Linus Torvalds [Sun, 31 May 2026 18:50:39 +0000 (11:50 -0700)]
Merge tag 'media/v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- rc: igorplugusb: fix control request setup packet
- vsp1: revert a couple patches to fix regressions when setting DRM
pipelines
* tag 'media/v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rc: igorplugusb: fix control request setup packet
Revert "media: renesas: vsp1: brx: Fix format propagation"
Revert "media: renesas: vsp1: Initialize format on all pads"
Linus Torvalds [Sun, 31 May 2026 15:52:16 +0000 (08:52 -0700)]
Merge tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the clearcpuid= boot parameter less prominent
and warn about its dangers & caveats (Borislav Petkov)
- Do not access the (new) PLATFORM_ID MSR when running
as a guest (Borislav Petkov)
- x86 ftrace: Relocate %rip-relative percpu refs in dynamic
trampolines, to fix crash when using such trampolines
(Alexis Lothoré)
- Fix x86-64 CFI build error (Peter Zijlstra)
- Revert FPU signal return magic number check optimization,
because it broke CRIU and gVisor in certain FPU configurations
(Andrei Vagin)
* tag 'x86-urgent-2026-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/fpu: Refine and simplify the magic number check during signal return"
x86/kvm/vmx: Fix x86_64 CFI build
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
x86/microcode: Do not access MSR_IA32_PLATFORM_ID when running as a guest
Documentation/arch/x86: Hide clearcpuid=
Linus Torvalds [Sun, 31 May 2026 15:45:08 +0000 (08:45 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes, the only one of significance being the change to
kick queues in SDEV_CANCEL which had a small window for stuck
requests.
The major driver fixes are the one to the FC transport class to widen
the FPIN counter to counter a theoretical (and privileged) fabric
traffic injection attack and the other is an iscsi fix where a
malicious target could trick the kernel into an output buffer overrun.
Both the driver fixes were AI assisted"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()
scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion
scsi: devinfo: Add BLIST_NO_RSOC for Promise VTrak E310f
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
Linus Torvalds [Sun, 31 May 2026 15:33:08 +0000 (08:33 -0700)]
Merge tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- davinci: fix fallback bus frequency on missing clock-frequency
- virtio: mark device ready initially
* tag 'i2c-for-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: virtio: mark device ready before registering the adapter
i2c: davinci: fix division by zero on missing clock-frequency
Linus Torvalds [Sun, 31 May 2026 15:27:18 +0000 (08:27 -0700)]
Merge tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- updates to Elan I2C touchpad driver to handle a new IC type and to
validate size of supplied firmware to prevent OOB access
- updates to Xpad controller driver to recognize ASUS ROG RAIKIRI II
and "Nova 2 Lite" from GameSir controllers as well as a fix to
prevent a potential OOB access when handling "Share" button
- an update to Synaptics touchpad driver to use RMI mode for touchpad
in Thinkpad E490
- updates to Atmel MXT driver adding checks to prevent potential OOB
accesses
- a fix to IMS PCU driver to free correct amount of memory when tearing
it down
- a fixup to the recent change to Atlas buttons driver
- a small cleanup in fm801-fp for PCI IDs table initialisation
* tag 'input-for-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()
Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490
Input: atlas - check ACPI_COMPANION() against NULL
Input: atmel_mxt_ts - check mem_size before calculating config memory size
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
Input: fm801-gp - simplify initialisation of pci_device_id array
Input: xpad - add "Nova 2 Lite" from GameSir
Input: xpad - add support for ASUS ROG RAIKIRI II
Input: elan_i2c - validate firmware size before use
Input: xpad - fix out-of-bounds access for Share button
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
Input: elan_i2c - increase device reset wait timeout after update FW
Input: elan_i2c - add ic type 0x19
Linus Torvalds [Sun, 31 May 2026 00:05:58 +0000 (17:05 -0700)]
Merge tag 'v7.1-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix uninitialized variable in smb2_writev_callback()
- detect short folioq copy in cifs_copy_folioq_to_iter()
* tag 'v7.1-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix uninitialized variable in smb2_writev_callback
smb: client: detect short folioq copy in cifs_copy_folioq_to_iter()
Linus Torvalds [Sat, 30 May 2026 22:39:47 +0000 (15:39 -0700)]
Merge tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fixes from Mike Rapoport:
"Two kexec handover regression fixes:
- fix order calculation for kho_unpreserve_pages() to make sure sure
that the order calculation in kho_unpreserve_pages() mathes the
order calculation in kho_preserve_pages().
- fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with
16KB pages"
* tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix order calculation for kho_unpreserve_pages()
kho: fix KHO_TREE_MAX_DEPTH for non-4KB page sizes
Linus Torvalds [Sat, 30 May 2026 22:37:05 +0000 (15:37 -0700)]
Merge tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix regression from memblock_free_late() refactoring
After refactoring of memblock_free_late() and free_init_pages() it
became possible to call memblock_free() after memblock init data was
discarded.
Make sure memblock_free() does not touch memblock.reserved unless it
is called early enough or when ARCH_KEEP_MEMBLOCK is enabled"
* tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: don't touch memblock arrays when memblock_free() is called late
Henri A [Wed, 20 May 2026 14:25:44 +0000 (10:25 -0400)]
media: rc: igorplugusb: fix control request setup packet
Commit eac69475b01f ("media: rc: igorplugusb: heed coherency
rules") changed the control request storage from an embedded struct to
an allocated pointer so it can obey DMA coherency rules.
However, the driver still passes &ir->request to usb_fill_control_urb().
That points the URB setup packet at the pointer field itself rather than
at the allocated struct usb_ctrlrequest.
USB core then interprets pointer bytes as the setup packet. This can
produce an invalid bRequestType and trigger the control direction warning
reported by syzbot:
usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0
Pass ir->request itself as the setup packet.
Fixes: eac69475b01f ("media: rc: igorplugusb: heed coherency rules") Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51 Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5.5 Signed-off-by: Henri A <contact@henrialfonso.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Linus Torvalds [Sat, 30 May 2026 15:37:45 +0000 (08:37 -0700)]
Merge tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt fixes from Greg KH:
"Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device)
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits)
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
usb: dwc2: Fix use after free in debug code
usb: chipidea: core: convert ci_role_switch to local variable
usb: gadget: f_fs: serialize DMABUF cancel against request completion
usb: gadget: f_fs: copy only received bytes on short ep0 read
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
dt-bindings: usb: Fix EIC7700 USB reset's issue
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints
usb: storage: Add quirks for PNY Elite Portable SSD
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
usb: usbtmc: check URB actual_length for interrupt-IN notifications
xhci: tegra: Fix ghost USB device on dual-role port unplug
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
...
