lock.
Fixes: 70041088e3b9 ("RDS: Add TCP transport to RDS") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg> Reviewed-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260512142807.1855619-1-maoyi.xie@ntu.edu.sg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / kernel / linux.git / log