Linus Torvalds [Sat, 30 May 2026 15:34:03 +0000 (08:34 -0700)]
Merge tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: dz: Enable modular build
serial: zs: Convert to use a platform device
serial: dz: Convert to use a platform device
serial: zs: Switch to using channel reset
serial: zs: Fix bootconsole handover lockup
serial: dz: Fix bootconsole handover lockup
serial: dz: Fix bootconsole message clobbering at chip reset
serial: 8250_dw: dispatch SysRq character in dw8250_handle_irq()
serial: 8250: dispatch SysRq character in serial8250_handle_irq()
serial: core: introduce guard(uart_port_lock_check_sysrq_irqsave)
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
serial: altera_jtaguart: handle uart_add_one_port() failures
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
tty: add missing tty_driver include to tty_port.h
serial: qcom-geni: fix UART_RX_PAR_EN bit position
serial: sh-sci: fix memory region release in error path
tty: serial: pch_uart: add check for dma_alloc_coherent()
serial: zs: Fix swapped RI/DSR modem line transition counting
Alexis Bouzigues [Fri, 29 May 2026 14:28:14 +0000 (09:28 -0500)]
i2c: virtio: mark device ready before registering the adapter
virtio_i2c_probe() synchronously probes child i2c drivers on the bus,
but peripherals may use the bus at probe for tasks like reading a chip
id. The vhost-user-i2c backend stalls at such probes unless DRIVER_OK
is already set before the virtqueue is first kicked.
Set DRIVER_OK explicitly before i2c_add_adapter(), as done for the
same reason in commit f5866db64f34 ("virtio_console: enable VQs
early") and commit 71e4b8bf0482 ("virtio_rpmsg: set DRIVER_OK before
using device").
Signed-off-by: Alexis Bouzigues <BouziguesAlexis@JohnDeere.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Linus Torvalds [Sat, 30 May 2026 04:50:56 +0000 (21:50 -0700)]
Merge tag 'v7.1-rc6-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- security fix for FSCTL_SET_SPARSE
- fix leak in ksmbd_query_inode_status()
- fix OOB read in smb_check_perm_dacl()
* tag 'v7.1-rc6-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE
ksmbd: release ksmbd_inode ref via ksmbd_inode_put on lookup paths
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Linus Torvalds [Sat, 30 May 2026 02:08:20 +0000 (19:08 -0700)]
Merge tag 'drm-fixes-2026-05-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular pull, doesn't seem too insane or AI owned, couple of UAF fixes
and another repair for an earlier fix, mostly amdgpu and i915 display
with xe/i915 accel, and misc core/driver fixes.
It might be a bit bigger than usual at this stage, but I'm not seeing
anything too scary here.
dumb-buffer:
- prevent overflows in dumb-buffer creation
dma-buf:
- fix UAF in dma_buf_fd() tracepoint
gem:
- fix for the fix for the fix for the change handle ioctl
i915:
- Fix potential UAF in TTM object purge
- Use polling when irqs are unavailable
- Fix HDR pre-CSC LUT programming loop
- Block DC states on vblank enable when Panel Replay supported
- Use DC_OFF wake reference to block DC6 on vblank enable
* tag 'drm-fixes-2026-05-30' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/gem: fix race between change_handle and handle_delete
drm: prevent integer overflows in dumb buffer creation helpers
dma-buf: fix UAF in dma_buf_fd() tracepoint
drm/amdgpu: fix calling VM invalidation in amdgpu_hmm_invalidate_gfx
drm/amdgpu: fix amdgpu_hmm_range_get_pages
drm/amdgpu/userq: use array instead of list for userq_vas
drm/amdgpu/userq: move mqd_destroy to later stage to keep core obj valid
drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger
drm/amdgpu/userq: remove amdgpu_userq_create/destroy_object wrapper
drm/amd/pm/si: Disregard vblank time when no displays are connected
drm/amdkfd: Check for pdd drm file first in CRIU restore path
drm/amdgpu: fix potential overflow in fs_info.debugfs_name
drm/amdgpu/userq: make sure queue is valid in the hang_detect_work
drm/amdgpu/userq: reserve root bo without interruption
drm/amdgpu/userq: add amdgpu_bo_unpin when amdgpu_ttm_alloc_gart fails
drm/amdgpu: simplify return value in amdgpu_userq_get_doorbell_index
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
drm/amd/display: Write REFCLK to 48MHz on DCN21
drm/amdgpu/userq: Fix the mutex_init cleanup for fence_drv_lock
drm/amdgpu/userq: Fix doorbell object cleanup of queue
...
Linus Torvalds [Sat, 30 May 2026 01:07:37 +0000 (18:07 -0700)]
Merge tag 'spi-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One substantive fix here, fixing corruption of the maximum frequency
for spi-mem operations which caused users to remember what should have
been a temporarily modified maximum frequency as the standard going
forward, potentially causing instability when the modification raised
rather than lowered the frequency.
We also have a trivial patch which just documents the correct way to
describe the Qualcomm IPQ5210 SNAND controller in the DT, there are no
code changes"
* tag 'spi-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-mem: avoid mutating op template in spi_mem_supports_op()
spi: dt-bindings: spi-qpic-snand: Add ipq5210 compatible
Linus Torvalds [Fri, 29 May 2026 23:39:56 +0000 (16:39 -0700)]
Merge tag 'regmap-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Some other fixing in an API user turned up the fact that we weren't
correctly applying cache only mode to volatile registers in
regmap_update_bits(), causing us to try to access hardware that was
powered off or otherwise not in a state to accept I/O. This fix
returns an error instead, avoiding more serious consequences"
* tag 'regmap-fix-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: reject volatile update_bits() in cache-only mode
Linus Torvalds [Fri, 29 May 2026 22:46:40 +0000 (15:46 -0700)]
Merge tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"Quick follow up, nothing super urgent here. Main reason I'm sending
this out is because the IPsec and Bluetooth PRs did not make it
yesterday. I don't want to have to send you all of this + whatever
comes next week, for rc7. The fixes under "Previous releases -
regressions" are for real user-reported regressions from v7.0.
Previous releases - regressions:
- Revert "ipv6: preserve insertion order for same-scope addresses"
- xfrm: move policy_bydst RCU sync, a fix which added a sync RCU on
netns exit got backported to stable and was causing serious
accumulation of dying netns's for real workloads
- pcs-mtk-lynxi: fix bpi-r3 serdes configuration
Previous releases - always broken:
- usual grab bag of race, locking and leak fixes for Bluetooth
- handful of page handling fixes for IPsec"
* tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
wireguard: send: append trailer after expanding head
Revert "ipv6: preserve insertion order for same-scope addresses"
net: skbuff: fix pskb_carve leaking zcopy pages
ipv6: fix possible infinite loop in fib6_select_path()
ipv6: fix possible infinite loop in rt6_fill_node()
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
vsock/virtio: bind uarg before filling zerocopy skb
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
net: pcs: pcs-mtk-lynxi: fix bpi-r3 serdes configuration
sctp: fix race between sctp_wait_for_connect and peeloff
net: mana: Skip redundant detach on already-detached port
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
...
Linus Torvalds [Fri, 29 May 2026 22:17:53 +0000 (15:17 -0700)]
Merge tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux
Pull clang build fix from Nathan Chancellor:
"A small fix to disable -Wattribute-alias for clang in the few places
it is already disabled for GCC, now that tip of tree clang has
implemented -Wattribute-alias as GCC has"
* tag 'clang-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nathan/linux:
Disable -Wattribute-alias for clang-23 and newer
Andrei Vagin [Tue, 26 May 2026 20:50:43 +0000 (20:50 +0000)]
Revert "x86/fpu: Refine and simplify the magic number check during signal return"
This reverts
dc8aa31a7ac2 ("x86/fpu: Refine and simplify the magic number check during signal return").
The aforementioned commit broke applications that construct signal frames in
userspace (such as CRIU and gVisor) if the frame's xstate size is smaller than
the kernel's fpstate->user_size.
Furthermore, this introduces a critical issue for checkpoint/restore tools
like CRIU. If a process is checkpointed while inside a signal handler, its
stack contains a signal frame formatted according to the source host's xstate
capabilities.
If that process is later restored on a destination host with larger xstate
capabilities (e.g., a newer CPU with more features enabled, resulting in
a larger fpstate->user_size), the kernel will look for FP_XSTATE_MAGIC2 at the
destination host's larger user_size offset instead of the offset encoded in
the frame's fx_sw->xstate_size.
This causes the magic2 check to fail, forcing sigreturn to silently fall back
to "FX-only" mode. Upon return from the signal handler, the process's extended
state is reset to initial values instead of being restored, leading to silent
data corruption.
The aforementioned commit cited
d877550eaf2d ("x86/fpu: Stop relying on userspace for info to fault in xsave buffer")
as justification to stop relying on userspace for the magic number check.
However, these two changes are fundamentally different. The last one only
changed how much memory the kernel ensures is paged-in before running XRSTOR
to prevent an infinite loop. It did not change the signal frame format or how
the layout is validated.
Reverting this change restores the use of fx_sw->xstate_size for
locating magic2 and restores the necessary sanity checks, ensuring that
the signal frame remains self-describing and portable.
[ bp: Massage commit message. ]
Fixes: dc8aa31a7ac2 ("x86/fpu: Refine and simplify the magic number check during signal return") Signed-off-by: Andrei Vagin <avagin@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Chang S. Bae <chang.seok.bae@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20260429000623.3356606-1-avagin@google.com
Zhenghang Xiao [Tue, 26 May 2026 08:53:13 +0000 (16:53 +0800)]
drm/gem: fix race between change_handle and handle_delete
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path.
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260526085313.26791-1-kipreyyy@gmail.com
Linus Torvalds [Fri, 29 May 2026 20:47:55 +0000 (13:47 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Restore CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC to its former glory by
making sure the config symbol is correctly spelled out in the code
- Don't reset the AArch32 view of the PMU counters to zero when the
guest is writing to them
- Fix an assorted collection of memory leaks in the newly added
tracing code
- Fix the capping of ZCR_EL2 which could be used in an unsanitised
way by an L2 guest
x86:
- Include the kernel's linux/mman.h in KVM selftests to ensure
MADV_COLLAPSE is defined, as older libc versions may not provide
it.
- Include execinfo.h if and only if KVM selftests are building
against glibc, and provide a test_dump_stack() for non-glibc
builds.
- Silence an annoying RCU splat on (even non-KVM-related) panics.
The splat is technically legit, but in practice not an issue. To
have a race, you would need to unload the KVM modules at exactly
the time a panic happens; and speaking of incredibly rare races,
taking the locks risks introducing a deadlock if the module unload
code took the lock on a CPU that has been halted. Which seems
possibly more likely than the RCU grace period issue, so just shut
it up. This code used to be in KVM but is now outside it; but the
x86 maintainers haven't picked it up, so here we are.
- Rate-limit global clock updates once again (but without delayed
work), as KVM was subtly relying on the old rate-limiting for NPT
correction to guard against "update storms" when running without a
master clock on systems with overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty"
instead of marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the
CPU TLB doesn't contain AVIC-tagged entries for the APIC base GPA.
- The top 10 commits fix buffer overflow (and potential TOC/TOU)
flaws in the page state change protocol for encrypted VMs. AI
models find it quite easily given it was reported three times, but
aren't as good at writing a comprehensive fix. There's more to
clean up in the area, which will come in 7.2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
KVM: SEV: Check PSC request indices against the actual size of the buffer
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
KVM: SEV: Ignore Port I/O requests of length '0'
KVM: SEV: Reject MMIO requests larger than 8 bytes with GHCB v2+
KVM: SEV: Ignore MMIO requests of length '0'
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
KVM: arm64: Fix memory leak in hyp_trace_unload()
KVM: arm64: Fix rollback in hyp_trace_buffer_share_hyp()
KVM: arm64: Fix meta-page unsharing in pKVM hyp tracing
KVM: arm64: PMU: Preserve AArch32 counter low bits
KVM: SVM: Flush the current TLB when transitioning from xAVIC => x2AVIC
KVM: x86: Fix ERAPS RAP clear on INVPCID single-context invalidation
KVM: arm64: Fix CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC
KVM: selftests: Guard execinfo.h inclusion for non-glibc builds
KVM: x86: Rate-limit global clock updates on vCPU load
...
wireguard: send: append trailer after expanding head
With how this is currently written, we add the trailer, zero it out, and
then add the header space on. If that header space requires a
reallocation + copy, the zeros in the trailer aren't copied, because the
skb len hasn't actually been yet expanded to cover that. Instead add the
padding at the end of the process rather than at the beginning.
Revert "ipv6: preserve insertion order for same-scope addresses"
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Pavel Begunkov [Thu, 28 May 2026 18:43:53 +0000 (19:43 +0100)]
net: skbuff: fix pskb_carve leaking zcopy pages
When SKBFL_MANAGED_FRAG_REFS is set, frag pages are not refcounted but
their lifetime is controlled by the attached ubuf_info. To make a copy
of the skb_shared_info, we either should clear the flag and reference
the frags, or keep the flag and have frags unreferenced.
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() don't
follow the rule and thus can leak page references. Let's clear
SKBFL_MANAGED_FRAG_REFS from the original skb to fix it. It's the
simplest way to address it, but there are more performant ways to do
that if it ever becomes a problem.
Jiayuan Chen [Wed, 27 May 2026 05:31:31 +0000 (13:31 +0800)]
ipv6: fix possible infinite loop in fib6_select_path()
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiayuan Chen [Wed, 27 May 2026 05:31:30 +0000 (13:31 +0800)]
ipv6: fix possible infinite loop in rt6_fill_node()
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yuqi Xu [Wed, 27 May 2026 03:48:15 +0000 (11:48 +0800)]
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry.
Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data") Cc: stable@kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Yuqi Xu <xuyq21@lenovo.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/8b129d10566aa3eb43f61a8f9757bcf51707d324.1779636774.git.xuyq21@lenovo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jingguo Tan [Wed, 27 May 2026 02:33:01 +0000 (10:33 +0800)]
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Signed-off-by: Lin Ma <malin89@huawei.com> Signed-off-by: Rongzhen Cui <cuirongzhen@huawei.com> Signed-off-by: Jingguo Tan <tanjingguo@huawei.com> Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260527023301.1075581-1-malin89@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
Use READ_ONCE() when reading entries/indices from the guest-accessible
Page State Change buffer to defend against TOCTOU bugs.
Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing
(and not consuming the result!), as the guest isn't supposed to touch the
buffer while it's being processed. I.e. using READ_ONCE() is all about
protecting against misbehaving guests.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-11-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Check PSC request indices against the actual size of the buffer
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
Stop explicitly passing the PSC buffer to snp_begin_psc(): it *must*
be the scratch area. This will allow fixing a variety of bugs without
further complicating the code.
No functional change intended.
Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
Now that all paths in KVM properly validate the length needed for the
scratch area, and are guaranteed to pass in a non-zero length, WARN if KVM
attempts to configured the scratch area with min_len==0 to guard against
future bugs.
Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
When handling a Page State Change (PSC) #VMGEXIT use the size of the PSC
header as the minimum size for the scratch area. Per the GHCB spec, PSC
requests do NOT provide the length, i.e. using control->exit_info_2 for the
length is completely made up behavior. The existing code "works", e.g.
even though Linux-as-a-guest always passes '0', because KVM doesn't do
anything with the length when the request is in the GHCB's shared buffer.
Use the header as the min length. Once the header is retrieved, KVM can
use the specified indices to compute the full size of the request.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0.
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly ignore MMIO requests of length '0', so that setting up the
software scratch area (and other code) doesn't have to worry about
underflowing the length, and to allow for special casing '0' in the
future.
Fixes: 8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michael Roth [Fri, 1 May 2026 20:22:26 +0000 (13:22 -0700)]
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
As per the GHCB spec, when using GHCB v2+ require the software scratch area
to reside in the GHCB's shared buffer. Note, things like Page State Change
(PSC) requests _rely_ on this behavior, as the guest can't provide a length
when making the request, i.e. the size of the guest payload is bounded by
the size of the shared buffer.
Failure to force usage of the GHCB, and a slew of other flaws, lets a
malicious SNP guest corrupt host kernel heap memory, and leak host heap
layout information.
setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2),
where exit_info_2 is guest-controlled. With exit_info_2=24, this yields
a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer
holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only
entries[0] and entries[1] are in-bounds.
snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253)
but NOT against the actual buffer size:
idx_end = hdr->end_entry;
if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer
snp_complete_psc(svm, ...);
return 1;
}
for (idx = idx_start; idx <= idx_end; idx++) {
entry_start = entries[idx]; // OOB when idx >= 2
The guest sets end_entry=10+, causing the host to iterate entries[2+]
which are OOB into adjacent slab objects. For each OOB entry:
- The host reads 8 bytes (OOB READ / info leak oracle)
- If the data passes PSC validation, __snp_complete_one_psc() writes
cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806)
- If validation fails, the error response reveals whether adjacent
memory is zero vs non-zero (information disclosure to guest)
The guest controls allocation size (exit_info_2), entry range
(cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly
hit different slab positions.
By exploiting the variety of bugs, a malicious SEV-SNP guest can:
- OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure)
- OOB write cur_page bits into adjacent objects (heap corruption)
- Trigger use-after-free conditions across VMGEXITs
E.g. with KASAN enabled, a single insmod of the PoC guest module
produces 73 KASAN reports:
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890
Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890
Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199
The buggy address belongs to the object at ffff888XXXXXXXXX
which belongs to the cache kmalloc-cg-32 of size 32
The buggy address is located N bytes to the right of
allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX)
Linus Torvalds [Fri, 29 May 2026 17:36:57 +0000 (10:36 -0700)]
Merge tag 'io_uring-7.1-20260529' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix for a regression introduced in this cycle, where
we should ensure the node is visible before the entry is added to
the tctx list"
* tag 'io_uring-7.1-20260529' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/tctx: set ->io_uring before publishing the tctx node
Paolo Bonzini [Fri, 29 May 2026 17:28:16 +0000 (19:28 +0200)]
Merge tag 'kvm-x86-fixes-7.1-rc6' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 7.1-rcN
- Include the kernel's linux/mman.h in KVM selftests to ensure MADV_COLLAPSE
is defined, as older libc versions may not provide it.
- Include execinfo.h if and only if KVM selftests are building against glibc,
and provide a test_dump_stack() for non-glibc builds.
- Fudge around an RCU splat in the emegerncy reboot code that is technically
a legitimate flaw, but in practice is a non-issue and fixing the flaw, e.g.
by adding locking, would incur meaningful risk, i.e. do more harm than good.
- Rate-limit global clock updates once again (but without delayed work), as
KVM was subtly relying on the old rate-limiting for NPT correction to guard
against "update storms" when running without a master clock on systems with
overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty" instead of
marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the CPU TLB
doesn't contain AVIC-tagged entries for the APIC base GPA.
Linus Torvalds [Fri, 29 May 2026 17:04:09 +0000 (10:04 -0700)]
Merge tag 'cxl-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- cxl/test: update mock dev array before calling platform_device_add()
* tag 'cxl-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Update mock dev array before calling platform_device_add()
* tag 'iommu-fixes-v7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add my employer to my entries
MAINTAINERS: Add Vasant Hegde to reviewers of AMD IOMMU
iommu, debugobjects: avoid gcc-16.1 section mismatch warnings
iommu/vt-d: Simplify calculate_psi_aligned_address()
Linus Torvalds [Fri, 29 May 2026 15:55:41 +0000 (08:55 -0700)]
Merge tag 'sound-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of recent small fixes and quirks.
We still see a bit more changes than wished, but most of them are
device-specific ones that are pretty safe to apply, while a core fix
is a typical UAF fix for PCM core that was recently caught by fuzzer;
so overall nothing looks really worrisome.
Core:
- Fix a UAF in PCM OSS proc interface
HD-audio:
- Fix memory leaks in CS35L56 driver
- Various device-specific quirks for Realtek and CS420x codecs
USB-audio:
- Quirk for TAE1160 USB Audio
- Fix for Scarlett2 Gen4 direct monitor gain
ASoC:
- Fixes for QCom q6asm-dai, Intel bytcht_es8316, and simple-mux codec
FireWire:
- Fix for Motu DSP event queue protection"
* tag 'sound-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: codecs: simple-mux: Fix enum control bounds check
ALSA: usb-audio: Add iface reset and delay quirk for TAE1160 USB Audio
ALSA: hda/cs420x: Add CS4208 fixup for iMac16,1
ALSA: hda/realtek: add quirk for HP Dragonfly Folio G3 2-in-1
ALSA: hda/realtek: Fix speaker output on ASUS ROG Strix G615LP
ASoC: qcom: q6asm-dai: use pointer type with kzalloc_obj()
ASoC: qcom: q6asm-dai: remove unnecessary braces
ASoC: qcom: q6asm-dai: fix error handling in prepare and set_params
ASoC: qcom: q6asm-dai: close stream only when running
ASoC: qcom: q6asm-dai: do not set stream state in event and trigger callbacks
ASoC: Intel: bytcht_es8316: Fix MCLK leak on init errors
ALSA: hda/realtek: Limit mic boost on Positivo DN140
ALSA: scarlett2: Fix 2i2 Gen 4 direct monitor gain on firmware 2417
ALSA: pcm: oss: Fix setup list UAF on proc write error
ALSA: hda: cs35l56: Fix system name string leaks
ALSA: hda/realtek: Add HDA_CODEC_QUIRK for Lenovo Yoga Slim 7 14AGP11
ALSA: hda/realtek: Fix incorrect comment for ALC299_FIXUP_PREDATOR_SPK
ALSA: firewire-motu: Protect register DSP event queue positions
The change to format propagation in the BRx broke configuration of the
DRM pipeline. Revert it to fix the regression.
The original commit was meant to fix a v4l2-compliance failure, with no
known userspace applications being affected beside test tools. Reverting
is the simplest option, a more comprehensive fix can be developed (and
tested more thoroughly) later.
The change to format initialization, along with the change to format
propagation in the BRx in commit 937f3e6b51f1 ("media: renesas: vsp1:
brx: Fix format propagation"), broke configuration of the DRM pipeline.
Revert it to fix the regression.
The original commit was meant to fix a v4l2-compliance failure, with no
known userspace applications being affected beside test tools. Reverting
is the simplest option, a more comprehensive fix can be developed (and
tested more thoroughly) later.
Fixes: 133ac42af0a1 ("media: renesas: vsp1: Initialize format on all pads") Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/T2H Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/20260506215650.1897177-2-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Mark Brown [Thu, 28 May 2026 23:01:44 +0000 (00:01 +0100)]
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2
(which traps) or ZCR_EL1 (which does not trap). KVM handles both in
different way:
- on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own
VL limit. This has the potential to break existing SW that relies
on the full LEN field to be stateful.
- on ZCR_EL1 access, we do absolutely nothing.
On restoring the SVE context for an L2 guest, we directly restore the
guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the
guest's view of the register was updated using the ZCR_EL2 accessor,
the value has already been sanitised (with the caveat mentioned above).
But if the guest used ZCR_EL1, the raw value is written into the HW,
and the L2 guest can now access VLs that it shouldn't.
Fix all the above by moving the VL capping to the restore points,
ensuring that:
- the HW is always programmed with a capped value, irrespective of
the accessor being used,
- the ZCR_EL2.LEN field is always completely stateful, irrespective
of the accessor being used.
Additionally, move ZCR_EL2 to be a sanitised register, ensuring that
only the LEN field is actually stateful. This requires some creative
construction of the RES0 mask, as the sysreg generation script does
not yet generate RAZ/WI fields.
Rajat Gupta [Thu, 21 May 2026 05:11:21 +0000 (22:11 -0700)]
drm: prevent integer overflows in dumb buffer creation helpers
Fix integer overflow issues in the dumb buffer creation path:
1. drm_mode_create_dumb() does not bound width, height, or bpp
before passing them to driver callbacks. Downstream helpers
(e.g. drm_gem_dma_dumb_create_internal) perform pitch/size
alignment in u32 arithmetic that can overflow for extreme
values. Add hard limits: width and height < 8192, bpp <= 32.
No legitimate software rendering use case exceeds these.
2. drm_mode_align_dumb() uses roundup(pitch, hw_pitch_align)
without checking for overflow. If pitch is near U32_MAX,
roundup() wraps to a small value, making subsequent
check_mul_overflow() pass with a much smaller pitch than
intended. Add an overflow check after roundup.
3. drm_mode_align_dumb() uses ALIGN(size, hw_size_align) which
only works correctly for power-of-two alignment values.
Replace with roundup() which works for any alignment.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Dave Airlie [Fri, 29 May 2026 01:12:48 +0000 (11:12 +1000)]
Merge tag 'drm-intel-fixes-2026-05-27' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix potential UAF in TTM object purge (Janusz Krzysztofik)
- Use polling when irqs are unavailable [aux] (Michał Grzelak)
- Fix HDR pre-CSC LUT programming loop [color] (Pranay Samala)
- Block DC states on vblank enable when Panel Replay supported [psr] (Jouni Högander)
- Use DC_OFF wake reference to block DC6 on vblank enable [psr] (Jouni Högander)
Commit 8871389da151 introduces common pcs dts properties which writes
rx=normal,tx=normal polarity to register SGMSYS_QPHY_WRAP_CTRL of switch.
This is initialized with tx-bit set and so change inverts polarity
compared to before.
It looks like mt7531 has tx polarity inverted in hardware and set tx-bit
by default to restore the normal polarity.
The MT7531 datasheet quite clearly states:
Register 000050EC QPHY_WRAP_CTRL -- QPHY wrapper control
Reset value: 0x00000501
BIT 1 RX_BIT_POLARITY -- RX bit polarity control
1'b0: normal
1'b1: inverted
BIT 0 TX_BIT_POLARITY -- TX bit polarity control (TX default inversed
in MT7531)
1'b0: normal
1'b1: inverted
Till this patch the register write was only called when mediatek,pnswap
property was set which cannot be done for switch because the fw-node param
was always NULL from switch driver in the mtk_pcs_lynxi_create call.
Do not configure switch side like it's done before.
Fixes: 8871389da151 ("net: pcs: pcs-mtk-lynxi: deprecate "mediatek,pnswap"") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20260526153239.30194-1-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 May 2026 00:02:54 +0000 (17:02 -0700)]
Merge tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Rework hci_dev_do_reset() to use hci_sync functions
- hci_conn: Fix memory leak in hci_le_big_terminate()
- hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
- hci_sync: Reset device counters in hci_dev_close_sync()
- hci_sync: fix UAF in hci_le_create_cis_sync
- L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
- L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
- L2CAP: use chan timer to close channels in cleanup_listen()
- L2CAP: clear chan->ident on ECRED reconfiguration success
- ISO: fix UAF in iso_recv_frame
- ISO: serialize iso_sock_clear_timer with socket lock
- HIDP: fix missing length checks in hidp_input_report()
- 6lowpan: check skb_clone() return value in send_mcast_pkt()
- btusb: Allow firmware re-download when version matches
- hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
* tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
Bluetooth: btusb: Allow firmware re-download when version matches
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
====================
Zhenghang Xiao [Wed, 27 May 2026 03:24:11 +0000 (11:24 +0800)]
sctp: fix race between sctp_wait_for_connect and peeloff
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept.
Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20260527032411.60959-1-kipreyyy@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: mana: Fix NULL dereferences during teardown after attach failure
When mana_attach() fails (e.g. during queue allocation), the error
cleanup frees apc->tx_qp and apc->rxqs and sets them to NULL. Multiple
subsequent teardown paths can then dereference these NULL pointers,
causing kernel panics.
Patch 1 adds NULL guards in the low-level teardown functions
(mana_fence_rqs, mana_destroy_vport, mana_dealloc_queues) so they are
safe to call regardless of queue initialization state. This covers all
callers: mana_remove(), mana_change_mtu() recovery, and internal error
paths in mana_alloc_queues().
Patch 2 adds an early exit in mana_detach() for already-detached ports,
making it safe for non-close callers. This allows the queue reset
handler to safely retry mana_attach() without redundant teardown.
====================
Dipayaan Roy [Mon, 25 May 2026 08:08:25 +0000 (01:08 -0700)]
net: mana: Skip redundant detach on already-detached port
When mana_per_port_queue_reset_work_handler() runs after a previous
detach succeeded but attach failed, the port is left in a detached
state with apc->tx_qp and apc->rxqs already freed. Calling
mana_detach() again unconditionally leads to NULL pointer dereferences
during queue teardown.
Add an early exit in mana_detach() when the port is already in
detached state (!netif_device_present) for non-close callers, making
it safe to call idempotently. This allows the queue reset handler and
other recovery paths to simply retry mana_attach() without redundant
teardown.
Fixes: 3b194343c250 ("net: mana: Implement ndo_tx_timeout and serialize queue resets per port.") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20260525081129.1230035-3-dipayanroy@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dipayaan Roy [Mon, 25 May 2026 08:08:24 +0000 (01:08 -0700)]
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
When queue allocation fails partway through, the error cleanup frees
and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as
mana_remove(), mana_change_mtu() recovery, and internal error handling
in mana_alloc_queues() can subsequently call into functions that
dereference these pointers without NULL checks:
- mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer
dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26).
- mana_destroy_vport() iterates apc->rxqs without a NULL check.
- mana_fence_rqs() iterates apc->rxqs without a NULL check.
- mana_dealloc_queues() iterates apc->tx_qp without a NULL check.
Add NULL guards for apc->rxqs in mana_fence_rqs(),
mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a
NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue
draining when TX queues were never allocated or already freed.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20260525081129.1230035-2-dipayanroy@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 28 May 2026 20:45:10 +0000 (13:45 -0700)]
Merge tag 'acpi-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"Fix three issues in the ACPI button driver: a possible crash due to a
button press after unloading the driver (introduced during the 6.15
development cycle), function keys breakage on Toshiba Tecra X40 due to
missing ACPI events (introduced during the 7.0 development cycle), and
a missing probe rollback path item that has not been added by mistake
during a recent update"
* tag 'acpi-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: button: Add missing device class clearing on probe failures
ACPI: button: Enable wakeup GPEs for ACPI buttons at probe time
ACPI: button: Fix ACPI GPE handler leak during removal
Linus Torvalds [Thu, 28 May 2026 20:13:48 +0000 (13:13 -0700)]
Merge tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
Linus Torvalds [Thu, 28 May 2026 19:36:39 +0000 (12:36 -0700)]
Merge tag 'gpio-fixes-for-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling in gpio-mxc
- fix scoped_guard() usage in gpio-adnp
- don't accept partial writes in gpio-virtuser debugfs interface as
they can't really work correctly
- fix resource leaks in gpio-rockchip
- fix locking issues in remove path in shared GPIO management
- undo the vote of a GPIO shared proxy virtual device on GPIO release
* tag 'gpio-fixes-for-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: rockchip: teardown bugs and resource leaks
gpio: rockchip: convert bank->clk to devm_clk_get_enabled()
gpio: virtuser: Fix uninitialized data bug in gpio_virtuser_direction_do_write()
gpio: shared: fix lockdep false positive by removing unneeded lock
gpio: shared: fix deadlock on shared proxy's parent removal
gpio: adnp: fix flow control regression caused by scoped_guard()
gpio: shared: undo the vote of the proxy on GPIO free
gpio: mxc: fix irq_high handling
Linus Torvalds [Thu, 28 May 2026 18:45:41 +0000 (11:45 -0700)]
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
Reported-by: Nicholas Carlini <npc@anthropic.com> Cc: David Howells <dhowells@redhat.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Paul Moore <paul@paul-moore.com> Cc: James Morris James Morris <jmorris@namei.org> Cc: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lee Jones [Wed, 27 May 2026 16:05:26 +0000 (17:05 +0100)]
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing.
Cc: stable@vger.kernel.org Fixes: 5ae6e89f7409 ("HID: wacom: implement the finger part of the HID generic handling") Tested-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
David Carlier [Sat, 23 May 2026 18:14:46 +0000 (19:14 +0100)]
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely.
Reported-by: syzbot+7f4987d0afb97dd090cb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f4987d0afb97dd090cb Fixes: 281a22631423 ("dma-buf: add some tracepoints to debug.") Cc: stable@vger.kernel.org # 7.0.x Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patch.msgid.link/20260523181446.69525-1-devnexen@gmail.com
regmap: reject volatile update_bits() in cache-only mode
Prevent _regmap_update_bits() from accessing hardware when the register
map is in cache-only mode.
Unlike regmap_raw_read() and _regmap_read(), the volatile
_regmap_update_bits() fast path bypasses the cache_only check. This can
result in unexpected hardware accesses while the device is suspended.
Return -EBUSY to ensure behavior is consistent with other cache-only
access paths.
Clang recently added support for -Wattribute-alias [1], which results in
the same warnings that necessitated commit bee20031772a ("disable
-Wattribute-alias warning for SYSCALL_DEFINEx()") for GCC.
kernel/time/itimer.c:325:1: error: alias and aliasee have different types 'long (unsigned int)' and 'long (typeof (__builtin_choose_expr((__builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0LL)) || __builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0ULL))), 0LL, 0L)))' (aka 'long (long)') [-Werror,-Wattribute-alias]
325 | SYSCALL_DEFINE1(alarm, unsigned int, seconds)
| ^
include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1'
225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
| ^
include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx'
236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^
include/linux/syscalls.h:251:18: note: expanded from macro '__SYSCALL_DEFINEx'
251 | __attribute__((alias(__stringify(__se_sys##name)))); \
| ^
kernel/time/itimer.c:325:1: note: aliasee is declared here
include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1'
225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
| ^
include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx'
236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^
include/linux/syscalls.h:255:18: note: expanded from macro '__SYSCALL_DEFINEx'
255 | asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
| ^
<scratch space>:16:1: note: expanded from here
16 | __se_sys_alarm
| ^
Disable the warnings in the same way for clang-23 and newer. Disable the
warning about unknown warning options to avoid breaking the build for
versions of clang-23 that do not have -Wattribute-alias, such as ones
deployed by vendors like Android or CI systems or when bisecting LLVM
between llvmorg-23-init and release/23.x.
Marco Scardovi [Tue, 26 May 2026 17:02:46 +0000 (19:02 +0200)]
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi <scardracs@disroot.org> Link: https://patch.msgid.link/20260526171050.12785-3-scardracs@disroot.org
[Bartosz: don't emit an error message on devres allocation failure] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Marco Scardovi [Tue, 26 May 2026 17:02:45 +0000 (19:02 +0200)]
gpio: rockchip: convert bank->clk to devm_clk_get_enabled()
The bank->clk was previously obtained via of_clk_get() and manually
prepared/enabled. However, it was missing a corresponding clk_put() in
both the error paths and the remove function, leading to a reference leak.
Convert the allocation to devm_clk_get_enabled(), which also properly
propagates failures from clk_prepare_enable() that were previously ignored.
The GPIO bank device uses the same OF node as the previous of_clk_get()
call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same
clock provider entry.
Fix the reference leak and simplify the code by removing the manual
clk_disable_unprepare() calls in the probe error paths and in the
remove function.
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi <scardracs@disroot.org> Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Dan Carpenter [Mon, 25 May 2026 07:15:16 +0000 (10:15 +0300)]
gpio: virtuser: Fix uninitialized data bug in gpio_virtuser_direction_do_write()
If *ppos is non-zero (user-space write split over multiple calls to
write()) then simple_write_to_buffer() won't initialize the start of the
buffer. Really, non-zero values for *ppos aren't going to work at all.
Check for that and return -EINVAL at the start of the function.
Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://patch.msgid.link/ahP3BJWWy-m_qI0X@stanley.mountain Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
gpio: shared: fix lockdep false positive by removing unneeded lock
By the time gpio_device_teardown_shared() is called, the parent device
is gone from the global list of GPIO devices and all outstanding SRCU
read-side critical sections have completed. That means that no
concurrent gpio_find_and_request() can call
gpio_shared_add_proxy_lookup() for this device at this time. There's
also no risk of the parent device being re-bound to the driver before
the unbinding completes (including the child devices).
Lockdep produces a false-positive report about a possible circular
dependency as it doesn't know the ordering guarantee. Not taking the
ref->lock in gpio_device_teardown_shared() silences it and is safe to do.
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation.
gpio: adnp: fix flow control regression caused by scoped_guard()
scoped_guard() is implemented as a for loop. Using it to protect code
using the continue statement changes the flow as we now only break out
of the hidden loop inside scoped_guard(), not the original for loop. Use
a regular code block instead.
Fixes: c7fe19ed3973 ("gpio: adnp: use lock guards for the I2C lock") Reported-by: David Lechner <dlechner@baylibre.com> Closes: https://lore.kernel.org/all/cde2abb2-4cc8-4fc9-b34a-0c5d2b95779f@baylibre.com/ Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260522073527.9812-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
gpio: shared: undo the vote of the proxy on GPIO free
When the user of a shared GPIO managed by gpio-shared-proxy calls
gpiod_put() to release it, we never undo the potential "vote" for
driving the shared line "high". In the free() callback, check if this
proxy voted for "high" and - if so - decrease the number of votes and
potentially revert the value to low if this is the last user.
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2dc ("Bluetooth: When HCI work queue is drained, only queue chained work") Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
The current HCI reset function in hci_core.c duplicates most of the work
done by hci_dev_close_sync(), and doesn't handle LE, advertising or
discovery.
Instead of porting these to hci_dev_do_reset(), directly call the
close/open functions from hci_sync to reset the hdev. MGMT now notifies
when a user performs a reset.
Suggested-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Wed, 27 May 2026 04:59:18 +0000 (04:59 +0000)]
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites.
Fixes: ccf74f2390d60a2f9a75ef496d2564abb478f46a ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Muhammad Bilal [Wed, 27 May 2026 04:59:17 +0000 (04:59 +0000)]
Bluetooth: ISO: fix UAF in iso_recv_frame
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded.
Fixes: ccf74f2390d60a2f9a75ef496d2564abb478f46a ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal <meatuni001@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zhenghang Xiao [Tue, 26 May 2026 10:51:52 +0000 (18:51 +0800)]
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Santhosh Kumar K [Wed, 27 May 2026 17:37:36 +0000 (23:07 +0530)]
spi: spi-mem: avoid mutating op template in spi_mem_supports_op()
spi_mem_supports_op() accepts a const struct spi_mem_op pointer but
casts away const internally to call spi_mem_adjust_op_freq(). This
mutates the caller's op template, which causes stale max_freq values
when callers reuse persistent templates - subsequent calls won't
re-apply the device frequency cap since spi_mem_adjust_op_freq()
skips non-zero values.
Fix by operating on a stack-local copy instead.
Fixes: a4f8e70d75dd ("spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()") Cc: Tianyu Xu <xtydtc@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://patch.msgid.link/20260527173736.2243004-1-s-k6@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
Paolo Abeni [Thu, 28 May 2026 12:05:31 +0000 (14:05 +0200)]
Merge branch 'dpll-zl3073x-various-fixes'
Ivan Vecera says:
====================
dpll: zl3073x: various fixes
Three fixes for the zl3073x DPLL driver.
Patch 1 exports __dpll_device_change_ntf() for use by drivers that
need to send device change notifications from within callbacks
already running under dpll_lock.
Patch 2 replaces the change_work workqueue mechanism with direct
calls to __dpll_device_change_ntf(), eliminating a race condition
where the work handler could dereference a freed dpll_dev pointer
during device teardown.
Patch 3 moves the freq_monitor flag from per-DPLL to per-device
scope to match the hardware behavior where frequency measurement
registers are shared across all DPLL channels.
====================
Ivan Vecera [Tue, 26 May 2026 07:45:25 +0000 (09:45 +0200)]
dpll: zl3073x: make frequency monitor a per-device attribute
The frequency monitoring feature uses shared hardware registers
that measure input reference frequencies independently of
individual DPLL channels. However, the freq_monitor flag was
incorrectly placed in the per-DPLL structure, causing each
channel to track its own enable/disable state independently.
Since the DPLL core calls measured_freq_get() only for the first
pin registration, the measured_freq_check() in the periodic worker
was gated by the per-DPLL freq_monitor flag of whichever channel
happens to be checked. If the first DPLL channel had frequency
monitoring disabled while another had it enabled, measurements
were never reported.
Move freq_monitor from struct zl3073x_dpll to struct zl3073x_dev
so all DPLL channels share a single flag, matching the hardware
behavior. Update freq_monitor_set() to notify other DPLL devices
about the change (like phase_offset_avg_factor_set() already does)
and remove the mode-dependent guard in zl3073x_dpll_changes_check()
since all input pin monitoring (pin state, phase offset, FFO, and
measured frequency) works correctly in all DPLL modes.
Ivan Vecera [Tue, 26 May 2026 07:45:24 +0000 (09:45 +0200)]
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer.
Ivan Vecera [Tue, 26 May 2026 07:45:23 +0000 (09:45 +0200)]
dpll: export __dpll_device_change_ntf() for use under dpll_lock
Export __dpll_device_change_ntf() so that drivers can send device
change notifications from within device callbacks, which are already
called under dpll_lock. Using dpll_device_change_ntf() in that
context would deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Joerg Roedel [Thu, 28 May 2026 07:53:17 +0000 (09:53 +0200)]
MAINTAINERS: Add Vasant Hegde to reviewers of AMD IOMMU
Vasant has a long history of providing valuable feedback and testing
results for the AMD IOMMU code. Still, too often he gets not Cc'ed on
code changes, so make his reviewer status official.
====================
net/handshake: anchor request lifetime to a pinned file reference
handshake_nl_accept_doit() has accumulated four follow-on fixes
since 3b3009ea8abb ("net/handshake: Create a NETLINK service for
handling handshake requests"): 7ea9c1ec66bc, 7798b59409c3, fe67b063f687, and dabac51b8102. Each was a local refcount or
NULL-check correction; none moved where the file reference is
owned, and the same code keeps producing the same class of bug.
Reworking the ownership is what breaks the pattern.
For the duration of a request, sock->file has no single owner.
Submit publishes the request without taking a file reference;
accept_doit acquires one inside the handler, after the request
has already left the pending list. The consumer can drop its
own reference at any time, including the moment between
handshake_req_next() popping the request and accept_doit
reaching get_file(). The submit-side sock_hold() pins only
struct sock; struct socket and sock->file remain under the
consumer's control via the file descriptor.
This series places the file reference under unambiguous
ownership. handshake_req_submit() pins it on the request and
completion or cancel drops it (patches 4-5); the submit-side
sock_hold() then becomes redundant, and dropping it also closes
a publish-before-pin race the late sock_hold itself opened
(patch 6). The handshake_complete() API and its consumers move
to a uniform negative-errno sign convention (patch 3), with the
matching sign correction in nvme-tcp (patch 2). Patch 1
hardens hn_lock for BH context, the netns-exit drain fix
builds on the new file-pin infrastructure (patch 8), and new
KUnit file-count assertions verify the refcount contract
(patch 7).
Three things in this restructuring want a careful look. In
handshake_complete(), the fput() of the request's file
reference has to come after hp_done() -- fput() can transitively
run handshake_sk_destruct() and free the request, so the patch
stashes hr_file in a local first. handshake_sk_destruct()
itself is kept on purpose: it owns rhashtable removal and
kfree, and remains the backstop if a consumer path bypasses
handshake_complete() entirely. Third, handshake_req_next() now
returns its request with an extra get_file() held under
hn_lock; accept_doit must consume that reference (FD_PREPARE on
success, explicit fput on the fdf.err path), and any future
caller has to honor the same contract.
projects / thirdparty / kernel / stable.git / log
